Can someone help figure out why I can't make a duplicate version of a photo in Aperture?

Can someone help me figure out why I can't make a duplicate version of a photo in Aperture?

I will request your query to be transferred to the Aperture forum where knowledgeable Aperture users will be able to assist you.
Ciao.

Similar Messages

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

I need some help figuring out why parts of my form don't work

I have built a couple forms to use with my work, the first 1 is a write up sheet that I fill out while on a field job. When complete, I have an insert button that inserts times, dates customer info and employee info into a MYSQL database that is pertinent to the second form which is a standard type timecard. It is with the timecard form that I am having problems. On the timecard form I have a radio button list with seven buttons (1 for each "start/stop" row of the timecard) when I click a button it makes a subform on the second page visible that allows me to insert the data from my database into the start/stop field of the timecard. I used the action builder to make these subforms visable and invisible and this all works except for 1. Also one of the subforms won't insert the data. I can't for the life of me figure out why, I have gone over both problems and don't see anything to cause it. I was hoping that I could upload my form and database somewhere and have somebody look it over, maybe I have overlooked something but at this point I have studied the problems for 3 days and haven't figured either out. any help would be greatly appreciated
Thanks

Yes, after the last iOS. So is that different than the App update I just did through the app store? Or is there a different version app that I need to go download again?

I need help figuring out why my computer is running so slowly

My computer suddenly decided to run incredibly slow to the point where it struggles to open and run any programs aside from web browsers. It's gotten so bad I've had to force quit most if not all of my programs that I've tried to run. It's been running slower than usual for a little while now but not noticeably so. After I installed photoshop cs6 is when I noticed it began running REALLY slow. I've since then uninstalled photoshop completely but my computer is still running really slow. I've no idea why it's so slow I've tried restarting and rebooting my computer to no avail. Below is my EtreCheck specs and whatnot. Please help me
EtreCheck version: 2.1.3 (106)
Report generated December 16, 2014 at 10:48:38 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:27
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (593.12 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
OPTIARC DVD RW AD-5970H
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/PeerGuardian.app
[not loaded] xxx.qnation.PeerGuardian (1.1.11 - SDK 10.2) [Support]
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.18) [Support]
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.18) [Support]
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.18) [Support]
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.18) [Support]
/Library/StartupItems/SymAutoProtect
[not loaded] com.Symantec.kext.SAVAPComm (12.1 - SDK 10.5) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.6) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Support]
Startup Items: ℹ️
ciscod: Path: /System/Library/StartupItems/ciscod
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
[running] com.symantec.quickmenusa.application.plist [Support]
[running] com.symantec.savdiskmountnotify.application.plist [Support]
[running] com.symantec.scannotification.application.plist [Support]
[running] com.symantec.symsecondarylaunch.application.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.cisco.anyconnect.vpnagentd.plist [Support]
[loaded] com.ciscosystems.ciscoconnect.daemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[loaded] com.tunnelbear.mac.tbeard.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
[loaded] xxx.qnation.PeerGuardian.locum.plist [Support]
User Launch Agents: ℹ️
[loaded] com.facebook.videochat.[redacted].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
[failed] com.spotify.webhelper.plist [Support]
[invalid?] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
smcFanControl Application (/Applications/smcFanControl.app)
Google Drive Application (/Applications/Google Drive.app)
pploader Application (/Applications/PeerGuardian.app/Contents/Library/LoginItems/pploader.app)
pplogger Application (/Applications/PeerGuardian.app/Contents/Library/LoginItems/pplogger.app)
Google Chrome Application (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Support]
Safari Extensions: ℹ️
We Heart It [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Perian [Support]
SymAutoProtect
Symantec\nQuickMenu [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      4% WindowServer
      0% sysmond
      0% BBLaunchAgent
      0% fontd
      0% Google Chrome
Top Processes by Memory: ℹ️
198 MB Finder
172 MB ocspd
172 MB Google Chrome
146 MB mds_stores
86 MB Image Capture Extension
Virtual Memory Information: ℹ️
2.68 GB Free RAM
3.62 GB Active RAM
1.31 GB Inactive RAM
974 MB Wired RAM
2.76 GB Page-ins
53 KB Page-outs
Diagnostics Information: ℹ️
Dec 16, 2014, 09:55:45 PM Self test - passed
Dec 16, 2014, 08:34:42 PM gimp-2.8_2014-12-16-203442_[redacted]-Friedmans-MacBook-Pro-1.hang
Dec 16, 2014, 08:32:49 PM gimp-2.8_2014-12-16-203249_[redacted]-Friedmans-MacBook-Pro-1.hang
Dec 16, 2014, 08:31:52 PM Preview_2014-12-16-203152_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 08:22:01 PM gimp-2.8_2014-12-16-202201_[redacted]-Friedmans-MacBook-Pro-1.hang
Dec 16, 2014, 08:22:00 PM gimp-2.8_2014-12-16-202200_[redacted]-Friedmans-MacBook-Pro-1.hang
Dec 16, 2014, 05:20:45 PM ColorSync Utility_2014-12-16-172045_Rach...diag [Details]
Dec 16, 2014, 05:08:13 PM ROESEngine_2014-12-16-170813_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 04:15:41 PM identityservicesd_2014-12-16-161541_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:48:41 PM Adobe Photoshop CS6_2014-12-16-154841_Ra...diag [Details]
Dec 16, 2014, 03:39:45 PM Adobe Photoshop CS6_2014-12-16-153945_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:39:38 PM Adobe Photoshop CS6_2014-12-16-153938_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:39:19 PM Adobe Photoshop CS6_2014-12-16-153919_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:38:58 PM Adobe Bridge CS6_2014-12-16-153858_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:38:56 PM Adobe Bridge CS6_2014-12-16-153856_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:38:36 PM Adobe Photoshop CS6_2014-12-16-153836_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:38:35 PM Adobe Photoshop CS6_2014-12-16-153835_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:38:34 PM Adobe Photoshop CS6_2014-12-16-153834_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:36:33 PM Adobe Photoshop CS6_2014-12-16-153633_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:36:23 PM Adobe Photoshop CS6_2014-12-16-153623_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:36:21 PM Adobe Photoshop CS6_2014-12-16-153621_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 03:29:03 PM DocumentPopoverViewService_2014-12-16-15...crash
Dec 16, 2014, 03:18:49 PM Adobe Photoshop CS6_2014-12-16-151849_Ra...diag [Details]
Dec 16, 2014, 02:25:00 PM Dock_2014-12-16-142500_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:57 PM Adobe Photoshop CS6_2014-12-16-142357_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:39 PM Adobe Photoshop CS6_2014-12-16-142339_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:26 PM Adobe Photoshop CS6_2014-12-16-142326_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:09 PM Adobe Photoshop CS6_2014-12-16-142309_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:02 PM Adobe Photoshop CS6_2014-12-16-142302_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:23:00 PM Adobe Photoshop CS6_2014-12-16-142300_[redacted]-Friedmans-MacBook-Pro-1.crash
Dec 16, 2014, 02:22:47 PM Adobe Photoshop CS6_2014-12-16-142247_[redacted]-Friedmans-MacBook-Pro-1.crash

