Can standard program RMCBIN00  calculate cycle count for 2 years?

Hi Experts,
   Can any one clarify my doubt.
           The calculation of cycle counting period to be two (2) years rather than the one (1) year that standard SAP uses. The cycle count indicators that determine the frequency of the counts for each material need to be used in conjunction with the 2 year cycle. Is  standard RMCBIN00 calculate for Two year cycle count??
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Apr 5, 2011 4:14 PM

Hello,
You can do cycle counting with Rf transaction LM59 for the serialised material.
1.My experience says when you have HUM activated then to track material HU & serialisation profile works together.
2.You can do cycle counting of serailised & non serialsed material through Rf gun but clearance of this material will be issue. You may have to create one more transaction to clear the difference of  serialised materials like LI20
Hope this input helps.
Regards,
Prashant

Similar Messages

  • Cycle count for serialized material

    Guys,
    When we do cycle count for serialized items, it pop up to enter serial # when updating the count. Is there any BADI/User exist to skip this step in counting for serialized materials. We dont want to enter serial#, since volume is hugh and serial# is of less important, only count matters.
    Regards
    TGB

    Once you active the series number, then all the material need marked and managed with series number.
    and stock counting need under series number.
    it will cost more time absolutely than no series number.
    if you think the series number not important, you can Deactivate serial number.
    But please note, the reason why you use serial number is to manage the material one by one against the series number.
    NOT just count the quantity.
    Edited by: JiQing Zhao on Apr 19, 2011 9:45 AM

  • Average Maximum Cycle Count for Early 2008 MacBook (Black)

    I have a black early 2008 MacBook that now in its fourth year, and I have noticed that battery health have started to diminish.
    I am wondering what is the maximum battery cycle count for the early 2008 black MacBooks, and if its time to replace it? (I have 250 cycle count, with 78% health remaining)

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • MacBook Pro 2011: Inconsistent cycle count for battery

    hi folks,
    i observed some strange behavior of the cycle count reported by the system.
    when i got the machine the count was at one.
    after loding the system twice the count was already at 6 cycles. (i really attached the power cord only twice and the system got continuous power. once i observed the the cycle counts changed while being on battery).
    did anybody observed that behavior as well?
    thx
    stlei

    The way the cycle count work is by percentage... eg if the computer runs on battery it has a 100% charge when full. If you discharge it 20% consider that 0.2 of a cycle count, these small percentages do add up. Now if you keep your computer plugged in all the time and you are experiencing these weird cycle counts and honestly have kept the adapter plugged in ALL the time, then please try to do a SMC reset (Shutdown the computer and make sure the charger is plugge in. Hold down the left shift key, the left control key and the left option key. Once those are held down press the power button, release the power button then the keys. Wait 5 seconds and boot up the machine.) If you are still having issues please call 1-800-APL-CARE... Apple is investigating strange hardware issues and the engineers would like to take a look at your computer.

  • I installed creative cloud on my computer but now my computer has crashed and i have to buy another one. How do I install the programs again? I paid for one year grtz Emily

    My computer has crashed and i have to buy a new one, how do i put my creative cloud on my new laptop? I paid for a year of having the programs

    Please do not worry. You can just download it from Creative Cloud Help | Install, update, or uninstall apps.
    You have to activate it with your Adobe ID.
    In case the CC has been activated two time, you will have to use the option to deactivate the CC from previous install .This prompt will appear when you will try to activate the CC. Once you choose this option it will allow you to activate the CC on the new machine.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    Regards
    Rajshree

  • Hwo to calculate first week for this year in variable

    The logic is taking today's date and subtracting 7 days.  It uses that date to determine the week which when run today is week one of 2010.but if this is for this year then  jan8 if i deduct 7 wit will comes as jan1 which will be as 1 st week.
    i have to change code such way when this happened it has to show as previous week not current week
    can u guys help me out
    ex: if i run this on jna 8th ..the i get results jan1st ..but the day falls in previous week but its gives me current week... hwo to fix this..? here is the old code
    DATA PREV_WEEK_DT LIKE SY-DATUM.
      PREV_WEEK_DT = SY-DATUM - 7.
      CALL FUNCTION 'Z_DATE_GET_FISC_WEEK'
        EXPORTING
          DATE         = PREV_WEEK_DT
        IMPORTING
          WEEK         = YR_WEEK
        EXCEPTIONS
          DATE_INVALID = 1.
      IF SY-SUBRC <> 0.
        CLEAR YR_WEEK

    wrote logic

  • Can I try e-commerce without paying for a year's subscription?

