Can SRM 5.0, ECC 6.0, Netweaver 2004S upgrade to SAP Basis 7.1/kernel 710?

Hi guys,
For IPv6 support, based on note 1346768,
===================================
o You use AS ABAP with a SAP Kernel 7.10 and at least patch level
150 or a SAP Kernel of Version 7.11 or 7.20.
====================================
How can the SRM/ECC/Netweaver products use IPv6? As far as I know, version 7.1 has not been released for these products yet. Can we upgrade the SAP Basis support pack only to 7.1?
Thanks!

Hi,
You already gave yourself the answer : "version 7.1 has not been released for these products yet".
So it means that IPV6 support is not yet possible for SRM 5.0 and ECC 6.0.
You have to wait for SAP and most probably you will have to do a full upgrade of the product and not only of Netweaver.
Regards,
Olivier

Similar Messages

NetWeaver 2004 Installation without SAP R/3 System

Hi,
Can we install Netweaver 2004 without installing the SAP R/3 System ? If so , where can we get that software as trail version and how long will it work ? Does it contains WAS and J2EE Engine ? Can I Configure NWDS with this WAS and J2EE ?
Can u please guide me ?
Thanks,
Suresh..

sure,you can only install the nw platform without r/3 erp import;you can download it from sap servervice marketplace,without license ,you can use it 30days

NetWeaver 2004s upgradation problems

Hi All
Recently we done a upgradation to NetWeaver 2004s but I am having lot of issues here.
major issues are
1)Dropdowns are net getting data from backend(JCO's and sld working fine)
2)java.lang.ClassNotFoundException: com.sapportals.portal.prt.registry.PortalRegistryFactory Found in negative cache com.sap.tc.styles.StyleSheetLinkException
at com.sap.tc.styles.LAFServiceProxy.invokeMethodOnLafService(LAFServiceProxy.java:51)
at com.sap.tc.styles.LAFServiceProxy.getRelativeThemePartURL(LAFServiceProxy.java:32)
at com.sap.tc.styles.StyleSheetLinkProvider.getStyleSheetLink(StyleSheetLinkProvider.java:156)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.laf.LookAndFeelService.getPortalDefinedTheme(LookAndFeelService.java:244)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.laf.LookAndFeelService.getStyleSheetURLs(LookAndFeelService.java:119)
at com.sap.tc.webdynpro.services.sal.laf.core.LookAndFeelServiceInternal.getStyleSheetURLs(LookAndFeelServiceInternal.java:48)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillStaticTemplateContext(HtmlClient.java:547)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse(HtmlClient.java:1200)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.retrieveData(HtmlClient.java:245)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRetrieveData(WindowPhaseModel.java:595)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:156)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:661)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:229)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
My Third Issue is
3)java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.task.ITask.getWebContextAdapter()Lcom/sap/tc/webdynpro/services/sal/adapter/core/IWebContextAdapter;
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:932)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:176)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
at com.wy.easb.services.navigation.integrator.CoIntegrator.wdDoInit(CoIntegrator.java:137)
at com.wy.easb.services.navigation.integrator.wdp.InternalCoIntegrator.wdDoInit(InternalCoIntegrator.java:122)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:661)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:229)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
If any one have proper doccumentation for upgradation please let me know
Note:Good answers are always awarded
Regards
Keerthi

Hi,
what version of 2004s are you using?
I had problems with web dynpros in our upgrade last year.
We had to :
Reimport the old EP6 portal theme. After the upgrade, all web dynpros in our portal were corrupted.
Install patch level/hotfixes for 2004s web dynpros sp8. Our portal was crashing with some web dynpro.
Maybe you have some problem with portal cache. I know that some problems were fixed in sp9 or more for the cache.
Brad

BW Netweaver 2004 upgrade and mySAP ERP

What makes the most sense to do the BW 3.5 and BW NetWeaver upgrade before, after or at same time as the mySAP ERP upgrade

I would upgrade before or after because it's not effected to the real data, any thing goes wrong with Cubes and ODS we can reconstruct and load the data from OLTP. Performing before would give you an edge of upgrade to NW.
Key point is to make sure Plug-ins support to the BW version.