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Need help figuring out why multiple X servers screws up keyboard

This is a bit tricky to explain so I hope I can be clear enough.
Normally when running under X the key sequences like ALT-F1 or CTRL-ALT-DEL are trapped by the X server. This forces you to use CTRL-ALT-F1 and CTRL-ALT-DEL doesn't usually do anything unless you set it up in your window manager or whatever.
I'm running multiple X servers on my machine, one on the default VT7 and another on VT8 (both using the same keyboard, mouse, and video cards). The problem is when I start the second X server the first one stops trapping those special sequences. In other words, if I press ALT-F1 in the first X server it actually changes to VT1 or if I press CTRL-ALT-DEL it shutdown/reboots the machine. The second X server works like normal and traps those sequences.
Anyone know what's going on? It is some sort of problem with sharing the keyboard between two X servers? I used to run this configuration years ago and never had a problem.
Last edited by oz (2012-01-11 20:57:24)

Pressing Alt-Sysreq-R ("raw" keyboard mode magic key) seems to do the same thing. Is there some way to reset the keyboard back to normal after doing that? Without restarting X.

I'm using Firefox 3.6.23 on my windows 2000 and lately i've been having issues with web pages loading and need help figuring out why.

Some of the issues : '''1'''. Page loads blank showing web address in tab. Try reloading usually with no results.(problem have the most!) '''2'''. Message appears "problem loading page, server not found" (diff times & diff websites). '''3.''' Pg with msg "oops link broke, DNS error, server not found" then lists suggested links to sites for fix though all links connect to site IGEARED.COM. (new issue) I don't know what to do please help me identify and fix my issue(s) in english, kind of a newbie : ). thx

Try this.
Type in the address bar about:config.
Accept the warning.
In the page that appears, in the Filter box, type network.http.max-connections. Change the value to 32 (which is probably set to 256 in your case).
Close that page. Restart the browser.

Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

Deborah,
The solutions on here did not work for me.   I tried.....
I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
(1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
(2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
(3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
(4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
(5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
(6) I do not have it in airplane mode or silent mode.
(7) I reset all settings using Setttings > General > reset > reset all settings . this wipes settings but not data and media.
This is really frustrating.

Please help!!! Poor performance Neo2...can't figure out why!!

Hi people,
I have worked on this issue for days!! I cannot figure it out! Here is the problem:
I used to have a Soltek AND Asus A8V mobo (both via chipsets), and scored approx 12,890 in 3dmark03 and 5,100 in 3dmark05, respectively ON BOTH BOARDS!
I have swapped out these boards with the msi neo 2 (latest revison) w/ bios 1.4. I have the SAME other equipment as shown in my signature.
I only get approx 9,800 in 3dmark03 and 3,889 in 3dmark 05. Roughly a 2,000/1,000 point lower difference respectively.
I cannot for the life of me figure out why. I have thought about this for days and searched this and many other forums to no avail.
I have installed the latest nforce 6.14 driver and the forceware 67.02. I have tried other drivers as well, using driver cleaner between installs. Still no go.
Bios is set at optimized default. AGP fast writes disabled. AGP Aperature size 256. The 6800gt is oc'ed to 400/1100. No oc on mobo.
I also did a search and found a review of this board w/ a 3dmark03 bench using the same video card as mine that shows a mark of 15,500 @ resolution 640x480.
So I tried the same test @ resolution 640x480 and scored 2,000 less marks.
I just don't understand this. Can someone please help and try to shed some light on this for me. I am SO perplexed about this!!

Why are you not using the Soltek or Asus A8V anymore?
i have almost the same machine as you and i to am very disappointed with the performance of my setup.
I have also tried other drivers and installing differecnt OS's (win2k, winXPsp1, winXPsp2), which did not seem to help. although drivers did make my benchmarks vary depending on dirver and OS.
I was just about to buy either the soltek 939 pin board or the asus A8V, to see if i can solve my performane issues.
the only other board that looks really good is the gigabyte GA-K8NSNXP-939, but this board also has an nforce3 chipset and i am begining to think that the nforce3 chipset sux.
The only other explanation for the lack of performance or perceived lack of performance is that we are running 64bit CPUs under a 32bit environment and therefore using only half the power of these CPU's.

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Can't figure out why "Offline" Pls -Help!

I am running a HP Officejet Pro k5400 Series on a network through a print server running Windows Server 2008 64bit. I have the printer installed and configured and was working fine however, now it is offline and I cannot figure out why. I have redirects and they work fine. The diagnositc shows that it is fine and "ready". Yet if I try to print to the actual printer, not one of the redirects, I eventually get a message that the printer is offline. If it's a network issue then the redirects shouldn't be working either! What am I missing?????

Here is a good article on things you can do.http://discussions.apple.com/docs/DOC-4032 You should back up your drive in case you need to do a clean install. Adding more ram can also help. Check in disk utilities and repair permissions. Also look and see how much free space you have. As a rule the minimum is 10%, more is better. If you have some large apps putting them on an external dive can free up you start up volume.

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Can anyone out there help me figure out why I am having trouble opening a gray scale tiff in ID and

I have been opening tiffs and coloring them successfully for years, and all of a sudden it is not working. I made a logo in Illustrator, saved it as an ai, opened that in PS, saved as a grayscale tiff, and then opened it in ID. First the white background box was there, so I went back into Illustrator and knocked out group, then in PS preserved transparancy. I succeeded in losing the white box, but then in ID when I tried to color it, nothing happened. I checked all my ID settings, and just cannot figure out why this is happening.

Colorizing in ID works for NON-transparent grayscales or Bitmap mode raster files only.
A Bitmap mode image in a frame filled with [None] and colorized will appear transparent in the white areas, but you'll need to ad a clipping path for grayscale, or change the blend mode and live with overprints, which you probbly don't want.

I need help to figure out why I can not do my app update from either my pc or iPhone.

I need to figure out why I cannot update my apps from either my iPhone or my pc

what happens when you try and update? what error messages do you get (if any)?

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

Can someone help figure out why I can't make a duplicate version of a photo in Aperture?

Similar Messages

Maybe you are looking for