Can someone please convert this file into a LabVIEW 8.0 vi?

Hello All! I created this vi using my school's computers. The problem is that the school uses LabVIEW 8.1.2, whereas I use LabVIEW 8.0. Because of this difference, I cannot open this vi. Does anyone have any tips/suggestions that I can use to open this vi?
Thanks.
Message Edited by jl478 on 10-28-2007 01:34 PM
Attachments:
GraphData.vi ‏193 KB

Try this.  It was looking for subVI's for DAQmx Base (I don't know what that is or how it's differerent from normal DAQmx).  But you should be able to relink those subVI's
Attachments:
GraphData[1].vi ‏200 KB

Similar Messages

  • Can someone please convert this vi (8.2.1) to 8.0

    can someone please be kind enough to convert this vi I made during class (version 8.2.1) to version 8.0 (which is what I have at home)?
    Thanks.
    Attachments:
    accelerometer.vi ‏19 KB
    accelerometer1.vi ‏19 KB

    Thank you for helping jl487 out Dennis!
    FYI, jl487, LabVIEW has the options File » Save for Previous Version ... that you can use in the future.
    Kameralina
    Ask NI (ni.com/ask)
    Search The KnowledgeBase
    NI Developer Zone
    Measure It. Fix It. ni.com/greenengineering/
    NI Vision ni.com/vision/

  • Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    I don't think that Adobe offers any software to convert .azw4 files.  Search Google for alternate converters.

  • Can someone please test this widget?

    Hi,
    (sorry if this is in the wrong forum but I couldn't find a better place)
    Can someone please try this widget?
    http://www.apple.com/downloads/dashboard/information/speciesdistributionmap.html
    The map shows on 2 out of 3 of the macs in the office but we can't determine why it doesn't work on the third... If you can see the map, then it works. We can't spot any difference in the settings on the machines
    Many many thanks!
    Tim

    I have the i7-720 and the processor and I can attest to the W510 overheating. I recently had my planar replaced under warranty and it returned with an overheating issue for heavy processor loads.  This overheating was resolved by properly applying thermal paste (lenovo applied about 3x as much as was needed)  while the GPU continues to overheat and cause stuttering. If I run furmark in any resolution for a length of time at maximum fan speed and watch the GPU overheat, throttle, and overheat again. This would all be fine if it didn't cause the whole system to lag terribly in games or on the desktop.
    In my view the design of the GPU cooler and thermal pads for the GPU memory cooling are very sensitive to installation. The cooler is easy to bend and the pressure clamp for the GPU isn't really designed to a certain tolerance. It's simply a clamp with a bent part that will apply some random amount of pressure to the gpu cooler.
    It's just such a delicate system of cooling that there is too much room for error. It has to be installed correctly in order to function properly and I don't think there is really a good way of making sure that you've done it without running benchmarks for hours after reinstalling the cooler. I don't think this is something Lenovo is going to do. There aren't any options from Lenovo for a better heat sink design and I am pretty sure not everyone is having these issues.
    So I'm going to mess with the GPU cooler until it starts working. Here's a furmark screenshot showing the temps.
    Link to picture
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

  • Can someone please convert a CS 5.5 file to idml? Need to open in CS5.

    I need to open a CS5.5 file but need it converted to idml to open in my version of InDesign. Can someone please help?

    Hello,
    Please excuse me for burdening you but could it be possible
    to help me converting a 5.5 indesign file to indesign 5.0 (idml)?
    Thanking you in advance,
    Fokion

  • Can someone please Interpret this EtreCheck for me? Macbook Pro Boot Time Really Slow.

