Can static/dynamic LDAP (not posix) groups be nested?

Does anyone here know whether the LDAP static or dynamic groups (i.e. not simple POSIX groups) can be nested inside of one another? Basically I just want to add groups to groups, but I'm not able to find out if this works (thus far it's not working for me).
Patrick

Groups can be nested. Use the attribute uniquemember in the objectclass groupofuniquenames. uniquemember's value is then the dn of another Group.
Regards,
Ingo

Similar Messages

Dynamic LDAP groups

Hi All,
Weblogic Server 5.1 doesn't support dynamic LDAP groups.
Our experience shows that the same problem is present with WLCS 3.11
Is the problem solved in WS 6 and WLCS 3.5?
Kind Regards,
Panu Harkonen

Hello J.P.,
Note that LDAP realm v2 which is the default realm in WLS 6.1 can only show
group names in the WLS admin console, not the group members (LDAP realm v1,
the same realm in previous versions of WLS servers does show group members
in admin console).
From my understanding of dynamic groups they are still conceptually similar
to a regular group, albeit its members are stored differently. So with this
understanding I don't see why WLS 6.1 LDAP realm wouldn't be able to use
dyanmic groups. You can probably run a quick test yourself to see.
Regards,
BEA WebLogic Support
"Jose Perez" <[email protected]> wrote in message
news:3c838ce2$[email protected]..
>
Hi all,
Does anyone know if weblogic 6.1 supports dynamic LDAP groups?
Thacks in advance,
J.P.

Can not make Groups work in Address Book

I'm running Mac OS X v10.7.4 with the latest version of Address Book. I'm new to Apple and am trying to set up groups in Address Book for ease of mailing to a number of contacts.
I'm connected to iCloud and am able to create group names under iCloud. I can also drag contacts into a group from my iCloud contact list to populate it and the names are displayed on the opposing page from the page listing the group names. However, when I enter the group name into a Mail message address box the box remains blank. Also, if I right click on the group name in the group list and select "Send an e-mail to the group" that will open a "new message" window but again the "to box" will be empty. When I click on a group name and then select from the task bar "Edit>Edit Distribution List..." that choice is grayed out and non-responsive. So I end up with a defined group with group members in it but it can not be edited nor available for actually addressing an e-mail message.
However, this is the weird part: What I described above was my effort yesterday, trying to get Groups going and finally shutting down in frustration. Today when I opened Address Book the groups worked! I could address e-mail messages using either method. The "Edit Distribution List..." was active and I was able to modify my group members. I was so elated that I immediately created another group. Alas, it behaved as the other groups did yesterday. The group was populated but unable to be inserted in the "to box" and I was unable to edit the distribution list. Also, after creating the new group, yesterday's groups would no longer permit being edited although I was able to earlier in the day. However, the addresses still appear in the "to box" when I invoke the group.
I am confused and frustrated. Do I have an incorrect setting that hinders the use of groups? Is there some system reset or iCloud update that occurs on a daily basis that activated the groups created yesterday? Why would my creating a new group cause me to loose the ability to edit any of the groups?
Any help will be greatly appreciated.
Thanks for reading such a long message.
Mike

Eureka. You are right. I just tested closing and reopening Mail and now today's groups work. Regarding editing the existing groups, I found an article from 2011 on CNet that claimed that iCloud disables the Distribution List Editor. The work around is to create a single dummy group under "On My Mac" which will reactivate the editor which can then be used for iCloud groups. I tested this and it works.
Thank you so much for your prompt and helpful comment.
Mike

[svn:fx-4.x] 14699: Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children .

Revision: 14699
Revision: 14699
Author:   [email protected]
Date:     2010-03-11 06:20:06 -0800 (Thu, 11 Mar 2010)
Log Message:
Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children.
QE notes:
Doc notes:
Bugs: FLEXENT-1248, FLEXENT-1250, FLEXENT-1253
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1248
    http://bugs.adobe.com/jira/browse/FLEXENT-1250
    http://bugs.adobe.com/jira/browse/FLEXENT-1253
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/automation/src/mx/automation/delegates/containe rs/ApplicationAutomationImpl.as
    flex/sdk/branches/4.x/frameworks/projects/automation_spark/src/spark/automation/delegates /components/SparkApplicationAutomationImpl.as

Revision: 14699
Revision: 14699
Author:   [email protected]
Date:     2010-03-11 06:20:06 -0800 (Thu, 11 Mar 2010)
Log Message:
Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children.
QE notes:
Doc notes:
Bugs: FLEXENT-1248, FLEXENT-1250, FLEXENT-1253
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1248
    http://bugs.adobe.com/jira/browse/FLEXENT-1250
    http://bugs.adobe.com/jira/browse/FLEXENT-1253
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/automation/src/mx/automation/delegates/containe rs/ApplicationAutomationImpl.as
    flex/sdk/branches/4.x/frameworks/projects/automation_spark/src/spark/automation/delegates /components/SparkApplicationAutomationImpl.as

Is there a way I can make a light not affect every group that is in 3D?

