Can't able to release transport request which has process chain information

Hi Experts,
Can any one come accross the similar issue? . If so I am eager to know the fix for it.
I have collected my process chain in a transport request and when I am trying to release the same for import to another system, I get the following error message.
Error Message: some object (start varient for process chain and DTP process) is missing in the transport request.
BUT THE MENTIONED OBJECT IS COLLECTED AND I CAN SEE UNDER MY REQUEST.
But still i get the error message. Not sure where the problem is.
Hope there might be some solution to resolve the issue.
Thanks and Regards,
Saravanan.

Hi All,
I have tried all the options which you all suggested, but still i face the same issue.
I tried collecting it through transport connection through RSA1.
Right click on request/task.
Please let me know any other solution to resolve.
Are there any check will be happened at database or somewhere else when collecting the transport?
Thanks and Regards,
Saravanan.

Similar Messages

Want to crate a bc set with transport request,which has deleted records

Hi
I need a help in BC sets regarding records deletion.
I want to create a BC sets with the transport, which has one deleted records from the table
I have 30 records in table. I have deleted one record and created transport for the same.
When I try to create BC sets with the above transport. It is not showing records, which is in Transport request.
Could you please help me on this How can we create BC sets with deleted records.
Thanks and Regards,
Venkat

Hai,
Please check the following link.....
http://help.sap.com/saphelp_nw70/helpdata/en/a6/c3a768465411d395c600a0c930dcc1/frameset.htm
Regards,
Yoganand.V

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

Transport Request Ended with Process variant error

Hi,
One transport request related to process chains failed with the follwoing error.
Process variant CHAIN SCOMMONMD does not exist in version A.
Process variants are not avaialble with version A in target system.
Anyone suggest me how to mainatain process variants to resolve this error.
Regards,
RC

Thanks for quick reply. I will try with this solution.
Regards,
RC

How can i create a new transport request?

Dear Experts,
Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
Wilson

Hi,
Please let us know about the issue when you create the new Transport request .
In which system you are creating the request . Hope its in Development .
If so , check the entries are enabled in SCC4 > Changes without automatic recording
Changes to repository objects and cross client customizing allowed .
Protection level 0
If these entries are enabled, you must be able to create Transport requests.
Please check and update .
Regards,
Nibu

Unable to delete Transport Request which contain locked objects

Hi all,
I need to delete some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these transport requests which are released and also provide a solution to delete instead of releasing them.
Thanks in advance,
Sanaz.

Hi,
Thank you for the reply.
1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
2. What are the objects which has been locked and due to that you are facing this problem.
A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
A. I have no idea about "Freight Unit".
Thanks,
Sanaz.

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Problem of calling BAPI to release transport request

Dear Friends,
I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work.
BTW, you can refer table E070.
Could you please kindly give me some idea to solve this problem?
Thank you in advance.
Best regards,
Nick

Dear Li Nick,
The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
Regards, Tino

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

How to delete released transport request

Gurus,
We are doing a system synchronization and for that we are going to make a system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
But in BWQ there are some transports which are already released and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
(For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
So please guide me how to delete these released transports in BWQ.
Thanks
MK

Hi MK,
Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
In this way it only deletes from import queue.
Hope it Helps
Srini

Delete Release transport request

Hi Gurus,
I need to delete a transport request which is already release. Please let me know what is the best way to do that.
Thanks
Liza

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Is it possible to delete a released transport request

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

You can but you have to chnage status of the request:
Use transaction SE38 or SA38 and run program: RDDIT076
Set your request number and run the program
After request is shown double click on it
You should be able to change status from R to D
And now, you can delete the transport for example in transaction: SE10...
Help on ABAP: Few Tips for Transport Request Manipulation

Releasing transport request taking long time

Hi All,
I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
In SM50, i didn't find any processes running.
Can anyone tell me the solution.
Thanks & Regards
Uday

Hi Uday,
>> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
>> In SM50, i didn't find any processes running.
It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
Best regards,
Orkun Gedik

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Remove unnecessary transport requests which are 7 days old

Hi All,
I would like to delete all the un-necessary transport requests which are displayed in STMS which are more than 7 days old.
But, the import log should be available whenever i need to verify.
Is there any script which can do this?
Thanks
Vijay

Hi,
I do have a similiar situation, I would like to write a script to remove transports that have successfully transported and are over 7 days old. In STMS currently we have a list of every transport that has ever been sent and there is no need. Note that via SE10 we still want to see transport history even for old transports just remove the old ones from STMS. Hopefully I feel some script does this job and no idea on this scripts.
Can someone throw light on this and help me out.
Thanks & Regards,
Bharadwaj.

Can't able to release transport request which has process chain information

Similar Messages

Maybe you are looking for