Can someone explain to me what the Terminal does?

Can someone explain to me what the Terminal application does? A good explanation would be greatly appreciated, thanks!
NA

Can someone explain to me what the Terminal
application does? A good explanation would be greatly
appreciated, thanks!
Sure, go here:
http://www.macdevcenter.com/pub/a/mac/2001/12/14/terminal_one.html
Powermac G5 - Macbook C2D Mac OS X (10.4.8) Both macs are heavily upgraded and used frequently.

Similar Messages

Can someone explain to me what the "loose hinge" issue is all about?

my gf just bought a new MB and have had the pleasure of playing around on it for a little while. love it and it practically out performs my late 2007 MBP! the only con imo is the glass in front of the screen, but it's not my computer!
i read on here about people claiming there is a loose hinge issue? i know if i close the lid to a certain point it shuts itself (maybe about 1/4 - 1/2 inch gap before the lid is fully closed), but i'm pretty positive that it's really just the magnets for keeping the lid closed.
i mean, is it simply an issue of the magnets being a little stronger than what people are expecting or is the lid shutting on its own with a gap of several inches?
anyways, the hinge on her MB seems perfectly fine.

The Lightnng cable hasactive components and are not just wire
Lightning cable's authentication chip found to offer "just enough" security
Thus it appears that Apple is still having difficulty making cable that last.
- Make an appointment at the Genius Bar of an Apple store. Bring the cable too
Apple Retail Store - Genius Bar
I have not has any problem with the Lighning cables that came with my iPad 4 and my 7G iPod Nano

Can someone explain to me what the history state slider does?

Hi everyone!
Why use the slider when I can easily click a previous state from the list in the history panel?
Does the slider have some extra function that I may have overlooked?
Thanks for your help,
It's been bugging me for ages.
Kelly
(using Photoshop CS5.1)

I had to boot my old XP machine to fire up CS5 and remind myself of this feature. It's called the Active State Marker and merely shows the currently active history state. Some documentation indicates you move this slider to another history state to make it active. By why bother; just click a history state to make it active. This slider is no longer available in CS6 or CC because -- as you indicate -- it doesn't do anything useful.

Can someone please tell me what the name "radio" over a telephone contact means.

Can someone please tell me what the name "radio" stands for over a telephone contact.

"Radio" seems to be the default label if you're using an Exchange account. Just go into the contact, tap "Edit" in the upper right. Tap the word "radio" and select the label you'd prefer to use.

Can someone explain me well when the infopackage use batch or dialog?

Hi Gurus,
can someone explain me well when the infopackage use batch or dialog?

Hi ,
first of of in Bi_btch job nothin comes in the log .. but if you use PSa and then into data target then it willl definatly create background jobs .. but i feel it doesnt relate to the concept you are taking about ..
if you us e a sepeate update from PSA step the it will create backgroung jobs ..of king bi_btch and if you push the packets maually then it will create jobs like bi_book .. thats the diff ..
The initialization and execution of an InfoPackage is implemented as a process type in the process chain maintenance. The Start Later in Batch setting is hidden if the InfoPackage is used in a process chain. This is because the start of the request is determined by the process chain itself.
If you do not use the InfoPackage in the process chain maintenance and you want to process the data request in the background, select the radio button Start Later in Batch and define the required start time. If start times already exist for this data request, this is indicated with a next to the Scheduling Options pushbutton. You can change the start time using Settings Options. You can also enter an end date for the data request with a background job.
If you schedule an InfoPackage in the batch later, the background request job runs until all data is updated in BW. This is displayed with a corresponding indicator in the Schedule tab page. The load process remains active until the data is updated.
For example, this gives external scheduling tools the option of monitoring the request job. The job then also runs with a request from an SAP source system as long as the source system has sent the data to the BW system and posted it or until the monitor sets the request to red. In the job log, a success or error message is displayed according to whether the request was posted successfully or not.
regards,
shikha

Can someone give a explan what the System Performance indicators mean?

Can someone give a explan what the System Performance indicators mean?
Audio & Disk I/O
Thank you,
Scott
G5 Dual 2.0 - 2.5 Gigs Ram Mac OS X (10.3.9)

Hi Scott!
Audio is your CPU activity, and Disk i/o is the amount of bandwidth you're using when streaming files from the hard drive (audio files and sample streaming).

Can someone help me understand what the measurement em stands for?

I have been running into the measurement em (or is it en) and I cannot find an explanation as to what it means. Can someone explain it to me with an example or two?
Thank you
Allen Macfalda

Murray *ACP* wrote:
It's a relative font metric. 1em means use the browser's default size, while .5em means use half the browser's default size. The default size is usually 16px, unless changed by some other CSS on the site.
Hi
To add to whar Murray has written, the relative font metric actually comes from the size of the letter 'm'. This means that if you have a width of 20em it will be 20 times the width of the letter 'm' in your chosen font not the browsers default font, (thats the theory). Some older browsers may use the browsers default font, (NN4, I did say old!) or even a few current mobile browsers.
It is also possible, (in a few modern browsers) to use en or ex for the mesurement, and these are based on the letter 'n' and 'x' respectively.
PZ

Can someone explain to me what an apple time capsule 2tb is?

so i have the new Xinfinity wireless router and i needed a 2tb hard drive and i don't want it to be wired to my mac, i want it to be wireless.
so can someone please explain to me what it completely is, and is it useful for my needs?

i needed a 2tb hard drive
There is a 2 TB version of the Time Capsule....also a 3 TB verion if you need more storage space.
i don't want it to be wired to my mac, i want it to be wireless.
The Time Capsule would be wired to your Xfinity wireless router.
Your Macs could access the hard drive on the Time Capsule using the Xfinity wireless network.
is it useful for my needs?
Yes, if you want to back up the data on your Macs over your Xfinity wireless network.

