Can someone translate this vi to LV 5.0?

Can someone translate this vi to LV 5.0?
Thanks
Gorka
Attachments:
Write_Table_and_Chart_to_XL.llb ‏240 KB

Try this one.
Hope it works!
Brian
Attachments:
Write_Table_and_Chart_to_XL50.llb ‏163 KB

Similar Messages

  • Can someone translate this?, Can someone translate this?

    Hello everyone, is there anyone who can make sense of the following information?
    Mon Feb  4 11:57:29 2013
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000001B613018 PC=0x00000000000A9AE4
    Latest crash info for cpu 0:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          previously dumped as "Latest" state. skipping...
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

    I was running BOINC, Safari, and Vuze at the time.  Maybe iTunes too but thats really all I have on the computer right now.  I sprayed the inside with canned air and now one stick of RAM is not reconized.  Here is the full report.
    Sun Feb  3 23:58:01 2013
    panic(cpu 0 caller 0x0001D1D8): ipc_mqueue_receive_results: strange wait_result
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x0001D1D8 0x000A9714
    Proceeding back via exception chain:
       Exception state (sv=0x3868A280)
          PC=0x9000AF48; MSR=0x0000F030; DAR=0x060B4000; DSISR=0x42000000; LR=0x9000AE9C; R1=0xF1E3B360; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Feb  4 00:16:07 2013
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000630F4
    Latest crash info for cpu 0:
       Exception state (sv=0x37D7F780)
          PC=0x000630F4; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x00063064; R1=0x21F03DB0; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00062FDC 0x000A865C 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x37D7F780)
          previously dumped as "Latest" state. skipping...
       Exception state (sv=0x37CA3C80)
          PC=0x9FB068C4; MSR=0x0200F030; DAR=0x0DF75000; DSISR=0x42000000; LR=0x9FB06640; R1=0xBFFF7B50; XCP=0x0000000C (0x300 - Data access)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x37D7F780)
          PC=0x000630F4; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x00063064; R1=0x21F03DB0; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00062FDC 0x000A865C 0x000ABB80
       Exception state (sv=0x37CA3C80)
          PC=0x9FB068C4; MSR=0x0200F030; DAR=0x0DF75000; DSISR=0x42000000; LR=0x9FB06640; R1=0xBFFF7B50; XCP=0x0000000C (0x300 - Data access)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Feb  4 00:28:11 2013
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000008 PC=0x00000000000754C0
    Latest crash info for cpu 0:
       Exception state (sv=0x382D1000)
          PC=0x000754C0; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x00078EBC; R1=0x21F13550; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00000000 0x0028AA98 0x000E8B10 0x00223174 0x00228AB8 0x00228D54
             0x000FBA54 0x000E249C 0x000E2030 0x000EEDF8 0x000EF05C 0x000EF0FC 0x002ABDB8 0x000ABD30
             0x028D3CE0
    Proceeding back via exception chain:
       Exception state (sv=0x382D1000)
          previously dumped as "Latest" state. skipping...
       Exception state (sv=0x37D1FC80)
          PC=0x90005EAC; MSR=0x0200F030; DAR=0x05C05E2D; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE90; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x382D1000)
          PC=0x000754C0; MSR=0x00009030; DAR=0x00000008; DSISR=0x40000000; LR=0x00078EBC; R1=0x21F13550; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00000000 0x0028AA98 0x000E8B10 0x00223174 0x00228AB8 0x00228D54
             0x000FBA54 0x000E249C 0x000E2030 0x000EEDF8 0x000EF05C 0x000EF0FC 0x002ABDB8 0x000ABD30
             0x028D3CE0
       Exception state (sv=0x37D1FC80)
          PC=0x90005EAC; MSR=0x0200F030; DAR=0x05C05E2D; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE90; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Feb  4 11:57:29 2013
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000001B613018 PC=0x00000000000A9AE4
    Latest crash info for cpu 0:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          previously dumped as "Latest" state. skipping...
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Feb  4 13:07:53 2013
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000001B613018 PC=0x00000000000A9AE4
    Latest crash info for cpu 0:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          previously dumped as "Latest" state. skipping...
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x381B9A00)
          PC=0x000A9AE4; MSR=0x00003030; DAR=0x1B613018; DSISR=0x40000000; LR=0x00003820; R1=0xFC14FC27; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
             backtrace terminated - unaligned frame address: 0xFC14FC27
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Thanks!
    (Safari quit while I typed this the first time so I took the opportunity to swap the Sonnet 1.4 for the origional 733.)