SRM-MDM V2.0 on SRM 4.0 Netweaver 2004

Dear Experts, is SRM-MDM Catalog V2.0 supported on SRM 4.0 (SRM Server 5.0) running on Netweaver 2004. The link service.sap.com/ibc-srm -> mySAP SRM-> SRM-MDM Catalog- > master guide only has details for SRM 5.5. Can you please let me know if SRM-MDM is an option for SRM 4.0 (without XI) or only support CCM2.0. Thanks in advance.
Regards
Gabriel

Hi Gabriel,
SRM-MDM 2.0 can be used with SRM 4.0, SRM 4.0 was delivered with SAP CCM this is why you do not see anything in the SRM 4.0 master guide.
There are certain functionalities which will not be avaiable to you using SRM 4.0 however in general, as the catalog application is not integrated with the SRM SERVER it is usable.
Please note that if you do not have SAP XI then you cannot avail of the product master data transfer/contract data transfer and ERP integration will not be possible.
Regards.
Jason

Is Netweaver 2004s downwardly compatable?

Hi,
I am currently planning to install NW2004S to support a CRM 5.0 project. Can you tell me if the new NW2004s components will still support SRM 4.0 and ECC5.0?
Thanks

Hi Andrew,
SAP NetWeaver 2004s is downwardly compatible with other SAP Applications (i.e. mySAP business suite applications) when used in a standalone installation. By standalone, I mean the installation of the SAP NetWeaver usage type as a separate instance.
Examples: A separate Portal instance connected to a mySAP SRM 4.0 could be upgrading to SAP NetWeaver 2004s without having to upgrade the mySAP SRM 4.0 system.
One thing that you should check before upgrading a SAP NetWeaver instance is whether the 'content' is available for the SAP NetWeaver 2004s release (ex: The business packages are available for the new release).
The 'embedded' SAP NetWeaver capabilities within the applications you mentioned (mySAP SRM 4.0 and mySAP ERP [ECC 5.0]) cannot be upgraded to SAP NetWeaver 2004s independently of the applications - the most obvious example here is the underlying Application server cannot be upgraded to SAP NetWeaver 2004s without upgrading the application to a release that runs of SAP NetWeaver 2004s too.
I hope this answers your questions.
Cheers,
Mike.

Upgarde SAP Netweaver 2004

Hi all,
          Can i Upgrade SAP Netweaver 2004 components to SAP Netweaver 2004s.If not how do i order the SAP Netweaver 2004s package.How do i install CAF in SAP Netweaver 2004.
Plz answer my above Questions ASAP.
Thanks and Regards
Balakrishna s

Yes. Its possible to upgrade to 2004s.
you need to atleast upgrade to corresponding service pack level of 2004s
2004                         2004s
SPS12 and below -
     SPS04
SPS13+14----
             SPS05
SPS15----
                SPS06
SPS16----
                 SPS07
SPS17----
                SPS08
SPS18----
                SPS09
CAF patches are available as add on to your 2004 which u need to install on to WAS.
Hope this answers your questions
regards,
Sujesh
Message was edited by: sujesh kc

NetWeaver 2004s Material

Hi Gurus,
Can any one forward me material ragarding NetWeaver 2004's(BI).

