Can someone explain what these 5 connections refer to?

Especially, what's the difference between the first three.

the first two are probably connections to the home network. the first one should provide DHCP to the home network. default gateway is 192.168.1.1 and then whatever the computers are. the broadband connection is for the external network so that the router can communicate with the outside world. the third one wireless provides connectivity wireless to the home. I am not sure if people are still using PPoE. ppoe is kinda old now. Verizon does not use it anymore.

Similar Messages

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Can someone explain what Activity Monitor's 'Spindump' does?

Can someone explain what Activity Monitor's 'Spindump' does?

http://bit.ly/1b68kUF get me to:
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/spindump.8.html

HT5463 In my opinion, when the Silence setting is "only when the device is locked", it contradicts the settings you set above, like Manual. Can someone explain how these settings work together?

Can someone explain how these settings work together? Manual seams to contraduct the SILENCE setting at the bottom of the Do Not Disturb page. It's very confusing.

You should have seen information in the support document that you linked from. It used to be with the first version of Do Not Disturb that it would only function when the device was locked. That changed with iOS 7, and not it can be active all of the time. With it on Manual, it is on, but if you have the device "awake" that you can still receive calls/texts, etc. Sort of like you have the phone awake, so it isn't a problem for you to receive things. If you set the settings for Always, this means you can be doing things on the phone and not be disturbed by anything else. Does that make sense?

Can someone explain what DHCP is and how I do I connect to WiFi hotspot?

Can someone explain how a wireless network/router with an internet connection allows computers with a wireless card to connect to the internet? For instance, In an internet cafe with WiFi, how does my macbook get the IP address for the ISP that the cafe uses to allow me to open a webpage with Safari? What is DHCP and how should I set my internet preferences to allow me to use a network other than my own.
The reason I ask so many questions is that I can connect to the internet with my Airport Express base station network at home but not in my local WiFi cafe. Can see the network but not connect.

Most Internet Cafes utilize DHCP to dynamically provide a wireless client with an IP address for that session. DHCP is a protocol used by networked computers (clients) to obtain IP addresses and other parameters such as the default gateway, subnet mask, and IP addresses of DNS servers from a DHCP server. It facilitates access to a network because these settings would otherwise have to be made manually for the client to participate in the network.
You Mac's AirPort, in turn, is set up to be a DHCP client by default. This allows your Mac to accept the dynamically provided IP address information from the Internet Cafe's DHCP server.
The reason I ask so many questions is that I can connect to the internet with my Airport Express base station network at home but not in my local WiFi cafe.
It sounds like the AirPort settings that your Mac is using is no longer at their default settings...and my be the reason you cannot connect to the Internet at the Cafe...or, the Cafe has additional settings required. I suggest that you check with the Administrator of the particular Internet Cafe you're having trouble connecting with to find out what settings are necessary to use their wireless network.
A typical AirPort is set up as follows:
System Preferences > Network > Show > Network Port Configurations
- Verify that AirPort is "On" (checked)
- Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
Systems Preferences > Network > Show > AirPort
AirPort tab
- By default, join: Automatic
TCP/IP tab
- Configure IPv4: Using DHCP
- Configure IPv6: Automatically or Off
Proxies tab
- Configure Proxies: Manually
- Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
- Exclude simple hostnames (unchecked)
- Bypass proxy settings for these Hosts & Domains: <leave blank>
- Use Passive FTP Mode (PASV) (checked)

A new iphone 5. I have been told to connect to pcfor an installation for the 1st time. can someone explain- WHAT EXCACTLY DO I HAVE DO?

I bought a new iphone5. In the store I have been told to cync the phone. the phone has apps, makes calls and connects to the internet. WHAT AM I MISSING?

When you turn on your iPhone for the first time, the Setup Assistant will walk you through entering account information or turning on certain features. If you skip setup, you can always go back and enter details or make changes by following the steps outlined in these articles:
Connecting to the Internet
Signing in with or creating a free Apple ID
Setting up iCloud
Turning on recommended features, such as Location Services and Find My iPhone
Activating iPhone with your carrier
During setup, you can copy your apps, settings, and content from another iPhone by restoring from an iCloud backup or from iTunes
From here > http://www.apple.com/support/iphone/essentials/

Updated to Yosemite recently, keep on getting efi and kernel panics. Can someone explain what this report means?

