Can someone explain this !!

Really it's amazing !
When I bought my E71 about 4 months ths ago ,and as I was upgrading from S40 series ,I found it a little bit slow , of couse compared to other N series like N73 it was much faster.
For some issues , I decided to hard reset the device ,When I did that , it got about twice the speed compared to the speed at the time of purchase !!
I said might be the programs , I started to install them one by one from my backup ,still the phone is much faster opening menus....etc compared to the time of purchase !!
I said might be other programs , and I took a brand new phone where I found the formatting removed some programs that were installed at phone memory like mmssync ,Nokia webservice support ,Nokia internet service support package 1 ...etc
I did that till I made sure from the file manager that my phone's programs are exactly the same as the brand new phone!
then I compared my phone , and a brand new phone taken from a friend's shop ,still my phone after formatting is much faster !!!
What can be the reason behind that ,really I am about to start telling all my friends to backup and hard reset to get the maximum speed , but will it work with everybody? ,I can't tell as I can't explain the phenomena at the first place... can anybody help ?

Well, I have two E71s and I don't see this - one is still on the original firmware version and the other has been upgraded to the current version.
Now assuming that there is a difference between the firmware versions/programs installed, I would make a wild guess that in your original firmware, the factory installed format was sub-optimal. When you reflashed it, and reinstalled, you're probably seeing the effects of a better setup. But twice as fast is a little hard to believe.
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

Similar Messages

Multithreading - Can someone explain this ...

Hi Java Gurus:
Can someone explain this to me why my multithreading worked in once case and not in the other.
First a little background:
My application lets the user create multiple JInternalFrames. Each frame has an OK button. When the user presses the OK button, the frame goes about it's business in a new thread, thus returning control to the use, so he/she can press the OK button on the second frame .. and so on.
Following is the event handler for the OK button that creates the new thread:
case1 - doesn't work:
      btnTranslate.addActionListener(
         new ActionListener() {
            public void actionPerformed( ActionEvent e ) {
                         txtOutput.setText("");
                         txtBadParts.setText("");
               Translation trans = new Translation(inst);
               trans.run();
      );case2 - works:
      btnTranslate.addActionListener(
         new ActionListener() {
            public void actionPerformed( ActionEvent e ) {
                         txtOutput.setText("");
                         txtBadParts.setText("");
                   new Translation(inst).start();
      );Thanks,
Kamran

Calling the run method makes the run method run in the current thread. You need to call the start method to get the thread to start its own thread.

Trying to understand RSTP - Please can someone explain this?

Hi Group
I am still confused about how RSTP is implemented. From what i understand the major difference is that STP
used Timers for Loop prevention whereas RSTP coordinates between neighbors via messages (proposal/aggreement) to turn on links
more quickly after topology changes and is "timer free".
However, I have not noticed any difference in the configuration from the legacy STP
configurations and the RSTP configuration on cisco devices. Or are there any differences??
I have read in documentation that RSTP natively includes features like UplinkFast, BackboneFast and PortFast. So are these features now obsolete
and not needed to be configured if you are running RSTP. (Although i have seen Portfast still configured along with RSTP on many switches)
Also can someone explain the below Points from Cisco Documentation
1) should STP be disabled on edge ports all together as suggested below?
"STP edge ports are bridge ports that do not need STP enabled, where loop protection is not needed out
of that port or an STP neighbor does not exist out of that port. For RSTP, it is important to disable STP
on edge ports, which are typically front-side Ethernet ports, using the command bridge
bridge-group-number spanning-disabled on the appropriate interface. If RSTP is not disabled on edge
ports, convergence times will be excessive for packets traversing those ports."
2) It seems RSTP relies on duplex setting to determine inter-switch links. What is the configuration to explicitly
configure RSTP link types? (I couldnt find this in the documentation)
"RSTP can only achieve rapid transition to the forwarding state on edge ports and on point-to-point links.
The link type is automatically derived from the duplex mode of a port. A port that operates in fullduplex
is assumed to be point-to-point, while a half-duplex port is considered as a shared port by
default. This automatic link type setting can be overridden by explicit configuration. In switched
networks today, most links operate in full-duplex mode and are treated as point-to-point links by RSTP.
This makes them candidates for rapid transition to the forwarding state."
Also i am a bit rough on my RSTP knowledge even after skimming a few Cisco documents. Can someone please explain this in simple way.
Thanks in advance

