Can someone help me with the XDcam transfer workflow for EX3 footage?

I'm trying to bring in a ton of BPAV footage but can't seem to figure out the workflow. I've backed up the raw footage, but how do I get it to an editable format in FCP 7?

Use XDCam Transfer to wrap it as a quicktime. Should be available on Sony's website. I believe once you have it installed, you can bring it in straight inside FCP (using Log & Transfer), but I generally just open up XDCam Transfer without opening up FCP (usually right after we finish shooting or bring the cards back) and save it to the desired location, then drag the files into my FCP project at a later time.

Similar Messages

Can someone help me with the March 2014 Promotion for a free iphone 5c?

Extremely disappointed in a promotion I took advantage of way back in March 2014 for a free 5c iphone. I purchased the "free" phone and was told I would see the $200 credit on my account in 1-3 months. Time ticked on and I never did see this credit on my monthly bill. I phoned the Verizon number and spoke to someone who tried to research this issue. He told me best to go to the store where I purchased the phone. Went to the store but was told to contact the manager and district manager via email. Did that attached a copy of my order and credit card statement showing the purchase of the phone. Seemed pretty straightforward according to the manager - especially since he too remembered this promotion. Needed to talk to Verizon corporate and the promotion number. No one seems to know of this promotion - as noted in this community. Have had a run around for the past 2 1/2 months on this with the store manager. After having to reach out again on the status of this issue I was told the best they could do is give me a $100 credit for merchandise in the store. This is not acceptable. My family has been a long standing good customer of Verizon and I am very ready to jump ship. All I want is the promotion that I was offered. It appears that many people had this same occurrence happen to them. Some seem to have had it resolved. Can anyone at Verizon help me on this? Does anyone know the promotion code so that maybe I could do the job that Verizon isn't doing!

Phone was purchased at the Verizon Store in Alpharetta GA on Rucker Rd and Crabapple Rd.
I contacted Ryan << removed >> via email per the sales guy at the store's sales guys recommendation.
Ryan had me working with the store Manager, Keith << removed >>. Keith worked hard at first but as of late has dropped the ball on getting this done. I only get information when I reach out to him....either calling the store, emailing or visiting the store in person. Usually, he is busy (naturally) and makes a call to someone at corporate but the person on the other end isn't there. The response he seems to get is this is not a valid promotion. He in person has told me that he himself remembers this promotion.
I don't want any other equipment/devices from the store. I really just want my $200 bill pay credit.
I was in the store on 3/31/14 but the phone had to be ordered since it wasn't in stock. It eventually shipped to my in the end of April. I have attached the email for validation. Also in there are the other phones that were purchased on my credit card for verizon. You will note I did purchase a 5s on the 3/31/14 as well.
Please keep me in the loop on this...and let me know what you find.
I will be so appreciative if you can get me the promotion number and/or credit our account.
Julie<< removed >>
Content edited by Verizon Moderator to comply with Verizon Wireless Terms of Service

Can someone help me with the quickstart tutorial? I'm stuck.

alright, i've never done java in my life and I tried doing this quickstart tutorial like 5 times.
http://www.netbeans.org/kb/60/java/quickstart.html
I'm fine until I get to the point to where it tells me to get to the helloworldapp.java
At this point I click The src then I click the +src to try to get to the subfiles. There is nothing...it's just a blank folder. I do not understand why that is. Can someone please help me?

I guess you have to download the sample code and create/import the project.
I have never followed the tutorials with net beans myself, so I can't help you there. But My impression is that you have failed at properly
setting up your environment so far.
[]s
Notivago.

Can Someone Help Me With the Axiom 25

this thing is a little tough to get around.... all i really want is to be able to transpose the trigger pads. it's been a real headache for me. i realize the potention of all this stuff but the manual seems like it could be whole lot more user friendly. the response and expression are beautiful though. all i need is a few hints, i've been lookng for forums online and haven't found anything...thanks in advance

I don't have the Axiom, but I do have a Trigger Finger so I can kind of relate. The best thing to do, at least with the Trigger Finger, is to use M-Audio's software called Enigma (should have come with your Axiom - otherwise you can download it from their site) to program the different presets available to your controller. It's simple drag and drop stuff and should get the job done!
Hope that helps.

