Can success message be poped up

Hi All,
I need to populate success or failure message when the value get updated in my table view , please help me on this.

Abdull,
1. Drag datastore to your storyboard
2. Right Click datastore and select Configure Element
3. Click + button to Add new field
4. Enter Fieldname=SHOWPOPUP, Type=Boolean, Default=false
5. Click on dataservice that is feeding your message input and drag into the datastore
6. Right Click on this new data mapping line and select Confgure Element
7. Click on fx for the SHOWPOPUP field and set the value to TRUE.
8. Right Click your popup Form and select Configure Element
9. Click + button to Add new field
10. Select PUSHBUTTON control and enter field name OK
11. Double Click the OK fiend to open configuration popup
12. Select ACTION tab and change radio button to CUSTOM ACTION and enter name HIDEPOPUP
13. Click on fx on the VISIBILITY CONDITION of the form and select enter formula
14. enter STORE@SHOWPOPUP as the formula
15. Click on the OUT port of the popup form and drag line into the datastore
16. Right Click on this new data mapping line and select Configure Element
17. Click on fx for the SHOWPOPUP field and set the value to FALSE
18. Select the dropdown list for the EVENT NAME at the top of the Data Mapping and select HIDEPOPUP as the event.
19. Select LAYOUT tab and readjust the position of the form over the top of your output table.
NOTE: you may need to click the BRING TO FRONT icon in lower left with your popup form selected to insure that it is not hidden behind other objects.
Please do not be offended if I put in too much details and good luck
Best Regards,
Mark

Similar Messages

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Can I change the position of "process success message"?

Hello all,
I've looked around the forum but can't seem to find away to control the position of the "process success message" that displays when an update is made in a page process.
The message appears to be centered on the page, however because I have a region with a lot of columns the user will have to scroll to the right to see the "Update Successful" message that is returned from the process.
Does anyone know how to Left Align this message on the page?
Thanks for the help!

Thanks for the help!
I was able to left align the message by modifying the page template. In my case it was the template for "One Level Tabs"
I changed the following section in Body the body, I change the align from "center" to "left"...
<td class="t3PageBody"><div class="t3Messages" align="left">#GLOBAL_NOTIFICATION##NOTIFICATION_MESSAGE#Interestingly enough it did not work for me to change the Success Message in the Subtemplate section.

How can I display SQL%ROWCOUNT in the "Process Success Message"

Hi all;
I am trying to display SQL%ROWCOUNT in the "Process Success Message" of a custom update Process.
Any ideas?

Chris,
I assume,
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID );
is a package / procedure you call to do something. Change the procedure and add an
out parameter to it, which will get the
SQL%ROWCOUNT
value. Then, call this package like this:
DECLARE
in_DEPARTMENT_UID NUMBER;
BEGIN
in_DEPARTMENT_UID := :P4_DEPARTMENT_UID;
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID, :P4_ROW_COUNT );
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Skillbuilders modal page - success message not closing in Internet Explorer

Hello,
I'm using Skillbuilders modal page plugin on Apex 4.1.
The plugin works great in all browsers except in IE, where I'm unable to close the success message by clicking on the "x" in the upper right corner.
I'll explain further.
I have a report on, say, page 10, and I'm editing each row in a modal page (page 11). Upon saving the changes, the modal page closes and a success message is shown on the page 10. I can see the message both in Firefox and IE, however, I am unable to close it in IE.
When I inspect the success message using Firebug in Firefox, I see that I have:
<div id="messages" style="display: block;">
<div id="success-message" class="success">
<img class="remove-message" onclick="$x_Remove('success-message');" alt="" style="float:right;" src="/i/delete.gif">
Action processed.
</div>
</div>However, when I inspect the success message in IE, I see:
<div id="messages">
</div>The success message is shown on the page, but it doesn't show in the page source code, and clicking on the "x" doesn't close it.
I've tried it with several themes, the problem persists.
Does anyone have any idea what might be the problem here?
Did someone have a similar problem?
Thank you!

