Can system time be different in each LDOM?

We have a requirement to perform application testing which involves changing the system date/time to simulate batch runs at future dates. I understand that Solaris Zones can not have independent system times (although there has been an open RFE for almost 4 years)
Can this be achieved with LDOMs? ie, can you change the system time in one LDOM without affecting the others?
- Oliver.

Yes. Don't forget to stop the ntpd service if running. Short example on a guest domain :
# svcadm disable svc:/network/ntp:default
# date
Tuesday, January 29, 2008 5:34:38 PM MET
# date 2200
Tuesday, January 29, 2008 10:00:00 PM MET
# date
Tuesday, January 29, 2008 10:02:22 PM MET

Similar Messages

Suppose the loads are running in BW, but the BW & System Times are differe

BW system time is greater than the R/3 system, how we can ensure wether the loads are uploaded into BW System?

Hi...........
Look..............While loading data From R/3 to BW............first Extraction will start...........ie the Extraction Job..............if u copy the Request no from the Header tab of the IP Monitor...............then go to the Source System ..........SM37 >> Put the Request no with BI as prefix..............there u can see the Status of the Extraction Job...........
Now if u r in BW............then U hav different options.......
PSA and Data Targets/InfoObjects in Parallel >> A process is started to write the data from this data packet into the PSA for each data package. If the data is successfully updated in the PSA, a second parallel process is started. In this process, the transfer rules are used for the package data records, data is adopted by the communication structure, and it is finally written to the data targets. Posting of the data occurs in parallel by packet...................This method is used to update data into the PSA and the data targets with a high level of performance. The BW system receives the data from the source system, writes it to the PSA, and starts the update immediately and in parallel into the corresponding data target............
In this case Extraction and Loading to the Target will complete parallely.....................when the Technical status will be green..and the Extraction node and the Processing node both will be green............at that time u will understand that load got completed..............
PSA and Then into Data Target/InfoObject >>A process that writes the package to the PSA table is started for each data package. When the data has been successfully updated to the PSA, the same process then writes the data to the data targets. Posting of the data occurs in serial by packet.
In This case first the Extraction Job will get completed.............ie the Extraction node will be Green..........at that time Data Packets will be Yellow...........After some time all data packets will green..............Technical status will be green.along with the data paclets..............it means load completed............
Only PSA >> Using this method, data is written to the PSA and is not updated any further. In this two seperate Background JObs will be created...............First the Extraction Job will completed.............then the Technical status will be green............then a new JOb will Start to push from PSA to data target............After Loading till PSA...............if u go to the Status tab..............there u will find Processs Manually tab............if u click there update to Target will start..........then Tecxhnical status will again be yellow................after update to the Target get completed....................Technical status will aagain be Green.............
Now if u r in BI 7.0...................Then infopackage will loaddata till PSA.............u can monitor the Extraction job............Then u hav to Excute DTP to load from PSA to the target..............In the DTP monitor u will find the DTP request............in the SM#& in BI side...............u can monitor this Job.............
Hope this helps.........
Regards,
Debjani........

Firefox keeps crashing at seemingly random and infrequent times on different websites each time. One moment it will be fine, then without reason it will crash continuously

For a good few months now Firefox has quite frequently been crashing on me for no reason that i can distinguish. I have attempted to fully re-install Fire-Fox with a fresh install and tried sorting out the addons but nothing seems to help. I also ensure to run it in administrator mode for windows 7 but again, to no success. Basically i could be browsing the web perfectly fine and it will randomly crash on a website, what websites it crashes on changes all the time, some times it even crashes on my google homepage constantly and often only a computer restart will sort it out. It will then run fine for a short while before inevitably Firefox will crash again. If i could find out whats causing these crashes i could then work on stopping them. Thanks in advance for any support.