Can someone help me with the best software to create EDDM postcards?

first off if I am in the wrong forum can someone please suggest a better forum to post
I own a small service based company and I want to design my own EDDM cards that I can send out to potential clients. Is InDesign the best software within cost reason to purchase that can help me design a beautiful, well created layout that will grab my potential clients attention?
Anthony

You are asking the wrong question. The exact same piece of software, no matter the price, can be used to design either beautiful, well crafted layouts, or ill-conceived, ineffective ones.

Can someone help me with the tilt controls for this phone

Hey, I have a 2G Iphone. Everything seems to work perfect on it, and I got it pretty much new. The guy before me had it for a week.
The tilt controls almost work perfectly, except when I place it on a flat table during a game, and don't touch it, my game character moves on it's own. It seems like it's almost impossible to have it level. I was wondering if this is just the way it is for these controls, or if I have to hold it a certain way to make it work?
Thanks

That'd be up to the developer of the game. Some offer a calibration feature - with this, you could calibrate it in the flat (horizontal) postition on your table. Otherwise, they likely default to a typical angle at which most people hold the phone.
Cheers!
-Bryan

Can someone help me with the iphone diagnostic tool?

I was trying to use the Iphone diagnostic tool, and i use the ticket number they gave me but it says ticket not found. How can i fix this?

The Magic Wand is subject to the sample size you've set for the color picker.
Yes, I know it seems silly. Personally I think it's a bug that these essentially unrelated things should be connected.
Try this:
1. Open an image.
2. Click the foreground color patch in the tools bar.
3. Right-click on the image somewhere. What's your sample size?
4. Change it to Point Sample.
5. Cancel the Color Picker.
Now your magic wand should work better.
I wouldn't have known this but for having been there myself recently.
-Noel

Can someone help me with the error : " ORA-00942"

Hello there!
I try to run this script and I get the error "table or view does not exists". I can`t figure out why :( Could someone please help me?
First of all I have the table:
drop table A_Vanzare
create table A_Vanzare(
IdVanzare NUMBER(3),
IdProdus NUMBER(3),
IdClient NUMBER(3),
Cantitate NUMBER(5) CHECK(Cantitate>=0),
DataV DATE
...and I want to backup the data in this table by creating another table, something like a history table. Here is the script that gives me the error:
SET SERVEROUTPUT ON;
DELETE FROM A_BackupVanzare;
DECLARE
     varIdCursor NUMBER; --cand e apelat OPEN_CURSOR => i se atribuie valoare
     varCreateTableString VARCHAR2(1000); --sql sir de create
     varInsertValues VARCHAR2(1000);--sql sir pt inserarea valorilor
     varNrRows INTEGER;
     CURSOR cursorVanzare IS SELECT IdVanzare,IdProdus,IdClient,Cantitate,DataV FROM A_Vanzare;
     varIdVanzare A_Vanzare.IdVanzare%TYPE;
     varIdProdus A_Vanzare.IdProdus%TYPE;
     varIdClient A_Vanzare.IdClient%TYPE;
     varCantitate A_Vanzare.Cantitate%TYPE;
     varDataV A_Vanzare.DataV%TYPE;
BEGIN
     varIdCursor := DBMS_SQL.OPEN_CURSOR;--ia id`ul cursorului
     varCreateTableString := 'CREATE TABLE A_BackupVanzare (
                                        bckIdVanzare NUMBER(3),
                                        bckIdProdus NUMBER(3),
                                        bckIdClient NUMBER(3),
                                        bckCantitate NUMBER(5),
                                        bckDataV DATE)';
     DBMS_SQL.PARSE(varIdCursor, varCreateTableString, DBMS_SQL.V7);
     varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
--exec cod SQL
     EXCEPTION
     WHEN OTHERS THEN
          IF SQLCODE!=-955 THEN --exista tabela
               RAISE;--erors
          ELSE
               DBMS_OUTPUT.PUT_LINE('Tabelul exista deja!');
          END IF;
--popularea tabelei
BEGIN
     varInsertValues := 'INSERT INTO A_BackupVanzare(bckIdVanzare, bckIdProdus, bckIdClient, bckCantitate, bckDataV) VALUES (:IdA,:IdP,:IdC,:Cant,:Data)';
     DBMS_SQL.PARSE(varIdCursor, varInsertValues,DBMS_SQL.V7);
     OPEN cursorVanzare;
          LOOP
               FETCH cursorVanzare INTO varIdVanzare, varIdProdus, varIdClient, varCantitate, varDataV;
               EXIT WHEN cursorVanzare%notfound;
               DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdA',varIdVanzare);
               DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdP',varIdProdus);
               DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdC',varIdClient);
               DBMS_SQL.BIND_VARIABLE(varIdCursor,':Cant',varCantitate);
               DBMS_SQL.BIND_VARIABLE(varIdCursor,':Data',varDataV);
               varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
               --executie cod
               DBMS_OUTPUT.PUT_LINE('Numarul inregistrarilor transferate in backup este:'||varNrRows);
          END LOOP;
     CLOSE cursorVanzare;
     DELETE FROM A_Vanzari;
EXCEPTION
          WHEN OTHERS THEN
                    RAISE;--erori
     DBMS_SQL.CLOSE_CURSOR(varIdCursor); --close cursor
     COMMIT;
     END;
END;
The error rises up at the line with "END LOOP;" and I don`t understand why.
Thank u a whole lot!!!

