Can someone help me understand why my i tunes stop working after my library comes up?

Can someone please help me understand why my i tunes stop working after my library comes up?

Hello generousdragon,
It sounds like you are unable to use iTunes shortly after launching it. Use the following article to help troubleshoot the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with this step to isolate 3rd party plugins that may be causing an issue, an use the rest of the troubleshooting if needed.
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

HT3529 Can someone help me understand why my iMessage no longer works on my iPad

Can someone help me understand why my iMessage no longer works on my iPad

iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime and iMessage activation

Can someone help me understand why the search engine will not do anything when I click the search icon or press enter, and why new windows won't open when I click on a link that should open one?

When I type something in the search engine at the right hand corner of the screen it will not allow the search to take place. What I mean is I either click the icon or press enter and nothing happens. I would understand it better if it at the very least gave me a error message. I have also noticed that things like the opening of a new window via a link will not work. An example is I was just on www.walmart.com and when I clicked on an image in order to see a larger one no window opened. I also recently noticed that when I had a lot of tabs open the shortcut menus and menus in general did not load completely or really at all keeping me from saving the pages as bookmarks. I know this could be from low internet speed, a lot of tabs etc..., but I've had many more tabs open than I had then and it worked. Plus all I did was delete or close one tab and suddenly it worked. I then recovered the tab and it still worked even though I was back at the original amount of tabs. I have the latest version of firefox, not counting the beta, and I don't know of any way to solve the two main problems.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this. Thanks.

I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this.

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

Why CD audio reproduction stop working after about 20 minutes

Why CD audio reproduction stop working after about 20 minutes.
The energy saving options seem to be ok

Welcome to Apple Support Communities marimonf. We are sorry you are having problems with what sounds like you burning a CD. These documents may provide some useful information:
iTunes 12 for Mac: If you have trouble burning a disc
iTunes 12 for Mac: Burn settings
iTunes 12 for Mac: Create your own CDs and DVDs

My iPhone say no songs can be transfer to my iPhone from from itunes library. I cant find a reason for this explaination could someone help me understand why it tells me that?

My iPhone says no songs can be transfered to my iPhone from my itunes music Library. I cant find a reason for this error, can someone help me fix or understand why it tells me this?

look in your files on your computer and make sure the songs are still located somewhere on the actual computer.
open up your start menu and search for one of the songs

Can someone help figure out why I can't make a duplicate version of a photo in Aperture?

Can someone help me figure out why I can't make a duplicate version of a photo in Aperture?

I will request your query to be transferred to the Aperture forum where knowledgeable Aperture users will be able to assist you.
Ciao.

Why do some apps stop working after update to iOS 6?

I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for. Why did this happen?

I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day. I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game. I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again. I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
EDIT
Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
Went to open it again, and it of course crashed back to the desktop again. So there is some issue with it that is making it unstable.
I have to keep pushing on either one of the app icons continuously until one of them starts, and then the other one will start.
Gameloft needs to do an update.
Message was edited by: Sonic Bodhi

Can someone help me understand console logs?