I've been looking at it, kind of gutted that indeed the semi-colon means nothing. Was sure that was it, and then didn't bother to test it in the template anymore as it ate so much time already. That should teach me...
Anyway, I was puzzled too. Apparently it has to do with IE8 and jQuery appending code to the document, whether it is .append or .before. The element is there and all, but the onclick just does nothing. Why did it work after editing it? Probably because IE was then able/willing to pick the attribute up.
I've fiddled with it over and over, trying to find something ,googling it, but couldn't really find a certain cause nor fix. Putting in the anchor? Nope. Onclick reacting only on second click? Nope. Just do an alert? Nope. Just nothing works at all. I really just gave up. IE8 is just such a headache that by trying to "fix" it in its ways you're off worse.
In the end I fixed it in another way. My template is different than yours but the technique is the same.
I removed the onclick attribute from the success message region, on both page templates. If it ain't gonna work I don't want it there (good riddance too). I changed the href attribute too by just putting "#" in, which is probably just me being pedantic. This is my result success message template:
<section class="uRegion uWhiteRegion uMessageRegion clearfix" id="uSuccessMessage">
<div class="uRegionContent clearfix">
    <a href="#" class="uCloseMessage"></a>
    <img src="#IMAGE_PREFIX#f_spacer.gif" class="uCheckmarkIcon" alt="" />
    <div class="uMessageText">
      #SUCCESS_MESSAGE#
    </div>
</div>
</section>To be able to close it, I added some javascript in the page header:
<script type="text/javascript">
    $(document).delegate(".uCloseMessage", "click", function(){$(this).closest(".uMessageRegion").remove(); return false;});
</script>This is much in the way of a dynamic action with scope "live". I didn't want to bother with having to put a dynamic action on each page, and is why I did it this way. It works fine in each browser too, so hurray.
Your solution works too of course, it's much the same. I wouldn't call it a "workaround" too, since it didn't work initially anyway. I wouldn't look further and stick with what works best for you. :)

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to include HTML tags in a success message?

I have seen a few posts on this topic in the past, but have not seen a definitive response...apologies if this has been answered.
I would like to have a dynamic process success message that includes some HTML tags in it - in this case an anchor tag that can jump the user back to the object he/she just edited.
So, I build up a dynamic success message in a page variable - say P10_SUCCESS_MSG - and set the Process Success Message field in the relevant Process to &P10_SUCCESS_MSG.
The problem is that when the page template substitutes in my message for #SUCCESS_MESSAGE# it looks like it also escapes any HTML tags, so the markup gets displayed literally on the page.
Is there any recommended way to override or get around this behavior?
Many thanks,
Bill

I just noticed that it looks like the success message is passed around on the URL - when I look at my URL after a successful form process, I see &success_msg=BIG_UGLY_ESCAPED_SUCCESS_MSG_HERE embedded in the URL. If this is the case, I can see why - technically - it ends up getting escaped. Looks like I may have to figure out my own hack for success message processing - maybe some weird post-processing of a placeholder success token that I replace in a page 0 process or something...

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

ERROR MESSAGE KEEPS POPING UP " ADOBE FLASH PLAYER 11.8 R800 HAS STOPPED WORKING"

MESSG KEEPS POPPING UP EVERY FEW SECONDS, I HAVE UNINSTALLED FLASH AND REINSTALLED IT FROM ADOBE'S WEB SITE BUT IT STILL KEEPS POPPIN UP. WHAT HAVE I DONE WRONG?

MY PROBLEM IS EXACTLY THE SAME AS YOURS. I ALSO HAVE FIREFOX BUT I CANT TAKE A SCREEN SHOT OF MY PROBLEM BECAUSE THE ERROR MESSG POPS UP SO OFTEN AND LOCKS UP MY COMPUTER UNTIL I HIT THE X BUTTON ON IT BUT IT POPS RIGHT BACK UP AGAIN. I THINK I HAVE ELIMINATED THE PROBLEM TEMPORARILY   BY DISABLING ANY POPUPS THAT HAVE ANYTHING TO DO WITH FLASH. NOT THE BEST SOLUTION BUT AT LEAST I CAN USE MY COMPUTER.
Date: Thu, 19 Sep 2013 08:50:41 -0700
From: [email protected]
To: [email protected]
Subject: ERROR MESSAGE KEEPS POPING UP " ADOBE FLASH PLAYER 11.8 R800 HAS STOPPED WORKING"
    Re: ERROR MESSAGE KEEPS POPING UP " ADOBE FLASH PLAYER 11.8 R800 HAS STOPPED WORKING"
    created by bruizzar in Using Flash Player - View the full discussion
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5696352-404040/450-206/Adobe+E rror.JPG
I am having the same issue. I use Mozilla as my web browser and encountered the problem when I signed in to my Yahoo mail account.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5696352#5696352
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5696352#5696352
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5696352#5696352. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Process Success Message not working

Hi
I have created a process to send a mail on some button click...
The process success message i have given that
Mail Sent Successfully!
Though the mail is coming I am not getting the Mail Sent Message!
Can someone help to let me know what am I missing?
Thanks
Ankit

Ok another fishy question
Can a process sent a Successful Message without completing the task?
I get the message Mail Sent though I never receive the mail...
In test environment apex.oraclecorp.com it is working sending the mail.
But in production database.us.oracle.com it is not working :(
I have made the exact copy in production site!
What can i be missing?

