Can someone help me set Labview to recognize my AT-MIO-16E-10 board?

I'm running Labview 5.1 on WinNT. I recently had to re-image my PC and have now lost connection to the AT-MIO-16E-10 board. Can anyone show me how to set this up? I cannot remember if an installation CD came with the board. If so where can I get another one?
Thanks for any help out there.

1.) Is it even being picked up by the OS (i.e., does it shown up under Start » Settings » Control Panel » Devices?)
2.) I thought that was a legacy board, which means it should only use Ni-DAQs up to 6.1:
http://digital.ni.com/public.nsf/allkb/1B9B1721F634F4FB862568E4006A73B7
you can also try the NI DAQ installation troubleshooter:
http://www.ni.com/support/daq/comprob/nt/isapnp.htm
Message Edited by Jonnie 5 on 03-17-2006 01:13 PM
2006 Ultimate LabVIEW G-eek.

Similar Messages

Can someone help me set up Hotmail on the e72

hi everyone
i recently bought a new nokia e72, online, from Virgin Australia
and i cant set up the email on it.. ive taken it to the virgin shop and they told me it was a nokia problem
When i begin the email setup wizard it connects through the packet data - not wireless and it asks me to begin the wizard- i click start
it then opens a list of different email carriers and i select 'hotmail'
i then enter my email address and password and it says 'detecting email settings' and then has no message of confirmation and returns to the list of email carriers.
ive tried setting it up so many times and it hasnt worked at all.
can anyone help me set this up please
thanks guys
btw. my email address has the '.com.au' end - would this affect anything??

the e72 is forcing the use of the nokia messaging which has been in the crapper for months now.
in order to bypass it and use the integrated symbian email client, do not select the hotmail, select "other" and enter the email information. when you get to the TOS (terms of service), tap skip/no/cancel in order to NOT use the Nokia Messaging. then just use your standard settings for hotmail for your inbound and outbound ports.

Can someone help with setting up debugging?

This is my first time trying to debug native methods. I have the "Essential JNI" book by Rob Gordon, which is good, but it is out of date and gives incomplete and incorrect information about debugging using Microsoft's VC++. Can someone give me guidance on this?

I assume that you are implementing native methods in a VC++ DLL. You have written a java program that defines the native methods, and calls them.
I also assume that you are able to get from the java code into your DLL, but don't know how to debug the DLL. (If you aren't getting to the DLL, then you have a java problem, and have to debug that first; alternatively, you may have problems with mismatches between your java and your DLL. These probrelms are a pain in the butt, but ultimately do not require any special debugging setup.)
To debug the DLL:
o open the workspace/project in the VC++ IDE.
o Set any desired breakpoints.
o Select the menu item Project/Settings, and select the debug tab in the popup dialog.
o Enter java.exe as the executable to be used during debugging. Here is a sample entry:
D:\jdk1.3.1\jre\bin\java.exe
o Set up the command line so that java.exe runs your java application. Here is a sample entry:
-classpath d:\MyServer\tests\ -Djava.library.path=d:\MyDllDebugDir\ MyTest
At this point you should be able to hit the execute button and wind up at the first breakpoint in your DLL.

Can someone help me set up my router?

i have a buffalo router with bridge mode a.k.a accesspoint capability. now, i am familiar with setting up the router in router mode. but recently i got a new connection which comes along with a dhcp enabled modem and uses static ip. i just have to plug in the modem to the macbook and net starts working. i dont need to set the ip either. however, i case the ip is wrong all i need to do is set the fixed ip in 'network' and its up and running.
now i tried setting my buffalo router in access point mode with both automatic as well as manul ip configs but it doesnot work. infact it doesnot accept my ip saying that my ip and gateway are of differnt domain. buffalo has no online supprt or proper documentation.
i know this is apple exclusive website but since this has got to do with networking with my mac i posted here. can someone give me step by step instrections? thanks in advance.
Neerav

cable modem is handling the dhcp.
to use a router properly then it is best to turn off the dhcp server in the cable modem. You only want it to pass the WAN (Public IP address) to the router.
So you connect the cable modem to your router's wan port. You then connect your mac to the router using a ethernet cable. Then you configure the router using its WebUI by entering its ip address into your webrowser usually http://192.168.0.1 or 192.168.1.1 etc
These are generic instructions.
Then you setup your internet connection to receive ip automatically.
Then goto router's wireless settings. Change the SSID to a name of your choosing other than the brand name of the router.
Change the wifi security to WPA-psk, tkip and set a good strong WPA passphrase.
Save the setttings.
Remove the ethernet cable from your mac click the airport icon in the menu bar, choose your new network and enter your wpa password.

Can someone help me set up my email on my Pantech Breakout

This is my third phone in a month,,,, I have been lied to, support and customer service sucks.... My first two phones were iPhones... they were in German and no one new how to change it. I got a second one.. it did the same... When I called customer service in the beginning of this mess.... she told me that in order to sign for another 2 years... I had to buy 2 phones... I have a family plan.... it was a lie...she got fired.
Now I am stuck with another **** phone that no one can figure out... I am returning this one too. My cable company can't help me and either can Verizon..... I want to pull my hair out.. in the very least!!