This is the crash report I just got. I am just doing random work and this happens. I would really appreciate it if someone could explain what this means. I have fixed my computer with DiskWarrior 3 times but this just keeps happening. I also have bootcamp and it's doing absolutely fine.
Anonymous UUID: CF401590-1A3C-749E-F045-F2498CA51C2F
Tue Nov 18 18:41:14 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff8025a1e80a): Kernel trap at 0xffffff8132a4b870, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8132a4b870, CR3: 0x00000001e40ab0d9, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0x0000000000000001, RCX: 0x000000002e4e5941, RDX: 0x0000000000000000
RSP: 0xffffff8132a4b598, RBP: 0x0000000000000000, RSI: 0x00000000563af16d, RDI: 0x0000000000000000
R8: 0xffffff8132a4b640, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000200
R12: 0x0000000025000000, R13: 0x0000000000000200, R14: 0xffffffef00000000, R15: 0x0000000000000011
RFL: 0x0000000000010296, RIP: 0xffffff8132a4b870, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8132a4b870, Error code: 0x0000000000000011, Fault CPU: 0x0 Kernel NX fault
Backtrace (CPU 0), Frame : Return Address
0xffffff8132a4b240 : 0xffffff802593a811
0xffffff8132a4b2c0 : 0xffffff8025a1e80a
0xffffff8132a4b480 : 0xffffff8025a3a443
0xffffff8132a4b4a0 : 0xffffff8132a4b870
BSD process name corresponding to current thread: savapi
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000025600000
Kernel text base: 0xffffff8025800000
__HIB text base: 0xffffff8025700000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 7026664466086
last loaded kext at 1837127380720: com.avira.kext.FileAccessControl 1.0.0d1 (addr 0xffffff7fa814c000, size 49152)
last unloaded kext at 383172730740: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa814c000, size 61440)
loaded kexts:
com.avira.kext.FileAccessControl 1.0.0d1
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.ntfs 3.12
com.apple.driver.AGPM 100.14.37
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMikeyDriver 266.5
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleBacklight 170.4.12
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 97
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, SMC 2.2f41
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: USB Receiver
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1

You have the MacBookPro6,2—the Edsel of Macs. It may have the logic-board defect that was covered by a recall program that has now ended.
Residents of the EU may be entitled to warranty service for up to six years after purchase.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue that Apple calls "VST" (for "Video Switching Test.") Ask for it. A "Failed" result means that the fault is present.
You may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
Sometimes the replacement part is also defective, so be prepared for that possibility. If you decide to pay for a new logic board, test thoroughly during the 90-day warranty period on the repair. Some owners have reported that they went through as many as three replacement boards before getting one that worked.
If you don't want to pay for the repair, you may (or may not) be able to work around the problem by disabling automatic graphics switching. To use the discrete graphics processor, you'll need a third-party utility to switch to it manually.
Often the problems start after an OS upgrade. If the upgrade was recent, and you have backups, then you can revert to a previous OS X version.

Streaming, can someone explain what I am doing wrong?

I have two ATVs both synced to one computer. I have a large music library on a second computer but can't find how to stream to one of the ATVs.
I followed the instructions in the booklet, opened iTunes on the relevant computer, chose sources on the ATV, "Connect to New iTunes" and noted the passcode, selected the ATV icon and "Click to set up", entered the passcode and the ATV icon disappeared. "My Library" shows in the sources but the ATV icon only re-appears on the computer if I switch to "Connect to New iTunes". If I then click on the icon the ATV page opens up with details of the ATV and a message saying that the ATV icon will only appear when "My Library" is selected on the ATV, but as soon as I do that the ATV icon disappears. The help file says in System Preferences sharing pane make sure "iTunes Music Sharing" is on! There is no "iTunes Music Sharing"!!
Please, can someone take this idiot through the process step by step, including how you start streaming once you have successfully made the connection?

Glad to see everything is starting to work out.
You might consider two user accounts (that's logins) with a music library in each. It's a little more work to operate, but probably less than having two libraries in one user account and providing both users are logged in and have itunes running you should get both libraries available to you at the same time on the tv (obviously you would need to switch between them on the tv).
Otherwise I'd consolidate them by opening itunes (with library 1) and then dragging and dropping the music files from the music folder of library 2 onto itunes, I'd start by doing a few tunes to satisfy yourself that all is OK, you can probably do them in large chunks but I'd probably not drag them all at once, if something did go wrong you probably wouldn't lose any files but it might be difficult to figure out what files had been added and which hadn't before the problem occurred.

Can someone explain what exactly is involved when it comes to Time Machine snapshots?

Can someone give me a brief and succint description and tutorial on how Time Machine snapshots work?
I use Time Machine (on Mac OS X obviously, ML 10.8.4) to backup my HD onto a separate external drive at least once a week.
However, like so many other users I'm online in a variety of places so most of the time (about 99%) my laptop isn't able to be connected to the external designated for HD backups and I've heard and read that the application Time Machine can use "snapshots" to create temporary backups to hold until you've connected your external the next time.
I wonder how that works?
How do I go about setting up this snapshot option so that my laptop can be regularly backing up my files without me having to be tethered to the external at the same time?
Won't that fill up my entire drive due to virtual memory or sleepimage or swapfiles or something along those lines?
And last but certainly not least, how can the user take use of this option but also prevent the TM snapshots from hogging every availabe byte of memory.