Please see the online help @
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Otherwise, you need access to SAP service marketplace alias "bi", see info under "BI in SAP NetWeaver 2004s".
Best Regards -
Ron Silberstein
SAP
Message was edited by: Ron Silberstein

Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Fariha

hi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal

How to upgrade NetWeaver 2004 to NetWeaver 2004s in order to abtain WD for

Hi Experts:
At the minimize level, How to upgrade NetWeaver 2004 to NetWeaver 2004s in order to abtain the capabilities of Web Dynpro for ABAP ?
FYI: NetWeaver 2004 is run in my server.

hi Guixin,
During Netweaver 2004s upgrade, the upgrade program detects what software is installed on the source release system and maps it to the SAP NetWeaver 2004s usage types. SAPJup then upgrades your system to a
system with the determined usage types.
Please refer to the section '1.2.5.3 Upgrade Paths: Overview' of the Upgrade Master Guide : SAP NetWeaver 2004s to have details about the target release of the usage types which will be mapped to the components installed on the source system.
Netweaver 2004s Upgrade guides are available on SAP Service Marketplace http://service.sap.com/instguidesnw2004s
Hope this information help you in your upgrade tasks

Release dates of nteweaver 2004 and netweaver 2004's and XI 3.0 and PI 7.0

Hi,
i would like to know the information of the following:
release dates of NetWeaver 2004 and NetWeaver 2004's and SAP XI 3.0 and SAP PI 7.0
kalyan.

Kalyan,
NetWeaver 2004 released on April 2004.
source -http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-98954086245278b01-int/-1/articleContainer-1887240879c3b1916e
NetWeaver 2004's released on June 2006.
Source -/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
Best regards,
raj.

SAP Best Practice For Unicode Upgrades - NetWeaver 2004s

Team SAP,
I have a customer that is starting to plan for a Unicode upgrade. The question from the customer is as follows:
What is the SAP Best Practice for Unicode Upgrades? They will be upgrading from a BW 3.5 System to NetWeaver 2004s, and their question is ... should they:
a) Perform the Unicode Upgrade At The Same Time As Their BW 3.5 > NetWeaver 2004s Upgrade, or
b) Perform NetWeaver 2004s Upgrade first, and then at a later date, perform the Unicode Upgrade?
Thank you in advance for any guidance or counsel you may be able to offer.
-M

Hi Michael,
Check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee7407a0-0501-0010-81ae-e329029b1074
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e259990-0201-0010-6085-e7c5aec5af1d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15
Bye
Dinesh

Netweaver 2004s ABAP or JAVA?

I downloaded the 2004s preview with ABAP app server, but noticed two other distributions. One was full Java and the other express Java.
In the Java distributions, is there still an ABAP development environment? Or are the distributions with J2EE using Java instead of ABAP?
Sorry if this question is too "green".
Thanks,
Tim

Hi Smith,
I dont think we have the ABAP development enviornment in the JAVA distributions provided.
The links below will give you fairly a good idea about SAP NetWeaver 2004s:
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
/people/sap.user72/blog/2006/02/11/sap-netweaver-2004s--where-is-it-really-documented
and as i just saw the previous reply to your post which said that the sneak preview is with both java and abap stack.i have a small info for you regarding the same.
SDN recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
for XI we need both the Java and the Abap stack and not just having them individually because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products:
http://www.howforge.com/news/sneap-preview-sap-netweaver-04-sp15-java-abap
I hope I have answered your query.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Solution Manager can't generate installation key for Netweaver 2004s

I am trying to generate installation key for a new installation of
Netweaver 2004s or 7.0 and the Solution Manager only display SAP ECC
5.0 or 6.0 in the field production version, when i am trying do create
a new system landscape. My Solution Manager is 4.0 release and support
package 10. The keys generated by ECC 5.0 or 6.0 doesn't work.

That is because SAP has not released an ECC 7.0
NW2004s is also refered to as 7.0. It appears that you are confusing this with ECC 5.0 and ECC 6.0
A NW2004s installation can contain an ECC5.0 or ECC 6.0, just like it can contain a CRM 5.0 or SRM, or EP, et cetera
The generated keys probably do not work because you have wrong hostname or instance number entered.

Can SRM 5.0, ECC 6.0, Netweaver 2004S upgrade to SAP Basis 7.1/kernel 710?

Similar Messages

Maybe you are looking for