Can STOs be setup to create delivery if 'complete' i.e. all items in stock?

Hi
we use Stock transport orders to ship product cross company codes.  Issue we have is that system created musltiple deliveries based on inventory availability. We would rather have the STO delivery created when all the items in the STO have stock.  is thee a means to set that up either via config, user exit etc?
We would like to only trigger the delivery if the order is complete.
We are on SAP 47 extension set 1
Thanks
Bill Olliver

Hi,
You can try setting this up in the customer master created for the other company code in shipping tab input "c"-"Only complete delivery allowed" in the field "Partial delivery per item"
Please try this it should work
Good luck
Sridhar

Similar Messages

  • Can a Salesforce lead be created automatically upon completion of an Echosign widget?

    I have created an Echosign widget that is hosted on my website to collect information from potential customers. I would like the information collected in that widget to be sent to Salesforce to create a new lead. Much of the documentation I see is how to send a document from inside Salesforce. I want the relationship to flow the opposite direction where EchoSign pushes information to Salesforce and creates a new lead upon submission.

    see the chapter
    Updating Salesforce with Push Agreements
    of the installation and customization guide. (page 83 of the v16 guide)
    You can use Adobe Document Cloud eSign API to send agreements for signature or create Widgets and
    embed them on your website and have all those agreements pushed and created in Salesforce.com just as if
    they were sent from Salesforce.com. You can also send agreements via the echosign.adobe.com web
    application and have them all pushed back to Salesforce.
    Note: This feature is not supported in Salesforce Professional Edition.
    if the agreement is signed by an email address which is ot yet a contact in your instance, it can be created as a lead.

  • Can iWeb Be Used To Create and Edit Completely Seperate Web-Sites/Pages?

    Is it possible to use iWeb to create completely separate web-sites/pages? As far as I can tell even what is called NEW SITE simple creates a new nested SITE folder.
    I want to use iWeb to edit totally separate web-sites.
    I want to be able to make a single word change on my home page without having to upload and replace my entire site.
    My work around for example would be to keep my Photo and Movie Album separate (where most of my memory intensive files reside)from the part of my site which is mostly text. And when I make a single word change to my home page I would simply upload that page. I would have a link from my home page to my Photo and Movie Album - much like I edit web-pages in Dreamweaver.
    Any suggestions?
    thanks.

    There are many ways to create brand new Domain/Site/page, see my posts:
    http://discussions.apple.com/thread.jspa?messageID=6460488&#6460488
    http://discussions.apple.com/thread.jspa?messageID=6007612&#6007612
    Splitting domain.site(2) is bad juju:
    http://discussions.apple.com/thread.jspa?messageID=6261141&#6261141

  • Can somebody please help me creating a GREP style to reformat all the website adresses in my layout?

    i've got this text from a client full with webadresses, some end with .com or .nl and i would like to highlight these adressess in bold and blue... i created a textstyle for it but the only thing i manage to get as a result is only the beginning of the website 'www.' i know it's possible but my skills are lacking in this departement...
    can anyone help me getting started...?

    Got it.
    parentheses group #1 (the first | separated OR group): DOS path name, because a link can also refer to a file.
    parentheses groups #2-5 (2nd OR group): e-mail address. Note: a "mailto://" prefix does not get matched here.
    parentheses groups #6-13 (3rd OR group): URL, with a mandatory prefix "http://", "https://", "ftp://", and some more ("smb://", for example, is a Samba server file prefix). This also includes "ftps://", which was unknown to me but it appears it's perfectly valid.
    It does not match the "mailto://" prefix for an e-mail address, but that's a moot point because the URL may not contain a @ character anyway.
    This group correctly recognizes URLs that contain one or more hyphens in the base name (it also correctly rejects hyphens in the domain extension).
    parentheses groups #14-15: (4th and last OR group): any non-prefixed URL, recognized solely on the basis of "any sequence of word characters, including the hyphen, followed by a period, optionally followed by some more characters (including both period and forward slash but excluding the hyphen), followed by at least two uppercase or lowercase letters.
    This last one is responsible for (a) recognizing both "deadline.com" and "keefe-studios.com" as URLs, but (b) also rejecting "www.test-test.com" -- a hyphen in the 'center', fully optional, part.
    Interestingly, there are more differences between the more exact 'match only with prefix' and the catch-all 'match about anything'. The former includes among the allowed characters: ':' (which, if I recall correctly, is only valid if a port number follows!), '#', '$', '%', '&', '?' and '+', so it matches a server query as well:
    http://www.google.com/search?hl=enl&tbo=d&site=&source=hp&q=allowed+characters+in+url&oq=a llowed+characters+in+url
    The latter does not include all of these characters, just letters, numbers, the hyphen (but not in all positions), and a period. It's probably because this is an unreliable way to match URLs after all -- hence the number of 'false hits'. These would only increase with even more allowed characters.
    Lesson learned: to be assured "Create Hyperlinks Automatically" works as expected, make sure URLs are prefixed with "http://", and mail addresses are not prefixed with "mailto://". I didn't test if the function actually creates a correct e-mail link, but even if it does the prefix is not included in the clickable linked text.
    (Also interestingly, it appears a GREP style, fed with this same query, doesn't stumble over the hyphen whereas a GREP find does. I don't think I'm capable of figuring that one out.)

