Can SS9 coexist with SS8 on the same box?

Hello,
First off, congratulations on the SS9 release!
I'm about to try it out, but I can't make sense of some what's said in the release notes.
"If you have Forte Developer 6 software, Sun ONE Studio 7 software, Sun ONE Studio 8 software, or Sun Studio 8 software installed, be sure to follow the installation instructions and install the Sun Studio 9 software in a different directory."
The next paragraph says:
"If you have Sun ONE Studio 8, Compiler Collection software or the Sun Studio 8 software installed, be sure to follow the installation instructions and install the Sun Studio 9 software on a different system."
The install guide says:
"If you installed an Early Access version of the Studio 9 software or any other version of the Sun Studio software on your system, then install the current version of the Sun Studio 9 software in a different directory."
So can SS9 coexist with SS8 on the same box, albeit in a different directory, or not? I have an S8 box with SS8 on it.
Regards,
Sergey

I don't have the installation guide handy, but the Release Notes say something different. The Install Guide is wrong about the EA and CA versions. The wording about installing on a different "system" is also wrong. I'll forward this information and see what can be done about correcting it. (No matter how many times a doc is reviewed, it's still wrong ... )
The rules for Sun Studio 9 installation are actually simple, and are the same as for all previous releases:
1. You can install any number of different releases on one system, but each must be installed in a different base directory.
2. You can install only copy of a given release on one system.
The default base directory is /opt, and if any release is installed there, additional releases must be installed somewhere else. For example, you could install Sun Studio 9 in /SS9 or /export/SS9 or any place other than /opt.
Because of #2, you must uninstall an EA or CA version of a release before installing another version of that release. For example, if you install the first EA version, you must uninstall it before installing the second EA version, or CA version or final release version. If you installed the CA version, you must uninstall it before installing the final release version.
Patches to an existing installation don't count as a new version. A patch by definition is installed on top of the release that it patches.

Similar Messages

  • Can I edit with Smart Print the same way I could with Smartweb Printing and then save as PDF files.

    With Vista basic and SmartWeb Printing you had the option to edit your pages and then to save or print them in the PDF format. This way you could customise various pages pages, save them to a file and then reopen the whole file to see if you wanted to make any further changes before printing the final copy.
    sharjor

    Steve M. wrote:
    I installed the full suite of Canon printing, scanning, faxing and whatever else software they provide for this all-in-one.
    Maybe you don't need that. I prefer using Apple's Image Capture for scanning.
    Right now I am working on scanning documents into PDFs. The Canon software lets me create multipage PDFs which is something I've been wanting to do. My question is, is it best to scan images as JPEGs and then save them as a multipage PDF or is it best to scan into PDF directly (which the scanner seems to offer as well) and then save as a multipage PDF? I'm thinking in terms of the best optimization of file size vs. image quality and things like that.
    Let the software do it for you. That will be fewer steps for you. Image-based PDFs are going to be large. There is no way around that. If they are too large, you can use Preview's Save As feature and play around with the Quartz Filter.
    Is the scanner actually doing anything differently when scanning into JPEG vs. PDF? Or is the scanning all the same and it's just the saving of the file that is different?
    Scans are scans. The JPEG file format is lossly and will look worse than other types. If you are scanning in photographs, the JPEGs will look good. If you are scanning in crisp text, JPEGS will have lots of artifacts and look bad.
    In general what dpi setting is usually sufficient to use to scan a basic text document without taking up too much file space?
    I pretty much always keep it at 300 unless I need something special or when the original is really small and I intend to blow it up.

  • Can E-RECRUITING share the same box of ECC?

    I always install E-RECRUITING on a dedicated server as an ABAP application. Then connect to its backend ECC.
    Just curious, can I  install  E-RECRUITING on the same box where its backend ECC system is installed? ECC and E-RECRUITING will have
    different SIDs but co-exist in one Oracle MCOD DB.
    Further more,  can E-RECRUITING and its backend ECC belong to the same SID but on different clients?
    Thanks for help.