  • Can someone translate this HTTPD error?

    This log is from when I start the webserver from server app, I have two virtual host created that should work on port 80 and the default that runs on port 443.
    Aug 25 14:11:52 myserver servermgrd[36879]: servermgr_web: enabling
    Aug 25 14:11:55 myserver com.apple.launchd.peruser.70[37300]: Background: Bug: launchd_core_logic.c:3063 (24984):3
    Aug 25 14:11:55 myserver com.apple.launchd.peruser.70[37300]: Background: job_mig_intran() was confused by PID 37105 UID 70 EUID 70 Mach Port 0x1a07:
    Aug 25 14:11:55 myserver com.apple.launchd.peruser.70[37300]: Bug: launchd_core_logic.c:8528 (24984):3: j != NULL
    Aug 25 14:11:55 myserver org.apache.httpd[37303]: [Thu Aug 25 14:11:55 2011] [warn] NameVirtualHost 83.246.3.34:80 has no VirtualHosts
    Aug 25 14:11:56 myserver servermgrd[36879]: servermgr_web: Disabling port forwarding for port 80
    Aug 25 14:11:57: --- last message repeated 1 time ---
    Aug 25 14:11:57 myserver servermgrd[36879]: servermgr_web: waiting for pid, file /private/var/run/httpd.pid.
    Aug 25 14:11:57 myserver org.apache.httpd[37310]: [Thu Aug 25 14:11:57 2011] [warn] _default_ VirtualHost overlap on port 80, the first has precedence
    Aug 25 14:11:57 myserver org.apache.httpd[37310]: [Thu Aug 25 14:11:57 2011] [warn] _default_ VirtualHost overlap on port 443, the first has precedence
    Aug 25 14:11:57 myserver com.apple.launchd[1] (org.apache.httpd[37310]): Exited with code: 1
    Aug 25 14:11:57 myserver com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
    Aug 25 14:11:58 myserver servermgrd[36879]: servermgr_web: waiting for pid, file /private/var/run/httpd.pid.
    Aug 25 14:12:02: --- last message repeated 3 times ---
    Aug 25 14:12:02 myserver servermgrd[36879]: servermgr_web: Enabling port forwarding for port 80
    Aug 25 14:12:02: --- last message repeated 1 time ---
    Aug 25 14:12:02 myserver servermgrd[36879]: servermgr_web: Cannot confirm Apache was started; missing or invalid pid file
    Aug 25 14:12:07 myserver org.apache.httpd[37321]: [Thu Aug 25 14:12:07 2011] [warn] _default_ VirtualHost overlap on port 80, the first has precedence
    Aug 25 14:12:07 myserver org.apache.httpd[37321]: [Thu Aug 25 14:12:07 2011] [warn] _default_ VirtualHost overlap on port 443, the first has precedence
    Aug 25 14:12:07 myserver com.apple.launchd[1] (org.apache.httpd[37321]): Exited with code: 1
    Aug 25 14:12:07 myserver com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
    Aug 25 14:12:17 myserver org.apache.httpd[37325]: [Thu Aug 25 14:12:17 2011] [warn] _default_ VirtualHost overlap on port 80, the first has precedence
    Aug 25 14:12:17 myserver org.apache.httpd[37325]: [Thu Aug 25 14:12:17 2011] [warn] _default_ VirtualHost overlap on port 443, the first has precedence