to configure it on a device:-
spanning-tree mode rapid-pvst
PortFast/UplinkFast & BackboneFast were cisco "Enhancements" to 802.1d STP. RSTP just incorperates them. If you want to configure portfast, the command is still "spanning-tree portfast"
OK
1) That is your choice - I have bitter experiance of users/IT admins just plugging hubs/switches in when ever they can. Also cabling the switch back to itself creating a cabled loop. So my advice to you is to leave STP enabled on all switch ports, BUT enable BPDUGuard - this is a life saver, if you have configured portfast.
2) duplex auto! or duplex full (overiding)
I really suggest that you read the 802.1d standard, once you understand normal spanning-tree - RSTP will come to you.
http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html
http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol
HTH>

Can someone explain this flashmo sample?

Hi,
I'm a newbie in flash and looking at this sample project.
http://www.flashmo.com/preview/flashmo_169_intro
I opened it with flash cs3, and can see actionscript on the actions layer, and can see symbols in the library. However, I cannot figure out what makes the symbols swoosh in/out in sequence. The actionscript on the actions layer does not have that, or so I figured.
Can someone explain where I need to look at?
Thanks.
Ben

This is another good reason for never using scenes in Flash designs--they put things where they cannot be easily found. There is no actionscript for the animations, but there is a second scene that contains all of the animation. If you open the secnes panel you will find a second scene that includes all of what you are wondering about.
Ooops, sorry Rob. ....bad timing.

CAN SOMEONE EXPLAIN THIS CODE

HI,
CAN SOMEONE EXPLAIN TO ME THIS CODE:
FUNCTION DISP_QATD return VARCHAR2 is
BEGIN
     SRW.REFERENCE(:P_CURRENCY_CODE);
     SRW.REFERENCE(:P_QATD1);
     SRW.USER_EXIT('FND FORMAT_CURRENCY
          CODE     = ":P_CURRENCY_CODE"
     DISPLAY_WIDTH     = "19"
          AMOUNT     = ":P_QATD1"
          DISPLAY     = ":DISP_QATD"
     PRECISION     = "STANDARD"');
     RETURN(:DISP_QATD);
END;

Hello,
For details about SRW.REFERENCE :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/plsql/builtins/srw/srw_reference.htm?tp=true
Regards

Can someone explain this difference in Mac vs Win policy ?

I can download a MathScript module for evaluation with the Windows evaluation version, but for the Mac, I have to first buy LabVIEW (the module is free, just can't be evaluated). Can someone explain the logic behind this nonsense ?

NI's activation platform doesn't work on the Mac or Linux operating systems. We created a "special" evaluation version of LabVIEW for the Mac, but after the 30 days, it requires you to uninstall it and install the regular version of LabVIEW, which doesn't have activation.
VISA is offered as a free download because it a device driver, and by practice, all of NI's device drivers are free. However, the MathScript RT Module is an add-on for LabVIEW. The reason that the Mac and Linux versions are free is because we don't have LabVIEW Real-Time for Mac or Linux, and the real-time capabilities for the LabVIEW MathScript RT Module are the primary reason for the cost of the Module in the first place. This ability to deploy custom .m files to embedded hardware, and run them deterministically, as well as the plug-in tools to do profiling and testing, is a huge differentiator for MathScript on the Windows platform. However, that functionality doesn't exist on the Mac or Linux platform.
The reason you can't download the Module is because we need to be able to track who the users are. Each new release of LabVIEW brings a new version of the MathScript RT Module, and we physically mail the new media to all of the users who have "purchased" the free Module, just like with any purchased Module. If we simply said go download it, then each person would have to go re-download it with each release.
"Go stuff yourself" is certainly not the intention. You will be able to use the Mac version of MathScript (free) on the evaluation version of LabVIEW for Mac. To find this version, navigate to http://www.ni.com/trylabview/ and choose to "See Download Options". The mac version is linked within this page.
I hope you find this information both helpful and satisfactory.
Jeffrey P.
LabVIEW Product Management
National Instruments