Is there a way I can make a light not affect every group that is in 3-d?

select the group Inspector>Properties>Lighting and switch the shading to off....

Report folder permission can not add group

after upgrade to 11.1.1.2.0 ,when set report folder's permission, in the group list ,can only see "Administors", no other groups created by myself.
how can i add other groups to this list?

You are upgrading from which version to 11.1.1.2.0? Have you ensured that these groups are present in your LDAP?

LC Rights Management End User can not find groups or users during policy creation process

hello,
I'm using LC8.0.1 turnkey install on win2003 box.
Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
I have create a user in the DefaultDom and assigned the following roles:
Live Cycle Rights Management Invite User
Live Cycle Rights Management End User
How can I allow the above created user to search for groups and user during policy creation? Thanks.

Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
Here's an overview of Policy Sets:
http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
Cut and paste the URL.

Mail 6.2 Can I make emails NOT group same senders emails together? Keeping read

Mail 6.2 major issues for business users. Can we make emails NOT group previous emails from the same sender together? (you know it lists all the previous under it). I have a number of customers who send us multiple emails per day. Because of the grouping, there are many times I cant tell what was read or not read. For instance, if I mark an email "Unread" to work on it later, that action just made everyemail in that group "Unread". Now I have the task of going through the last 20 emails and seeing what I printed/read already from that sender. Its contantly double work and confusion. In my office we have 4 of us with imacs all having the exact same issue in mail 6.2. So what gives? There must be a way to stop previous emails from grouping into the most current email from sender. I am grateful for any assistance as google and bing are not giving me anything useful.
Thank you and best regards,
JDM

SOLVED from another wonderful post! I am just sick how easy it was. In the "View" there is a tab called "Organize by Conversation" Simply uncheck this box and BAM its perfect just how we need our email set up as individual emails. Wonderful.

I use groups, how can I delete one in the group for a new note?

When I select a group to send messages to, sometimes I wish to delete one, just for this message, not the group list.
For example, forwarding a message without forwarding it to the one that sent the original

http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List#Avoid_sending_to_an_address_in_a_mailing_list

LDAP Users and Groups

Hi,
<p>
I have configured an LDAP Authenticator for an external LDAP directory in the security realm of the samples portal. User Management is working, but when I try to access the Group Management for the LDAP Authenticator I get the following error:
</p>
<i>com.bea.p13n.usermgmt.hierarchy.TreeNotBuiltException: State: UNINITIALIZED. Tree is uninitialized. Add provider GAAD to list of providers to build. Tree is uninitialized. Add provider GAAD to list of providers to build.
</i>
<p>
It seems that this needs to be setup. How do I do this?
</p>
<p>
Some general notes on LDAP:
</p><p>
I think that in a production environment it is of great value to manage users and groups in a LDAP directory. For instance we have a company directory which contains all users. It seems that users from LDAP can not been added to groups which are in the DB. LDAP also has the advantage of supporting dynamic groups.
As in previous weblogic releases the LDAP authenticator is read only. It would be great if the write functionality could be added as well. Actually managing LDAP users and groups in one place would be a tremendous improvement for us.
</p><p>
Another thing on my wishlist are examples for delegated administration and visitor entitlements. For the sample portal these are empty. But I think it would be nice to have some out of the box examples that show what is possible and help developers and business analysts to understand the concepts and create their own roles.
</p><p>
It would be interesting to read what Bea and other developer think about this.
</p><p>
Kind regards,
<p>
Kai
</p>