    Let's go to end of the universe!! step by step =)
    Aug 25 14:11:55 myserver org.apache.httpd[37303]: [Thu Aug 25 14:11:55 2011] [warn] NameVirtualHost 83.246.3.34:80 has no VirtualHosts
    That means that "below your NamedVirtualHost specification there is no Virtual Host defined"
    VirtualHost are here to allow you to have multiple web pages below the same IP.
    A common Virtual Host definition is:
    NameVirtualHost *
        <VirtualHost *>
        ServerName www.domain.tld
        DocumentRoot /www/domain
        </VirtualHost>
        <VirtualHost *>
        ServerName www.otherdomain.tld
        DocumentRoot /www/otherdomain
        </VirtualHost>
    Following your Log, you have a "NameVirtualHost 83.246.3.34:80" definition without any following "<VirtualHost 83.246.3.34:80>" directive.
    All site's configuration files are in /etc/apache2/sites/
    Aug 25 14:11:57 myserver org.apache.httpd[37310]: [Thu Aug 25 14:11:57 2011] [warn] _default_ VirtualHost overlap on port 80, the first has precedence
    Aug 25 14:11:57 myserver org.apache.httpd[37310]: [Thu Aug 25 14:11:57 2011] [warn] _default_ VirtualHost overlap on port 443, the first has precedence
    That two messages means the same, that "there are two identical VirtualHost definitions, so i'll use the first one"
    That means that you have two "<VirtualHost XXX>" directives with the same or missing "ServerName" definition.
    The Web Server a.k.a. Apache uses the "ServerName" to forward request to one or other definition.
    Let's see an example with this missconfiguration:
    NameVirtualHost 83.246.3.34:80
      <VirtualHost 83.246.3.34:80>
      ServerName www.domain.com
      DocumentRoot /www/domain
      </VirtualHost>
      <VirtualHost 83.246.3.34:80>
      ServerName www.domain.com
      DocumentRoot /www/otherdomain
      </VirtualHost>
    ... when a connection is made to www.domain.com resoults in going to 83.246.3.34 port 80
    Then Apache doesn't know where to go (/www/domain or /www/otherdomain) so it will go to the first definition
    Aug 25 14:11:57 myserver com.apple.launchd[1] (org.apache.httpd[37310]): Exited with code: 1
    Aug 25 14:11:57 myserver com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
    This means "Apache process exit with errors, will try to restart it in 10 sec".
    Note that previous errors should not make Apache process die.
    Aug 25 14:11:58 myserver servermgrd[36879]: servermgr_web: waiting for pid, file /private/var/run/httpd.pid.
    Aug 25 14:12:02 myserver servermgrd[36879]: servermgr_web: Cannot confirm Apache was started; missing or invalid pid file
    The ".pid" file is just a text file with the process number in it (in this case, 36879).
    This file helps other process to kill or restart the Apache's process if needed.
    That say that "no .pid file was created, or invalid file was created, for example an empty one".
    Stop the Web Server and check that the .pid file is not there (/private/var/run/httpd.pid).
    Start the Web Server and check that the .pid file is there and has the propper content.
    You can get the PID (Process ID) for a process performing a "ps" command from the command line:
    #ps aux | grep http
    make the force b with u!

  • Can someone translate this short kernel panic report for me?

