Can Someone Please test a file for me in DW8 on a Mac?

This is a long-shot and I know I'm asking a lot.
I have been trying to help someone in America with a page going from table-based layout to CSS. I'm in the UK.
So I sent him a .zip and he gets a screwed up page in DW8 but can view it in his browser. I first asked about this in this thread. Paula's been really helpful but if I can find someone with DW8 on a Mac that might help us identify what might be going wrong between us. I'd need to send you the .zip and ask you to put the folder in a site to see how DW8 likes it. The page validates, is pretty straight-forward and holds up for me in IE5 through 8 and FF.
It shouldn't be a problem.
Thanks
Martin
[Edit] I don't want to post a link to a live page because it's not my site and that seems rude. But if anyone is interested, I can provide a live link by PM.

Hi grimmylina,
I tried down saving the file but there is no option for CS5.5.
Did saved file to CS5. Hope you can open it fine as well.
https://files.acrobat.com/a/preview/00754e78-9ad3-4b94-b35d-bac4b11a0929
Hope this helps.
Regards,
Sumit Singh

Similar Messages

Can someone please downsave a file for me please?

Hi Everybody
Someone created a menu for us in CS6 and I can open in CS 5.5 but when I do all the text shows up as separate lines so it is hard to edit. Can someone please downsave it for me so I can see it like a normal file? I would be forever grateful.
Allie

Hi grimmylina,
I tried down saving the file but there is no option for CS5.5.
Did saved file to CS5. Hope you can open it fine as well.
https://files.acrobat.com/a/preview/00754e78-9ad3-4b94-b35d-bac4b11a0929
Hope this helps.
Regards,
Sumit Singh

HT1459 Locked my ipod and its says Ipod is disabled connect to itunes. Have tried to unlock it - can someone please type the instructions for me to follow - thank you

Locked my ipod and it says ipod is disabled connect to itunes - have tried everyting - can not rememb er password - can someone please type good instructions for me to get back in - thank

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Can someone please post the password for the following HP Mini 110

Customer brought in laptop and did remember the bios password.
We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode. Can someone please post the password for the following HP Mini 110.
Halt code = CNU937BF2X
thanks Andy Mountain Computers Inc.

Hi,
Try:
e9lofxp874
e9lofxp87r

Quick preview issues - can someone please test

Quick preview does not seem to work correctly.
When photographing, I do not have my camera automatically rotate my images. I do this so I can see a full preview on the LCD on the back of the camera. When I download images into Aperture, I rotate manually.
With the advent of Quick Preview, I have begun to use it only to find that with RAW files, the manually rotated image appears squished and not formatted correctly in the viewer (2nd display). Images that were not manually rotated appear fine. For some reason, when photograph in JEPG, the same issue does not surface. All images, manually rotated included, appear fine in the viewer.
Could someone please test if this is happening for themselves too.
Thank you in advance,
Christopher David

Hi,
thanks alot for testing the video.
If anyone can provide any more info, or can show me an
alternative way to embed the video in a webpage (other than
paid-Streaming), I'd be grateful,
thanks.
PS. - the video is from the YouTube website
(www.youtube.com), the .flv file downloaded through KeepVid -
www.keepvid.com .

Can someone please share configFile.xml for crawling Content Server Source

Hi All
I am trying to create a Content Server Source in SES. I am unable to generate the configFile.xml as mentioned in doc, from UCM.
Can someone please share the config file.
Thanks & Regards,
Amit

Hi ,
Thanks lot for replying.
I am using the same versions. There is one xml file getting generated but its name is not configFile.xml
In my test it generated one with df2009-04-21-20-16-22-833434567.xml name.
Please tell me is this the correct file?.
some contents of it are...
Line: -----
<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
version="2.0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xsi:schemaLocation="http://xmlns.oracle.com/orarss C:\project_drive\SES Application Search\SES Format Schma\orarss.xsd">
<channel>
<title>Content</title>
<link>df2009-04-21-20-16-22-833434567.xml</link>
<description>The channel contains a feed for content</description>
<lastBuildDate>2009-04-21T14:46:22.000Z</lastBuildDate>
<channelDesc xmlns="http://xmlns.oracle.com/orarss" >
<feedType>full</feedType>
<sourceName>content_feed</sourceName>
</channelDesc>
<item>
Line: -----
Thanks a lot... :)

Can someone please Interpret this EtreCheck for me? Macbook Pro Boot Time Really Slow.