I'm trying to figure out if my computer was used today and what was done. Can someone tell me what the console logs mean?
I closed my Mac at 6am and I can figure out why it shows activity at 810 am....
Thank you.
2/11/13 8:10:20.008 AM SyncServer[12761]: [0x7fdf6840bdf0] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
2/11/13 8:10:20.000 AM kernel[0]: Wake reason: EC.SleepTimer (SleepTimer)
2/11/13 8:10:20.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
2/11/13 8:10:20.000 AM kernel[0]: Previous Sleep Cause: 5
2/11/13 8:10:20.000 AM kernel[0]: en0: 802.11d country code set to 'X0'.
2/11/13 8:10:20.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2/11/13 8:10:20.000 AM kernel[0]: TBT W (1): 0 [x]
2/11/13 8:10:20.427 AM hidd[89]: MultitouchHID: device bootloaded
2/11/13 8:10:20.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
2/11/13 8:10:20.460 AM configd[17]: network changed: v4(en0-:10.0.1.3) DNS- Proxy- SMB
2/11/13 8:10:20.587 AM awacsd[58]: InnerStore GetWakeInfoForZone: zero address for 81236581.members.btmm.icloud.com.
2/11/13 8:10:20.596 AM awacsd[58]: KV HTTP 0
2/11/13 8:10:20.998 AM iCalExternalSync[12903]: [0x7ff658c0e4d0] |Miscellaneous|Error| SyncServices precondition failure in [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
2/11/13 8:10:20.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
2/11/13 8:10:20.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
2/11/13 8:10:20.999 AM iCalExternalSync[12903]: [ICalExternalSync ]Encountered exception: [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
} withStack: (
0   iCalExternalSync                    0x00000001023fda60 iCalExternalSync + 125536
1   iCalExternalSync                    0x00000001023ecac9 iCalExternalSync + 56009
2   iCalExternalSync                    0x00000001023fc694 iCalExternalSync + 120468
3   libdyld.dylib                       0x00007fff8cacd7e1 start + 0
4   ???                                 0x0000000000000007 0x0 + 7
2/11/13 8:10:21.000 AM iCalExternalSync[12903]: [ICalExternalSync ]NSException name:ISyncInvalidArgumentsException reason:[ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
2/11/13 8:10:21.002 AM SyncServer[12761]: [0x7fdf6840bdf0] |Server|Warning| lost connection 0x7fdf692395e0 to com.apple.iCal
2/11/13 8:10:21.417 AM com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7f846c10c670> Mon Feb 11 07:03:13 2013 EST (approx)
2/11/13 8:10:21.417 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f846c10c670> Mon Feb 11 07:03:13 2013 EST (approx)
2/11/13 8:10:21.000 AM kernel[0]: Graphics suppressed 1168 ms
2/11/13 8:10:22.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 10:9a:dd:81:af:c2 MAC AUTH succeeded
2/11/13 8:10:22.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
2/11/13 8:10:22.000 AM kernel[0]: AirPort: Link Up on en0
2/11/13 8:10:22.000 AM kernel[0]: en0: BSSID changed to 10:9a:dd:81:af:c2
2/11/13 8:10:22.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
2/11/13 8:10:22.000 AM kernel[0]: AirPort: RSN handshake complete on en0
2/11/13 8:10:22.975 AM configd[17]: network changed: v4(en0+:10.0.1.3) DNS+ Proxy+ SMB
2/11/13 8:10:23.017 AM awacsd[58]: InnerStore GetWakeInfoForZone: zero address for 81236581.members.btmm.icloud.com.
2/11/13 8:10:23.018 AM mDNSResponder[42]: Double NAT (external NAT gateway address 172.28.117.122 is also a private RFC 1918 address)
2/11/13 8:10:23.019 AM UserEventAgent[11]: Captive: en0: Not probing 'Josh's Wi-Fi Network' (protected network)
2/11/13 8:10:23.028 AM configd[17]: network changed: v4(en0!:10.0.1.3) DNS Proxy SMB
2/11/13 8:10:23.374 AM airportd[12869]: _doAutoJoin: Already associated to “Josh's Wi-Fi Network”. Bailing on auto-join.
2/11/13 8:10:23.517 AM mDNSResponder[42]: ERROR: socket closed prematurely tcpInfo->nread = 0
2/11/13 8:10:31.000 AM kernel[0]: hibernate image path: /var/vm/sleepimage
2/11/13 8:10:31.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/11/13 8:10:31.000 AM kernel[0]: sizeof(IOHibernateImageHeader) == 512
2/11/13 8:10:31.000 AM kernel[0]: kern_open_file_for_direct_io(0) took 0 ms
2/11/13 8:10:31.000 AM kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 400000 ssd 1
2/11/13 8:10:31.000 AM kernel[0]: hibernate image major 1, minor 0, blocksize 512, pollers 5
2/11/13 8:11:01.881 AM mDNSResponder[42]: ERROR: socket closed prematurely tcpInfo->nread = 0
2/11/13 8:11:09.299 AM iCalExternalSync[12910]: [0x7ffd33c0e4d0] |Miscellaneous|Error| SyncServices precondition failure in [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
2/11/13 8:11:09.301 AM iCalExternalSync[12910]: [ICalExternalSync ]Encountered exception: [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
} withStack: (
0   iCalExternalSync                    0x000000010e03aa60 iCalExternalSync + 125536
1   iCalExternalSync                    0x000000010e029ac9 iCalExternalSync + 56009
2   iCalExternalSync                    0x000000010e039694 iCalExternalSync + 120468
3   libdyld.dylib                       0x00007fff8cacd7e1 start + 0
4   ???                                 0x0000000000000007 0x0 + 7
2/11/13 8:11:09.301 AM iCalExternalSync[12910]: [ICalExternalSync ]NSException name:ISyncInvalidArgumentsException reason:[ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
    "com.apple.ical.sound" = Basso;
    "com.apple.syncservices.KeepAwayFromServers" = 1;
    "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
    owner =     (
        "Event/p1283"
    sound = Basso;
    triggerduration = "-1800";
2/11/13 8:11:09.305 AM SyncServer[12761]: [0x7fdf6840bdf0] |Server|Warning| lost connection 0x7fdf6923a000 to com.apple.iCal
2/11/13 8:11:13.230 AM Printer Pro Desktop[230]: Empty task
2/11/13 8:11:19.000 AM kernel[0]: hibernate_alloc_pages flags 00000000, gobbling 0 pages
2/11/13 8:11:19.000 AM kernel[0]: hibernate_setup(0) took 47756 ms
2/11/13 8:11:22.000 AM kernel[0]: en0: BSSID changed to 10:9a:dd:81:af:c2
2/11/13 8:11:22.000 AM kernel[0]: LE is supported - Disable LE meta event
2/11/13 8:11:22.000 AM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
2/11/13 8:11:22.000 AM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
2/11/13 8:11:22.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
2/11/13 8:11:22.000 AM kernel[0]: hibernate_page_list_setall start 0xffffff8097de9000, 0xffffff8097e09000