Process Success Message not displaying properly

Hello.
I know there are many threads about this problem. But i can't get it right.
I have custom MRU process like:
DECLARE
p_updcount NUMBER := 0;
BEGIN
FOR i IN 1 .. apex_application.g_f08.COUNT
LOOP
    IF apex_application.g_f08 (i) IS NOT NULL
      AND substr(APEX_APPLICATION.g_f20 (i),40) !=
      wwv_flow_item.md5 (apex_application.g_f07 (i),
                apex_application.g_f08 (i),
                      apex_application.g_f09 (i),
                         apex_application.g_f10 (i),
                         apex_application.g_f11 (i),
                         apex_application.g_f12 (i),
                         apex_application.g_f13 (i),
                         apex_application.g_f14 (i),
                         apex_application.g_f15 (i),
                         apex_application.g_f16 (i),
                         apex_application.g_f17 (i),
                         apex_application.g_f18 (i),
                         apex_application.g_f19 (i)
                         )||'" />' THEN
     UPDATE table
          SET ...
       WHERE id = ...;
      p_updcount := p_updcount + 1;
    END IF;
END LOOP;
:P232_UPDATE_NUMBER := p_updcount;
END;
{code}
In the same process, success message looks like:
Number of updated records: &P232_UPDATE_NUMBER. .
Item :P232_UPDATE_NUMBER is text item.
Even if i set default value in item, it doesn't work. Value is shown in item, but not in message.
Message looks like: Number of updated records: .
Items "Source used" is set to Only when...
If i set it to Always, ..., value doesn't appear in item.
Any idea?
Thanks.
Regards,
Dejan

Hi,
If i write code to check for updates after header, it is not necesary true that the user already updated some columns?Or am i wrong?>
The Custom MRU has to be OnSubmit. I was talking about initialization of the Page Item
To set the value of the item in Session State set the value using Before or After Header Computation or Process.E.g. write After Header Computation for P232_UPDATE_NUMBER > Static Assignment > 0
. I am not referring to Custom MRU.As I said earlier, if your CustomMRU process runs you should see a number >= 0 in the message. You will need to initialize only, to say 0, only for situations when the Custom MRU does not run (condition evals to false).
Cheers,

ADF 11g:Success message on fire fox Staus bar

Hi all,
Im working on ADF 11g - Jdeveloper 11.1.1.2.
The page contains a ADF table with Create, Edit and delete operations. The success messages of these operations have to be displayed on the staus bar of the Fire fox browser.
Ex: "Record Successfully created" whenever there is a successful insertion of a record in the ADF table.
How to display the user generated message on the staus bar of Fire fox? Please help....
Thanks,
Manasa.

I'll bite. Presumably you're trying to mimic the same functionality from Forms. Firstly I'll flag that you need to convince users that browsers aren't Forms, and they do things in their own ways. A typical browser user doesn't look to the status bar for messages from an application, the status bar is reserved for browser raised messages.
Yet I also understand it's hard to bend such requirements, so in addressing that requirement specifically, my understanding is the ADF framework doesn't provide this functionality out of the box. You will need to build your own. As a start independent of ADF there appears the ability in Javascript to write to the browser status bar through a function called statsword: http://www.htmlite.com/JS017.php
At this stage I've no inspiration on how to build this in to an ADF solution (it's far too early in the morning), maybe another reader can help, but I suspect a solution might use the ADF af:serverListener and af:clientListener tags.
CM.

How to change the   Success Message for Personal Data Screen in ESS

Hi,
       While saving the Personal Data in the ESS I want to chage the Success message.When I check the DC , Message Class i am not able to find the the particular string.Can any one please guide how to find the Success Message String   for this Personal Data Screen or Which BAPI I have to check .
Regards
Alexi

Hi iidhya ,
Please find the code below
    public boolean onEvent( )
    //@@begin onEvent()
    String event = fpm.getEventData().getEventName();
          if (event.equals(IFPM.EVENT_ADD)){
               wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
          }else if(event.equals(IFPM.EVENT_EDIT)){
               wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          }else if(event.equals(IFPM.EVENT_REMOVE)){
               wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          return true;
    //@@end
Regards
Alexi

How to display Success Message in PDF

Hello all
I need to display a success messgae in ODF. but without he message box.
It should be such that, after the success, the user should not click yet see the success message.
I got only MEssageBox. But that gives a pop up.
Please let me know about other methods.
Regards,
Aditya Deshpande

If you are using Web Dynpro then you can make use of the MessageArea control and display the messages there.
Alternatively if you want to achieve this in Adobe itself then probably you will need to play with a text field and hide / unhide depending upon your execution.
High level steps would be:-
1. Create a TextField / TextArea element and bind it to the success node in your form. Initially you need to hide it.
2. Upon submission, when the execution is complete then unhide it and show the message displayed the response you receive.
PS: You will need this to be an Interactive Form for this to work.
Chintan

Can success message be poped up

Similar Messages

Maybe you are looking for