    Hello. I'm so new to Business Catalyst that I don't even know what questions to ask... Any help would be appreciated!
    I designed a customer's site in Muse, giddy with glee that I can finally, FINALLY handle e-commerce sites. I'd heard that all a person has to do is design the site, upload it to Business Catalyst, install a "module," and viola! Done! Great - I have a Creative Cloud subscription, so I get five sites hosted free. This sounds perfect!
    But... I published my site to BC, and I see no way to install the "module." I fear I may have to purchase an additional plan to get the e-commerce doohicky? I'm not sure I want to pay $420 for a year's access to the e-commerce part just yet - I'd really kinda like my customer's approval on the site first, and he's not gonna do that unless he can see how things will work.
    Is there a way to do a "trial run" with e-commerce before going live and having to pay the $420 a year? I'd really like to see how it all works and give my customer a chance to see a test page before committing that kind of money... Is that possible?

    Hi,
    You can create another account outside muse and instead within BC to test all the features we offer.  Although you cannot add a payment gateway in trial you can still do an offline test transaction to test the experience.
    - https://syd.worldsecuresystems.com/PartnerPortal/FreeTrialSignup.aspx#splash
    Kind regards,
    -Sidney

  • Can we run KSU5 - Assessment Cycle execute for previous periods

    Dear Gurus,
    Can we run KSU5 for previous periods.  Means I have not ran from April 2008 onwards.  Can I run right for all periods.  Any inconsistencies arises for running the KSU5.
    Please guide us.
    Regards
    Srinivas

    Hi Srinivas,
    You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
    Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
    Pls revert back for further assistance...
    Srikanth Munnaluri

  • Can a program a double click event for a button in Flash Catalyst?

    I currently have a button programed in FC with a single click. I would like the exact same behavior to happen whether there is a single or double click on the same button.
    Is there a way to do this in FC? If not can I pull it into another program to edit the code?
    Thank you!
    Sarah

    Thanks for letting me know.
    Unfortunatly it looks like I can't upgrade unless I upgrade my whole suite, which is a bummer. We just spent a small fortune on upgrading everyone from CS3 - SC5. I will have to check with our account rep, but I doubt I can get another software update approved this year. Maybe next.
    Thanks again Chirs!

  • Program to clear (delete) budget for single year

    Hi,
    I need to delete wbs' budget for a single year .
    I implemented Sap note Note 1145955 (Orders, WBS elements: Deleting budget, resetting status) and run program ZDELPRBU to delete the budget, but the program clears the budget of every year. The only selections are: project, wbe, and budget profile.
    How can I delete the budget for year 2010 (or another one)?
    Is there an alternative program which let choose the year?
    Thanks
    Edited by: Stifler on Sep 7, 2010 6:00 PM

    Hi There
    I have done this on Cost centres quite a while back.  What I did was create a plan version and input 1.00 in it.  I then copied the 1.00 version to the one I wanted to delete with 'overwrite' options ticked.
    This may help you.
    Kind regards
    Dawn

  • Sum(sales) count for month year and week

    I have sales table : pord_id number, sale_date date
    my question: a) i need to populate sum of sales for week ie., from today to 7 days example 20-MAY-2007 to 27-MAY-2007
    b) sum of sales for month of MAY this year 2007
    c) sum of sales for 20-MAY-2006 last, only day
    Please help me with this query.. URGENT