OS X Mountain Lion: About Power Nap

Can someone help me understand what the measurement em stands for?

I have been running into the measurement em (or is it en) and I cannot find an explanation as to what it means. Can someone explain it to me with an example or two?
Thank you
Allen Macfalda

Murray *ACP* wrote:
It's a relative font metric. 1em means use the browser's default size, while .5em means use half the browser's default size. The default size is usually 16px, unless changed by some other CSS on the site.
Hi
To add to whar Murray has written, the relative font metric actually comes from the size of the letter 'm'. This means that if you have a width of 20em it will be 20 times the width of the letter 'm' in your chosen font not the browsers default font, (thats the theory). Some older browsers may use the browsers default font, (NN4, I did say old!) or even a few current mobile browsers.
It is also possible, (in a few modern browsers) to use en or ex for the mesurement, and these are based on the letter 'n' and 'x' respectively.
PZ

Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?

Our company is trying to switch from paper based reviews to the electronic shared reviews, and Adobe XI was selected. (Window 8, Acrobat XI) However, we are having a great deal of difficulty.
Our problem is that we would like to be able to attach small files (Word, jpeg, etc.) during the Send for Shared Review as described in the videos and online help.
What we have experienced is this:
1. A reviewer attaches the file using the Comments paperclip, publishes the Comments, and then closes.
2. When they, another reviewer, or the initiator opens the document, the Name of the file changes to "Unknown" and the name of the file w/ extension appears in the Description in the Attachments list. This makes the file unopenable.
Has anyone else experienced this? During the initial period while the file name still appears under Name in the Attachments list, it is openable. When that name shifts to the Description field it is lost.
Here is how we are doing it:
Choose the paperclip under Comments - Annotations
Choose the place in the document and click it to select.
Choose the file from the popup box and click Open.
Click OK to select the icon, and it is placed in the document. The file name now appears in the list of Attachments in the left side of the document. Using the single arrow (to the right) it shows the attributes (Name, Description, Modified, Size, Compressed Size.) The name appears under Name, the Description is blank, the Modified, Size and Compressed Size fields are filled in. Since everything is completed, press Publish Comments.
When the initiator or another reviewer opens it, the name is now Unknown and the file name is under Description and there is no way to identify the file or open it.
Can someone please help us with what we are doing wrong? They make it sound so simple, but nothing we try works. This was one of several feature that management really wanted.
Thanks, Diane

Hello Anoop,
1. We are hosting our Shared Review Workflows on our internal network server using Windows 7 (not 8), 64 bit.
2. Yes, all the other reviewers and I are using the most current version of Acrobat Pro.IX or Acrobat Reader (version 11.0.08) with the exception of one reviewer who is using Acrobat Reader 8.
The reviewer using Adobe Reader 8 is the only one who does not have the problem. She attaches a file in a slightly different manner (Attach file as a comment) and her file attachments can be opened and viewed by everyone.
I have discussed this in the Adobe User Community Bulletin Board for "How to work with comment tools in Acrobat XI." Lori Kassuba was able to replicate the problem during a shared review and thinks it may be a bug:
The title of the entry is:
How to work with comment tools in Acrobat XI
You can see the comment at the following URL:
http://acrobatusers.com/tutorials/how-to-work-with-the-comment-tools
Hi Diane Yarger,
I was able to replicate the same thing during a shared review so I think you may have run into a bug. Please post this issue here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Thanks,
Lori
As Lori suggested, I reported this problem as a potential "bug" to the cfusion link above. No one has contacted me about it.
Diane Yarger

