Can someone walk me through download and installation process for Production Premium CS6 Windows? After Downloading I have no idea what I should do, tried everything!
Once the download is finished and it is in the C:Users/name/downloads section of my hardrive under a folder labeled "Package" What should I do with this file? It contains mainly zip files that I am unable to extract and cannot open for various reasons. Extraction is imppossible because it says there is not enough space on my hard drive and requires an additional 5.99 PB of space... I have 479GB of free space. How is this not enough???
May be there is not enough space in C drive. Try to extract to a different location.
Or it could be an issue with your harddrive controller. Check your dvice manager and install the correct drivers.
Similar Messages
-
Opening my lightroom 5.. I get a message that Lightroom encountered an error when reading its preview Cacge and needs to quit.
Can someone walk me through the steps. Im dealing with MAC computerGo to the folder containing your catalog and delete the folder with the extension .lrdata. Then start Lightroom, and it will begin creating a new cache file.
If you need to know where the files are: Preference and other file locations in Lightroom 5 -
A family member gave our kids their old iphone with music already loaded for them. How do we add the music to our library? It won't transfer purchases from the phone and if I sync it, the music is erased. Can someone walk me through this?
No one here will help you violate iTunes terms of service or steal music.
-
My logic board failed, and I need to buy an external hard drive. Can someone walk me through the process of doing this? Will the Genius Bar do it for free?
Also, I have a borrowed Mac right now. If I put the new hard drive on this computer will it erase the computer's current hard drive? Do I have to put the hard drive on another Mac?
Any help is greatly appreciated!if your logic board failed then connecting an ext. drive will be non productive.
if you take your hdd out of the failed mac and replace it into the borrowed mac you can then extract everything from that hdd. simply connect the external hdd, go into time machine preferences select your new ext. drive as the destination.
the external drive has to be formatted to mac os extended journaled. however you can purchase ext. drives already formatted for mac.
if you are having the logic board replaced then just put the old hdd back in, it will boot up normally.
you can rest easy knowing that if anything goes wrong, you have the ability to use your fresh backup to produce the same operating environment that you were using before things went wrong. -
Can someone walk me through a step by step process to boot camp OS X 10.9.2 to install Windows 7 (I have the physical disk for Windows 7)?
I've been reading many forums and watching tutorial videos but still very confused as to what to do...I'm afraid to mess things up.
Thanks!Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp 5.1- Frequently asked questions
Boot Camp Help- Overview of Boot Camp setup
10.8 Boot Camp Manual -
I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?
The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6. If you use MCX it will automatically pick the new catalog – however if doing it manually the following URLs need to be used for whichever client version is in question:
Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
To double check this applied you can run the following command:
/usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
to see what settings are for the computer and user appropriately.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
MCX
Another alternative is to use Workgroup Manager to manage the preferences via MCX from your server. This can be done for users, or for computers if they are bound to your Open Directory.
If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
Manually:
Choose the accounts, computers, or groups to have the preference applied to.
Click on Preferences, and then the Details tab
Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
Press Edit…
Under Often, add a New Key and enter the name CatalogURL
Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
Press Apply Now, then Done. Once users/computers have refreshed their MCX settings (usually the next login or restart) the new settings will take over.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
In order to have a system-wide configuration one has to run the following:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
Happily used and tested on my network
The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN will automatically pull the updates from the local repository at high speed without any configuration.
Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
Tags: automaticupdates mac clients macosx setting as default software update
Category: Serverfault
Share
0
0
Google +
0
0
0
5
You might also like:
Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
Iphone 4 Not Charging After Update To IOS6
IPad 2 Not Updating To IOS 5.1
How To Resolve The â€âunable To Install Update†Error For OTA IOS Updates?
What Is â€âSoftware Update†Doing When It Says â€âChecking For New Softwareâ€?
Advertisement
Comment
- See more at: http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf -
Does Roaming data syncs for the first time when app data are in download and installation process?