Can someone explain this behavior?? (session 0 with htp.init)

Hi,
I've noticed that when you access a page using the Session 0 and that page contains an "htp.init" in a before header process, for some reason the session expires and creates a new one.
I made an example on apex.oracle.com, but first let me explain what've done exactly.
There's two pages. On page 1, I have an item named :P1_COLOR that is assigned the value of an application item :P_RED. This application item is affected in an application process before header that runs only on page 1 (the value assigned is "This is red"). I also have an item that displays the session id using this code:
return :APP_SESSION;
Then, I have a link called "page 2" in the HTML region :
a href="f?p=&APP_ID.:2:&APP_SESSION.:::::">page 2</a
Also, more importantly, on page 1 I have a process before header that sets a cookie:
begin
htp.init;
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
name    => 'MY_COLOR_COOKIE_'||:P_RED,
value   => 'test_value',
expires => SYSDATE365,+
path    => null,
domain => null                );
owa_util.mime_header('text/html', TRUE);
END;
Now if you go in the application normally without session 0, you will see the "This is red" with the session id and when you click on page 2 you will still see "This is red" with the same session ID
http://apex.oracle.com/pls/otn/f?p=60310:1::::::
But when using the Session 0, you see "This is red" with a session id, but when you click page 2, you don't see "This is red" and a new session ID is created, but the link in the address bar still contains the session 0. Also, if you press BACK and then go on page 2 again, you don't lose the :P_RED value nor the session. There seems to be a problem only the first time around.
http://apex.oracle.com/pls/otn/f?p=60310:1:0:::::
Can anyone explain me this behavior? Is it a bug? What is the work around? Because, i know that if you want to set a cookie you need "htp.init".
Note: I 've commented the cookie part of my process and only left the htp.init uncommented and had the same result, that's why I'm saying it is caused by htp.init
Thanks, reginald
Edited by: reggieh on Mar 19, 2009 7:09 AM

Yes, you might need to do something like that. The zero SID cookie is set only once: the first time the application is visited with a zero for session ID. So for email links where you use zero in the link, you could make the link target page a dummy public page (999) with BRANCH_TO_PAGE_ACCEPT in the request and the actual page you want the user to go to in the portion of the request after the pipe symbol, e.g., for page 10, the url would look like:
http://host:port:/pls/DAD/f?p=60310:999:0:BRANCH_TO_PAGE_ACCEPT|10
An after-submit process on page 999 would use :REQUEST as the page to redirect to:
owa_util.redirect_url('f?p=' || :APP_ID || ':' || :REQUEST || ':' || '0');
apex_application.g_unrecoverable_error := true;
If this works the way we're thinking, the zero sid cookie will be sent when page 999 is requested, then page 999's after-submit process would take the user to the desiired page on which your process could set the tracking cookie.
Scott

Can someone explain this crazy query optimisation?

A software company has me trialling a product that has a query optimiser. I can't for the life of me explain what is going on below and would like some help from someone with a bit more SQL experience. I have a query I've been struggling to bring down the time on:
CREATE OR REPLACE VIEW PLATE_STATS_DATA_VIEW AS
SELECT P.Folder_ID, P.expt_or_control_ID, P.Plate_Type, P.Dose_Weight, P.Volume, P.Strain_Code, P.S9_Plus,
P.type_Name as Contents, P.Replicate_ID,
P.Number_Of_Plates, round(avg(P.count)) as mean_count,
min(P.count) as min_count, max(P.count) as max_count, count(P.count) as Plates_Counted
FROM expt_folder_plates P, History_Control_Log L
WHERE P.expt_or_control_ID = L.Control_ID
AND P.Strain_Code = L.Strain_Code
AND P.Plate_Type = L.Type_Code
AND P.S9_Plus = L.S9_Plus
AND L.control_Included > 0
GROUP BY P.Folder_ID, P.expt_or_control_ID, P.Plate_Type, P.Dose_Weight, P.Volume, P.Strain_Code,
P.S9_Plus, P.type_Name, P.Replicate_ID, P.Number_Of_PlatesIt took 20 seconds on my large test database, so I put it through the optimiser. It took it down to 0.1 seconds simply by changing 'WHERE P.expt_or_control_ID = L.Control_ID' to 'WHERE P.expt_or_control_ID = L.Control_ID + 0'.
I have no idea why this would make any difference - adding zero to a value?! Can anyone enlighten me?
Many thanks,
Gary
Message was edited by:
GaryKyle

