Can subcontract PO use stock transfer order process?

Dear All:
Is anyone ever use STO for subcontract PO?
Our company have the request for this kind of flow, but I can't succeed the testing now.
I have cteate the subcontract PO and I can find the PO data in VL10D.
But when I click the background button to create DN , I always fail .
Hope someone can teach me how to do the setting.
PS. we have install AFS module , I don't know if ARun is necessary before creating DN .
Thanks a lot

Dear all:
After finishing STO configuration and testing , I have met some questions.
When use VL10D to create DN , systems notes show some message and no DN created.
Below is the error messages, hope some one tell me how to solve the errors.
Diagnosis
     There is no item category available in item category
     determination in the delivery (table T184L) for the
     following entries: ZLF NORM V
System Response
     The system does not allow further processing of this item.
Procedure
     Specify the appropriate item category for the above
     mentioned entries or inform your system administrator.
PS. I know how to setting the configuration in MM module , but I know a little about SD conifguration.
Thanks a lot.

Similar Messages

RE: Intercompany stock transfer order process

hi SD Experts,
I really appreciate if anyone explain me how to execute Intercompany stock transfer order with intercompany billing scenario.
I used T-Code ME27, but unable to do delv and intercompany billing
thanks in advance
regards
vaseem

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Stock transfer order process

Hi Experts,
can anybody provide me the Configuration and Easy Access steps to be taken to set up the stock transfer order? Please help me as I need to configure this at the customer site.
Thanks in Advance.

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Routing in Stock Transfer Order

Hi,
We are having SAP 4.7 & we have activated Transportation Routing process.
Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
Kindly revert back.
Thanks in advance.
Samir Bhatt

Hi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B

Consuming Forecast PIR (MD61) with Stock transfer Orders

Hello,
We have a Production Plant 1000 in which we load the sales forecast as PIRs (MD61) (we use strategy 10)
We sell from Plant 1xxx.
After production in plant 1000, we use Stock Transfer Orders to transfer the production stock to Plant 1xxx
From plant 1xxx we ship to out customer (normal sales process with shipping).
The problem we are facing is the following:
The stock Transfer Orders (STO)during a month do NOT consume the forecast loaded in plant 1000! There is no asignment to PIRs!
If I create a regular sales order in plant 1000 (which is not our normal process!), the Sales order quantity is automatically asigned to the PIRs to consume the forecast.
The same thing we want to acomplish with STOs.
I looked at Requirements Type KSL with Requirements Class 030 (from the strategy 10) but I can not make out were to manipulate it so it will work in our specific situation.
Anyone has done this before or had a similar situation? How did they solve it?
Thanks for any help on this one.
Aart

Aart,
I would assume your STO is created in plant 1XXX. So that would create a dependent requirement/reservation on plant1000.
Since PIR is in plant 1000, it should consume your PIR by using consumption indicator 3 (Consume customer reqmts, reserv., dependent reqmts).
You may not have to use consumption ind 4 ( using BADI). Hope this helps too.
Else Brahmankar's solution is the last resort.
Thanks,
Ram

Delivery Split in Stock transfer Order

Hello gurus,
In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
Regards
Soumendu

SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319

Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
Joã

Hi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik.

Material Division in Cross-Company Stock Transfer Order

We are configuring the cross-company code stock transfer order process. We seem to have all configuration done, but on the PO and Delivery the division that shows up at the item level is the sales area common division, not the division on the material master. Due to this, the business area is not being assigned correctly (Plant/Division), thus now allowing us to post the invoice.
Here are the specific Doc types we are using:
PO: NB
Delivery: NLCC
Delivery Item Cat: NLC
Invoice: IV
Any ideas as to how to get the division from the material master to show up on the PO and/or delivery so that's what pulls into the invoice? We also understand the the default Sales Order type DL is set for Delivery Type NLCC in the event there is no Sales Order. For Sales Order Type DL we have set the Item Division flag, but that is not working either.
Any ideas?
Thanks
Shane Newmyer

Hi buddi,
Thanks for the info, but neither of these things help with the division issue. I need to have the material division on the PO, Del and Invoice...
Any other ideas?