Can someone explain to me, what I have to do too download music. too my iPod, everytime I hook it up to iTunes it says . " Apple Mobile Device, Service is not started. "

iTunes say's everytime I hook up my iPod, " Apple Mobile Services, have not started" can someone help me and tell me what to do

Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

My ipod classic is not showing in devices anymore. Can someone help me determine what the issue might be?

My ipod classic 30gb is not showing as a recognized device in iTunes anymore. When I plug the device in, it shows a black backgroud with the apple logo and nothing happens. Can someone help me as to what the problem might be?
Thanks,
"keep calm and chive on"

Some phones can only send and recieve SMS messages. If the recipients phone doesn't support MMS they won't be able to recieve a text with a photo.
To get your photos in Photo Stream, you'll need to setup iCloud. Check out this Apple article for more info -> iCloud: Photo Stream FAQ

Can someone explain how to set the focus to a component

Hello,
What is the best way to ensure that a component gets the focus with code. I have tried requestFocus and requestFocusInWindow and none of them seems to do there work. The frame containing the components that should get the focus is displayed, the component is focusable so that is not the problem. What I found out is that if the component is deep in a nesting of panes (where the top pane is in the frame) is that calling requestFocus or requestFocusInWindow does not give the component where this focus is called on the focus but either the pane that contains it, one of the parent panes of this pane or one of the components in these panes, in almost all cases the component requesting the focus does not get the focus at all. I always have to write a work around in defining a focus listener for all these panes that transfer the focus back to the component that requested the focus originally, I can't believe that this is the way to ensure that a component has the focus via code. I have searched for documentation but found nothing on what requestFocus(inWindow) is actually dooing (a lot about focus traversibility but I don't want to control this, just make sure that a component gets the focus).
Again I'm pretty sure that the toplevel window is activated and that the component that requested the focus is focusable (I had created a derived version of the DefaultFocusManager that showed who has focus). Personally I think (and I'm not alone if you do a search in this forum on focus management) that there is either a big problem in the documentation of focus management or that it is still not possible to even try to set the focus on a component in a easy way.
Marc

Hello,
thanks for your reply, here is some example code that illustrates the problem I have (the actual code is to big to show here, which is the raison why I did not posted it here). The code wil create a frame with a JPanel with a JTextField, a 'New' Jbutton and a 'Delete' Jbutton, a tabbed pane in the center ('New' will create a new JPanel, add it to the tabbed pane and set the focus on it, either by calling RequestFocusInWindow() directly or by calling it via InvokeLater (someone on this forum suggested to use this). I changed also the focusmanager to show the component that has the focus when you type something. To test compile and run the program (either with a call to requesteFocusInWindow directly or indirectly (by changing the comments), on my system I get the following behaviour:
1. requestFocusInWindow called directly
Start program en type, the tabbed pane has the focus
Press New and type something, a button has the focus not the created panel
Press New again and type something, a button has the focus not the created panel
2. requestFocusInWindow be called indirectly
Start program and type, the tabbed pane has the focus
Press New and type, the created panel has the focus (I thought at one moment that I had found the solution there, but alas ...)
Press New again and type something, a button has again the focus.
Note that with my real program it is not always a button that will have the focus, sometimes it is a combobox or a TextField (I tried to get this with the example code (the JTextField) but did not succeed.
Hopes this clarify the problem a little bid, what I want is when the window is visible to set focus on newly created panes (or in the real program on the panel that is selected via the tabbed pane or via a key combination to shift the focus between the panels) but requestFocusInWindow seems to behave unpredicatable. I can't imagine that what I see is a bug so I must make some assumptions which are not valid but I don't see them, btw listening on the WindowListener is I think not the solution because the frame is already displayed when I want to set the focus and I do not use a modal dialog box.
The example code follows here
Marc
* Main.java
* Created on December 21, 2004, 8:58 AM
package testfocus;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
* @author marc
public class Main
static int counter;
/** Creates a new instance of Main */
public Main()
* @param args the command line arguments
public static void main(String[] args)
JFrame frm=new JFrame();
JPanel content=new JPanel();
frm.setContentPane(content);
final JTabbedPane paneContainer=new JTabbedPane();
JPanel bar=new JPanel();
JButton create=new JButton(new AbstractAction("New")
public void actionPerformed(ActionEvent ev)
counter++;
final JPanel pnl=new JPanel();
pnl.setName("test"+counter);
paneContainer.add(pnl);
pnl.setFocusable(true);
pnl.requestFocusInWindow();
/* Either use this or the previous line
SwingUtilities.invokeLater(new Runnable()
public void run()
pnl.requestFocusInWindow();
JButton delete=new JButton(new AbstractAction("Delete")
public void actionPerformed(ActionEvent ev)
int i=paneContainer.getComponentCount()-1;
if (i>=0)
paneContainer.remove(i);
JTextField dummy=new JTextField("Test");
bar.add(dummy);
bar.add(create);
bar.add(delete);
content.setLayout(new BorderLayout());
content.add(bar,BorderLayout.SOUTH);
content.add(paneContainer,BorderLayout.CENTER);
frm.setSize(300,400);
FocusManager.setCurrentManager(new DefaultFocusManager()
public void processKeyEvent(Component component,KeyEvent ev)
System.out.println("Focus owner"+getFocusOwner());
super.processKeyEvent(component,ev);
frm.setVisible(true);
}