Can someone please give me detailed instruction on what to do no next. I've read several forum discussion on this subject and seen various examples. i would like help with mine. Reason being is because my MBP boot up time is almost around 2-3mins long sometimes it can even be upto 5mins. reason i ask is because i know this is not normal. compared to my macbook (mid-2010) this is REALLY slow. And all the specs of my MBP should in theory make my MB a thing of the past. (Why i bought the MBP in the first place). i've done PRAM reset and booted in Safe Mode. i've removed several applications using the correct uninstalls where required.
i have ran a terminal commands to clear the kernal caches and got these results (not sure if it will help). And neither have made a difference.
Password:
macs-imac:~ SantiagoXG$ sudo kextcache -system-prelinked-kernel
kext com.paceap.kext.pacesupport.snowleopard 507029000 is in exception list, allowing to load
kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load
kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load
kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load
kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load
kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load
kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load
kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load
macs-imac:~ SantiagoXG$ sudo kextcache -system-caches
Password:
macs-imac:~ SantiagoXG$
Below is the EtreCheck:
Hardware Information:
          MacBook Pro (Retina, 15-inch, Early 2013)
          MacBook Pro - model: MacBookPro10,1
          1 2.7 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
          NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:15
Disk Information:
          APPLE SSD SD256E disk0 : (251 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 250.01 GB (135.34 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Configuration files:
          /etc/hosts - Count: 44
Kernel Extensions:
          com.paceap.kext.pacesupport.snowleopard          (5.7.2)
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.SwitchBoard.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.maintain.AutoLoginUserScreenLocked.plist 3rd-Party support link
          [System] com.maintain.CocktailScheduler.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.soma-zone.LaunchControl.Helper.plist 3rd-Party support link
          [System] PACESupport.plist 3rd-Party support link
Launch Agents:
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.maintain.LogOut.plist 3rd-Party support link
          [System] com.maintain.Restart.plist 3rd-Party support link
          [System] com.maintain.ShutDown.plist 3rd-Party support link
          [System] com.maintain.Sleep.plist 3rd-Party support link
          [System] com.maintain.SystemEvents.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.nero.HSMMonitor.plist 3rd-Party support link
User Login Items:
          WDDriveUtilityHelper
          WDSecurityHelper
Internet Plug-ins:
          DirectorShockwave: Version: 11.5.8r612 3rd-Party support link
          Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
          Flip4Mac WMV Plugin: Version: 2.3.5.4 3rd-Party support link
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          QuickTime Plugin: Version: 7.7.3
          RealPlayer Plugin: Version: (null) 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          Slick Savings: Version: 1.0
          Searchme: Version: 1.2
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          FUSE for OS X (OSXFUSE) 3rd-Party support link
          Java 3rd-Party support link
          M-AudioFastTrack 3rd-Party support link
          MacFUSE 3rd-Party support link
          NTFS-3G 3rd-Party support link
          Perian 3rd-Party support link
          Tuxera NTFS 3rd-Party support link
Old Applications:
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          Wondershare Helper Compact:          Version: 2.2.6.0 - SDK 10.5 3rd-Party support link
                    /Applications/Wondershare Helper compact/Wondershare Helper Compact.app
          SA Color Finesse 3 UI:          Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
                    /Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
          dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          dynamiclinkmediaserver:          Version: 6.0.1 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
          DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
          DeTune:          Version: 1.0.6 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
Time Machine:
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
          Destinations:
                    SantiagoXG [Local] (Last used)
                    Total size: 0 B
                    Total number of backups: (null)
                    Size of backup disk: Excellent
                              Backup size 0 B > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          WindowServer
               2%          EtreCheck
               0%          WDDriveUtilityHelper
               0%          configd
               0%          imagent
Top Processes by Memory:
          213 MB          Dock
          147 MB          mds_stores
          147 MB          Google Chrome
          147 MB          com.apple.IconServicesAgent
          131 MB          Google Chrome Helper
Virtual Memory Information:
          11.91 GB          Free RAM
          2.40 GB          Active RAM
          385 MB          Inactive RAM
          1.31 GB          Wired RAM
          405 MB          Page-ins
          0 B          Page-outs

