Can someone tell me the ratio's for the Neo2's dividers?

I just can't work it out
I know the 133Mhz selection is CPU/14, as thats what I'm running now, but the mem is only at 180Mhz not the full 200Mhz or higher :(

Thanks Ken and J.V. I appreciate it!
j.v. - thanks a bunch, you told me everything I wanted to know!

Similar Messages

Can someone tell me please how to use the features...

Hi all,
Can someone tell me please how to use the features on the HS-47 headset?
That is, what functions does the button control and how many presses of the button for each function, etc?
The headset was as supplied with my 6200.
I've tried looking for a user guide but I don't think there is one.
Many thanks,
Steve.

I think it's pretty basic.
If you are listening to music on your phone, it should automatically mute it when a call comes in. A basic press of the call answer / end button should then do just that.
Have a go! You could try experimenting with a quick double press, that may recall the last number you dialled, but otherwise that's probably it.

Can someone tell me how to continue paying the Photoshop?

Can someone tell me how to continue paying the Photoshop?

I assume you are inquiring about the one year Photoshop CC subscription. Just purchase the subscription again. Creative Cloud pricing and membership plans | Adobe Creative Cloud
For further questions, contact Adobe: Contact Customer Care or 1 (800) 833-6687
Benjamin

Can someone provide a number or email for The USA or The UK support team please?!

Can someone provide a number or email for The USA or The UK support team please?!

I had started my service in February of 2013. February of 2014, I was told that I would be getting my deposit back around May 2014. I was good with that, I added 2 more lines to my plan for that ONE reason, that I was getting it back or credited to my account. Around April 27-28th, not sure of exact date, I spoke to someone in financial services department and I was told that my deposit should be applied around May 7,2014. She then set up a payment arrangement for May 7, for my bill. On May 9, I called and spoke to someone else in financial services, where I was told my deposit got pushed back to August 2014 because of a returned check, which is ACTUALLY A CANCELLED PAYMENT MADE BY ME, because the amount that was scheduled was smaller than the actual amount. The next 2 days I made payments for the GREATER amount. I requested to speak to someone in the treasury department, and was told there is NOT a direct line to them, they can only be contacted by email, which I could NEVER find an email for them or for the corporate office to speak to someone higher up. I called AGAIN this morning to get a number or email and I was given the number to ANOTHER CALL CENTER, and was NOT able to get anything resolved!! I am fed up, and DONE WITH VERIZON WIRELESS. I HAVE ALREADY PLACED AN ORDER WITH ANOTHER CARRIER, AND I AM TERMINATING MY CONTRACT WITH VERIZON. I CAN'T EVEN SPEAK TO SOMEONE IN THE CORPORATE OFFICE, WHICH I BELIEVE IS HORRIBLE CUSTOMER SERVICE!!!! #NOMOREVERIZONWIRELESSPROBLEMS#

Please can someone tell me how to swtch off the auto correct spell check option?

Can someone please explain to me how to turn off the auto spell check option? the one when it auto corrects? thanks! im desperate!

I believe that you turn off that spelling feature in the individual program that you use. Go to the edit menu of the application being used and see if there is a spelling feature listed. If there isn't, it may be that this feature is an integral part of the application and is located in the preferences, and you'll find it there. This would need to be done for each program you want to use that is bothering you with auto spelling correction. I don't believe there's a general setting for autocorrect that works across programs.

Can someone from Sun post license terms for the 1.6.13 version of the JRE?