Marcus,
Yes, I am using 9.2 TP.
We are already using LDAP for user management with 8.1.
Now, I try to configure 9.2 as well. I am running 9.2 installations on different machines. When I click on Service Administration in the Admin Portal, I get the following error message for each installation:
java.lang.NullPointerException at com.bea.jsptools.serviceadmin.ads.ToolAdServiceBean.cloneFromAdServiceBean(ToolAdServiceBean.java:190) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdContentProviderNodes(ServiceAdminTreeBuilder.java:769) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdServiceBranch(ServiceAdminTreeBuilder.java:746) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.createTreeElement(ServiceAdminTreeBuilder.java:184) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:234) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:235) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildTree(TreeService.java:122) at util.tree.TreeController.constructTree(TreeController.java:142) at util.tree.TreeController.buildTree(TreeController.java:422) at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source) at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source) at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:852) at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:782) at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:456) at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:285) at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336) at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:48) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:1984) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:90) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2055) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:535) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:821) at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:625) at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:156) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414) at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1178)
java.lang.NullPointerException
java.lang.NullPointerException
at com.bea.jsptools.serviceadmin.ads.ToolAdServiceBean.cloneFromAdServiceBean(ToolAdServiceBean.java:190)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdContentProviderNodes(ServiceAdminTreeBuilder.java:769)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdServiceBranch(ServiceAdminTreeBuilder.java:746)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.createTreeElement(ServiceAdminTreeBuilder.java:184)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:234)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:235)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildTree(TreeService.java:122)
at util.tree.TreeController.constructTree(TreeController.java:142)
at util.tree.TreeController.buildTree(TreeController.java:422)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:852)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:782)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:456)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:285)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:48)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:1984)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:90)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2055)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:535)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:821)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:625)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:156)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1178)

Dynamically populate a record group on the fly uisng LOV

Hi,
I want to create dynamically populate a record group on the fly uisng LOV.
1. This is how the RG_BANKNAME Record Group object look like
Object : Record Group
Name : RG_BANKNAME
Record Group Query : SELECT NAME, SHORT_NAME FROM C_BANKS
2. I create the Push Button and when user click it will popup the LOV.
DECLARE
     rg_id RecordGroup;
     errcode NUMBER;
     status BOOLEAN;
BEGIN
     rg_id := Find_Group('RG_BANKNAME');
     IF Id_Null(rg_id) THEN
          Message('No such group: ',ACKNOWLEDGE);
          RAISE Form_Trigger_Failure;
     ELSE
          errcode :=POPULATE_GROUP(rg_id);
          SET_LOV_PROPERTY('LV_NAME', TITLE, 'My Own LOV');
          SET_LOV_PROPERTY('LV_NAME', GROUP_NAME, rg_id);
          SET_LOV_COLUMN_PROPERTY('LV_NAME', 1 ,Title, 'NAME');
          SET_LOV_COLUMN_PROPERTY('LV_NAME', 1 ,Width, 150);
          SET_LOV_COLUMN_PROPERTY('LV_NAME', 2 ,Title, 'SHORT NAME');
          SET_LOV_COLUMN_PROPERTY('LV_NAME', 2 ,Width, 100);
          status := Show_LOV('LV_NAME',10,20);
          IF NOT status THEN
               Message('You have not selected a value.');
               Bell;
          END IF;
     END IF;
END;
My question is do I need to create the LOV Object name call 'LV_NAME'? since I don't have this
create on my design times, because I thought it can be done dynamically on the fly.
The problem is compliant that the Lov Id is not valid.
Thanks
David
Edited by: user445990 on May 24, 2011 9:19 PM

Hello,
You request is not clear. Do you need to display the LOV or not ? In other words, what is the goal of your record group ?
Francois

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Dynamically creating a Record Group based on Previously entered Record Grou