Ill post some of the most recent reports that have happened, if you need more there are plenty logged on there:
https://crash-stats.mozilla.com/report/index/bp-856e4f4c-80b6-44f4-a0f4-a7f622110220
https://crash-stats.mozilla.com/report/index/bp-3925f702-e5cf-4b9b-a773-b04a62110220
https://crash-stats.mozilla.com/report/index/bp-5e045cb3-bd57-4c4b-9191-01ec02110220
https://crash-stats.mozilla.com/report/index/bp-dca3d299-a239-4d73-81a1-e3ce92110220
https://crash-stats.mozilla.com/report/index/bp-c1d6b0e1-1183-42ae-bb45-cf0bf2110220
https://crash-stats.mozilla.com/report/index/bp-21072c01-4260-4ae2-be38-4d6b02110220
https://crash-stats.mozilla.com/report/index/bp-46d6c72c-63a4-478e-aeab-523242110220
https://crash-stats.mozilla.com/report/index/bp-3d730d91-edea-4a0b-a6bd-203492110218
https://crash-stats.mozilla.com/report/index/bp-141df5f0-fd69-4471-9828-d6edd2110217
Again thank you for your time and effort in helping me with this.

Calculate Production Order time past rate of each operation

In QM module. Any solution can achive this?
Calculate Production Order time past rate of each operation. QM in production order in-processing inspection. Whether can calculate time past rate of each operation by the operation confirm.
Past Rate = Cofirm Qty. / Total Qty. of Operation.

Hi,
Given the very limited info from your end, i presume it is for a Z report. If yes, you can obtain that info from tables - AFRU (for confirmations), AFVC & AFVV (for operation details). If you need any header details of the order, refer to AUFK & AFKO.
Regards,
Vivek

TS3694 my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore, but when i do it keeps coming up with error code!! which is a different one each time can anyone offer some advise to solve this frustrating pro

my i pad is showing connect to i tunes picture when i connect to i tunes it tells me i need to restore to factory settings, but when i do it keeps coming up with error code!! which is a different one each time can anyone offer some advise to solve this frustrating problem.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

How can I have two different windows up on one screen at the same time?

How can I have to different windows open on my screen at one time? Kind of like a split or shared screen.

If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

Can i have two different face time accounts on one apple id

Would like to have two different face time accounts, one on mac book pro and one on ipad. Can I have two different face time accounts on one apple id?

You simply need to have a separate e-mail identifier for each. One e-mail address would be associated with the mac book, the other separate and distinctive e-mail address would be associated with the i pad. This is done under one single apple id. Essentialy, the e-mail addresses are the FaceTime calling numbers for each.
Wuz

Can iTunes play 2 different songs on 2 different airport express at the same time?

Hi
I am trying to setup a multi zone home audio system where iTunes will be the main source of music. I would like to be able to listen to different music in multiple zones at the same time and I am trying to find out if iTunes can support this or not. I know there are "multi zone audio systems" that can be purchases from different companies (elan, Russound, Control4, etc) but I want to see if this functionality exists within Apple hardware before purchasing a different system.
Any help would be greatly appreciated.
Thanks.
Dave

crocky04 wrote:
I want to see if this functionality exists within Apple hardware before purchasing a different system.
using two TV's you could do what you want. you'd have to select the content to stream on the units themselves or use Apple's remote app on an iDevice.

TS1367 Hi, I am trying to install 'Playonmac' so I can install Meta Trader 4 - however, each time I reach the next button in order to install XQuartz it hits a deadend there - the 'Installing Quartz' window is saying installing Quartz,but thats as far as

Hi,
I am trying to install 'Playonmac' so I can install Meta Trader 4 - however each time I reach the next button in order to install XQuartz it hits a dead end
- the 'Installing Quartz' window is saying installing Quartz, but all it does from there is the clock the spins around, just keeps spinning and nothing happens - I have waited and waited for it, but it just kind of freezes there. I have reloaded the software over and over, and even switched off the firewall in case it was blocking Playonmac. It is really important I load Meta Trader 4 on my Mac.
Help will be much appreciated - Has anyone had this sort of problem? Does anyone know how to resolve it?
Regards
Joe

According to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers.