  • Error in creating delivery with VL10B for STO

    Hi Gurus,
    I have created an Stock Transport Order with material A. I have inputted all the header data, supplying plant, receiving plant and location.
    But, when i process this STO in VL10B to create delivery document, system is givign an error message that there is no stock available to dispatch.
    When we check through MB52, MMBE stock is avaialble but, system is reading zero stock.
    We have also checked in MD04, material qty is assigned to the order which we have created. And there is no other order or delivery for this material.
    We have also raised an OSS message, suggested to go for rescheduling or Back order processing through CO06 or V_V2 respectively.
    Since there is no other order been assigned to this material, there is no question of going for either rescheduling or Back order processing.
    This error is coming in Production client and this is the first time we are getting this error.
    Request you to please suggest any process to rectify this issue.
    Regards,
    Praveen.

    Hi
    for ths forst you can check the purchase order and then you can find the avaliabillity check in releted to that po and then chek it will trigger or not other wise check in
    VL10F THEN  you can find the exact error for this
    regards
    s.pavan

  • Vl10 - can not create delivery

    Hi Experts,
    I cannot create delivery through VL10 but can create through Vl01n for sales order line item. Scenario is given below;
    Sales order confirmed Qty: 25 Pcs
    Delivered Qty: 25 Pcs.
    No limit to subsequent deliveries.
    there is overage, means I want to deliver more qty against this sales order line item. But VL10 does not create delivery for this sales order line item. While I can create delivery through VL01n.
    Any idea?
    Thanks in advance.
    Regards,
    SA

    Hi Erik,
    It does not work.
    Thanks,
    SA

  • Recommended setup for creating DLT master from adobe encore

    Hi, I have been working on a PC and just made a move to a Mac Pro using Adobe CS5. I am hoping someone can recommend a setup for creating DLT masters Encore. I understand a card is needed as well as the DLT drive.

    This forum is for Apple software. Best post your thread on the Adobe forums.
    x

  • Cannot Create Delivery without RLT

    Dear All
    I do not want to create Delivery unless inventory is available. So I have controlled it through Checking rule B, doing it without RLT. But Cheking rule A in Sales Order is with RLT so that I can confirm Customers Order.
    I have a strange Scenario.
    My Stock is 60. Sales oreder created for Today is 5 qty, so Confirmed Schedule line.
    Sales order with Schedule line date 31.12.2008 is 200 qty. So this is confirmed after end Lead time.
    But When I create Delivery it does not let me beacsue 60 stock available is now  booked for Sales order 31.12.2008.
    I know the reason that in Delivery creation RLT is not taken into consideration.
    But How this situation should be handled. If I do delievry ATP check with RLT then there are chances that Delivery may be created without stock.
    Experts opinions are invited.
    Regards,
    Neeraj Srivastava

    Hi christine,
      You can create delivery with quantity 0. But you need to customize at the delivery item category level. Once you complete this customizing system will allow you to create delivery with qty 0.
      If you would like to have the do the PGI, when the stock is available, then you need to configure Availabilty check at shipping level. Once you run the availabiltiy check in VL02N transaction, based on the ATP calculation, system will confirm the qty.
    Regards,
    Ravikiran Pochiraju

  • Zero dollar price - need to create delivery order

    Hi Experts,
    I have a query, Pls help
    I have recd a customer purchase order for material @ 0.00 prices. ather that we want to
    create Delivery Order with profroma invoice (there is no stock movement) for that part and no need create tax invoice
    Can we use Service material type? Sales order item category u201CService Order with Deliveryu201D?
    Need to know which Material Type I should create for this Part
    How to map this in SAP?
    Regards,
    Sankaran

    Need to know which Material Type I should create for this Part
    Material type can be HALB or FERT.  Moreover, in PO itself, you have the option to tick the box "Free Delivery". 
    thanks
    G. Lakshmipathi

  • An item with no delivery quantity is not permitted. Item will be deleted.