Hi,
I will store user Id in "HighPriority" Roaming data. When user will install app in another computer (with the same Microsoft Account), app will get user Id from Roaming data. Then I can implement all data sync over my cloud service.
There are 2 scenarios:
1. User downloads and installs app in another computer, but roaming data syncs/downloads for the first time only after several minutes -
It's bad for my app :(
2. User downloads and installs app in another computer and roaming data syncs/downloads at the same time (then I can get user Id immediately)
- Its great for my app :)
Which scenario is real in practice?
Does Roaming data syncs for the first time when app data are in download and installation process?Umm no not that i remember. It just randomly started happening. I reformatted the hard drive for mac (journaled) but it was working fine since i did it until now
-
tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help
are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>? -
Pages created a random password for my document on my iPad. I have no idea what it is and I can't open my document. HELP!!!
How old is your son?
Under the Spanner in Pages there is Set Password where you create a password with hint. You really have to deliberately dig this out to do it.
Do you get a hint when you are asked for the password?
The Password is very secure, if you can't remember what it is, you will have to recreate the document.
Peter -
I am trying to download a trial month of adobe muse and it is asking me to open an application. I have no idea what sort of application I should be opening.
Hi,
To download the latest version of Muse, you must install Adobe application first and install it. Use this application to download Muse,
Get Adobe Creative Cloud Desktop App & Adobe Application Manager
If you still have any question, please let me know. -
My brand new iPad mini won't rotate done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested such as off/on, reset, reboot, double checked lock off. It did work and I changed wallpaper and stopped motion, not sure if this related
Reset all settings. Settings>General>Reset>Reset All Settings. Your iPad will reboot on its own. You will have to enter all of the device settings again, but no data will be lost.
I eould not spend a whole lot more time trying to fix this, if the device is really brand new. I would take it back to where you bought it, bring the box, the charger, the cable and your receipt and if they can't get it fixed, return it and get another one. -
hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise it anyone have an idea what I should do?
If you are trying to configure the AirPort Express using wireless, you must first log on to the wireless signal that the Express is broadcasting to establish a connection.
Look for a wireless network with a name like Apple Network xxxxxx where the "x" could be a number or letter. No password is required to log on.
Most folks find it easier to temporarily connect using an Ethernet able as stic suggests in his post....if you have one handy. Once the device is configured, you can disconnect the Ethernet cable. -
i have never set up security questions and Itunes is asking me to answer security questions. I have no idea what the answers to the questions it is asking me. Now I cannot purchase anything from Itunes. I have had my account for years. What do I do ?
Dude same here
-
My Acrobat suddenly doesn't open. It asks if it can, then I click yes, I see the circle for a few seconds, then nothing. Anyone have any ideas?
I tried removing then redownloading, still the same.
Any help would be appreciated.Hi,
Do you also have any CS6 products installed along with Acrobat XI Pro?
Regards,
Anand
Maybe you are looking for
-
How to transfer notes from iphone 3Gs to 4s
How do you transfer notes from 3Gs to 4s
-
Hi, In my JTable, one of the column uses checkbox as cell editor. I like to know how to get the row index of the row where the clicked checkbox is in. Thanks Stephen
-
OBIEE 11g OPMNCTL not starting
Hi All, When I'm trying to start my OBIEE services, all the services are starting, but the OPMNCTL status is not starting. When I'm trying to start it manually, It is giving me the below error message. Cannot resolve My-PC for instance any opmnctl St
-
Error when publishing 3D to GIF
Symptoms: When the scene contains any 3D rotated object, it doesn't render correctly when publishing to GIF format. Version: Flash CS4 Steps to reproduce: 1- Create a new empty AS3.0 scene. Set the publish settings to generate a GI
-
Hi Team There is a business requirement to install pre configured client of SAP (ECC) for US region So requesting you to guide me where can I get the transport request for pre configured client Regards Gopal Gangane