Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

When you enable photo stream on your Mac, in imports photos currently in your photo stream.  However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them.  When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99).  Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

Similar Messages

  • Can someone explain the hyperthreading settings in cmos (the 4x,5x, etc.)?

    Someone once said admitting you don't know something is the first step on the road to knowledge....or something like that 
    Can someone explain the hyperthreading setting in the CMOS Setup - mine is set to 5x, which I think is correct for my cpu - Venice 3500+, but I don't really know what it does.  What does that setting affect?  I think it was 4x by default, until I loaded optimal settings, and it went to 5x.....

    HT = Hyper Transport
    Q: What is HyperTransport™ technology?
    A: HyperTransport™ technology is a new high speed, high performance point-to-point link for interconnecting integrated circuits on a motherboard. It can be significantly faster than a PCI bus for an equivalent number of pins. HyperTransport was previously codenamed Lightning Data Transport, or LDT. HyperTransport technology was invented by AMD and perfected with the help of several partners throughout the industry. It is primarily targeted for the IT and Telecomm industries, but any application where high speed, low latency and scalability is necessary can potentially take advantage of HyperTransport technology. HyperTransport technology was invented in order to unleash the tremendous power of the AMD microprocessors. HyperTransport is planned to bring the computation experience to a  new level.
    Hyperthreading Technology used by Intel.

  • Can someone explain the difference between width, maxWidth, explicitWidth, explicitMaxWidth?

    Can someone explain the difference between width, maxWidth,  explicitWidth, explicitMaxWidth of the UI component? I read the API and I  have no idea what do they mean.

    Width is the current width.  ExplicitWidth is set if you give an component
    an explicit width vs a temporary width via setActualSize.
    MaxWidth and minWidth factor in either the measuredMax/MinWidth or one set
    explicitly.

  • Cffunction and how to ? can someone explain the code to me line by line

    Hello i went to get this online and i want to test it.
    the udf is supposed to
    * CSVFormat accepts the name of an existing query and
    converts it to csv format.
    * Updated version of UDF orig. written by Simon Horwith
    my question how to break it down.
    can someone explain the code to me line by line
    thanks

    silviasalsa wrote:
    > thanks
    >
    > but line by line
    >
    > what is
    > if(ArrayLen(Arguments) GTE 2) qualifier = Arguments[2];
    > if(ArrayLen(Arguments) GTE 3 AND Len(Arguments[3]))
    columns = Arguments[3];
    > returnValue[1] = ListQualify(columns, qualifier);
    > ArrayResize(returnValue, query.recordcount + 1);
    > columns = ListToArray(columns);
    > for(i = 1; i LTE query.recordcount; i = i + 1)
    > {
    > rowValue = ArrayNew(1);
    > ArrayResize(rowValue, ArrayLen(columns));
    > for(j = 1; j LTE ArrayLen(columns); j = j + 1)
    > rowValue[j] = qualifier & query[columns[j]]
    & qualifier;
    > returnValue[i + 1] = ArrayToList(rowValue);
    > }
    > returnValue = ArrayToList(returnValue, Chr(13));
    > return returnValue;
    > }
    >
    > thanks
    Apparently this UDF takes two optional parameters so that one
    can define
    (A) a text "qualifier" to use in the CSV file, this is
    usually the
    single quote|tick ['] mark - but sometimes one wants this to
    be a
    different character and (B) what columns to use in the
    output in case
    one does not want to use all the columns in the record set
    in the
    outputted CSV file.
    The if statements are checking for these optional parameters
    and if
    found setting the values in them to internal variables.
    These
    variables are then used in the rest of the logic to create
    the CSV output.
    HTH
    Ian

  • Can someone explain the use of a hashtable in java?

    can someone explain the use of a hashtable in java?

    Hashtable allows us to store values along with keys.
    One other advantage is, it provides Synchronised methods.
    Hope you got it.