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutesafter the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

Can someone please test this widget?

Hi,
(sorry if this is in the wrong forum but I couldn't find a better place)
Can someone please try this widget?
http://www.apple.com/downloads/dashboard/information/speciesdistributionmap.html
The map shows on 2 out of 3 of the macs in the office but we can't determine why it doesn't work on the third... If you can see the map, then it works. We can't spot any difference in the settings on the machines
Many many thanks!
Tim

I have the i7-720 and the processor and I can attest to the W510 overheating. I recently had my planar replaced under warranty and it returned with an overheating issue for heavy processor loads. This overheating was resolved by properly applying thermal paste (lenovo applied about 3x as much as was needed) while the GPU continues to overheat and cause stuttering. If I run furmark in any resolution for a length of time at maximum fan speed and watch the GPU overheat, throttle, and overheat again. This would all be fine if it didn't cause the whole system to lag terribly in games or on the desktop.
In my view the design of the GPU cooler and thermal pads for the GPU memory cooling are very sensitive to installation. The cooler is easy to bend and the pressure clamp for the GPU isn't really designed to a certain tolerance. It's simply a clamp with a bent part that will apply some random amount of pressure to the gpu cooler.
It's just such a delicate system of cooling that there is too much room for error. It has to be installed correctly in order to function properly and I don't think there is really a good way of making sure that you've done it without running benchmarks for hours after reinstalling the cooler. I don't think this is something Lenovo is going to do. There aren't any options from Lenovo for a better heat sink design and I am pretty sure not everyone is having these issues.
So I'm going to mess with the GPU cooler until it starts working. Here's a furmark screenshot showing the temps.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Can someone PLEASE test this .flv in Progressive Dreamweaver Embed

hi,
Please can somebody try to embed the following .flv flash
video using Dreamweaver 8 using Progressive Download and let me
know if it works.
http://www.sparklywater.com/flashtest/test_y.flv
If it does not work .. can anyone please let me know why? : (
thanks.

Hi,
thanks alot for testing the video.
If anyone can provide any more info, or can show me an
alternative way to embed the video in a webpage (other than
paid-Streaming), I'd be grateful,
thanks.
PS. - the video is from the YouTube website
(www.youtube.com), the .flv file downloaded through KeepVid -
www.keepvid.com .

Can someone please make an extension for Safari that replicates Tab Mix Plus

I don't use Safari, not because Safari is a terrible browser, not because it doesn't do a good job. I don't use Safari because it refuses to integrate a basic and imperative idea into its structure: Tab Browsing should be intuitive. To that end, I am imploring someone, ANYONE who knows how to create Safari Extensions, please create an extension for Safari that essentially replicates Firefox's Tab Mix Plus.
Most people (I read about 95%) use tabbed browsing on a regular basis, its that important. I'm shocked that Apple hasn't done this already. They would steal all of Firefox's thunder with that simple extension. For me, its 90% of the reason I use Firefox and ignore Safari. With the beauty and simplicity of OS X Lion, I'm stunned that Apple hasn't asked some bored software guy to spend all of 5 minutes to make this thing already. I wish I knew how, I wish I knew how to make extensions and plug ins and apps and all that other stuff, but I don't. All I can do is ask someone out there to please get off the couch and make this thing already. I know that this will more then likely fall on deaf ears and be forgotten by Apple and that's sad.
I hope this sparks some interest in making this happen. I can only hope.