Configuration of stock transfer order

Dear All,
          Can anybody tell me the detail configuration of stock transfer order process between two plants within same company code ?
                                                                                with regards,
                                                                                RANA

Dear Kunal,
           i want to do stock transfer between two plants within same company code with delivery type "NL" and document type "UB" with delivery and billing except excise instead of delivery type "NLCC" and document type "NB .
                                                        with regards,
                                                           RANA

No planning of Stock Transfer Orders

Hi,
I have business scenario in which we transfer the material from production plant to the sales Depot using Stock Transfer Order created manually.
We do not want include these Stock transfer orders in planning run.
could any one reply on this.
regards
VS

Hello AV,
In the material master of that material (for the production plant where you run the MRP), select the MRP-4 view and in that for the field MRP Dependent Requirements, select the indicator1(Materials for dependent requirements are not planned). This solution i am giving by considering that you are creating the Stock transfer order in Depots and running the MRP in production plant.
Please check and confirm.
Regards,
Jitendra chauhan.

Stock Transfer Order two step process

Hi!
we are following stock transfer order in two step process along with WM
we are using movement types 641 & 101.
Now our client rerquiement is : when goods issue is posting in supply plant ( movement type 641), the accounting entry should be Goods in Transit A/C dr TO Stock Account Cr.
when goods receipt is posting in receiving plant the accounting entry should be : Stock Account a/c dr to Goods in Transit A/C, if there are price differences it will be posted to price difference accounts ( both have price control "S").
how can we acheive this.
Now only at the time of 641 or 101 we posting the accounting document as: Stock A/C dr ( receiving plant) to Stock A/C Cr ( issuing plant) and price difference.
regs,
ramesh

we can a report in MB5T, but there you cannot find value of the stock, only quantity of stock, as in STO, there will not be any price, that is the problem.
regs,
ramesh

Cross-system stock transfer order (cross CC and without using APO)

Dear experts,
I want to set up a stock transfer order scenario cross two SAP systems (and cross company code).
The examples given in SAP documentation point to scenarios using a joint APO system.
At the same time the documentation reads:
The number of process variants is a result of the combination of system landscapes and organizational units:
- with or without joint SAP APO
Does anyone in here have experience in setting up this scenarion without using APO system and could help me with a process flow and the IDOC sequence used for this?
Thanks and regards
Norbert

Hi,
and thanks for looking into this.
No, I do not have an APO (company is using JDA/manugisitcs) and I want to set up cross system STO between two ECC 6.0 systems directly.
I do have a number of idocs running between the systems already and also know the place where to configure a plant for cross system goods flow.
What I would like to know is if this scenario is supported at all and if yes, what is the sequence of idocs and and what are their triggers (in other words - the technical side of the business process) .
Best regards
Norbert

Creation of Stock transfer order using BAPI

Dear Gurus,
        I was trying to create Stock transfer order using BAPI function
        BAPI_PO_CREATE
        though i have defined Bsart as 'UB'
        still it gives message :
        " No master record exists for vendor MOH1 "
        Please show me path fwd.
        Thanks and Regards
        Gaurav sood

Dear all,
     Issue Resolved
thanks

How can we print the Stock Transfer Purchase Order

Hi,
How can we print the Stock Transfer Purchase Order??
Because from Transaction ME9L & ME9F, we can print simple PO's like NB, MPR etc..but Stock Transfer PO could not print.
Plz guide, from where we can do it...

Messages for PO are set in MN04. For details on how to follow this link:
Re: Problem with PO output determination MN04
Once the record is set here you will see the records in ME23n under messages button in header.
Edited by: Afshad Irani on Apr 30, 2010 10:09 AM

Can subcontract PO use stock transfer order process?

Similar Messages

Maybe you are looking for