    I got this after my internet suddenly went down (Safari stopped loading pages, but my Adium messenger was still working). And then, I think, the internet for my area went down (snow storm) and I'm hoping this kernel panic had something to do with that and not with defective hardware. Here it is below:
    panic.log:
    Description: Panic (system crashes) log
    Size: 851 bytes
    Last Modified: 1/31/07 1:44 AM
    Location: /Library/Logs/panic.log
    Recent Contents: Wed Jan 31 01:44:27 2007
    panic(cpu 0 caller 0x0033096E): fdfree: found fp with UF_RESERVED
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x252c3db8 : 0x128d08 (0x3c9afc 0x252c3ddc 0x131de5 0x0)
    0x252c3df8 : 0x33096e (0x3e79f0 0x4261a90 0x26 0x31f3be)
    0x252c3e38 : 0x337f4e (0x4a4ddac 0x8 0x0 0x352ea000)
    0x252c3ec8 : 0x13b4f4 (0x4a4ddac 0x1 0x252c3ef8 0x199a51)
    0x252c3ef8 : 0x13cd1a (0x39b55d0 0x0 0x252c3f28 0x1a1ec0)
    0x252c3f38 : 0x13cb77 (0x39b55f0 0x39b5348 0x397ecfc 0x397ecb8)
    0x252c3f78 : 0x127406 (0x1 0x398a000 0x1 0x4)
    0x252c3fa8 : 0x1a1e3d (0xffffffff 0x1 0x19ad60 0x3e0f880)
    0x252c3fc8 : 0x19a866 (0x0 0x0 0x10 0x3e0f880) Backtrace terminated-invalid frame pointer 0x252c3f58
    Kernel version:
    Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386

    Hardware test said there was no problem, system information:
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1333 MHz
      Status:          OK
      Manufacturer:          0x06C1
      Part Number:          0x5353413330324730382D45444A3143202020
      Serial Number:          0x000001C5
    BANK 1/DIMM0:
      Size:          2 GB
      Type:          DDR3
      Speed:          1333 MHz
      Status:          OK
      Manufacturer:          0x80CE
      Part Number:          0x4D34373142353637334648302D4348392020
      Serial Number:          0x9450084C
    BANK 0/DIMM1:
      Size:          4 GB
      Type:          DDR3
      Speed:          1333 MHz
      Status:          OK
      Manufacturer:          0x0000
      Part Number:          0x000000000000000000000000000000000000
      Serial Number:          0x00000000
    BANK 1/DIMM1:
      Size:          4 GB
      Type:          DDR3
      Speed:          1333 MHz
      Status:          OK
      Manufacturer:          0x04CB
      Part Number:          0x414437334931433136373445562020202020
      Serial Number:          0x010D0200
    Ram has been like that for about 8 months or so.

  • Can someone translate these broadcast file specs?

    Hi -
    I'm totally confused by these Comcast broadcast specs -  http://vpcinc.net/ftp/RCA/Masons Spots/OMC Encoding Standards.doc
    Over the past years I've made some AE animations (CS5/Mac10.6) that were posted on the web.  Now the question is, "can I do the same for TV?".  But the spec sheet doesn't even mention After Effects!  Suddenly I have to make decisions that I've never made before and I hope  I can get some clear insight from the experienced folks here.
    The spot will contain a short video (7-9 seconds) but the rest of the 30sec will be audio with stills and text.
    If the spec sheet doesn't mention After Effects does that mean I have to use FCP - which IS mentioned?  (How do I make animations in FCP??)
    Let's say, for simplicity sake, I decide to work in SD.  That means that the short video clip should be shot at... what camera settings?  The spec sheet shows 720x486, 720x480 and 720x512.... so do I shoot at 4:3 or 16:9 (or what is NTSC-CCIR 601/DV ??).
    Can someone translate this for me and help me grasp the specs to follow for shooting and outputing this project?
    TIA your patience and input.
    JL

    The SD specs are all 4:3 formats (look at the aspect ratio row). You can shoot in 16x9, but will need to letterbox it. I think Final Cut is mentioned just because its so widely used. And the fact they accept Quicktime & ProRes is important to know (it's arguably the best quality delivery format of the four choices they give you, but will also be the biggest files to upload.)
    Use the AE NTSC D1 or NTSC DV preset and you'll be golden.
    Be sure to render using the DV Render Setting to get correct field rendering. Configure the Output Module to Quicktime movie with ProRes 422. with uncompressed 16bit / 48KHz audio (if there is audio). Tell ProRes it's interlaced footage by clicking the 'Format Option' button, then the 'Codec Option' button in the Output Module settings.
    Or render to an uncompressed format and use another media encoder. (iFFMPEG is my favorite for MPEG-2, Handbrake for h.264)

  • Multithreading - Can someone explain this ...