Ahhh, thanks guys. I'm a bit of a beginner here. This is my first look at explain plans - just had to work out how to see them! I think I understand what is happening now - it looks like that with the index, it does the group by FIRST on all the data and this takes a large amount of time. Am I right?
Before +0:
SELECT STATEMENT, GOAL = ALL_ROWS               Cost=162787Cardinality=1380965Bytes=328669670
SORT GROUP BY               Cost=162787     Cardinality=1380965     Bytes=328669670
HASH JOIN               Cost=16773     Cardinality=1380965     Bytes=328669670
   TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=EXPT_FOLDER_DETAILS     Cost=29Cardinality=4038Bytes=387648
   HASH JOIN               Cost=16730     Cardinality=1380965     Bytes=196097030
    TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=AMES_PLATE_TYPES     Cost=2Cardinality=6Bytes=192
    HASH JOIN               Cost=16715     Cardinality=1380965     Bytes=151906150
     TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=HISTORY_CONTROL_LOG     Cost=2Cardinality=40Bytes=880
     HASH JOIN               Cost=16694     Cardinality=2002400     Bytes=176211200
      HASH JOIN               Cost=59     Cardinality=8076     Bytes=282660
       TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=EXPT_FOLDER_SOLVENTSCost=2Cardinality=3Bytes=51
       TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=CONTROLSCost=56Cardinality=8078Bytes=145404
      TABLE ACCESS FULL     Object owner=PI_AMES_BIGObject name=EXPT_FOLDER_PLATESCost=16584Cardinality=5499657Bytes=291481821After +0:
SELECT STATEMENT, GOAL = ALL_ROWS               Cost=1655     Cardinality=138     Bytes=45954
HASH JOIN               Cost=1655     Cardinality=138     Bytes=45954
HASH JOIN               Cost=1625     Cardinality=138     Bytes=33672
   HASH JOIN               Cost=1569     Cardinality=414     Bytes=96462
    MERGE JOIN CARTESIAN     Cost=4          Cardinality=18     Bytes=630
     TABLE ACCESS FULL          Object owner=PI_AMES_BIG     Object name=EXPT_FOLDER_SOLVENTSCost=2Cardinality=3Bytes=30
     BUFFER SORT          Cost=2     Cardinality=6     Bytes=150
      TABLE ACCESS FULL          Object owner=PI_AMES_BIG     Object name=AMES_PLATE_TYPESCost=1     Cardinality=6Bytes=150
    VIEW               Object owner=PI_AMES_BIG     Object name=TEST_PLATE_STATSCost=1564Cardinality=138Bytes=27324
     SORT GROUP BY               Cost=1564     Cardinality=138     Bytes=10350
      TABLE ACCESS BY INDEX ROWID     Object owner=PI_AMES_BIGObject name=EXPT_FOLDER_PLATESCost=39Cardinality=3Bytes=159
       NESTED LOOPS               Cost=1563     Cardinality=138     Bytes=10350
        TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=HISTORY_CONTROL_LOG     Cost=2Cardinality=40Bytes=880
        INDEX RANGE SCAN     Object owner=PI_AMES_BIG     Object name=EXPT_CONTROL_ID_INDEXCost=5Cardinality=248
   TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=CONTROLSCost=56     Cardinality=8078Bytes=88858
TABLE ACCESS FULL     Object owner=PI_AMES_BIG     Object name=EXPT_FOLDER_DETAILS     Cost=29     Cardinality=4038Bytes=359382Thanks again,
Gary
P.S. looks like the explain plan's made the post horribly wide again ;) sorry. I'll keep it this way though otherwise the plan is hard to read.