  • My app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    I am having the exact same problem.  MacForums has been helping me, and I called Apple.  After trying everyone's suggestions, and Apple's, no success.
    My App Store app still says "incomplete or damaged."  There is even a circle with a line through it on the icon.  Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion).  Did not work.  I also updated the software from "Software Update".  Rebooted.
    I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was.  I wonder if the person above who had the same problem also installed a SSD?
    Anyway, anymore ideas?  Even Apple is stumped.
    (In answer to the other post above, my Quicktime works fine.)
    Message was edited by: mrivmriv
    Just did some more reading.  I was going by the icon in the dock.  When I checked in Finder, there it was, fixed and brand new!!  Thanks, anyway.
    Message was edited by: mrivmriv

  • Can Someone Explain the order of things Using Swingworker?

    Hi:
    Can someone explain very clearly the order of things using Swingworker? Please do not refer the SUN tutorials. I am totally dead in the water with a very large application and the order of things is not sensible. Also, if the worker thread is too long, the GUI gets updated, but my progress bar (killed right after in the finished method) remains running in some instances only.
    Can someone explain any debugging methods for thread work?
    I am a veteran programmer of 19 years and this one's got me. The event dispatch thread returns immediate, the GUI responds well, but the progress bar setVisible(false); ... just after in the finished() method (on Event Dispatch thread) does not go away, continues running, only on very long (large query) work. I'm truly stumped. I have successful applications of the Swingworker use, the progress bar, and everything works fine. Not this one.
    Debugging threads is what I need. Or some tool that visually shows threads as the program runs.
    Thanks for any help,
    PiratePete

    Thanks. I guess I should count my blessings when using free stuff. But I have been impressed with what the J2SDK has to offer. I have been writing a complicated application that I am going to market and most of my problems have been "design" in nature.
    Thanks again,
    PiratePete

  • HT4436 I don't see the point of having to create another email account - could someone explain the thinking behind this please?

    For iCloud syncing there are a few items that require a new iCoud email address to be created (eg. Notes and email), whilst the majority of other options do not require this.
    My question is simply why do these items need yet another email address to be created?  I would have though the Apple Id would have been sufficient to hang everything together...
    If someone could explain the thinking behind this please I will hopefully be more comfortable with it and probably more likely to start using these features!
    Thanks in advance!
    Stuart

    If TCP port 25 isn't open, then SMTP services won't work.  That's the port that all SMTP servers use to communicate amongst themselves.    (Sure, you can change the port your SMTP server is listening on, but you'd also have to change the port processing on all of the other SMTP servers around — and if you did manage to implement that change everywhere, the local network folks would likely just block the new port for the same reasons they blocked the old port.)
    If you have a public static IP address and have correct forward and reverse translations — host domain to IP address, and IP address to host domain name — then you don't need and very likely don't want to run your own DNS server. 
    More to help you learn how these pieces fit together and not something I'd expect you would need given you have a public static IP and public DNS here is a detailed DNS server configuration article for OS X Server; enable Show All Records and it applies to Server.app on 10.7 and later.  If you have questions after reading that, I can certainly answer them and also update the article to try to reduce the confusion or answer the question.
    Your host didn't have valid reverse DNS, so you'll want to get that cleared up, and you'll want to get the port blocks cleared, or work with the local network folks to set up a relay through one of the existing mail servers.

  • Can someone explain the tables tab under function parameter declaration ?

    Hello,
    when declaring a function, part of its parameter interface is the tables tab. So if in FUNCTION1 i  declare a table: tdraw like draw  (optional)
    what does that mean ? does this mean that tdraw will be a table of type draw and at the same time it will be filled up with the same contents as draw has ?
    then how can other function (func2) use FUNCTION1 and its table ?
    so if inside func2  i also have an internal table AA like draw :
    so inside func2 i say:
    call function1
    tables:tdraw = AA
    does this mean that it will assign the result tdraw table of function1 to AA ?
    can someone explain details of internal tables and passing them as parameters ?
    and which table is assigned to which ?
    thank you

    Hi hassan,
    If you are talking about the tables parameter in SE37, when you declare a table tdraw like draw it only means you are declaring an internal table of type draw but the contents are not filled into it.
    In the source code of the program you have to write the code to fetch the data to tdraw and do the manipulations accordingly.
    Also, the tables you are declaring can be like the input table or can be used for output table.
    suppose u have 2 tables tab1 and tab2, tab1 you are going to input the values to it and the calculated values have to be in another table, you can use tab2 as the result table.
    hope it helps.
    award points if it helps.