    Hi Java Gurus:
    Can someone explain this to me why my multithreading worked in once case and not in the other.
    First a little background:
    My application lets the user create multiple JInternalFrames. Each frame has an OK button. When the user presses the OK button, the frame goes about it's business in a new thread, thus returning control to the use, so he/she can press the OK button on the second frame .. and so on.
    Following is the event handler for the OK button that creates the new thread:
    case1 - doesn't work:
          btnTranslate.addActionListener(
             new ActionListener() {
                public void actionPerformed( ActionEvent e ) {
                             txtOutput.setText("");
                             txtBadParts.setText("");
                   Translation trans = new Translation(inst);
                   trans.run();
          );case2 - works:
          btnTranslate.addActionListener(
             new ActionListener() {
                public void actionPerformed( ActionEvent e ) {
                             txtOutput.setText("");
                             txtBadParts.setText("");
                       new Translation(inst).start();
          );Thanks,
    Kamran

    Calling the run method makes the run method run in the current thread. You need to call the start method to get the thread to start its own thread.

  • I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

    I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

    Contact App Store support. They're the folks who can help with Account issues.
    Regards
    TD

  • Hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!

    hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!

                     Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Can someone perform this speaker test for me please

    Hi can someone perform this test for please, play some ipod music through your phone and and cover 1 speaker at a time with you finger, does 1 block out the music as if one speaker is much louder than the other ? just I have tried this on my new iphone 4 as thought it might be a problem but my 3GS is doing it to ??, is it fault or meant to be like that

    There's only one speaker.
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

  • How can I translate this from PL/SQL into embedded SQL!?

    CURSOR TEMP1 is
    SELECT emp.fname fname, emp.lname lname, emp.ssn, dname,emp.salary salary, emp1.fname supervisor_fname, emp1.minit supervisor_mdlname,emp1.lname supervisor_lname FROM employee emp, employee emp1,department d
    WHERE emp.superssn=emp1.ssn(+) and emp.dno=dnumber order by ssn;
    PNTR_TEMP1 TEMP1%ROWTYPE;
    --calcualting values for the cursor TEMP1
    for PNTR_TEMP1 in TEMP1 loop
    fname:= PNTR_TEMP1.fname;
    lname:= PNTR_TEMP1.lname;
    ssn := PNTR_TEMP1.ssn;
    dname:=PNTR_TEMP1.dname;
    sup_name:=PNTR_TEMP1.supervisor_fname||' '|| PNTR_TEMP1.supervisor_mdlname||' '||PNTR_TEMP1.supervisor_lname;
    salary := PNTR_TEMP1.salary;
    n_deps:=0 ;
    /* how can I translate this to embedded SQL...I'm using C++*/

    Hi,
    you can follow this link to use cursor in Pro*c /C++
    http://www.csee.umbc.edu/help/oracle8/server.815/a68022/sql.htm
    Regards

  • Can someone execute this program?