    This..?
    sql>select * from sale;
    PROD_ID SALES_DATE
    2  02-MAY-07 
    3  03-MAY-07 
    4  04-MAY-07 
    5  05-MAY-07 
    7  07-MAY-07 
    8  08-MAY-07 
    10  10-MAY-07 
    11  11-MAY-07 
    12  12-MAY-07 
    13  13-MAY-07 
    14  14-MAY-07 
    15  15-MAY-07 
    16  16-MAY-07 
    17  17-MAY-07 
    18  18-MAY-07 
    19  19-MAY-07 
    20  20-MAY-07 
    22  22-MAY-07 
    23  23-MAY-07 
    24  24-MAY-07 
    26  26-MAY-07 
    27  27-MAY-07 
    28  28-MAY-07 
    29  29-MAY-07 
    30  30-MAY-07 
    25 rows selected.
    sql>
    select sum(case  sales_date when trunc(sysdate)  then 1 else 0 end) day_sum,
             sum(case when sales_date between sysdate and sysdate+7 then 1 else 0 end) week_sum,
             sum(case when sales_date between trunc(sysdate,'month') and last_day(sysdate) then 1 else 0 end) month_sum,
            count(*) year_sum
    from sale
    where to_char(sales_date,'yyyy') = to_char(sysdate,'yyyy');
    DAY_SUM WEEK_SUM MONTH_SUM YEAR_SUM 
    1  5  25  25
    Message was edited by:
            jeneesh
    Note: Truncated dates were inserted in the table                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Inbound Idoc function module  for Cycle count with msg type WVINVE

    Can any one tell me which is the standard function Module which processes Cycle count for message type WVINVE.
    My requirement is to setup Inbound Idoc for cycle processing with message type WVINVE.

    Hi Mukesh,
             Inbound FM is IDOC_INPUT_STORE_INVENTORY , and Process code is WVIN.
             Yoou can check this in Tcode WE42 for process code WVIN.
    Regards
    Srikanth M

  • Cycle counting process

    Hi all,
    Could you please some good link/ notes about cycle counting process.
    Sruthi

    Hi, Please go through the following.
    Cycle counting is a method of physical inventory whereby inventory is counted at regular intervals within a fiscal year. These intervals depend on the cycle counting indicator set for the material.
    Cycle Counting allows you to count fast-moving items more frequently than slow-moving items, for example.
    General Procedure
    Mark all materials that are to be included in cycle counting with a cycle counting indicator in the material master record (storage data). The cycle counting indicator is used to group the materials together into various cycle counting categories (for example, A, B, C, and D). In Customizing for Inventory Management, you can define for each category the time intervals at which the materials are to be counted.
    You can use the program ABC Cycle Counting Analysis (RMCBIN00) to perform an analysis. In this analysis, the system assigns the materials to the individual categories according to consumption or requirements. You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.
    For the planning of cycle counting, run the program Create physical inventory documents for cycle counting (RM07ICN1). This program checks all cycle counting materials to determine whether a physical inventory is due to be carried out.
    You can create physical inventory documents for the following stock types, as well as unrestricted-use stock (stock type 1):
    quality inspection stock
    blocked stock
    The system calculates the planned count date for all stock types as folllows:
    Date of last physical inventory of unrestricted-use stock + predefined interval
    If a material needs to be counted, use the program to create a batch input session for creating physical inventory documents. To create the physical inventory documents, process the batch input session .
    When the inventory differences are posted, the actual count date is recorded in the physical inventory data of the material as the date of the last physical inventory.
    Activities
    Marking Materials for Cycle Counting
    This step is only required if you perform cycle counting for the first time or if you want to update the cycle counting indicators.
    In the material master record (storage data), maintain the cycle counting indicator for all the materials that are to be included in cycle counting.
    You can set the indicator in one of the following two ways:
    manually in the material master record. To do this, choose Material ® Change from the Material Master menu.
    automatically using ABC analysis To do this, choose Special procedures ® Cycle counting ® Set CC indicator from the Physical Inventory menu.
    Creating Physical Inventory Documents for Cycle Counting
    From the Physical Inventory menu, select Special procedures ® Cycle counting ® Create physical inventory documents.
    Enter the data required.
    Carry out the evaluation.
    Choose Edit ® Generate session to create the batch input session.
    Select System ® Services ® Batch input ® Edit from the menu to process the session.
    Carry out the physical inventory for the physical inventory documents created.
    Thanks,
    DV