  • Can someone explain the message about replacing songs when importing a CD?

    If this is somewhere, I have not been able to find the answer. When importing a CD, sometimes I get a message that asks if I want to replace existing songs. Can someone explain what this message means? I have tried replacing the songs and not replacing the songs, but I don't see any meaningful differences.
    Thanks!

    You should sort the list on the Album column, ideally as Album by Artist. Generally all you need to do after that is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Can someone explain the code for having the Accordion panels closed?

    I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
    This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
    <script type="test/javascript">
    var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
    </script>
    Angela

    GPDMTR25 wrote:
    I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
    This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
    <script type="test/javascript">
    var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
    </script>
    Angela
    Hi Angela,
    You are right, the only way it will work is by setting the fixed height to false. As for the for the default panel option, -1 is not a panel and if you had 3 panels we could have used the number 3 (panel1 = 0) or 99 or whatever as long as there is no panel with that number. If we had used the number 1 for instance, then the 2nd panel would be opened by default.
    Hope this helps.
    Ben

  • Can someone explain the "colors" channel of the histogram?

    I'm using CS4 on a Mac
    Could someone explain the "colors" channel of the histogram? Does it simply analyze the image in terms of the % of pixels that are
    *blue
    *cyan
    *green
    *yellow
    *red
    *magenta
    *grey

    Good day!
    It represents which number of pixels have which values in the respective Channel, the refreshed total ("Pixels") is the total number of pixels (image or Selection).
    Regards,
    Pfaffenbichler

  • XIR3 - Can someone explain the port number behaviour?

    I have two questions regarding some of the port numbers that are appearing on my list. Can someone explain this behaviour?They are as follows:
    tcp        0      0 *:1025                      :                         LISTEN      22856/boe_fcprocd
    tcp        0      0 *:16577                     :                         LISTEN      21571/boe_jobsd
    tcp        0      0 *:1026                      :                         LISTEN      15772/boe_fcprocd
    tcp        0      0 *:16583                     :                         LISTEN      21614/boe_fccached
    tcp        0      0 *:16584                     :                         LISTEN      21560/boe_jobsd
    tcp        0      0 *:16585                     :                         LISTEN      21612/boe_fcprocd
    tcp        0      0 *:16586                     :                         LISTEN      21635/boe_jobsd
    tcp        0      0 *:16587                     :                         LISTEN      21616/boe_eventsd
    tcp        0      0 *:16588                     :                         LISTEN      21629/boe_filesd
    tcp        0      0 *:48300                     :                         LISTEN      21326/boe_cmsd
    tcp        0      0 *:46093                     :                         LISTEN      12366/boe_cmsd
    tcp        0      0 *:16525                     :                         LISTEN      12366/boe_cmsd
    tcp        0      0 *:16591                     :                         LISTEN      21600/boe_filesd
    tcp        0      0 *:16527                     :                         LISTEN      13022/boe_jobsd
    tcp        0      0 *:16592                     :                         LISTEN      21574/boe_jobsd
    tcp        0      0 *:16593                     :                         LISTEN      21582/boe_jobsd
    tcp        0      0 *:16533                     :                         LISTEN      13057/boe_fccached
    tcp        0      0 *:16534                     :                         LISTEN      13018/boe_jobsd
    tcp        0      0 *:16535                     :                         LISTEN      13065/boe_fcprocd
    tcp        0      0 *:16536                     :                         LISTEN      13028/boe_jobsd
    tcp        0      0 *:16537                     :                         LISTEN      13054/boe_eventsd
    tcp        0      0 *:16538                     :                         LISTEN      13069/boe_filesd
    tcp        0      0 *:16541                     :                         LISTEN      13052/boe_filesd
    tcp        0      0 *:16542                     :                         LISTEN      13050/boe_jobsd
    tcp        0      0 *:16575                     :                         LISTEN      21326/boe_cmsd
    tcp        0      0 *:16543                     :                         LISTEN      13072/boe_jobsd
    I have two standalone servers configured on this machine (development box), and therefore two CMS configured to listen on port numbers 16575 and 16525. These are confirmed by the 12th and penultimate line. 
    Question: Why are another two CMSs also appearing on ports 48300 and 46093 (lines 10 and 11)?
    Secondly, I have registered the Desktop Intelligence servers to ports 16535 and 16585 (as shown in lines 5 and 19). They are spawning
    child processes on ports 1025 and 1026.
    Question: Can I fix the spawned child ports to a fixed range instead of them being selected randomly?