    Can someone execute this program for me and tell me if it works correctly? My DOS is acting funny.
    look for these things:
    - accepts input from keyboard and places them into an array
    - continues to accept names until a blank name is entered
    - array can contain up to 15 names
    - after all names are entered, it displays the contents of the array
    and writes them to a file
    - output should be in 2 columns
    if you see a problem, please tell me how to fix it.
    import java.io.*;
    * the purpose of this program is to read data from the keyboard
    * and put it into a sequential file for processing by ReadFile
    * @author Maya Crawford
    public class Lab0
    * this function will prompt and receive data from the keyboard
    * @return String containing the data read from the keyboard
    * @param BufferedReader that is connected to System.in
    */ (keyboard)
    public static String getData(BufferedReader infile)
    throws IOException
    System.out.println("enter a name");
    return infile.readLine();
    * this is the main program which will read from the keyboard and
    * display the given input onto the screen and also write the data
    * to a file
    * @param Array of Strings (not used in this program)
    public static void main(String[] args)
    throws IOException
    int i;
    String[] outString = new String[16];
    DataOutputStream output=null;
    // this code assigns the standard input to a datastream
    BufferedReader input= new BufferedReader(new InputStreamReader(System.in));
    // this code opens the output file...
    try
    output= new DataOutputStream(new FileOutputStream("javaapp.dat"));
    // handle any open errors
    catch (IOException e)
    System.err.println("Error in opening output file\n"
    + e.toString());
    System.exit(1);
    // priming read......
    for(i=0;i<outString.length;i++)
    outString=getData(input);
    // this is the loop to continue while nnonblank data is entered
    while (!outString.equals(""))
    for(i=0;i<outString.length;i++)
    outString[i]=getData(input);
    outString[i] = input.readLine();
    System.out.println("Name entered was:"+ outString[i]);
    output.writeBytes(outString[i]+"\r\n");
    int rcol=(outString.length+1)/2;
    for(i=0;i<(outString.length)/2;i++)
    System.out.println(outString[i]+"\t"+outString[rcol++]);
    // flush buffers and close file...
    try
    output.flush();
    output.close();
    catch (IOException e)
    System.err.println("Error in closing output file\n"
    + e.toString());
    // say goodnight Gracie...
    System.out.println("all done");

    Ok, here is what I came up with. I commented most of what I changed and gave a reason for changing it. My changes aren't perfect and it still needs to be tweeked. When you run the program you have to hit the enter key every time once before you type a name. When you are done typing names hit the enter key twice and it will output the names entered into the array. Like I said, it isn't perfect, and that part you will need to fix.
    import java.io.*;
    * the purpose of this program is to read data from the keyboard
    * and put it into a sequential file for processing by ReadFile
    * @author Maya Crawford
    public class Lab0
         * this function will prompt and receive data from the keyboard
         * @return String containing the data read from the keyboard
         * @param BufferedReader that is connected to System.in
         */ //(keyboard)
         //On the above line where you have (keyboard), it wasn't commented out in your
         //program and it was throwing a error.
         public static String getData(BufferedReader infile)
         throws IOException
              System.out.println("enter a name");
              return infile.readLine();
         * this is the main program which will read from the keyboard and
         * display the given input onto the screen and also write the data
         * to a file
         * @param Array of Strings (not used in this program)
         public static void main(String[] args)
         throws IOException
              int i;
              String testString; // Created to hold the string entered by the user, because your
                                 // outString array wasn't working for that.
              String[] outString = new String[16];
              DataOutputStream output=null;
              // this code assigns the standard input to a datastream
              BufferedReader input= new BufferedReader(new InputStreamReader(System.in));
              // this code opens the output file...
              try
                   output= new DataOutputStream(new FileOutputStream("javaapp.dat"));
              // handle any open errors
              catch (IOException e)
                   System.err.println("Error in opening output file\n"
                   + e.toString());
                   System.exit(1);
              // priming read......
              testString = " ";  // Initialize testString
              int placeMark = 0; // to input the String entered by the user into the outString
                                 // array, it needs to know which position to enter it into.
              while (!testString.equals(""))
                   testString=getData(input);
                   testString = input.readLine();
                   System.out.println("Name entered was:"+ testString);
                   // Put the testString into the outString[] array.
                   // A lot of the time when you used outString you forgot to use the [x] to indicate
                   // which position you wanted to access.
                   outString[placeMark] = testString;
                   output.writeBytes(testString+"\r\n");
                   placeMark++;
            // Created a do/while loop to display the list of outString.
              int nextEntry = 0;
              do
                   System.out.println(outString[nextEntry]);
                   nextEntry++;
              }while(!outString[nextEntry].equals(""));
              // flush buffers and close file...
              try
                   output.flush();
                   output.close();
              catch (IOException e)
                   System.err.println("Error in closing output file\n"
                   + e.toString());
              // say goodnight Gracie...
              System.out.println("all done");
    }