    Sales order created, the schedule lines are confirmed for the delivery date and qty
    order is not blocked for delivery
    order is complete
    still while creating delivery get a error message
    An item with no delivery quantity is not permitted. Item will be deleted.
    Message no. VL367
    stock checked through MMBE that is also available in unrestricted use
    kindly guide

    Check this thread
    [Re: Mesaage : while creation of delivery : An item with no delivery quantity|Mesaage : while creation of delivery : An item with no delivery quantity .);
    In MMBE though the stock shows under Unrestricted column, it also includes delivery created and saved without doing PGI.  So check in MD04 any delivery reference is flowing.
    thanks
    G. Lakshmipathi

  • Create Delivery against STO  define overdelivery tolerance

    Hello,
    Can anyone please suggest if there is a way to create Delivery More Than Open STO Quantity?
    My scenario goes like this lets say I have STO with Quantity 100 KG. I am creating delivery with 60 Quantity and system is allowing me to create delivery.
    now  I have 40 KG open so system is still allowing create delivery and Its allowing me to create of any amount although I dont have any Overdelivery Tolerance set up in STO or in Material Master.
    but If I try to create delivery again its says its not able to find the STO and hence does not create delivery so my requirement is to define over delivery tolerance and allow SAP to create delivery on STO over STO Quantity.
    I am using BAPI_OUTB_DELIVERY_CREATE_STO to create delivery.
    putting my requirement as example
    STO- 100 KG
    first delivery - 40 KG - as of now sap create delivery
    second delivery - 50 kg - here as well
    third delivery - 45 Kg - here as well
    fourth delivery - 50 kg -  does not create
    I know this seems bit confusing I tried to explain Please let me know if need more details.
    Thanks
    Shail

    Thanks Jurgen,
    One of my friend suggested me to try the copy control setting against delivery and changing the Quantity is calculated positively, negatively or not at all to zero which explains
    Indicates whether, during copying, the quantity or value in the target document has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document."
    I tried using this but still not working.
    I guess this may work if I create delivery from SO and not STO.
    for now I have requested User to Bump up the STO Quantity.
    but I want to find out which field and where the system check and determine if STO is fully delivered or does not have open quantity
    Thanks
    Shail

  • Error in creating delivery for STO

    Hi SAP Gurus !!
    I have these errors while trying to create delivery for a Stock Transport Order between 2 plants using transaction "VL10F"
    APO: Check instructions YA / BE does not exist for loca tion product PFSIND_SM_TEST_FCO / 2383
    APO: Check mode YA and business event BE not defined                                         
    APO: Internal error: Item $ 1/000001                                                         
    Only 0,00 PC of material PFSIND_SM_TEST_FCO available                                        
    An item with no delivery quantity is not permitted. Item will be deleted.                    
    I have chcked that there is sufficient stock available at the storage location level in the supplying plant.
    Can you please help me out of this please......

    Dear,
            Please try to check whether some STO is still pending for do complete process. If there is any pending STO then stock is block for this material.
    Regards,
    Sandip Shaktavat

  • Stock Transport Order (STO)will not create delivery

    I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
    I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
    Is there a way to see an anaylis of why the STO is not showing as a choice?
    Thanks,

    Hi,
    Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

  • Create delivery for STO line item

    Hi All,
    My requirement is to allow creating delivery for Stock transfer Order(STO) line items which are
    not in blocked status even though some line items are in blocked status.
    Right now the logic checks if entire PO is in blocked Status using FM-- /SAPSLL/CD_STATUS_GET in method CHANGE_DELIVERY_ITEM of interface IF_EX_LE_SHP_DELIVERY_PROC
    But this FM does not contain PO item parameters. I need to incorporate item level checking logic.
    Are there any SAP notes available to fix this problem?

    Hi All,
    Any clues on this?

  • VL10B - Creates delivery for STO after delivery date

    Hi All,
    VL10B batch job is scheduled to create delivery for STO automatically when stock is available (availability check 02).
    batch job creates late delivery though sufficient stock exist
    For ex. STO is created on 27 Aug 14 having delivery date 31 Aug 14. (STO is having only one line)
    VL10B batch job having delivery date as <= current date + 1.
    logically batch job should create delivery on 30 Aug 14 but in my case it is created on 07 Sep 14.
    Please help me to understand the cause of this.
    Appreciate quick response
    Regards,
    Anil Patel

    Hi Anil
    See note
    1245447 - Avail. check for deliveries that are created automatically
    "After you implement the corrections, the availability check is only deactivated when you create the delivery automatically. If you make changes to the delivery afterwards, the system runs the availability check.
    The availability check is deactivated for the automatic creation of deliveries for technical reasons."

Maybe you are looking for