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Hi,
I know how to dynamically create a record group based on a query and putting the code in When new form instance.
My query is. I have a form which has multiple Record Groups and the user wants to dynamically create subsequent groups based on previous groups.
For example
I have a record group with selects a Location,
when the user selects the Location from a list of values
the 2nd record group called 'Cost Centres' will have to filter out only those with the locations selected above.
How can I populate the 2nd record group at run-time when I do not know what site the user will select?
If I simply populate in when new form instance as in location and just select everything, the list of values populates.
CC field is a LIST ITEM and the list style is a POP LIST, it is not required.
I have put the code in the Location field in the when-list-changed trigger.
I am getting this error:
frm-41337: cannot populate the list from the record group
here is the code:
DECLARE
v_recsql Varchar2(1000); -- The SQL for creating the Record Group.
v_recgrp RecordGroup; -- Record Group
v_status Number; -- Return Value of Populate_Group function.
c_where VARCHAR2(1000);
BEGIN
     IF :location = '1' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''02'')';
     ELSIF :location = '2' THEN
          c_where := ' substr(cost_centre,1,2) in (''02'',''03'')';
     ELSIF :location   = '3' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''11'',''07'')';
               ELSE
          c_where := ' 1=1'; --EVERYTHING
     END IF;
v_recsql := 'SELECT cost_centre, description FROM   cost_centres where '||c_where;
-- Create the Record Group
v_recgrp := CREATE_GROUP_FROM_QUERY('v_recgrp', v_recsql);
IF NOT ID_NULL(v_recgrp)
THEN -- No Error, record group has been successfully created.
-- Populate Record Group
v_status := POPULATE_GROUP('v_recgrp');
IF v_status = 0
THEN -- No Error. Record Group has been Populated.
POPULATE_LIST('block.CC', 'v_recgrp');
END IF; -- IF v_status = 0
-- Delete the Record Group as it is no longer needed.
DELETE_GROUP('v_recgrp');
END IF; -- IF NOT ID_NULL(v_recgrp)
END;thanks for your assistance.

Hi,
Once record status gets change for block you can not populate/repopulate the list item. Keep those list items as non-database item with different names and create different items as database orignal items. Than assign the values in WHEN-LIST-CHANGE trigger to the actual database items.
-Ammad

Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g

Hi All,
I have 2 Logical Table Sources(LTS 1 and LTS 2 for a Logical Table in BMM Layer).
Example: Logical Table : Sample
LTS Source 1 : Sample 1(Priority Group Set to 1)
LTS Source 2 : Sample 2(Priority Group Set to 0)
I have set the Priority Group of Sample 1 LTS Source to 1 and Priority Group of Sample 2 LTS Source to 0.
I need to dynamically change the Priority Group of Sample 1 LTS Source to 0 if my role is DEVELOPER where role is a column in database.
If my role is not equal to DEVELOPER then the Priority Group of Sample 1 LTS Source will remain same(1).
Please suggest how can i achieve this.
Thanks,
Soukath Ali

hello Soukath Ali,
didi you find a way to dinamically changing Priority Group?
thanks,
Maria Teresa Marchetti

How can I dynamically specify a Column Name in a Where Clause of a DB

I have a page that query the Database based on the column Name and values entered by the user. on this page I have a drop down list of all the Column names and a text field. The user can choose from any of the dropdown list option to set the column Name and also enter a value.How can I dynamically pass the option choosed by the user from the drop down list to the dataProvider in seesionBean1 as a column Name???Help