    Can someone please give me detailed instruction on what to do no next. I've read several forum discussion on this subject and seen various examples. i would like help with mine. Reason being is because my MBP boot up time is almost around 2-3mins long sometimes it can even be upto 5mins. reason i ask is because i know this is not normal. compared to my macbook (mid-2010) this is REALLY slow. And all the specs of my MBP should in theory make my MB a thing of the past. (Why i bought the MBP in the first place). i've done PRAM reset and booted in Safe Mode. i've removed several applications using the correct uninstalls where required.
    i have ran a terminal commands to clear the kernal caches and got these results (not sure if it will help). And neither have made a difference.
    Password:
    macs-imac:~ SantiagoXG$ sudo kextcache -system-prelinked-kernel
    kext com.paceap.kext.pacesupport.snowleopard  507029000 is in exception list, allowing to load
    kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    macs-imac:~ SantiagoXG$ sudo kextcache -system-caches
    Password:
    macs-imac:~ SantiagoXG$
    Below is the EtreCheck:
    Hardware Information:
              MacBook Pro (Retina, 15-inch, Early 2013)
              MacBook Pro - model: MacBookPro10,1
              1 2.7 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
              NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:15
    Disk Information:
              APPLE SSD SD256E disk0 : (251 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 250.01 GB (135.34 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 44
    Kernel Extensions:
              com.paceap.kext.pacesupport.snowleopard          (5.7.2)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.maintain.AutoLoginUserScreenLocked.plist 3rd-Party support link
              [System] com.maintain.CocktailScheduler.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.soma-zone.LaunchControl.Helper.plist 3rd-Party support link
              [System] PACESupport.plist 3rd-Party support link
    Launch Agents:
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.maintain.LogOut.plist 3rd-Party support link
              [System] com.maintain.Restart.plist 3rd-Party support link
              [System] com.maintain.ShutDown.plist 3rd-Party support link
              [System] com.maintain.Sleep.plist 3rd-Party support link
              [System] com.maintain.SystemEvents.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
              [not loaded] com.nero.HSMMonitor.plist 3rd-Party support link
    User Login Items:
              WDDriveUtilityHelper
              WDSecurityHelper
    Internet Plug-ins:
              DirectorShockwave: Version: 11.5.8r612 3rd-Party support link
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
              Flip4Mac WMV Plugin: Version: 2.3.5.4 3rd-Party support link
              OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
              OVSHelper: Version: 1.1 3rd-Party support link
              Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              QuickTime Plugin: Version: 7.7.3
              RealPlayer Plugin: Version: (null) 3rd-Party support link
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              Slick Savings: Version: 1.0
              Searchme: Version: 1.2
              Ebay Shopping Assistant: Version: 1.1
              Amazon Shopping Assistant: Version: 1.1
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              FUSE for OS X (OSXFUSE)  3rd-Party support link
              Java  3rd-Party support link
              M-AudioFastTrack  3rd-Party support link
              MacFUSE  3rd-Party support link
              NTFS-3G  3rd-Party support link
              Perian  3rd-Party support link
              Tuxera NTFS  3rd-Party support link
    Old Applications:
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Library/Application Support/DivX
                        DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                        DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                        DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
              Wondershare Helper Compact:          Version: 2.2.6.0 - SDK 10.5 3rd-Party support link
                        /Applications/Wondershare Helper compact/Wondershare Helper Compact.app
              SA Color Finesse 3 UI:          Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
                        /Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              dynamiclinkmediaserver:          Version: 6.0.1 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
              DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
              DeTune:          Version: 1.0.6 - SDK 10.5 3rd-Party support link
              DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO - Auto backup turned off
              Volumes being backed up:
              Destinations:
                        SantiagoXG [Local] (Last used)
                        Total size: 0 B
                        Total number of backups: (null)
                        Size of backup disk: Excellent
                                  Backup size 0 B > (Disk size 0 B X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          WindowServer
                   2%          EtreCheck
                   0%          WDDriveUtilityHelper
                   0%          configd
                   0%          imagent
    Top Processes by Memory:
              213 MB          Dock
              147 MB          mds_stores
              147 MB          Google Chrome
              147 MB          com.apple.IconServicesAgent
              131 MB          Google Chrome Helper
    Virtual Memory Information:
              11.91 GB          Free RAM
              2.40 GB          Active RAM
              385 MB          Inactive RAM
              1.31 GB          Wired RAM
              405 MB          Page-ins
              0 B          Page-outs

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutesafter the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

  • Can someone please downsave a file for me please?