Hey there,
I found a good YouTube video.... watch this and if you still need help, let me know
snow
http://www.youtube.com/watch?v=DAjIDgfZu8I&feature=related

Can someone help me setting up mail...

i have a google mail account and wanted help setting mail so i can check emails straight from there. i'm a bit confused when it comes up to the imap/pop sectios as i don't know what google uses when it comes to these kind of settings.
please help.

crafty_me,
I believe Ernie was pointing you toward the information you need, and telling you that you first have to set up your gmail account to use either POP or IMAP (either one can be used with gmail). He then asked that you narrow down any additional problems you might have by carefully reading the information provided by gmail support, before coming back here with those specific questions.
He doesn't need to "chill," and you do not need to apologize. Based on what you originally posted, with no indication of what problems you might be having beyond "I cannot set up gmail," we could only tell you how to set up Mail to access our email. Makes sense, doesn't it?
We'll need you to make an attempt using the appropriate instructions (which he gave), then come back if you need more help.
Scott

Can Someone Help Me Set Up Basic Faxing in 10.3.9?

I have a USR Sportster modem connected to my G4 via a serial-to-USB adaptor. OSX sees the modem; I know this because I can use the modem to autodial my phone from Now Contact (I'm lazy) and I can make OSX try to dial an internet connection (which I dont need since I have cable modem). But I can find no place to set up the fax; I can't add it to the Fax List.
In the Print&Fax prefs, I have the Faxing tab filled out.
In the Internet Connections window, I see "USA19H33P1: Idle" (this is the name of the port that the USB/serial driver creates). If I click on the icon for that port, I see "CONFIGURATION: Modem Configuration:" If I put a phone number in there and press connect, I hear the modem dial it.
But there's something missing because when I try to fax from the PRINT dialog and I pull down the Modem list (which says No Fax Selected) and select Fax List, there are no fax "machines" listed and no ADD button.
What do I need to do? How do I get my modem added to the Fax List?

I also have a US Robotics Sportster modem connected to my G5 via a Keyspan USA-28x USB Twin Serial Adapter.
The following web pages may be useful:
1) http://discussions.apple.com/thread.jspa?messageID=1467446
2) http://forum.macsales.com/viewtopic.php?t=1767
3) http://www.macosxhints.com/article.php?story=20041227101057929&query=bluetooth+m odem
For the Device URI, I used "fax://dev/cu.KeySerial1". Yours will be different depending on the serial port used.
I can now print to fax using the "Fax PDF..." option and the fax modem will dial but I haven't tested whether or not the fax goes through completely. I also haven't tested fax receiving so I don't know if creating symbolic links for cu.modem and tty.modem is necessary.
Quad G5 2.5 GHz Mac OS X (10.4.5)

Can someone help me set my classpath plz?

its URGENT!
I had one and thought that I had one and then I must have lost it.
PLZ HELP ME !!

Your path is your own, noone can show you your path,
come on you already know that..
..feel the Dao..
[Chorus]:
So cum on feel the noize
Girls rock your boys
We get wild, wild, wild,
We get wild, wild, wild,
So cum on feel the noize
Girls rock your boys
We get wild, wild, wild,
At your door

WRT160N can someone help me set up a configuration so I can play Age of Empires 2 online?

Currently I am not able to sucessfully join or host games.
I tried TCP/IP option, but no one can find me, I can't join other's games.
I tried gamespy, no avail. Unable to connect.
I disabled my windows firewall and linksys's SPI firewall. Any advice? Thanks!

Try Opening a Port number for your games i.e : 23978. To open the port on your router you need to login to your Router setup page click on Application and Gaming Tab and Click on Port Trigerring and Type in that Port Number in all 4 boxes and in Application Name type "AE" and click on save settings. This should solve your Problem.

Can someone help re setting up sub-folders on a POP email account

My email is through btinternet and I think it is a POP account (no expert on this sort of thing!). Is it possible to have sub-folders on a POP email account on your iPhone? Or is this only on IMAP? If I can't do it does anyone have any recommendations on which email provider is the best for the iPhone and is there anyway to map my old address to my new one?
Sorry if being incredibly thick here!?
PS. Am I right that on text messaging there is no way to forward texts that are sent to you (eg, jokes)?

Welcome to the discussions!
I do not believe you can have subfolders on POP accounts. Exchange, IMAP, Gmail and Yahoo! do support it however. Gmail/Yahoo! is free so it's hard to beat that price!
If they allow it, you may be able to setup email forwarding on your BT account. Log into the web-based version of the account and see if it is offered.
As of right now, you are not able to forward text messages. Hopefully they'll add this soon.

Can someone help me set up my router settings so that my PS3 works properly

I have an Airport router running version 6.1 and a PS3 and am having trouble consistantly connecting to the PS3 network.

Hey there,
I found a good YouTube video.... watch this and if you still need help, let me know
snow
http://www.youtube.com/watch?v=DAjIDgfZu8I&feature=related

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

I want to set up my videos on my iPad mini by artists, not songs. can someone help me?

i want to set up my videos on my iPad mini by artists, not songs. can someone help me?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the side, back, or bottom of your computer. Please do not include your serial number.
Also provide the model number of your Bose speakers for our review. If your computer is running Windows 8, you can access to Windows Control Panel by typing "control panel" while on the "Modern" desktop. All of the system settings and information will be available there.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Can someone help me set Labview to recognize my AT-MIO-16E-10 board?

Similar Messages

Maybe you are looking for