Irina,
Don`t be too hard on me, it`s just a small part of my homework.I'm sorry, I didn't want to be hard... :-)
...but it still does not work from the first execution, even with that BEGIN-END block inserted. Nevertheless, the code given earlier should work :
SQL> drop table A_Vanzare
2 /
Table dropped.
SQL> create table A_Vanzare(
2 IdVanzare NUMBER(3),
3 IdProdus NUMBER(3),
4 IdClient NUMBER(3),
5 Cantitate NUMBER(5) CHECK(Cantitate>=0),
6 DataV DATE
7 )
8 /
Table created.
SQL>
SQL> insert into A_Vanzare
2 select 1,1,1,1,sysdate from dual union all
3 select 2,2,2,2,sysdate from dual union all
4 select 3,3,3,3,sysdate from dual ;
3 rows created.
SQL>
SQL> SET SERVEROUTPUT ON;
SQL> DROP TABLE A_BackupVanzare;
Table dropped.
SQL> --First execution
SQL> DECLARE
2     varIdCursor NUMBER; --cand e apelat OPEN_CURSOR => i se atribuie valoare
3     varCreateTableString VARCHAR2(1000); --sql sir de create
4     varInsertValues VARCHAR2(1000);--sql sir pt inserarea valorilor
5     varNrRows INTEGER;
6     CURSOR cursorVanzare IS SELECT IdVanzare,IdProdus,IdClient,Cantitate,DataV FROM A_Vanzare;
7     varIdVanzare A_Vanzare.IdVanzare%TYPE;
8     varIdProdus A_Vanzare.IdProdus%TYPE;
9     varIdClient A_Vanzare.IdClient%TYPE;
10     varCantitate A_Vanzare.Cantitate%TYPE;
11     varDataV A_Vanzare.DataV%TYPE;
12
13 BEGIN
14     BEGIN
15         DBMS_OUTPUT.PUT_LINE('1st begin');
16         varIdCursor := DBMS_SQL.OPEN_CURSOR;--ia id`ul cursorului
17         varCreateTableString := 'CREATE TABLE A_BackupVanzare (
18         bckIdVanzare NUMBER(3),
19         bckIdProdus NUMBER(3),
20         bckIdClient NUMBER(3),
21         bckCantitate NUMBER(5),
22         bckDataV DATE)';
23         DBMS_SQL.PARSE(varIdCursor, varCreateTableString, DBMS_SQL.V7);
24         varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
25         --exec cod SQL
26     EXCEPTION
27     WHEN OTHERS THEN
28        IF SQLCODE!=-955 THEN --exista tabela
29           RAISE;--erors
30        ELSE
31           DBMS_OUTPUT.PUT_LINE('Tabelul exista deja!');
32        END IF;
33     END;
34     --popularea tabelei
35
36     BEGIN
37        DBMS_OUTPUT.PUT_LINE('2nd begin');
38        varInsertValues := 'INSERT INTO A_BackupVanzare(bckIdVanzare, bckIdProdus, bckIdClient, bckCantitate, bckDataV) VALUES (:IdA,:IdP,:IdC,:Cant,:Data)';
39
40        DBMS_SQL.PARSE(varIdCursor, varInsertValues,DBMS_SQL.V7);
41
42        OPEN cursorVanzare;
43        LOOP
44           FETCH cursorVanzare INTO varIdVanzare, varIdProdus, varIdClient, varCantitate, varDataV;
45           EXIT WHEN cursorVanzare%notfound;
46           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdA',varIdVanzare);
47           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdP',varIdProdus);
48           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdC',varIdClient);
49           DBMS_SQL.BIND_VARIABLE(varIdCursor,':Cant',varCantitate);
50           DBMS_SQL.BIND_VARIABLE(varIdCursor,':Data',varDataV);
51           varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
52           --executie cod
53           DBMS_OUTPUT.PUT_LINE('Numarul inregistrarilor transferate in backup este:'||varNrRows);
54        END LOOP;
55        CLOSE cursorVanzare;
56        DELETE FROM A_Vanzare;
57
58     EXCEPTION
59     WHEN OTHERS THEN
60          RAISE;--erori
61          DBMS_SQL.CLOSE_CURSOR(varIdCursor); --close cursor
62          COMMIT;
63     END;
64 END;
65 /
1st begin
2nd begin
Numarul inregistrarilor transferate in backup este:1
Numarul inregistrarilor transferate in backup este:1
Numarul inregistrarilor transferate in backup este:1
PL/SQL procedure successfully completed.
SQL>
SQL> select * from A_BackupVanzare;