    Hi Everybody
    Someone created a menu for us in CS6 and I can open in CS 5.5 but when I do all the text shows up as separate lines so it is hard to edit. Can someone please downsave it for me so I can see it like a normal file? I would be forever grateful.
    Allie

    Hi grimmylina,
    I tried down saving the file but there is no option for CS5.5.
    Did saved file to CS5. Hope you can open it fine as well.
    https://files.acrobat.com/a/preview/00754e78-9ad3-4b94-b35d-bac4b11a0929
    Hope this helps.
    Regards,
    Sumit Singh

  • Can someone please check this podcast episode?

    My podcast site is: https://itunes.apple.com/podcast/jah-works-radio-reggae-radio/id418751172
    On my iTunes, I can't get my 2 most recent podcast episodes to play or download.  Can someone please check on their iTunes?  I think on Macs it may be playing, but I would love to hear if people can get them to play or download on a PC.
    Much Thanks,
    Dave

    Found another case in Mac OS X Technologies
    Notice the second post Re: Display Random Numbers This is Overview no refinement.
    Now
    Refine to Applescript the post is gone. (Trust me it doesn't show up in any other refinement either)
    Click the X next to Applescript and its back:
    The same behavior happens in All Content or Discussions.
    Thought it might be related to tags but this post is tagged applescript so that wouldn't appear to be it.
    Part of the problem is that the 'subgroups' aren't really groups anymore only groupings of post. You use to be able to go to an actual physically group Applescript which was a sub group of the category OS X  Technologies now the only thing that really exists is the top group OS X  Technologies the subgroups are really views into the main group.

  • Can someone please try this and see if this works for them...

    Hi there
    I cannot get the following to work but according to the mainstage manual this should work. Could someone please try this and see if this works:
    a. Create a new concert based on any template. Delete all patches except one (lets call this remaining patch X).
    b. Add a Bass instrument channel strip at the Concert level (by selecting the Concert in the patch list and then hitting the '+' button on the right within the Channel strips and selecting Software Instrument).
    c. Set the Concert level Bass instrument channel strip to play only on the first 2 octaves or so, by setting the Key Range parameters appropriately.
    d. Click on the remaining patch X. You should see that it automatically has your bass instrument as a split on the left hand octaves on the Mainstage keyboard displayed. So everything good so far.
    d. Now save the concert with any name.
    e. Close the concert.
    f. Re-open the same concert again. Click on the patch X. At this point I would expect the Bass instrument to be showing on the lower octaves. This does not happen for me.
    I've spent a couple of days trying to see if I'm doing something wrong, but cannot figure this out. Please please someone let me know the outcome of trying the above. And if I'm doing something wrong to get this to work, kindly let me know.
    thanks
    Ziggy

    Thank you all for your suggestions and taking the time to try this out. I think I've sussed out what the problem is.
    If you create them like Thor mentions that always seems to work. Thor, I don't understand what you mean by hitting the "+" in the channel strip area. Doing this creates an additional channel strip and not a new patch.
    What I was trying to do before was to include all patches in a set as well. So I have my Concert, then a Set, then patches within my Set. If I added a Bass at the concert level, it looks like this was then propagated to all my patches in my set. But when I closed Mainstage and re-opened, the bass wasn't there at the Set or patch level.
    I really think there is a bug with Mainstage, where if you have Sets and patches within sets, any instruments at Concert level do not get inherited by the Set, patches in the set. I've tried this a few times and tried without using Sets. It always seems to work without Sets.
    So the lesson is not to use Sets, if you want to share concert level intruments.
    Once again, thank you guys for trying this out.
    Ziggy

  • Can someone please answer this for me!!!!