I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
You will now see something like this, with two items on the left. The second one is your new drive.
Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

Can someone lay out exactly what the certificate for UM/Lync 2013 needs to be?

Ok, so I spent 480 minutes on my cell phone dealing with this same problem with MS a few weeks ago and they fixed it without telling me exactly what was wrong. I'm doing another Lync 2013 install and still can't get it to talk to UM.
I need to know the following:
Does the cert for the Exchange 2013 UM services need to be issued from the CA or do I use one of the existing Exchange certs?
What does the subject name need to be?
What needs to be included in the SANs?
After the cert is created, do any changes need to be made to the Lync server, or is the cert simply assigned to the UM roles via Exchange Admin Center, restart UM services, and it works?

You can issue the cert from an internal CA or use a self signed cert as long as it's trusted by Lync.
The subject name should be the server's FQDN.
Nothing else really needs to be a SAN unless you're assigning this cert to a service outside of UM, for example if you needed it to also have a webmail.domain.com or autodiscover.domain.com for the CAS role.
Your best bet is to just let the Exchange certificate wizard create it for you, and nothing really needs to change on the Lync server side, but when you bring the services up you might want to do it during off hours. I've seen an issue where for the
UM server takes a moment longer to get up to speed and rejects calls sent at it for 15 or so minutes. But, it should just work.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Can someone explain to me what are the benefits of compound path when it comes to text? I can understand one or two lines but a whole paragraph?

Every year we do a fundraiser to help my job, but my co-worker is getting frustrated. We receive outside files laid out in Illustrator, but the person who does the file sets all of the text using compound path. These aren't one or two lines of text to be manipulated but whole paragraphs of text. This person does this every year, and it is time consuming if my co-worker can't manipulate a paragraph without going to each individual layer that has a letter. Is there a way to make these compound paths merge as one without altering the document i.e. make some element disappear. Any kind of help is appreciated.

ikaika,
As I (mis)understand it, you should simply ask this outside person to keep all text as Live Type, using a font that you have on your machines (in the exact same version) so there will be no font substitution issue(s).
That way, you could get the job done without silly waste of time.
Failing to comply would seem quite uncooperative.
I presume there is no copyright question onvolved in this.

XFL - can someone explain CUBICS attribut in the EDGE tag?

As there is no XFL documentation, I would like to ask if someone knows what's the CUBICS attribut in EDGE tag used for. I have a script which creates new shapes in XFL, but I don't know how to deal with the cubics part. I don't create it, but than I notice that there are issues when I try to edit shape whithout the cubics info in the IDE (like adding new point). The solution is to touch the shape a little bit, save and reload the source which creates the CUBICS records, but anyway, I would like to understand it a little bit.
Here is a simple example how cubics looks like:
<edges>
      <Edge fillStyle0="1" edges="!3786.5 0.5S1|0 0.5!0 0.5|0 3542.5!0 3542.5|3786.5 3542.5!3786.5 3542.5|3786.5 0.5"/>
      <Edge cubics="!3787 3543(;3787,3543 3787,1 3787,1q3787 3543 3787 1);"/>
      <Edge cubics="!0 1(;0,1 0,3543 0,3543q0 1 0 3543);"/>
      <Edge cubics="!3787 1(;3787,1 0,1 0,1q3787 1 0 1);"/>
      <Edge cubics="!0 3543(;0,3543 3787,3543 3787,3543q0 3543 3787 3543);"/>
</edges>

    Upgrading is always exciting, gbright! You can save up to $25 per line when upgrading with Edge. This does require you upgrading your device and accepting an Edge agreement. You will still qualify for your monthly employee discount off the More Everything access charges as long as the plan is $34.99 or higher. Each line has its own contract/edge agreement. You do not need to wait for the 4th line to be eligible to take advantage of Edge or the discounts. If you are eligible for the standard Edge, you do not need to trade in your current devices. You only trade in the devices when it is early edge. I can provide you more details in a private message.
I just sent you a follow request. Please follow back and send me this information in a private message.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Can someone explain to me what the Terminal does?

Similar Messages

Maybe you are looking for