Hi,
This is a working example of a search form.
In the JSP page we have several texts box, a table bound to a DataProvider with the rowSet in the SessionBean and a search button.
JSP source:
                <ui:body binding="#{PackageAirtime.body1}" id="body1">
                    <ui:form binding="#{PackageAirtime.form1}" id="form1">
                        <table border="0">
                            <tr>
                                <td>
                                    <table border="0" width="100%">
                                        <tr>
                                            <td>
                                                <ui:label binding="#{PackageAirtime.pageTitle}" id="pageTitle" text="Package Airtime"/>
                                                <br/>
                                                <br/>
                                            </td>
                                        </tr>
                                        <tr>
                                            <td>
                                                <table border="0" cellpadding="2" cellspacing="2">
                                                    <tr>
                                                        <td>Package ID:</td>
                                                        <td>
                                                            <ui:textField binding="#{PackageAirtime.textPackageID}"
                                                                id="textPackageID"/>
                                                            <ui:button
                                                                binding="#{PackageAirtime.buttonPackageID}" id="buttonPackageID"
                                                                onClick="handlePackageIDPopup(); return false;" text="..." toolTip="Open package locator"/>
                                                        </td>
                                                    </tr>
                                                    <tr>
                                                        <td>Airtime Code:</td>
                                                        <td>
                                                            <ui:textField binding="#{PackageAirtime.textAirtimeCode}"
                                                                id="textAirtimeCode"/>
                                                            <ui:button
                                                                action="#{PackageAirtime.buttonAirtimeCode_action}"
                                                                binding="#{PackageAirtime.buttonAirtimeCode}" id="buttonAirtimeCode"
                                                                onClick="handleAirtimeCodePopup(); return false;" text="..." toolTip="Open airtime code locator"/>
                                                        </td>
                                                    </tr>
                                                    <tr>
                                                        <td></td>
                                                        <td>
                                                            <ui:button action="#{PackageAirtime.searchButton_action}" binding="#{PackageAirtime.searchButton}"
                                                                id="searchButton" text="Search" toolTip="Search records"/>
                                                        </td>
                                                    </tr>
                                                </table>
                                                <br/>
                                                <ui:staticText binding="#{PackageAirtime.staticTextSearchResults}" id="staticTextSearchResults"/>
                                                <br/>
                                                <ui:table binding="#{PackageAirtime.searchResults}" id="searchResults" paginationControls="true">
                                                    <script>
/* ----- Functions for Table Preferences Panel ----- */
* Toggle the table preferences panel open or closed
function togglePreferencesPanel() {
var table = document.getElementById("form1:table1");
table.toggleTblePreferencesPanel();
/* ----- Functions for Filter Panel ----- */
* Return true if the filter menu has actually changed,
* so the corresponding event should be allowed to continue.
function filterMenuChanged() {
var table = document.getElementById("form1:table1");
return table.filterMenuChanged();
* Toggle the custom filter panel (if any) open or closed.
function toggleFilterPanel() {
var table = document.getElementById("form1:table1");
return table.toggleTableFilterPanel();
/* ----- Functions for Table Actions ----- */
* Initialize all rows of the table when the state
* of selected rows changes.
function initAllRows() {
var table = document.getElementById("form1:table1");
table.initAllRows();
* Set the selected state for the given row groups
* displayed in the table. This functionality requires
* the 'selectId' of the tableColumn to be set.
* @param rowGroupId HTML element id of the tableRowGroup component
* @param selected Flag indicating whether components should be selected
function selectGroupRows(rowGroupId, selected) {
var table = document.getElementById("form1:table1");
table.selectGroupRows(rowGroupId, selected);
* Disable all table actions if no rows have been selected.
function disableActions() {
// Determine whether any rows are currently selected
var table = document.getElementById("form1:table1");
var disabled = (table.getAllSelectedRowsCount()>0)?false : true;
// Set disabled state for top actions
document.getElementById("form1:table1:tableActionsTop:deleteTop").setDisabled(disabled);
// Set disabled state for bottom actions
document.getElementById("form1:table1:tableActionsBottom:deleteBottom").setDisabled(disabled);
}</script>
                                                    <f:facet name="title">
                                                        <ui:staticText binding="#{PackageAirtime.table1Title}" id="table1Title" text="Package Airtime search results"/>
                                                    </f:facet>
                                                    <ui:tableRowGroup binding="#{PackageAirtime.tableRowGroup1}"
                                                        emptyDataMsg="No records matching the search criteria" id="tableRowGroup1"
                                                        sourceData="#{PackageAirtime.s23_package_airtimeDataProvider}" sourceVar="currentRow">
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn1}" headerText="Package ID" id="tableColumn1" sort="S23_PACKAGE">
