Can someone please help me locate my ipod 4g
Can someone help me please locate my ipod 4g
Report the loss to the police.
Reporting a lost or stolen Apple product - http://support.apple.com/kb/ht2526 - "... Apple does not have a process to track or flag lost or stolen product..."
Similar Messages
-
Can someone please help me fix my ipod??!!!!!
My ipod 5 has been working perfectly fine all day. but when i got home and tried using it the screen turned pink and has a whole bunch of stripes on it. the screen is also not working. what do i do? or how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
'm trying to transfer the music from my iPhone 3G to my iPod shuffle using iTunes but I don't know how. I checked on websites but i dont really trust them cause I don't want all my music to be erased (cause i spent a lot of money on them) can someone PLEASE help me. Why is iTunes so complicated.
iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
http://arstechnica.com/apple/2011/11/itunes-match-your-questions-answered/
http://ipod.about.com/od/UsingiOS5/a/Itunes-Match-Frequently-Asked-Questions.htm
http://forums.macrumors.com/showthread.php?t=1277415 - deleting items from your computer but saving them in iCloud. Yes, but risky. -
can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave
Start here:
iOS: Device not recognized in iTunes for Windows -
Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.
I would to a Restore. Select the iPod in iTunes. Go to the Summary tab for the iPod. There is a button there to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. After Restore complete, try playing songs on the iPod again.
If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod. All 7th gen nanos are still under warranty. If you have an Apple Store nearby, you should take it to the store's Genius Bar. To minimize waiting, you can make a reservation on store's web page.
http://www.apple.com/retail/ -
i just got the macbook air for christmas and i also got the dr dre headphones so i am trying to enable my soundcheck on my iTunes but i cannot figure out how to find where sound check is located can someone please help!!
Go to the iTunes menu > Preferences > Playback.
-
HT1212 i have tryed recovering my ipod and its not its still disabled can someone please help me
I have tryed recovering my ipod and its still not diabled can someone please help me
Try letting the battery fully drain. After charging for an hour try recovery and DFU modes.
Try on another computer
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
windows thinks my itouch is a camera and itunes says this ipod can't be used because the software isn't installed - reinstall itunes. i've done that and continue to get the same error. can someone please help?
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
Just bought a new Ipod Nano, 6th generation, was tryin to following directions on syncing, when I plug it in too my computer,
it doesnt give me any directions on syncing or connecting to my computer, can someone please help me??There should be an option (on the left hand side of your iTunes) for your iPod. Then when you click on it you will just need to setup and there will be an option to sync at the bottom right hand corner
-
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
I have a ipod 1st gen. its frozen and wont back up. comes up with error code 1. can someone please help.
Hi billewen690,
The resource below may help troubleshoot the issue you are having with your iPod touch being unresponsive.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Last Modified: Jan 14, 2015
Hope that helps ...
- Judy -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
I accidently pressed the home button, sleep/wake up button and the up volume button on my ipod touch 4 gen and it turned on and then off and wont turn on. can someone please help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help me.
I wanna buy a new screen but I don't wanna buy it and it be a waste of money so can someone please help me?Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
Maybe you are looking for
-
Help me guys! I don't know what to do
-
How and why did iOS7 obtain geographic location information on my photos?
I have always kept location services turned off for the iPhone camera. Now, after the iOS7 update, all my photos on my iPad and some on my iPhone are organized into collections by year and include specific geographic location. That's information th
-
After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although
After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although Photoshop does. When I try to open them in Bridge, I receive a popup message that says that it "requires that a qualifying product has been launched
-
Can we combine this into one query, just curious
Dear all; I have a query of the following form select t.id, t.place from tbl_one t where t.create_date < sysdateand select t.id, t.place from tbl_one t where t.create_date < sysdate + 28just curious, can those two queries be combined to one. Thank
-
R/3 4.6C and APO 5.1 integration problems
Hi Frends, I have a problem in integrating R/3 4.6C with APO 5.1. Systems are connected with required standard settings and RFcall is happening beween systems. Publication settings are done for immediate transfer of external procurements in APO. T