A section of the 1.6.13 README relating to redistribution of the JRE appears to be out of date. I need an updated version that reflects the new plugin architecture. I'm updating a private JRE but would like to exclude as much as possible to reduce the surface of the static JRE.
Here is the out-of-date section. I'm looking for an updated version ASAP. Thanks!
When redistributing the JRE on Microsoft Windows as a private
application runtime (not accessible by other applications)
with a custom launcher, the following files are also
optional. These are libraries and executables that are used
for Java support in Internet Explorer and Mozilla family browsers;
these files are not needed in a private JRE redistribution.
bin\java.exe
bin\javaw.exe
bin\javaws.exe
bin\javacpl.exe
bin\jucheck.exe
bin\jusched.exe
bin\wsdetect.dll
bin\NPJPI*.dll (The filename changes in every release)
bin\NPJava11.dll
bin\NPJava12.dll
bin\NPJava13.dll
bin\NPJava14.dll
bin\NPJava32.dll
bin\NPOJI610.dll
bin\RegUtils.dll
bin\axbridge.dll
bin\deploy.dll
bin\jpicom.dll
bin\javacpl.cpl
bin\jpiexp.dll
bin\jpinscp.dll
bin\jpioji.dll
bin\jpishare.dll
lib\deploy.jar
lib\plugin.jar
lib\javaws.jar
lib\javaws\messages.properties
lib\javaws\messages_de.properties
lib\javaws\messages_es.properties
lib\javaws\messages_fr.properties
lib\javaws\messages_it.properties
lib\javaws\messages_ja.properties
lib\javaws\messages_ko.properties
lib\javaws\messages_sv.properties
lib\javaws\messages_zh_CN.properties
lib\javaws\messages_zh_HK.properties
lib\javaws\messages_zh_TW.properties
lib\javaws\miniSplash.jpg

Yes, I didn't make that clear (first thing in the morning). Even though the JMF Diagnostic applet doesn't work for me on RedHat 9.0 using the Java Plugin with JDK 1.4.2, JMF DOES work for me from the command line. It seems that the Java 1.4.2 Plugin isn't finding JMF on the path. For me, the Java 1.5 Plugin resolves this issue.
Scott

SORRY TO SEEM SO STUPID BUT CAN SOMEONE TELL ME HOW TO ACTUALLY OPEN THE DISC PLAYER?

This is my first Mac.......please, how hard can it be to find out how to open the disc drive? I found out how to put it in...duh....but not how to actually open it. Help please......not very computer literate, sorry, but I'm trying.

Click on the button with the same symbol as the Eject key at the right edge of the menu bar. If you don't see one, choose Go to Folder from the Finder's Go menu, provide /System/Library/CoreServices/Menu Extras/ as the path, and double-click the Eject.menu item. If this doesn't produce an usable option to eject the drive, you have a slot-loading drive with nothing inside and can just insert a CD or DVD into it.
(104686)

Can someone tell me about encode,decode for http url parameters

All,I got a problem that i want to redirect a url takes some parameters by GET type.if one parameter with url is a passwd field ,i thought it must be encode.And decode by recive-page.what class default in java can i use to encode the field and decode it.Or any solution better.please tell me.thank~

NEVER send a password using a GET - always use a POST. Otherwise, the password will be transmitted in plain text in the GET header.
URLEncode / decode is used to convert non-allowed ASCII characters (i.e. characters not allowed by the specification in parameter names or values) into a hex representation so they can be properly parsed. The receiving end uses URLDecode so the receiver obtains the exact parameters that were sent.
For example, if you wanted to pass a parameter called 'name' a value of 'big joe', you could try doing:
GET Servlets/myServlet?name=big joe
but this would not be valid, because spaces are not allowed in URL parameter lists (although Microsoft IE and IIS incorrectly allow this).
Instead, you should send:
GET Servlets/myServlet?name=big%20joe
The ascii value of a space is 32, which is hex 20 (0x20), thus the %20.
Hope that helps!
- K

Can someone point me to a link for the leanest, meanest apple post flow

thank you in advance
we are looking for finishing funds for our film and i was curious that with all the advances in technology, what is the most efficient workflow - we need to have a D5 master and a film print
or do we?
thanks
craig