Well of course the person purchasing the "mix" will pay for the individual songs but what I'm
Suggesting is that apple or iTunes comes up with a creative way of sending the "mix" and have a one click download process like when you purchase apps. Picture an e-card from Apple or Itunes that will ask you to preview the album before downloading. Also, you'd have to know the person in order to send this downloadable mix from iTunes. Name, email, etc. The idea originated because I want to make someone a mixed CD but who really purchased CD's anymore? It would b so much easier if I or anyone had the ability to create a mix iTunes card or gift or e-card to send to someone else.

Regarding color picking and color management - can someone, please test this?

Please take a few seconds to test this and let me know the result.
This is with CS5 but probably the same with older versions:
Create a new document and zoom out so that the canvas is smaller than the window.
Change the Standard Screen Mode color to Custom and choose some color, for example gray that is 60 for each R,G, and B.
You can do that in the Interface page of the Preferences or by right clicking on the empty area of the window that is beyond the image's canvas.
Using the eyedropper tool pick the color of that empty area
Press Alt + Delete to fill the canvas with that color.
Do you see a difference between the canvas and that area.
I see a slight difference when the color management preview is on and no difference when it is off (soft proofing using Monitor RGB)
I have some ideas but it will be great of someone can make a clear conclusion and explanation for this behavior.

Thanks for that confirmation, Chris.
Same thing with my apps, though with effort I suppose the colors for the controls and background COULD be put through the color management system at startup time... Lots more complexity though, and that would kind of diverge with the concept of theme selection, not to mention potentially uncovering bugs in the control implementations... And, if the user has gone out of his way to set everything to a pretty shade of blue, and along comes a color-managed dialog that's gone greenish because that's what those color values REALLY mean, that would likely be reported as a bug just because it's different...
-Noel

Can someone please provide *complete* instructions for taking fullpage screenshots using Developer Toolbar?

Two additional notes:
1. I've found and typed in numerous other examples and absolutely NOTHING has worked. I keep getting "too many arguments" and am thisclose to lighting a torch to Firefox (and also for not providing this information - easily findable - by themselves!). :(
2. Therefore, please make whatever you provide:
a. valid for Firefox 28.0 and (few) previous version(s), and
b. literally broken down into single steps (consisting of ONE action each) so that literally ANYone can follow and EXACTLY duplicate what you are doing. If Grandma can't follow your directions to a perfect result, you're not done! ;)
Many thanks from myself and other frustrated users! :D

UNFORTUNATELY, WHAT YOU'VE SUPPLIED IS MORE OF THE EXACT SAME THING THAT I'VE BEEN SEEING ALL AFTERNOON AND EXACTLY NOTHING LIKE I ASKED FOR, WHICH WAS:
1. TYPE IN FIRST ITEM OF TOTAL COMMAND; YOU WILL THEN SEE X
2. TYPE IN SECOND ITEM OF TOTAL COMMAND; YOU WILL THEN SEE X, ETC.
WHY THIS IS IMPORTANT WILL BECOME SELF-EVIDENT IN FURTHER COMMENTS BELOW....
You can invoke the screenshot command by typing the first letters of the command and press the Tab key to accept the proposed suggestion.
THAT RARELY IF EVER WORKS; I MUST TYPE OUT THE ENTIRE WORD.
https://developer.mozilla.org/Tools
https://developer.mozilla.org/Tools/GCLI
I HAVEN'T YET EXAMINED THESE, BUT MY FEELING IS THAT IT WILL BE MORE OF THE SAME.
Type a space and two hyphens (--) to see the options list and use the Tab key to copy the highlighted entry (fullpage) to the command line.
TAB REALLY DOES ABSOLUTELY NOTHING FOR ME IN THIS CONTEXT.
Note that the fullpage command also has its own options, so you can type the two hyphens another time to see those options.
The default file name is "Screen Shot yyyy-mm-dd at HH.MM.SS.png" in the default Download directory.
See also help screenshot
screenshot --fullpage fullpage_screenshot.png
THE LINE ABOVE IS EXACTLY WHAT DOES NOT WORK.
IF I COPY-PASTE IT IN, A SPACE GETS ADDED. HITTING ENTER RESULTS IN IMAGE 1 (ATTACHED), FOLLOWED BY IMAGE 2 (ATTACHED) WITH ENTER AFTER BACKSPACE TO GET RID OF THE SPACE.
IF I ACTUALLY TYPE IT IN, HITTING ENTER RESULTS IN IMAGE 2.
THE "TRUE" OPTION ALWAYS COMES UP WITH ME UNABLE TO SELECT IT AS SHOWN IN IMAGE 3, LEADING AGAIN TO THE OBSERVED FAILURE MESSAGE IN IMAGE 2.
NOW YOU UNDERSTAND WHY I'M FURIOUS BY NOW! :(
screenshot --fullpage --clipboard true
screenshot --clipboard true --delay 5