Read > http://pondini.org/TM/30.html
CS7981 wrote:
However, like so many other users I'm online in a variety of places so most of the time (about 99%) my laptop isn't able to be connected to the external designated for HD backups and I've heard and read that the application Time Machine can use "snapshots" to create temporary backups to hold until you've connected your external the next time.
I wonder how that works?
That's how it works.
CS7981 wrote:
How do I go about setting up this snapshot option so that my laptop can be regularly backing up my files without me having to be tethered to the external at the same time?
Local snapshots are made automatically in portable Macs with OS X Lion or Mountain Lion. Simply disconnect the Time Machine drive from your Mac and your Mac will start making local snapshots.
CS7981 wrote:
Won't that fill up my entire drive due to virtual memory or sleepimage or swapfiles or something along those lines?
These snapshots are stored in the hard drive and they consume a lot of space, as they are backing up the whole hard drive. A lot of users complain about the space they take, but in general, you don't have to worry. See below.
CS7981 wrote:
And last but certainly not least, how can the user take use of this option but also prevent the TM snapshots from hogging every availabe byte of memory.
Local snpashots will be deleted automatically when the hard drive is full, so don't worry about it. If you want to remove them, simply open System Preferences > Time Machine, and turn it off. Leave it for some minutes or hours, and turn on Time Machine again, but there's no reason to do that

Bluetooth: can someone explain what you can do with it?

On the iPhone, is bluetooth only for pairing with a BT headset? no data transferring/receiving whatsoever with a powerbook? if so, has Apple gone mad?
thanks

It is easier to explain what it cannot do.
• it does not support OBEX file exchanges
• it does not support DUN connections via Bluetooth to connect your computer through it to the internet
• it does not synchronize contact, events or media files
Support for synchronization and file transfer it available only via USB through iTunes 7.3 or later.

Can someone explain what Automater is to me, in simple terms?

Hi, anyone out there wanna explain what Automater is for what it does etc.
Thanks in advance
Tracy

Hi Tracy
Launch Automator and select "Help Viewer Help?" from the Help Menu. One of the things you'll see listed there is:
*+Discover Automator+*
+Create time-saving automations without programming a single line of code.+
I'm currently on a mac running 10.4 but I can't see it being that different for 10.5? If you click on the link you get this explanation:
+Automator is an innovative personal automation assistant that makes it easy to automate repetitive tasks. Automator lets you skip the complex programming and scripting that is normally required to create automations. Individual steps called actions can be assembled into a complete task by dragging actions into an Automator workflow. You can run your completed workflows repeatedly, and even share them with others.+
If you scroll down that help page there are more explanations and examples. Is that simple enough for you?
Tony

Can someone explain what "gfx-surface-win32" is in about:memory?

I have an extension that causes "gfx-surface-win32" in about:memory to use excessive amounts of memory. I have tried to contact the developer of the extension without any success. I was going to try and see if I could fix it but I can figure out what "gfx-surface-win32" is. Can some please explain what this is?

It's a graphics memory usage. The only solution I see is to [[How do I upgrade my graphics drivers?|update your graphics drivers]] because it's not recommended to change an extension you are not going to maintain.
Note that in Firefox 15 (released on August 28), leaky extensions won't leak in Firefox. See [http://blog.kylehuey.com/post/21892343371/fixing-the-memory-leak Kyle Huey's blog post].

Hi can someone explain what the following error code mean and how i can recifty to download a copy of ebook purchase Error getting License. License Server Communication Problem: E_ACT_NOT_READY

Hi can any one help
I keep getting the following error code when I try and down a ebook which I have purchase
Error getting License. License Server Communication Problem:
E_ACT_NOT_READY
can someone advise me what this means and how I recifty the problem to enable me to read the ebook purchase?
Thanks

I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon.

Can Someone Explain what each of These Entities Mean?

-T_PARAMETER
Thank-you.

Where are you seeing this? In debugger?
This.....
Looks like an object reference, at least the first part anyway. You are seeing this in debugger, right?
Regards,
Rich Heilman

Can someone explain what DriverID=22 does exactly.

Hi everyone,
There is a very popular dsn-less connection provided by Jeff Patterson that most people are saying works great....
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
// set this to a MS Access DB you have on your machine
String filename = "d:/java/mdbTEST.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}"; // add on to the end
// now we can get the connection from the DriverManager
Connection con = DriverManager.getConnection( database ,"","");
However, when I use this code I get a login or password is incorrect error.
If I remove the DriverID=22 the connection works fine. (btw - I am adding SystemDB= to the connection string because I am using a workgroup security file)
I am just wondering if anyone knows why DriverID=22 does not work if you are using a workgroup security file.
Also, does anyone know why he ends READONLY=true with a closing brace when there is no opening brace????
If it helps i'll post my code, i just need to know how to post it properly on this forum (cut and paste looks crappy - no colours or tabs)
Thanks a million.

Here is a pseudo explaination of driverid...
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/odbc/htm/odbcjetdesktop_database_drivers_architecture.asp
Here is another link which defines it for excel...
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/odbc/htm/odbcjetexcelsqldriverconnect.asp
And if you drill on this you get the specific explaination for 22...
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/odbc/htm/odbcjetexcelsqlconfigdatasource.asp
And have you tried any of the other URLs for MS Access which include neither driverid nor readonly?

Can someone explain what these 5 connections refer to?

Similar Messages

Maybe you are looking for