  • Cycle count procedure

    Hi,
    The below is the issue my user asking for.
    there are  B items are to be counted 6 times a year (Once every two months)..
    For example:
    If  plant A has 1000 B items then 500 should be counted in month one and 500 should be counted in month 2.
    However, it seems that all the B movers are in the same month thus the cycle count is for ALL items.
    User asking why all items fall inonr month when he creates phy.inv docs  in MICN.
    Please help.
    Regards,
    amar

    Hi
    Cycle counting is a method of physical inventory whereby material is inventoried at regular intervals within a fiscal year. These intervals or cycles depend on the cycle counting indicator set for the material.  
    Cycle counting allows fast-moving items to be counted more frequently than slow-moving items, for example. 
    All materials to be included in the cycle counting inventory are flagged. This is done either manually, using a cycle counting indicator in the material master record (storage data), or automatically, by means of an ABC analysis. The cycle counting indicator allows you to classify materials into individual cycle counting categories (for example: A, B, C, D) In Customizing, you can set for each category how often the materials are inventoried. 
    You can flag materials that are to be included in cycle counting as follows: 
    Manually in the material master record (storage data)  
    Automatically using ABC analysis. 
          You can use program RMCBIN00 to carry out an ABC analysis, which assigns materials to each category according to consumption or requirements. You can choose whether the analysis should only include materials with cycle counting indicators or all materials. The cycle counting indicator can be automatically updated in ABC analysis. 
    To plan the cycle counting inventories, start the RM07ICN1 cycle counting program at regular intervals. This program checks the due dates for inventories for all cycle counting materials.  
    If it is time for an inventory for a certain material, use the program to create a batch input session to create physical inventory documents. Physical inventory documents are only created for stock type 1 (unrestricted use). The planned inventory count date is calculated as follows: 
            Date of last inventory + pre-defined interval 
    The interval between inventories for each cycle counting indicator is set in Customizing.  
    Use the batch input session to create the physical inventory documents.  
    Now you can carry out the inventory. When the difference is posted, the actual inventory count date is recorded in the material inventory data as the date of the last inventory. 
    Regards
    Ram

  • Cycle count and inventory document generation

    hi.
    Currrent Scenario : Cycle count has been configured for Quarterly cycle count for 20 materials.
    Float period has been set for 5 days.
    Procedure : Customer wants to do inventroy count for the  20 materials at the rate of one material per day.
    Question : 20 Materials falling under "C" quarterly cycle count show up for Physical inventory.
    Can the customer create an inventory document for <b>inventory count each day for each material</b> or will they have to create 20 inventory documents for count at one go since the float period is set for 5days.
    Will the float period indicated play a part if the physical inventory is planned for each material on separate days.
    Or if an physical inventory has been planned for the quarterly managed material, all material in that category say "C" would anyway show up during the quarterly inventory cycle count period.And the inventory count can be done for each material on seperate days.
    Thanks

    hi Arif.,
    Earlier situation : Cycle count procedure was only A.
    Present situation : Cycle count procedure is now ABCD .
    But only C.c indicator A is still active for all material. We have not
    changed the Cc indicators for any material.
    Transported to production on Friday.
    My question is :
    On monday ,when the batch program was executed for printing of inventory
    documents, Why does it generate a whole lot inventory documents for
    Materials which have not been inventored even when the C.c indicators
    remain A for all the Materials.We have not even in-corporated the
    Quarterly cycle count indicators for the few selected materials.
    Should the system:
    1. Print Inventory documents only for the current period or
    2. Is the system behaving properly due to the change in Cycle count?
    Only the Cycle count procedure has been changed to 4 times in a fiscal year.
    Do review the information and update me.

Maybe you are looking for