Shopping cart Creation Time is different from system time

Hi ,
Shopping Cart Creation Time is Different from System time.
Could you tell me,        to which time it is refering to.
How to change it.
Create By is      webseruser
Where can I find the required settings for the same
Thanks In advance

Hello,
Are you checking this in BBP_PD?
If you go to SU01 and check parameter "Personal Time Zone" -> "of the user", this time will appear to end user when creating document (document header in web).
                                                                                If you do not have informed any value, it will be populated the pattern system timezone, defined in SU01 as well.
                                                                                - I created a RFX in my test system with a user who's timezone (in tx SU01) is set as:
Sys. Time Zone     CET
of the User        INDIA
- CET time was 20:01:55
- GMT time was 18:01:55
- India time was 23:31:55
Looking at this RFX in BBP_PD I see the following:
Same user (India timezone and CET as "Sys. Time Zone"):
Created_At: 20:01:55
Changed_at: 20:01:55
DETAILS (header):
Created at: 18:01:55
Changed at: 18:01:55
RFX header (description): 23:31:55
So, for end users, you should populate field "of the user" in SU01.
In BBP_PD header details, you will have the GMT time (which is stored in internal tables).
In BBP_PD created_at and changed_at you will have the system time zone, as defined in SU01.
Regards,
Ricardo

Download, different checksum each time. 11.1.0.6 db for linux install fails

Hi
From the Oracle d/l site I have downloaded the same 11.1.0.6 db file 3 times and got 3 different cksum values.
1844527800 May 15 14:25 linux_11gR1_database_1013.zip
cksum linux_11gR1_database_1013.zip
1640646659 1844527800 linux_11gR1_database_1013.zip
But should be
1044354138
Not having this problem with any other d/l's.
Needless to say that, although it unzips, the installer fails in different locations each time (33%, 45%) Typical error below. Installer just hangs
Is anyone else having the same issue?
It seems to be tied to the oracle site as no other downloads I make are suffering this problem.
I'm thinking of taking the 3 downloads and somehow trying to patch one good one out of them by diff'ing the folders but this is tedious.
Thanks
Kevin
typical error
java.util.zip.ZipException: invalid entry CRC (expected 0xb8224b90 but got 0xe8ea93c7)
at java.util.zip.ZipInputStream.readEnd(ZipInputStream.java:378)
at java.util.zip.ZipInputStream.read(ZipInputStream.java:141)
at java.io.FilterInputStream.read(FilterInputStream.java:90)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1470)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:307)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:227)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:146)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)

Hi;
Can any one advise me where and how can I download proper RPM packages and how do I resolve swap space requirement failure as mentioned above. Please let me know if further information required.You can find all related rpm from your DVD. For rpm please see below thread:
RPM confirmation
Re: Package install for oracle11gr2
For swap:
swap size increase-linux
How to increase swap size?
Regard
Helios

I am downloading after effects and its will get to a different spot each time and say retry....... why wont it work!!!!????

i am downloading after effects and its will get to a different spot each time and say retry....... why wont it work!!!!????

you're probably losing connectivity.
you can try a different browser and/or a different wired connection and/or a download manager or if you follow all 7 steps you can directly download from prodesigntools.com
if you need a prodesigntools.com link, which version of ae do you need?

How can i get the System Time from the other host

I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

Open a socket to port 13 and read a string with the time.
-or-
Open a socket to port 27 and read 4 bytes that are a network order timestamp
Assuming that your UNIX machine has those services running, most do

I can't print an item,and each time I attempt to do so a message reads that the item is either spam

I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
What gives?

What is the format of the item you are attempting to print (via ePrint?)? Is it a supported format? See an updated list here.
Although I am an HP employee, I am speaking for myself and not for HP

I have four devices on my itunes account. Can I allocate gift cards to each different device?

I have four devices on my itunes account. Can I allocate gift cards to each different device?

No.
The credit is applied to the account, not the device.

Can system time be different in each LDOM?

Similar Messages

Maybe you are looking for