  • Can someone awnser this question please

    '\ my sound card and my tv is digital but my stereo surround system is analogue but my question is.
    how well to the analogue to digital converts work which i can buy for 40 quid.
    will it give me the same quality digital to digital if im using analogue to digital.
    any help will be much apreciated

    +Re: can someone awnser this question pleased
    deebs986 wrote:
    my sound card and my tv is digital but my stereo surround system is analogue but my question is.
    how well to the analogue to digital converts work which i can buy for 40 quid.
    will it give me the same quality digital to digital if im using analogue to digital.
    any help will be much apreciated
    Depends on
    the analog part of A/D Converter and the converter as well ... there are cheap ones which (if you're audiophile)? may give weak results but normally, those are suitable even being that cheap ... you name ones you have in mind to get more exact answers<
    the source ... D to D is : (lossless (theory))? , A to D (lossy (why, ... read above))<
    jutapa
    @9.56.77.37

  • I am not able to download any  app on my ipad mini , it shows its loading, but never getting downloaded , can someone fix this for me ???

    i have a ipad mini , ios version 8.3 .... i am not able to download any app currently on my ipad.... i am not able to figure out the problem , it shows the app is loading in app store , but its never getting downloaded....how do i fix this problem ??? can someone please figure it out ???

    Welcome to the Apple Community.
    When your account becomes disabled, Apple provides the following recommendation:
    "This message means that someone tried and failed to sign in to your account multiple times. The Apple ID system disables the account to prevent unauthorized people from gaining access to your information. You need to reset your password, following the instructions at the Apple ID website".
    Visit iForgot.com and follow the instructions there.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
    If that doesn't help you might try contacting Apple through iTunes Store Support

  • Trying to understand RSTP - Please can someone explain this?

    Hi Group
    I am still confused about how RSTP is implemented. From what i understand the major difference is that STP
    used Timers for Loop prevention whereas RSTP coordinates between neighbors via messages (proposal/aggreement) to turn on links
    more quickly after topology changes and is "timer free".
    However, I have not noticed any difference in the configuration from the legacy STP
    configurations and the RSTP configuration on cisco devices. Or are there any differences??
    I have read in documentation that RSTP natively includes features like UplinkFast, BackboneFast and PortFast. So are these features now obsolete
    and not needed to be configured if you are running RSTP. (Although i have seen Portfast still configured along with RSTP on many switches)
    Also can someone explain the below Points from Cisco Documentation
    1) should STP be disabled on edge ports all together as suggested below?
    "STP edge ports are bridge ports that do not need STP enabled, where loop protection is not needed out
    of that port or an STP neighbor does not exist out of that port. For RSTP, it is important to disable STP
    on edge ports, which are typically front-side Ethernet ports, using the command bridge
    bridge-group-number spanning-disabled on the appropriate interface. If RSTP is not disabled on edge
    ports, convergence times will be excessive for packets traversing those ports."
    2) It seems RSTP relies on duplex setting to determine inter-switch links. What is the configuration to explicitly
    configure RSTP link types? (I couldnt find this in the documentation)
    "RSTP can only achieve rapid transition to the forwarding state on edge ports and on point-to-point links.
    The link type is automatically derived from the duplex mode of a port. A port that operates in fullduplex
    is assumed to be point-to-point, while a half-duplex port is considered as a shared port by
    default. This automatic link type setting can be overridden by explicit configuration. In switched
    networks today, most links operate in full-duplex mode and are treated as point-to-point links by RSTP.
    This makes them candidates for rapid transition to the forwarding state."
    Also i am a bit rough on my RSTP knowledge even after skimming a few Cisco documents. Can someone please explain this in simple way.
    Thanks in advance