Can someone please convert this file into a LabVIEW 8.0 vi?

Hello All! I created this vi using my school's computers. The problem is that the school uses LabVIEW 8.1.2, whereas I use LabVIEW 8.0. Because of this difference, I cannot open this vi. Does anyone have any tips/suggestions that I can use to open this vi?
Thanks.
Message Edited by jl478 on 10-28-2007 01:34 PM
Attachments:
GraphData.vi ‏193 KB

Try this. It was looking for subVI's for DAQmx Base (I don't know what that is or how it's differerent from normal DAQmx). But you should be able to relink those subVI's
Attachments:
GraphData[1].vi ‏200 KB

Can someone please troubleshoot this form for me?

http://quintandquint.com/fileupload/gotit.html
the accompanying php code is as follows:
<?
+----------------------------------------------------------------------+
// | inPHormer form parse |
+----------------------------------------------------------------------+
// | Copyright (c) 2002 Shift srl |
// |
http://www.shift.it |
+----------------------------------------------------------------------+
$inPHormer_msg = "name: $name\ncompany: $company\nemail:
$email\nphone: $phone\nfilenames: $filenames\nSubmit: $Submit\n";
$inPHormer_err = "
http://www.quintandquint.com/fileupload/uhoh.html";
$inPHormer_ok = "
http://www.quintandquint.com/fileupload/thanks.html";
$inPHormer_subj = "Feedback of yoursite";
$inPHormer_mailTo = "[email protected]";
$inPHormer_headSend = "From: inPHormer processor\n";
if (!$name || !$company || !$email || !$phone || !$filenames
|| !$Submit) {
header("Location: $inPHormer_err");
exit;
} else {
mail($inPHormer_mailTo, $inPHormer_subj, $inPHormer_msg,
$inPHormer_headSend);
include("$inPHormer_ok");
?>
thanks very much!!

On 22 Feb 2007 in macromedia.dreamweaver, joeq wrote:
> thanks for your reply ? this is the error message that
was returned:
More detail is good.
> Warning: main() [function.main]: URL file-access is
disabled in the
> server configuration in
> /home/quintandquint.com/html/fileupload/gotit.php on
line 19
>
> Warning: main(
http://www.quintandquint.com/fileupload/thanks.html)
> [function.main]: failed to open stream: no suitable
wrapper could be
> found in
/home/quintandquint.com/html/fileupload/gotit.php on line
> 19
>
> Warning: main() [function.include]: Failed opening
> '
http://www.quintandquint.com/fileupload/thanks.html'
for inclusion
> (include_path='.:/usr/share/php4:/usr/share/php') in
> /home/quintandquint.com/html/fileupload/gotit.php on
line 19
I'm guessing that this is line 19?
include("$inPHormer_ok")
$inPHormer_ok = "
http://www.quintandquint.com/fileupload/thanks.html";
include("$inPHormer_ok")
You're trying to include something from an external URI. This
may or
not work, depending on the version of PHP and the server
settings. Try
changing to this:
$inPHormer_ok = "/fileupload/thanks.html";
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Can someone please give me detailed information what to do? My Mac is so slow. Below is the EtreCheck:

EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 1:54:04 PM GMT
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2011) (Verified)
    MacBook Pro - model: MacBookPro8,2
    1 2.4 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
    AMD Radeon HD 6770M - VRAM: 1024 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 2:55:53
Disk Information: ℹ️
    TOSHIBA MK7559GSXF disk0 : (750.16 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 749.30 GB (600.04 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS31N
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
    /etc/hosts - Count: 15
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/AVG AntiVirus.app
    [loaded]    com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) Support
        /Applications/VMware Fusion.app
    [loaded]    com.vmware.kext.vmci (90.4.18) Support
    [loaded]    com.vmware.kext.vmioplug.10.1.24 (10.1.24) Support
    [loaded]    com.vmware.kext.vmnet (0104.03.86) Support
    [loaded]    com.vmware.kext.vmx86 (0104.03.86) Support
    [loaded]    com.vmware.kext.vsockets (90.4.23) Support
        /System/Library/Extensions
    [loaded]    com.eltima.ElmediaPlayer.kext (1.0 - SDK 10.4) Support
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    MobileBrServ: Path: /Library/StartupItems/MobileBrServ
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    StartOuc: Path: /Library/StartupItems/StartOuc
    Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.wdhelper.plist
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.avg.Antivirus.gui.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [running]    com.avg.Antivirus.infosd.plist Support
    [running]    com.avg.Antivirus.services.plist Support
    [running]    com.eltima.ElmediaPlayer.daemon.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.facebook.videochat.[redacted].plist Support
    [loaded]    com.google.keystone.agent.plist Support
User Login Items: ℹ️
    uHD-Agent    UNKNOWN (missing value)
    uHD-Agent    UNKNOWN (missing value)
    iTunesHelper    ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    uTorrent    UNKNOWN (missing value)
    ZipCloud    UNKNOWN (missing value)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Twoo    UNKNOWN (missing value)
    Twoo    UNKNOWN (missing value)
    VMware Fusion Start Menu    Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
Internet Plug-ins: ℹ️
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
    AdobePDFViewerNPAPI: Version: 10.1.12 Support
    AdobePDFViewer: Version: 10.1.12 Support
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    Silverlight: Version: 4.0.60531.0 Support
    JavaAppletPlugin: Version: Java 7 Update 45 Check version
User Internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: Unknown
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
    ResizeMe
    DuckDuckGo
    Searchme
    SlickSavings
    Amazon Shopping Assistant
    Ebay Shopping Assistant
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Flip4Mac WMV Support
    Growl Support
    Perian Support
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    vmware-vmx
         6%    com.apple.quicklook.satellite
         5%    WindowServer
         1%    hidd
         0%    Finder
Top Processes by Memory: ℹ️
    1.09 GB    vmware-vmx
    174 MB    com.apple.WebKit.WebContent
    56 MB    Safari
    52 MB    Finder
    47 MB    AVG
Virtual Memory Information: ℹ️
    34 MB    Free RAM
    683 MB    Active RAM
    650 MB    Inactive RAM
    2.14 GB    Wired RAM
    2.70 GB    Page-ins
    2.40 GB    Page-outs

looks like you have a few start up items that can cause some initial slow down items are in bold
iTunesHelper    ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    uTorrent    UNKNOWN (missing value)
   ZipCloud    UNKNOWN (missing value)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Twoo   UNKNOWN (missing value)
    Twoo    UNKNOWN (missing value)
   VMware Fusion Start Menu    Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
also you have 4gb of RAM, although thats a good amount, 8GB is slowly becoming the new standard so maybe consider upgrading the RAM if you have the money
also you can go to http://www.thesafemac.com/ these guys have great free and simple software and guide that can remove adware and improve your mac
hope this helps

Can Someone Please test a file for me in DW8 on a Mac?

Similar Messages

Maybe you are looking for