    Okay I found all my music on my external hard drive. I have pointed iTunes to the location of the hard drive and the music files. I moved the iTunes.xml and iTunes library file to there as well. It appears iTunes created a new folder called COMPLIATIONS in my music library and alot of my music ended up in there, how can I remove the files from that folder and back into my music library without that whols adding files to the library? Also now half of my music has the exclamtion point on half of them, but the files are in the correct place, how do I fix that as well? Please help me out
    Thanks

    There's no easy solution for your current situation, but keep a few things in mind going forward...
    • The two Library files are hard coded to live in c:\documents & settings\username\My Documents\My Music\iTunes Changing the library location in iTunes preferences will not affect these two critical files.
    • Take care that the external hard drive holding your music files always comes up at the same drive letter, and that it is on-line and available before you launch iTunes.
    I have not seen a Windows utility/script that can rectify the "!"/lost file issue. I also haven't looked for a while - so maybe someone will come along and surprise me with link to something that can do the repair.

  • UT data lost in migration - can someone please confirm this?

    We have just moved our LMS3.2 database onto a new server which is currently running LMS4.01 - I used the CLI backup and restore scripts to move the database (full, not selective). It appears that the UT history has disappeared. I am loathe to lose 18 months of data. so:
    1. Can someone confirm that the UT data should/should not have migrated.
    2. Is there a way of recovering this data and importing it into the new database?
    The 3.2 server is still running, although not collecting data.

    You should have the data if you performed a full backup/restore. 
    1) Check the condition of the backup in the dbbackup.log file on the LMS 3.2 ...\CSCOpx\log directory and confirm is completed successfully. 
    2) Check the restorebackup.log on the LMS 4.01 , maybe there was an issue.
    3) May need to reinstall follwoing these extra instructions:
    Make sure you meet these requirements:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/install/guide/prereq.html
    If the requirements are met, do the following to prep for the install:
    LMS 4.0x must be installed on a clean system with no other applications including previous versions of LMS software.
    1) Make sure you use remote desktop to perform installation and not console.
    2) Be a local administrator not domain administrator, ie create the 
    account locally and add to group administrators and remove group users
    3) Log in as the local admin and then go to My Computer -> Properties ,
    Advanced Tab, Environment Variables. Make sure the USER section TEMP and
    TMP variables are edited to something like C:\windows\temp or C:\temp
    (make sure temp exists)
    4) Go to My Computer -> Properties, Advanced Tab, Performance Options ->
    Advanced Tab. Make sure the page file space is set to the application
    requirements (8 or 16 GB) and is Fixed (not managed by system).
    5) After the uninstall of previous LMS , make sure the installation directory
    is also removed \progra~1\CSCOpx
    6) It is a good idea to reboot between uninstall/install
    7) Stop all firewall / antivirus before install
    8) EXTRACT the files, do not install while in zip format.
    If you are using Windows 2008 R2 it will require a patch, windows 2008
    R1 SP2 does not require this patch.
    http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&os=Windows&softwareid=280775103&release=4.0&rellifecycle=&relind=AVAILABLE&reltype=latest
    Reboot after installation.
    Use the same admin account to now perform the restore (assuming the backup is valid).
    If this does not help, you may want to open a case.

  • Can someone please open this VI?

    I'm new here and I'm sorry if I'm not posting in right section.
    I've done some simple program at laboratory at my university and now I need to write a paper about my work; for that i need some screenshots of my VI.
    Now my problem is that i can open this VI with 7.1 version at my home computer because it was saved on 8.2.
    So my question is can someone open this VI and just post a screenshots of the block diagram and of front panel.
    My deadline is on Monday so it would be perfect if someone could do this tonight.
    Again I'm sorry if the thread is misplaced.
    Thank You in advance.
    P.S: To open VI you might need this driver so I'll attach that too.
    Just copy the driver in ~\LabVIEW 7.1\instr.lib (you probably know this but just to be on the safe side).
    Solved!
    Go to Solution.
    Attachments:
    final.vi ‏22 KB
    Agilent 33XXX Series.7z ‏451 KB

    Sorry I can not convert your Vi since I am sitting on a 8.6 version. But I can see your first draft had a lot no-no programming style. I have made screen shoot showing how to remove some of them. But correct them and do not think much about it. We have all been new to Labview sometime. The most important thing is that you learn something.
    Ps On Google book you will find some good Labview books. Take a look if you need some input
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)
    Attachments:
    sample.PNG ‏15 KB

  • ITune 7 and video ipod - can someone please explain this?