Can someone explain this kernel Panic text?

I have a Macbook Pro 15" Mid-2010
2.66 GHz Intel Core i7
4GB 1067 MHz DDR3
Intel HD Graphics 288 MB
Now running Yosemite v10.10.2
I just recently upgraded my OS to Yosemite. When I did this, I wiped my computer completely, installed the new OS, and then I moved my music, movie, and document files over with a copy/paste method from a backup Hard drive. I did not use a time machine backup to restore files. (I mention this, as the apple store people seemed to think that my personal software caused my issue.)
Ever since upgrading to Yosemite, my computer randomly restarts itself, and the displays the kernel panic message, saying that it has restarted due to a problem. I can't seem to pinpoint what is causing it to restart, it happens a random times, using different apps, I can open an app and it will restart, and then I can try the app again and nothing. . .
After taking it in to the apple store, they told me to go thru steps to reinstall Yosemite clean again. I did. . no change. . .
They ran diagnostics on the hardware and said they found nothing wrong. They still think it is software. The remaining option they gave me was to pay $300 to send it to a more intensive testing facility and they would replace any faulty parts they find.
I would prefer to have a definitive answer as to what is going on, so I am posting one of the kernel reports below in hopes that someone could guide me to know if I should pay to have the hardware checked, or if that is just dumping my money and there is an easier issue i can fix. The apple store people didn't even care to look at the report. So either they can't read it, or they didn't want to tell me what it means.
Thanks in advance for any insight you can offer me.
Anonymous UUID:       225716D7-F232-A5CC-BDDC-048BAB92BCDB
Mon Feb 2 15:40:38 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff7f833c2f63): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80a8666000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.8.6/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80979530f0 : 0xffffff800072fe41
0xffffff8097953170 : 0xffffff7f833c2f63
0xffffff8097953250 : 0xffffff7f812c2b9f
0xffffff8097953310 : 0xffffff7f8138c18e
0xffffff8097953350 : 0xffffff7f8138c1fe
0xffffff80979533c0 : 0xffffff7f8160b056
0xffffff80979534f0 : 0xffffff7f813af82d
0xffffff8097953510 : 0xffffff7f812c95f1
0xffffff80979535c0 : 0xffffff7f812c70fc
0xffffff80979537c0 : 0xffffff7f812c807a
0xffffff80979538a0 : 0xffffff7f82966446
0xffffff80979538e0 : 0xffffff7f82975dff
0xffffff8097953900 : 0xffffff7f829a4493
0xffffff8097953930 : 0xffffff7f829a44ed
0xffffff8097953970 : 0xffffff7f8297ba1f
0xffffff80979539c0 : 0xffffff7f82946027
0xffffff8097953a60 : 0xffffff7f82941da1
0xffffff8097953a90 : 0xffffff7f8293f873
0xffffff8097953ad0 : 0xffffff8000cff00c
0xffffff8097953b60 : 0xffffff8000d01163
0xffffff8097953bc0 : 0xffffff8000cfe9c3
0xffffff8097953d00 : 0xffffff80007e4a87
0xffffff8097953e10 : 0xffffff8000733f8c
0xffffff8097953e40 : 0xffffff8000718a93
0xffffff8097953e90 : 0xffffff80007293bd
0xffffff8097953f10 : 0xffffff80008059fa
0xffffff8097953fb0 : 0xffffff8000836ea6
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f81272000->0xffffff7f814dbfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f80f24000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[E5A48E71-70F5-3B01-81D3-C2B037BBE80A]@0xff ffff7f81262000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f8121b000
         com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f814e6000->0xffffff7f8178ffff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f81272000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f80f24000
         com.apple.GeForceTesla(10.0)[3EA67900-B4A9-30BB-964D-0904DA5421CC]@0xffffff7f82 923000->0xffffff7f829f0fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f80f24000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[E5A48E71-70F5-3B01-81D3-C2B037BBE80A]@0xff ffff7f81262000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f8121b000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f81272000
         com.apple.driver.AppleMuxControl(3.8.6)[BE610379-FAEA-3E8F-B6AF-F92B70B3C5CD]@0 xffffff7f833b4000->0xffffff7f833c7fff
            dependency: com.apple.driver.AppleGraphicsControl(3.8.6)[76B001B1-30F1-3D72-B264-85D77B254C 2F]@0xffffff7f833ac000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f811a9000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[56AD16B5-4F29-3F74-93E7-D492B3966DE2]@0xffffff 7f80f24000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[619F6C9F-0461-3BA1-A75F-53BB0F87ACD3]@0 xffffff7f8121b000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[42706EB3-1447-3931-A668-FBAC58AAAA 7A]@0xffffff7f833af000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide:     0x0000000000400000
Kernel text base: 0xffffff8000600000
__HIB text base: 0xffffff8000500000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 274679477799
last loaded kext at 37738688547: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f82c1c000, size 32768)
last unloaded kext at 156755803356: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f81b15000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.15.5
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 269.25
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.8.6
com.apple.GeForceTesla 10.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBCardReader 3.5.1
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOSurface 97
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.8.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471.10.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: USB Receiver
USB Device: Built-in iSight
USB Device: IR Receiver

