Can SunOne 6.1 run using the JRE? (i.e., not the JDK).

Because of security restrictions, we are not allowed to have the JDK installed on our web server machine. Is there a way to run SunOne 6.1 using only the JRE?
In the 6.0 version of SunOne, there was an option to specify use of the JRE rather than the JDK. I don't see this option in the current version.
Does anyone know if this is possible?
Thanks.

The reason for not allowing the JDK (as opposed to the JRE) is because this is considered a "development tool". I.E., you can compile code using the JDK, which you cannot do with the JRE.
As far as the contents of /bin? I am assuming you are referring to the /bin directory that is under the SunOne root install. Correct me if I am wrong, but this only contains the JRE. I looked, but don't see the JDK under there.
Any insight would be appreciated.

Similar Messages

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

How do I increase the maximum number of images I can acquire in a sequence using the IMAQ 1424 with 80 MB of onboard memory and a Duncan Tech camera?

I've increased the maximum number of buffers to higher than I need, but I still cannot acquire more than 139 images with the Duncan Tech digital video camera before I get a memory lock error. Is there any way to increase the number of images I can acquire in a sequence using the IMAQ 1424 with 80MB of onboard memory?

It sounds like you are already bypassing the onboard memory. If you weren't, you would only be able to acquire about 20 images.
If I understand correctly, you do not convert the images until after you acquire them. This means each acquired image is 4.13 MB, and 139 images will take 574 MB of memory. I wouldn't be surprised if that was all the free memory available on a 1 GB machine. The operating system, LabVIEW and any other software running probably take up the rest of the memory. You might want to put your computer on a diet and minimize the number of other programs and utilities running. The only other option I see is getting more memory if possible.
Is there a way that you can reduce the number of images you need to acquire? Pe
rhaps skipping every other frame? Do you really need more than 139 images?
Is it possible to acquire the images in monochrome? That would triple the number of images that you could acquire.
Bruce
Bruce Ammons
Ammons Engineering

"Xcode cannot run using the selected device" for no apparent reason.

EDIT: It was just because I hadn't told Xcode to use my iPhone for development... I thought I had already done that. I also had to wait a few minutes after enabling it for development for it to actually work.
I'm using Xcode 5 and an iPhone 5 for development. I made an app ID with the ID "com.myname.agreementfinder". Then I made a development provisioning profile linked to that app ID. In my developer provisioning profile dashboard, it clearly says that the app ID is "com.myname.agreementfinder". I downloaded the provisioning profile and put it on my iPhone using the Xcode organizer, no problems. So now I have a profile in my organizer that has the app identifier "U2M9******.com.myname.agreementfinder" (part of it censored). Not sure what that weird number at the beginning is, but my other profiles have one too.
I have a project with the bundle identifier "com.myname.agreementfinder" and deployment target iOS 7.0 on iPhone, so it should work with that, right? Actually, the project was renamed from "FBFun". Well Xcode keeps saying that it can't run it on there because "No provisioned iOS devices are available with a compatible iOS version." I wish it would say which, invalid version or no provisioning profile
How should I fix this? It seems like everything is already fine, yet it won't work. Could it be that renaming the project caused problems?

I did. I did "Product -> Clean", it replied : "Clean vog_x20_new: Succeeded" and then I did "Product -> Build", and it replied "Build vog_x20_new: Succeeded".
Ok, so I may have misunderstood my own problem. It's not a compilation problem. But, I still have the same message when I try to run the program (i.e. "Xcode cannot run using the selected destination").
So it seems that I can build the project but I cannot run it.
Here is a screenshot of the error windows
So what should I do next ?
Thanks for you attention and help.

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?
We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible?
We both have itunes and apple ID's of our own right now, but since getting married, we are deleting these e-mail accounts and sharing one. How can we make this work?

You may use the same Apple ID for iTunes and App Store purchases, but using different iCloud Apple IDs is recommended.
If you use the same iCloud account on your iPhones it will sync all of your contacts, reminders, and notes automatically and it could be a pain. I don't know exactly how you would want to have the iCloud accounts set up on the Macs, because I don't know exactly how you use them. (I am assuming you share?). But you can do whatever you like, you can even keep the same iCloud accounts, etc but you may want to disable the syncing of certain items, because reminders for ones phone popping up on the others automatically would probably get annoying, but that is just me.

I have two Apple ID, how can I delete one and use the email address associates to the main one?

I have two Apple ID, how can I delete one and use the email address associates to the main one?

If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

I can no longer receive mail using the mail app? I have to go online instead - why?

Hej some one,
I can no longer receive mail using the mail app? I have to go online instead - why & what can I do?

Check your smtp preferences in mail.app.
See if mail.app's Connection Doctor has any useful info. Does it's status indicate all is ok? When you use it's Show Detail are there any (useful) error messages?

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT5071 Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed by an offset press to sale in brick and mortar stores? If so, is this procedure free me from any IBooks restrictions?

Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed on an offset press to sale in brick and mortar stores? If so, is this procedure free from any IBooks restrictions?

It's your content, under your control.
If you output as an .ibooks file, and you want to sell it, the store is the only outlet, otherwise, you can do as you wish.

Can't access my gmail using the gmail app. States your browser's cookie functionality is turned off. please turn on. How do i do that???

Can't access my gmail using the gmail app. States your browser's cookie functionality is turned off. please turn on. How do i do that???

what if I don't want to accept cookies? I didn't have to before I upgraded

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Who can tell me how to use the transction "KKRC"?

who can tell me how to use the transction "KKRC"?
Please explain me all the steps to be required.
Thanks in advance!

hi..
http://help.sap.com/bp_bl603/BBLibrary/Documentation/181_BPP_EN_BR.doc
KKBC HOE Transaction code Error
Regards

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

Can SunOne 6.1 run using the JRE? (i.e., not the JDK).

Similar Messages

Maybe you are looking for