    Is there any chance that iTunes could somehow be forced to allow uploads of movies and TV shows to the iPod with 1.2 update?
    My real question is, someone above says 1.2 is only for other ipods, not 5g video. Can someone confirm or deny this?
    The current situation here is:
    - iTunes 7 wants to update the iPod software, but when I agree to this, it ejects the ipod and the progress gauge keeps showing indefinitely.
    - If I stop the iposervice, the update fails (of course!) with the 1417 error.
    Multiple times:
    + I have reinstalled iTunes7 twice following all the instructions about deleting temp and iptune directories, etc.
    + I have tried disconnecting and resetting during the original update dialog.
    + I have disabled all services and tried all this again
    The two problems remain:
    iPod not recognized by iTunes 7 (but works perfectly with iTunes 6 so it isn't a hardware or Windows problem).
    Forcing recognition by stopping and starting the ipodservice works, but the upgrade to 1.2 fails.
    I could live with all the above by going back to v6, but
    V6 refuses to upload purchased video content to the iPod without the updated software.
    iPod 5g video   Windows XP Pro   normally a reasonable person

    instead of stopping the ipodservice, try eboncairn's
    does that get you past the 1417?
    I did that. Notice that you don't address my question. I found a way to get things working and I'll post it in a second under a new title because I'm guessing a lot of desperate people will want to try it. First here's the answer I was looking for:
    When IT "suggests" yopu upgrade the 5g to 1.2, the initial gauge comes up for about 40 seconds. Then a dialog comes up and after you deal with that about 1 minute 30 secs will go by.
    Then, the Apple logo will appear on the pod and a guage will show the update loading for about 1 minute.
    Finally there's a reboot of about 20 seconds at which time I came in my^H^H I saw the iPod in the iRuines 7 window.
    I will post all the $**** I had to do to get this working under the title, "IT7 1.2 5g update - worked for me"
    Two days of dicking around to watch a movie I'd already paid for.

  • Can someone please repost this in labview 7.0

    I am trying to look at this retriggerable AO Daqmx example written in 7.1 and I am using 7.0, can somebody please downgrade to 7.0 and repost it.
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=0561FA2581F54FEBE0440003BA7CCD71
    thank you!

    Here ya go.  I just did the "Save for Previous", I have no idea if this example actually works in LV 7.0, although I have no reason to think that it wouldn't.
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman
    Attachments:
    Retriggering_Analog_Output_Waveform_Generation.llb ‏114 KB

  • Can someone please decipher this for me

    hello I am a student and up to this poit being my second year in java I have not had any problems. I am working on an asignment but my teacher is away and I don't understand exactly what his assignment asks for. Can someone briefly decipher it for me, any help would be appreciated.
    here it is:
    Define three classes with the following functions and relationship
    among them:
    The class Thought contains a method message which implements to print out the message �I�m a teacher.�;
    The class Advice is a subclass of the class Thought. The class Advice also contains a method message, the name is the same as its
    superclass�, however the method message of class Advice is to print
    out different message �I�m your student.�;
    The class Messages contains a main method and it should instantiate two instances, one is from the class Thought and the other is from the class Advice.

    We're not going to do this for you, but the problem is simple. It may help you to start by drawing what you want on paper.
    You need three classes, named Thought, Advice and Message.
    Thought and Advice each have a method that prints a message, perhaps called printMessage().
    Advice extends Thought.
    Message contains your main method, within which you will create one instance of Advice, and one of Thought.
    The point of the practical is to show how the method in Advice overrides the method in Thought. I am, however disbelieving of the assertion that this is a 2nd year Java practical - it's the kind of thing I'd expect you to tackle after the first lecture.
    (Note that this is merely a rewording of your practical text)

Maybe you are looking for