You have the MacBookPro6,2—the Edsel of Macs. It may have the logic-board defect that was covered by a recall program that has now ended.
Residents of the EU may be entitled to warranty service for up to six years after purchase.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue that Apple calls "VST" (for "Video Switching Test.") Ask for it. A "Failed" result means that the fault is present.
You may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
Sometimes the replacement part is also defective, so be prepared for that possibility. If you decide to pay for a new logic board, test thoroughly during the 90-day warranty period on the repair. Some owners have reported that they went through as many as three replacement boards before getting one that worked.
If you don't want to pay for the repair, you may (or may not) be able to work around the problem by disabling automatic graphics switching. To use the discrete graphics processor, you'll need a third-party utility to switch to it manually.
Often the problems start after an OS upgrade. If the upgrade was recent, and you have backups, then you can revert to a previous OS X version.

Can someone explain this chart about Li-ion charge cycles to me

I consider myself a pretty smart guy, but i couldn't figure this out. I'm thinking that apple just provided this graph without any real explanation of what it means. I'm talking about the one on .. http://www.apple.com/batteries/ that has a caption starting with "Charge Cycle." They provide a general explanation of cycles below, but don't seem to address the same thing the illustration they provided does. What does the 40% 20% 30% 20% 50% 60% mean? Why is "1 Cycle" in the middle and what is the difference between cycle 0-1 and 1-2. basically that illustration makes no sense to me and i'd love for someone to explain it

That charge is telling you how the charger charges the battery. The voltage charge is the green line and the amperage is the orange line. Voltage goes up to its full extent in the first couple of hours. The amperage starts at full charge strength and goes down as the batery charges so it will not overheat the battery. The most important thing to know about charging a Li (Lithium-ion) battery is that it has two different charge times, quick and full. most Li batteries get about an 80% charge at the quick charge time and 100% charge at the full charge time. when you first charge any rechargable battery make sure you do a full charge and then a full discharge with another full charge afterward. If you do not do this the life of the batery will be significantly diminished.
I hope this information helps. If you want more information in this subject ask a more direct question.

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can someone explain this to me ,thank you

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can anyone help me with this problem? thank you

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Can someone explain this to me (connect by level help)

I have this join:
select count(*)
from vchr_line v, vchr_dist t
where
t.VOUCHER_ID = v.VOUCHER_ID and
t.VOUCHER_LINE_NUM = v.VOUCHER_LINE_NUM
connect by level <= 10
When I run this select and there's one row in the vchr_line table that joins with one row in the vchr_dist table the count is 10.
If there are two rows in the vchr_dist table that join with one row in the vchr_line table the count is 2046.
Why is that?