BCKIDVANZARE BCKIDPRODUS BCKIDCLIENT BCKCANTITATE BCKDATAV
           1           1           1            1 06/01/07
           2           2           2            2 06/01/07
           3           3           3            3 06/01/07
3 rows selected.
SQL> insert into A_Vanzare
2 select 4,4,4,4,sysdate from dual union all
3 select 5,5,5,5,sysdate from dual ;
2 rows created.
SQL> --Second execution
SQL> DECLARE
2     varIdCursor NUMBER; --cand e apelat OPEN_CURSOR => i se atribuie valoare
3     varCreateTableString VARCHAR2(1000); --sql sir de create
4     varInsertValues VARCHAR2(1000);--sql sir pt inserarea valorilor
5     varNrRows INTEGER;
6     CURSOR cursorVanzare IS SELECT IdVanzare,IdProdus,IdClient,Cantitate,DataV FROM A_Vanzare;
7     varIdVanzare A_Vanzare.IdVanzare%TYPE;
8     varIdProdus A_Vanzare.IdProdus%TYPE;
9     varIdClient A_Vanzare.IdClient%TYPE;
10     varCantitate A_Vanzare.Cantitate%TYPE;
11     varDataV A_Vanzare.DataV%TYPE;
12
13 BEGIN
14     BEGIN
15         DBMS_OUTPUT.PUT_LINE('1st begin');
16         varIdCursor := DBMS_SQL.OPEN_CURSOR;--ia id`ul cursorului
17         varCreateTableString := 'CREATE TABLE A_BackupVanzare (
18         bckIdVanzare NUMBER(3),
19         bckIdProdus NUMBER(3),
20         bckIdClient NUMBER(3),
21         bckCantitate NUMBER(5),
22         bckDataV DATE)';
23         DBMS_SQL.PARSE(varIdCursor, varCreateTableString, DBMS_SQL.V7);
24         varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
25         --exec cod SQL
26     EXCEPTION
27     WHEN OTHERS THEN
28        IF SQLCODE!=-955 THEN --exista tabela
29           RAISE;--erors
30        ELSE
31           DBMS_OUTPUT.PUT_LINE('Tabelul exista deja!');
32        END IF;
33     END;
34     --popularea tabelei
35
36     BEGIN
37        DBMS_OUTPUT.PUT_LINE('2nd begin');
38        varInsertValues := 'INSERT INTO A_BackupVanzare(bckIdVanzare, bckIdProdus, bckIdClient, bckCantitate, bckDataV) VALUES (:IdA,:IdP,:IdC,:Cant,:Data)';
39
40        DBMS_SQL.PARSE(varIdCursor, varInsertValues,DBMS_SQL.V7);
41
42        OPEN cursorVanzare;
43        LOOP
44           FETCH cursorVanzare INTO varIdVanzare, varIdProdus, varIdClient, varCantitate, varDataV;
45           EXIT WHEN cursorVanzare%notfound;
46           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdA',varIdVanzare);
47           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdP',varIdProdus);
48           DBMS_SQL.BIND_VARIABLE(varIdCursor,':IdC',varIdClient);
49           DBMS_SQL.BIND_VARIABLE(varIdCursor,':Cant',varCantitate);
50           DBMS_SQL.BIND_VARIABLE(varIdCursor,':Data',varDataV);
51           varNrRows := DBMS_SQL.EXECUTE(varIdCursor);
52           --executie cod
53           DBMS_OUTPUT.PUT_LINE('Numarul inregistrarilor transferate in backup este:'||varNrRows);
54        END LOOP;
55        CLOSE cursorVanzare;
56        DELETE FROM A_Vanzare;
57
58     EXCEPTION
59     WHEN OTHERS THEN
60          RAISE;--erori
61          DBMS_SQL.CLOSE_CURSOR(varIdCursor); --close cursor
62          COMMIT;
63     END;
64 END;
65 /
1st begin
Tabelul exista deja!
2nd begin
Numarul inregistrarilor transferate in backup este:1
Numarul inregistrarilor transferate in backup este:1
PL/SQL procedure successfully completed.
SQL>
SQL> select * from A_BackupVanzare;
BCKIDVANZARE BCKIDPRODUS BCKIDCLIENT BCKCANTITATE BCKDATAV
           1           1           1            1 06/01/07
           2           2           2            2 06/01/07
           3           3           3            3 06/01/07
           4           4           4            4 06/01/07
           5           5           5            5 06/01/07
5 rows selected.
SQL> HTH,
Nicolas.