    I solved the CMS problem - I hadn't changed the CMS request ports. D'OH! Below are the command lines for the two child processes. Is there any documentation around port number controls?
    prismapp 15772 13065  0 11:38 pts/9    00:00:02 /opt/app/mi/mi-bo-dev-env1/bobje/enterprise120//linux_x86/boe_fcprocd -loggingPath /opt/app/mi/mi-bo-dev-env1/bobje/logging/ -documentType CrystalEnterprise.FullClient -maxDesktops 0 -allowSilentRefresh false -fg -restart -name bo_dev_env1_sia.DesktopIntelligenceProcessingServer -pidfile /opt/app/mi/mi-bo-dev-env1/bobje/serverpids/bo_dev_env1_sia_bo_dev_env1_sia.DesktopIntelligenceProcessingServer.pid -ns lonrs00845:16525 -psChildName bo_dev_env1_sia.DesktopIntelligenceProcessingServer_child_1 -psdir /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/child_1 -pscommondir /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/common -orphanTimeout 33 -lib procFC -requestPort 1026 -initFileName /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/child_1/330955ddcecd741 -psChild
    prismapp 22856 21612  0 11:41 pts/9    00:00:01 /opt/app/mi/mi-bo-dev-env2/bobje/enterprise120//linux_x86/boe_fcprocd -loggingPath /opt/app/mi/mi-bo-dev-env2/bobje/logging/ -documentType CrystalEnterprise.FullClient -maxDesktops 0 -allowSilentRefresh false -fg -restart -name bo_dev_env2_sia.DesktopIntelligenceProcessingServer -pidfile /opt/app/mi/mi-bo-dev-env2/bobje/serverpids/bo_dev_env2_sia_bo_dev_env2_sia.DesktopIntelligenceProcessingServer.pid -ns lonrs00845:16575 -psChildName bo_dev_env2_sia.DesktopIntelligenceProcessingServer_child_1 -psdir /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/child_1 -pscommondir /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/common -orphanTimeout 33 -lib procFC -requestPort 1025 -initFileName /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/child_1/546c55ddd11e181 -psChild

  • Why can I only see iCloud email from the last 4 months? Where have all my old emails gone?

    I was trying to track down an old email from November last year and having used the search tool with no luck resorted to scrolling through the weeks. I then discovered to my horror that I didn't have any emails beyond 1/12/13 !!
    I have subsequently checked online using iCloud and the results are the same. Where have all my emails gone? I have been a MobileMe member since it started and pay for increased storage - which I am no where near utilising - how can I retrieve the 'missing' old emails? I have many Apple devices and it appears they are mssing on them all....

    You might want to go to icloud.com and open your calendar, then click the gear icon and choose Preferences, then make sure you aren't hiding old events on the Advanced tab.

  • Can someone explain the OCI cocncept to me, what it does and how to use it?

    Bit a newbie question, but whta does the OCI do, and how does it work.Start from the base.
    Peter

    http://www.orafaq.com/faqoci.htm
    "The Oracle Call Interface (OCI) is a set of low-level APIs (Application Programming Interface Calls) used to interact with Oracle databases. It allows one to use operations like logon, execute, parse, fetch, etc. OCI programs are normally written in C or C++, although they can be written in almost any programing language."

Maybe you are looking for