I'm really not that good at defining geometric
progressions, writing summation formulas, etc. I
just picked 2 formulas that worked, whether I not
they accurately described the verbage I wrote, I
can't say. so,
1) I'll assume that your equation is better thanHere some examples ( in case of 2 starting rows, your initial formula and mine are the same)
SQL> WITH t AS (SELECT ROWNUM ID FROM tabs WHERE ROWNUM <=3)
2 SELECT COUNT(*), (power(3,6) -3)/(3-1) formula
3 FROM t
4 CONNECT BY LEVEL <=5
5 /
COUNT(*)    FORMULA
       363        363
SQL>
SQL> WITH t AS (SELECT ROWNUM ID FROM tabs WHERE ROWNUM <=5)
2 SELECT COUNT(*), (power(5,9) -5)/(5-1) formula
3 FROM t
4 CONNECT BY LEVEL <=8
5 /
COUNT(*)    FORMULA
    488280     488280
mine. although I honestly thought the sigma thing
was close ;-)The sigma thing is precisely correct, here i can only second you ;-)
2) allowing joins in connect bys is a bad thingNot necessarily, it depends only on number of rows in the result of join and how many starting points could be. In this example join doesn't do any harm:
SQL> SELECT COUNT(*)
2 FROM emp e,dept d
3 WHERE e.deptno=d.deptno
4 CONNECT BY PRIOR empno=mgr
5 START WITH mgr IS NULL
6 /
COUNT(*)
        14Best regards
Maxim

Can someone explain this for me

I seem to have a lot of this:
Oa5be5e7f662a83c57d57ef0021le95p66fb3ba41.xml Then under kind is XML.TXT
When I go to open this it opens in "Open Office" and then is a bunch of jibberish.
1. can I get rid of it?
2. How can I take Open Office off this computer.
Thanks

Hi Marty
Kernal panics are usually attributed to hardware problems.
If you are under Applecare take it in.
If you are not, you may glean some information from these links.
What is a Kernel panic?
Resolving Kernel Panic's by Dr Smoke
I hope things work out.
regards roam

I forgot my icloud password but when I go to verify my birthdate in order to answer my security questions, it says "For your security, please provide a longer answer." can someone explain this to me? Seriously how can I provide a longer answer?

I forgot my icloud password. I attemptted to reset it by going to my security questions and answering them but when I go to verify my birthday, it says
Please verify your birth date to continue.
                     Month                     January                     February                     March                     April                      May                      June                     July                     August                     September                     October                     November                     December                                      Day                     1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31                                          Year                         2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960
1959
1958
1957
1956
1955
1954
1953
1952
1951
1950
1949
1948
1947
1946
1945
1944
1943
1942
1941
1940
1939
1938
1937
1936
1935
1934
1933
1932
1931
1930
1929
1928
1927
1926
1925
1924
1923
1922
1921
1920
1919
1918
1917
1916
1915
1914
1913
1912
1911
1910
1909
1908
1907
1906
1905
1904
1903
1902
1901
1900
1899
1898
1897
1896
1895
1894
1893
1892
1891
1890
1889
1888
1887
1886
1885
1884
1883
1882
1881
1880
1879
1878
1877
1876
1875
1874
1873
1872
1871
1870
1869
1868
1867
1866
1865
1864                     For your security, please provide a longer answer.
Seriously how am I suppose to provide a longer answer?

If you are having problems using the website to reset your password, you can call AppleCare support. They can assist you with AppleID issues, and I believe there will be no charge for that.
AppleCare phone number: (800)-694-7466

TS1424 can someone explain this to me?

there was a problem downloading you make me feel cobra star ship. file seems to be corrupted, please redownload it from check downloads, error 100,000

seems to be corrupted, please redownload it from check downloads, error 100,000
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Can someone explain this !!

Similar Messages

Maybe you are looking for