    Yes and yes. The first scenario is comparable to I2-A and the second one to I2-B. See the application help for details.

  • TS4020 I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

  • Can you have 2 ipods on the same accounts with different play list?

    Can I have 2 ipods on the same accounts with different plalists?

    Sure.  Each iPod is identified in iTunes with its own name and you configure each one as you wish:

  • How can I make two copies of the same picture one with my watermark and one without for printing for clients?

    how can I make two copies of the same picture one with my watermark and one without for printing for clients?

    Export the photo twice, once with a watermark and once without a watermark.

  • Can you sync two iphones to the same computer but with different itunes account

    i have got an iphone 4 and my brother would like to get one but we are unsure whether we can both sync our phones on the same computer, within him ended up with all my music and photos. is there a simple way round this?

    check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

  • Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

    Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

    No. If you don't have the album you originally used to create the galleries you can do so by dragging the photos from each gallery to a new, empty album. Then when you find the photo sharing site/option you have decided on  you can easily upload each album to the site.
    Another option is to obtain a hosting service and create iWeb photo pages for each album and future albums similar to this photo page in one of my demo sites: iPhoto Book as an iWeb Slideshow.  Or you can use the iWeb album page and have an album for each  iPhoto album on it like on this demo page: Page-7 .
    OT

  • I have the original iPad and when I sync it with my macbook pro in iPhoto the faces are different on both, how can I get them to be the same as on the computer

    I have the original iPad and when I sync it with my macbook pro in iPhoto the faces key photo aren't the same on both devices, how can I get them to be the same as on the computer

    Interesting observation.  Thanks for sharing.
    Did you have a technical support question?

  • Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

    how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

    Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2.  Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button. 

  • I have two IPODs and I want to synchronize with ITUNES in the same computer. How can I do it?

    I have two IPODs and I want to synchronize with ITUNES in the same computer. How can I do it?

    See:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

           how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.  If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

  • How many times can you clean install leopard on the same computer?

    How many times can you clean install leopard on the same computer? Will the leopard dvd run out of installations and not let you install anymore?

    Hi colman Prez;
    Now that the funny comments have been made, I have a serious question and that why are you worry about reinstalling Leopard with an Erase & Install which is what I take that you mean when you say clean install. In actually fact there is no such thing in OS X as a clean install.
    I am curious because in all the years I have used OS X, I have yet to do an Erase & Install yet.
    I know with Windows that they suggest reformatting and reinstalling at the drop of a hat but that isn't true with OS X.
    Allan

  • How can I save multiple titles under the same DVD?

    I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
    Is there a way for me to do this, or am I chasing phantoms?

    *This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
    Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
    If you use versions like this often and wish to have only one master then you can do this with Aperture.
    Regards
    TD

Maybe you are looking for

  • Modify fields on screen with BAdI?

    Hi, I want to modify/customize a screen (Shopping Cart in SRM) in a way that some fields are displayed, others not. Some people told me that this might be possible using a BAdI. As I have never worked with BAdI technology before, I hope that somebody

  • LMS 3.2 Invalid license error.

    Hi there I recently installed LMS3.2 in the setup process it asked me for the *.lic file which I provided. I then installed diffrent updates and patches for LMS. LMS is working int the common services tab. but anything else gives me a error: The lice

  • Can't Set a Passcode

    Pretty simple really. I can't set a passcode on my iPod Touch. I can go into the settings and it'll let me go through the motions to turn the passcode on but it doesn't turn on. What can I do?

  • IPhoto 8.0.2 Upgrade Crashes iPhoto Now !!!

    Hi I used the Software Update to upgrade to iPhoto 8.0.2. Everything went smoothly, except that now when I open iPhoto, after about 20-30 seconds, it hangs.. I have to force quit it every time. I checked Activity Monitor, and the CPU is not being use

  • What is the command key to arrange folders

    I want finder to auto arange my folders by name. I have to constantly go to the menu and click arrange is there a way to set it to do this automatically? Or a command key to do this? Thanks