Please can someone help me have tried to get icloud to work on ipad and iphone 4

Hi everyone
have set up icloud on both ipad2 and iphone but it is not pushing the data to each device? It says it has backed up am I doing something wrong please can someone tell me how to get it to work, many thanks

You only need to enter your information once. Ideally, turn on iCloud first. If you have already entered data in multiple devices and then turn on iCloud, you may have some duplicates to clean up.
You don't need to have anything plugged in. Just turn on iCloud. Your pictures will show up on all devices.

Why did Firefox suddenly stop working after an update?

I installed the most recent Firefox update and it now refuses to work. The message I get is: Firefox cannot be opened because of a problem. Check with the developer to make sure Firefox works with this version of Mac OS X.........
I installed the most recent update for OS X. According to Mozilla, it should run on the version I have; 10.6.4
I tried opening the system profiler and it won't even do that. Help!

Mac OS X 10.4 and later - [http://www.mozilla.com/en-US/firefox/system-requirements.html OK].
1) Please take a screenshot of the issue and attach the image to your post.
2) Please explain how you tried to start the profile manager (see also [[Managing profiles]]).

Can someone help me understand Photos app?

Hello I use the ipad2 which came with the Photo app already installed. I am quite happy taking and uploading pics to Photo but get very confused with how the app actually works.
Firstly the tabs, Photo - Photostream- Albums - Places. I place my photos into albums but have noticed there is already an album called Camera Roll which seems to be a duplicate of all my pics! Why? Then if I click on the Photo tab I seem to have all the pics again, annoying! Also if I delete a pic from an album it says deleting from album but keeping in photo library, what is this? I did download iPhotos as I wanted to do some editing but they gave me my pictures again!! I'm concerned that all this duplication will gobble up by memory, would that be correct? I have also tried deleting the original photo app and just using iPhoto or another app but it won't let me! I would really like to understand this app, any explanation would be appreciated, thank you

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Can someone help me understand this? (java generics wildcards)

Hi all.
First of all this is my first post on sun forums. Besides that i only used java for few weeks now and i think java is quit a nice language.
I do have a question regarding java generics and wildcard casting (if you can call it that).
Assume you have following code.
public class Test <T extends Number> {
     private T x;
     Test(T x)
          this.x = x;
     T getX()
          return x;
     <U extends Number> void setX(U x)
          this.x = (T)x;
public class Main {
     public static void main(String[] args) {
          Test<Integer> p = new Test <Integer>(5);
          System.out.println(p.getX());
          p.setX(53.32);
          System.out.println(p.getX());
}This compiles with following results:
5
53.32
Question:
First: If I declared p to be of type Test<Integer> then why did x in Test class changed its type from Integer to Double?
Second: Is this a possible unchecked casting behavior? and if so why does this work but doing something like this :
Integer x = 5 ;
Double y = 6.32;
x=(Integer)y;fails with compile time error?

Hello and welcome to the Sun Java forums.
The behavior you describe would not occur if your setX(?) method used T instead of another type constraint.
However, let's look at why it works!
At line 1 in main, you create your Test with a type parameter of Integer; this becomes the type variable T for that particular instance of Test. The only constraint is that the type extends/implements Number, which Integer does.
At line 2 you obtain a reference to a Number, which is what getX() is guaranteed to return. toString() is called on that object, etc.
At line 3 you set the Number in the Test to a Double, which fits the type constraint U extends Number, as well as the type constraint T extends Number which is unused (!). Note that using a different type constraint for U, such as U extends Object or U super Number, could cause a compile-time error.
At line 4 you obtain a reference to a Number, which is what getX() is guaranteed to return.
The quirky behavior of setX is due to the second type constraint, which is obeyed separately; in this case, you probably want to use void setX(T x) {
this.x = x;
}edit: For the second part of your question, x = (Integer)y; fails because Integer and Double are distinct types; that is, Integer is not a subclass of Double and Double is not a subclass of Integer. This code would compile and work correctly: Number x = 5 ;
Double y = 6.32;
x=y;s
Edited by: Looce on Nov 15, 2008 7:15 PM

Can someone help me understand why my i tunes stop working after my library comes up?

Similar Messages

Maybe you are looking for