    to configure it on a device:-
    spanning-tree mode rapid-pvst
    PortFast/UplinkFast & BackboneFast were cisco "Enhancements" to 802.1d STP. RSTP just incorperates them. If you want to configure portfast, the command is still "spanning-tree portfast"
    OK
    1) That is your choice - I have bitter experiance of users/IT admins just plugging hubs/switches in when ever they can. Also cabling the switch back to itself creating a cabled loop. So my advice to you is to leave STP enabled on all switch ports, BUT enable BPDUGuard - this is a life saver, if you have configured portfast.
    2) duplex auto! or duplex full (overiding)
    I really suggest that you read the 802.1d standard, once you understand normal spanning-tree - RSTP will come to you.
    http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html
    http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol
    HTH>

  • Can anybody translate this one-line Visual Basic into AppleScript?

    I have been pulling my hair out in trying to get InDesign CS4 to markup selected text with an XML tag. Supposedly this can be done using Visual Basic. Is there anybody out there that could possibly translate this seemingly simply code into AppleScript?
    myText.AssociatedXMLElements.Item(1).XMLElements.Add("break", myText)
    Here is another example:
    With myTSRangeText.AssociatedXMLElements.Item(1).Parent.XMLElements.Add("znak")&#8232;  Call .Markup(myTSRangeText)&#8232;End With
    I am still thinking that AS cannot do this… but it is worth a shot to ask.
    Thanks in advance,
    Jeff

    If it makes any difference
    This is what I have so far using AppleScript. It is very very close. But the result of running the script appends the tagged text to the end of the text in the frame. In other words, it looks like this: (assuming I had the characters "word" highlighted). This is because I can only seem to tell the story to markup using the tag. I cannot tell the selection to markup using the tag?
    This word is the item I want to tag.[word]
    I am wanting the result to tag the selected item. So it should look like this:
    This [word] is the item I want to tag.
    tell application "Adobe InDesign CS4"
        tell document 1
            set selText to object reference of (text from character 1 to character -1) of selection
            set selTextString to selText as string
            display dialog selText as string
            set parentStoryID to parent story of selection
            set myXMLTag to (get XML tag "theDate")
            set myXMLStoryTag to (get XML tag "Story")
            tell XML element 1
                set theStoryElement to make XML element with properties {markup tag:"Story"}
                tell theStoryElement
                    set myXMLElement to make XML element with properties {markup tag:"theDate", contents:selTextString}
                    tell parentStoryID to markup using theStoryElement
                end tell
            end tell
        end tell
    end tell

Maybe you are looking for

  • Bex report to report interface dynamically based on Value in the query

    Hi, Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query? For example my query has the below data Plant | KPI | Quantity P1 | A | 20.00 P2 | B | 25.00 When the user selects KPI A I

  • Cart problem: "We apologize. We are experiencing a technical problem."

    1. I have cleared my cache.2. The problem persists whether I am logged in or adding to cart as a guest.3. I am not using the best buy app.4. The problem persists whether I use my normal browser, Chrome, or switch to Firefox. None of the solutions in

  • Carbon and POSIX error codes

    Hi, Where can I find Carbon and POSIX error codes and their explanation? I'm specifically researching POSIX error 102 and Carbon error -1401 Thanks

  • Merge columns in an ALV Table

    Hi colleagues, is it possible to merge two or more columns in ALV Table (like ColSpan in the Matrix-Layout) to write a text over more than one column? I haven't found any solution for it until now. Best regards Stefan

  • Newbie with 2 problems

    Hi, I'm a newbie on DVDSP 3 trying to use stills for a project. There's one issue regarding this that I can't solve: I am trying to make the menu (background) go from black (a black image or DVDSP's option for black frames) via a slow dissolve transi