                                                            <ui:staticText binding="#{PackageAirtime.staticText1}" id="staticText1" text="#{currentRow.value['S23_PACKAGE']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn2}" headerText="Airtime Code" id="tableColumn2" sort="S23_AT_CODE">
                                                            <ui:staticText binding="#{PackageAirtime.staticText2}" id="staticText2" text="#{currentRow.value['S23_AT_CODE']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn7}" headerText="Prepaid Value" id="tableColumn7">
                                                            <ui:staticText binding="#{PackageAirtime.staticText6}" id="staticText6" text="#{currentRow.value['SUBR_AT_PREPAID_PERIOD_VAL']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn8}" headerText="Prepaid Type" id="tableColumn8">
                                                            <ui:staticText binding="#{PackageAirtime.staticText7}" id="staticText7" text="#{currentRow.value['SUBR_AT_PREPAID_TYPE']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn4}" headerText="Start" id="tableColumn4" sort="PRSM_PK_START">
                                                            <ui:staticText binding="#{PackageAirtime.staticText3}" id="staticText3" text="#{currentRow.value['PRSM_PK_START']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn5}" headerText="End" id="tableColumn5">
                                                            <ui:staticText binding="#{PackageAirtime.staticText4}" id="staticText4" text="#{currentRow.value['PRSM_PK_END']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn6}" headerText="Units" id="tableColumn6">
                                                            <ui:staticText binding="#{PackageAirtime.staticText5}" id="staticText5" text="#{currentRow.value['PRSM_PK_UNITS']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn9}" headerText="Carry-over limit" id="tableColumn9" valign="Top">
                                                            <ui:staticText binding="#{PackageAirtime.staticText8}" id="staticText8" text="#{currentRow.value['ROM_PLAN_CARRY_LMT']}"/>
                                                        </ui:tableColumn>
                                                        <ui:tableColumn binding="#{PackageAirtime.tableColumn3}" headerText="Details" id="tableColumn3" width="100">
                                                            <ui:hyperlink action="#{PackageAirtime.viewpackageAT_action}" binding="#{PackageAirtime.hyperlink1}"
                                                                id="hyperlink1" text="View"/>
                                                        </ui:tableColumn>
                                                    </ui:tableRowGroup>
                                                </ui:table>
                                            </td>
                                        </tr>
                                    </table>
                                </td>
                            </tr>
                        </table>
                    </ui:form>
                </ui:body>
...JAVA source:
    public void prerender() {
        search_action();
    public String search_action() {
        try {
            String command = "SELECT s23_package, s23_at_code, prsm_pk_start, prsm_pk_end, prsm_pk_units, subr_at_prepaid_period_val, subr_at_prepaid_type, subr_disc_type, subr_disc_rate, subr_disc_value, subr_disc_perm, subr_at_prepaid_bill_per_val, subr_at_prepaid_recurring, s23_package_fwd, s23_at_code_fwd, prsm_pk_start_fwd, subr_ppa_infinite, subr_ppa_carry_over, rom_plan_carry_lmt FROM s23_package_airtime, ROM_23_PPLAN_COMP where rom_23_pack_plan = s23_package";
            String where = "";
            String packageID = (String)textPackageID.getText();
            if (packageID == null) {
                packageID = "";
            packageID = packageID.replace("'", "''");
            if (packageID != "") {
                if (where != "") {
                    where += " AND ";
                where += "upper(S23_PACKAGE) LIKE upper('" + packageID + "%')";
            String airtimeCode = (String)textAirtimeCode.getText();
            if (airtimeCode == null) {
                airtimeCode = "";
            airtimeCode = airtimeCode.replace("'", "''");
            if (airtimeCode != "") {
                if (where != "") {
                    where += " AND ";
                where += " upper(S23_AT_CODE) LIKE upper('" + airtimeCode + "%')";
            if (where != "") {
                command += " AND " + where;
            this.getSessionBean1().getS23_package_airtimeRowSet().setCommand(command);
            this.staticTextSearchResults.setText(tdi.business.Utils.getRowCountMessage(s23_package_airtimeDataProvider.getRowCount()));
        catch (Exception e) {
            log("Error during search for packages airtime", e);
        return null;
    public String searchButton_action() {
        search_action();
        this.tableRowGroup1.setFirst(0);
        return "";
    }I put the search_action() call in the prerender() to have data in my table when the page is open. For a large resultset the best aproach is to let the user select some search criteria and then call the search_action() using a button (searchButton_action() ).
I've added a hyperlink column to my table, it is used to display the current record details in a new page.
I have defined in my SessionBean a getRowkey/setRowkey methods.
When the user click on a "View" hiperlink the following code is executed:
    public String viewpackageAT_action() {
        RowKey row = tableRowGroup1.getRowKey();
        this.getSessionBean1().setPackageAirtimeRowKey(row);
        return "packageairtime_details";
    }I will step over the "Page Navigation".
In the Detail Page I have the following code:
    public void init() {
       this.s23_package_airtimeDataProvider.setCursorRow(this.getSessionBean1().getPackageAirtimeRowKey());
}Now I have the detail page opened and also the DataProvider opened at the saved RowKey value.
Finally, in the SessionBean:
     * Holds value of property packageAirtimeRowKey.
    private RowKey packageAirtimeRowKey;
     * Getter for property packageAirtimeRowKey.
     * @return Value of property packageAirtimeRowKey.
    public RowKey getPackageAirtimeRowKey() {
        return this.packageAirtimeRowKey;
     * Setter for property packageAirtimeRowKey.
     * @param packageAirtimeRowKey New value of property packageAirtimeRowKey.
    public void setPackageAirtimeRowKey(RowKey packageAirtimeRowKey) {
        this.packageAirtimeRowKey = packageAirtimeRowKey;
    }Note: You should enable page navigation in the result(s) table.
That's about it :)
Hope this helps,
Catalin Florean.

Can static/dynamic LDAP (not posix) groups be nested?

Similar Messages

Maybe you are looking for