I don't know of a link to go to, but I would say don't do either unless you have to.
If you're shopping it and you need to exhibit in digital HD, have you thought about renting an Io HD or something, and running it from a MacBook Pro for screenings? HD video from ProRes HQ QT is sweet. Multichannel audio too. I think I read somewhere online about someone that was doing festivals in HD this way...
Screeners could also be Blu-Ray, or anamorphic SD DVD, depending on what your potential distributor/investor would prefer. You could probably do that yourself. Layback to D5 seems unnecessary, unless that's what your new distributor or post house wants, and film has a cost and print ecosystem all its own.
For theatrical stuff, the post house I work with takes digital files on hard drives anyway. This bypasses a tape step for them (and me) when doing a color pass, converting to DPX, film, etc.
I'm assuming you didn't shoot with RED or something too exotic, so make it easy, do a ProRes HQ version of your project, play with it, get the look you want, export it, exhibit that, or make DVD screeners and pitch those.
Once you're happy you can always change attributes and export to whatever, time base issues aside. Keep your FCP project well organized for later finishing. If possible, I would stay away from expensive output until your movie is locked.

HT1391 Can someone tell me simply how to add the one music choice I bought to an album I am posting on FB?

Can anyone please tell me (simply) how to add music to a FB post? One particular song on itunes I want to buy. Can this be added to my photo album I need to post? My husband's birthday is tomorrow & I lost him 2 yrs. ago. I need help SOON. Thanks.
I have a PC.

There are several threads that address this issue. Apparently there's an option to turn off infrared remotes in Security Preferences - but not for my MacBook Air. Try this thread:
Apple TV remote command macbook pro too!

Can someone tell me how to permanently remove the navigation bar so that a user cannot put it back himself. i do not want users to be able to browse to the local c:\ through this navigtion bar. using firefox 7. thanks

i have locked down a client using policy editor for Windows 7.
and i want to restrict a user to one website only via a firefox shortcut on the desktop and to restrict their access to the local system drive which is currently vulnerable using the navigation bar. i know how to right click and rmeove but the user can put this back himself quiet easily and then browse anywhere on the local machine or web.

Even then it won't work.<br />
If the location bar is hidden then you can use Ctrl+L to bring up a pop-up with a location bar.
You would probably need to run Firefox in a sandbox that doesn't allow access to the local file system to get that working properly.

Can someone tell me how t delete all the automation of a track in version 9

Dear god in heaven.. can someome please tell me how I can simply "Delete all automation of current track" like in version 8??

Track/track automation/delete all automation on selected track.

Please can someone tell me why I am getting this error?

I want to call a method (setSquare()) when a JLabel is clicked by the user, the following code should work:
*private void grid11MouseClicked(java.awt.event.MouseEvent evt) {*
setSquare();
But I get this error, please can someone tell me what this means? The method is already defined in the class and I have imported javax.swing etc
Frame.java:181: setSquare(javax.swing.JLabel) in p1.Frame cannot be applied to ()

drew22299 wrote:
I want to call a method (setSquare()) when a JLabel is clicked by the user, the following code should work:
*private void grid11MouseClicked(java.awt.event.MouseEvent evt) {*
setSquare();
But I get this error, please can someone tell me what this means? The method is already defined in the class and I have imported javax.swing etc
Frame.java:181: setSquare(javax.swing.JLabel) in p1.Frame cannot be applied to ()
As i dont know what that method needs i can't help you there but i do know you cannot leave it blank. Try adding a number/text whatever or null and see what it does. or check the api and take a look what it needs.
Edited by: deAppel on Oct 31, 2007 10:35 PM

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

I bought my little brother an iPod touch 2nd generation for Xmas so we could text since we love states away but it won't verify and complete updating so I can download the texting apps required by iOS 4 or later can someone tell me how to update it please

I bought my little brother an iPod touch 2nd generation for Xmas so we could text since we love states away but it won't verify and complete updating so I can download the texting apps required by iOS 4 or later can someone tell me how to update it please

What exactly happens when you try to update the iPod? What does the error message say?
Also, are you sure yo have a 2G iPod?
See:
Identifying iPod models
I ask since a 1G can only go to iOS 2.x via iTunes and highest is 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Can someone tell me the ratio's for the Neo2's dividers?

Similar Messages

Maybe you are looking for