Can someone help me with the error to prepare my project?

"This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
I get this error when I want to open my project file in adobe cs6.
The project file is only psd-formats, because I'm making a animation..
Two days ago I open it and there was nothing wrong.. But now when I want to open it, I get this error..
I did nothing with my MacBook Pro and it is my end project of school..
So please someone can help me?
(Sorry for the bad english.. I'm a Dutch boy)
- Jordy

Might want to read this:
http://helpx.adobe.com/premiere-pro/kb/missing-sequence-presets.html
http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html

Can someone help me with the application?

Hello there,
I have a problem:
I have made this layout and I can not find the functions.
I would like to have: if the user selects a region and a different year, then it should be displayed on
the left diagram beneath.
If the user selects - in the second row - a region and a year, then it should be displayed in the right diagram.
<a href="http://www.haus-horngacher.at/1222.jpg">http://www.haus-horngacher.at/1222.jpg</a>
You can see it here.
Please help me, thank you!
Regards
Markus

..as you can see in the picture the to (region, year) in the first
row should be imaged in diagram1. The two in the second line should
be imaged in the second diagram.
Above there is a simple Excel-Table
looks like this:
                Jahr 2008                   Jahr 2009            Jahr 2010
Region1     44                                   44                         43
Region2      43                                   43                         43

Can someone help me with the URL to download FB 4.7?

I am having issues with case 0209731770 where the URL provided to me for the free upgrade to Flash Builder 4.7 didn't work. I got a response that I would need technical support. The link they gave me was https://www.adobe.com/cfusion/tdrc/index.cfm?product=flash_builder2 but this didn't work. Anybody know the correct link? Thanks!

Check this link :-
https://www.adobe.com/cfusion/tdrc/index.cfm?product=flash_builder

Can someone help me with the new IPod5th generation touch?

I'm trying to download music and movie videos to the IPod5 from my PS3. I have it connected and all but isn't showing anything or how i can download.

This is the iPhone forum, not iPod. See this:
iOS: Device not recognized in iTunes for Windows

Can somebody help me with the sound/vibrate settings for Whatsapp messenger. For the Iphone 5S?

How do i instaal vibration when i get a whatsapp message?
When i get a whatsapp message, my phone stay quit. But when i open whatsapp he vibrats ones!
I want him to vibrate everytime, when he is on lock.

The iCloud ID that you log into Find My iPhone on the computer, or on the app has to match the one the other devices are logged in with. The Find My iPhone has to be turned on in iCloud settings as well.You do not need to have the app installed on the phone. That app is only used to try and locate another iOS device. It does not activate the Find My iPhone on the device, that is done in settings.
EDIT: See this support document for more information about Find My iPhone. http://support.apple.com/kb/PH2696
Message was edited by: ChrisJ4203

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.

I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App stores and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can someone help me with the XDcam transfer workflow for EX3 footage?

Similar Messages

Maybe you are looking for