Can't able to update the OPEN STOCK UPDATION in MB1C

Hi,
While posting with MB1C, an error will be appeard as " Period 02/009 is not open for account type S & G/L 799999( this is for semi fin material ) & S & G/L 399999(this is for raw material).
Kindly tell the procedure to solve this problem.
Gobinath J

Hi,
Take the help of your FI consultant, they need to open the period in OB52 for account type S.
Hope the above resolves the issue faced by you.
Regards,
Vivek

Similar Messages

  • I can't able to access the itunes stores to download and update new apps

    iam using iphone4 for more than a six months. but for the last 10days i can't able to access the itunes store to download a app or to update it. what should i do. my itunes is opening properly. i can download videos pictures and songs from my system. the problem is only with itunes stores. i also updated the account information. which also doesnt got solved the problem. what should i do??

    http://support.apple.com/kb/TS1559

  • How to loading the opening stock balance into Infocube 0IC_C03

    Dear Expers,
    I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    (1)original text:
    Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    (see screenshot).
    Question:
    How to find option that upload mode u201CCreate opening balanceu201D?
    i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    Why have infosource in BW 7.X, how to use infosource load data to target?
    Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    Do  I  need to create a  customize ODS?
    Thank you very much , if you will answer me above two questions.
    Best Regards
    Steve

    >
    stevezhuang wrote:
    > Dear Expers,
    >
    > I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    >
    > Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    >
    > (1)original text:
    > Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    > 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    > (see screenshot).
    >
    > Question:
    > How to find option that upload mode u201CCreate opening balanceu201D?
    >  i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    >
    >
    >
    > (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    > Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    >
    > Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    >
    > Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    >
    > Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    > Why have infosource in BW 7.X, how to use infosource load data to target?
    > Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    > Do  I  need to create a  customize ODS?
    >
    >
    > Thank you very much , if you will answer me above two questions.
    >
    >
    > Best Regards
    > Steve
    You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
    YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
    This loading will create your Opening Balance.
    you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
    After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
    Regards,
    RK

  • Can't able to access the duplicate control?

    I have created the duplicate control in tabpage as shown in below code snippet. but i can't able to access the created object.
    Code Snippet
     private void button1_Click(object sender, EventArgs e)
                TabPage newPage = new TabPage();
                foreach (Control c in  tabControl1.TabPages[0].Controls)
                    Control cNew = (Control)Activator.CreateInstance(c.GetType());
                    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
                    foreach (PropertyDescriptor entry in pdc)
                        object val = entry.GetValue(c);
                        entry.SetValue(cNew, val);
                    newPage.Controls.Add(cNew);
                tabControl1.TabPages.Add(newPage);

    Hi Carl,
    Thanks for your update.
    Now I got some idea. But I have one more issue. 
    During button click the I need all the properties in textbox in TabPage1 to the textbox in NewTabPage(refer above image). but later if we change in text in any textbox the replaced text should not reflects the other text.
    E.g: If textbox.text="Microsoft";
    during buttonclick i need the textbox in New Tab Page should be Microsoft. 
    later if I edit the text should not New Tab Page or TabPage1 the text should not reflects from one control to other.
    Regards,
    R.Senthil Kumaran
    Hello,
    I could get what you are dealing with now, and to get that done, I would recommend you use the following way.
    1. Add properties to UserControl, you could define the names of these properties with custom rules.
    public partial class UserControl1 : UserControl
    public UserControl1()
    InitializeComponent();
    public string StrTxtBox1
    get { return this.textBox1.Text ; }
    set { this.textBox1.Text = value; }
    2. Use similar way you shared and edit it to just copy the specific properties.
    TabPage newPage = new TabPage("NewTabPage");
    newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
    foreach (Control c in tabControl1.TabPages[0].Controls)
    Control cNew = (Control)Activator.CreateInstance(c.GetType());
    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
    foreach (PropertyDescriptor entry in pdc)
    if (entry.DisplayName == "StrTxtBox1"|| entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    newPage.Controls.Add(cNew);
    tabControl1.TabPages.Add(newPage);
    In this case, if we have a lot perproties to copy, you could consider capture them by the custom rules you defined at #1 like this one.
    if (entry.DisplayName.Contains("StrTxt")|| entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    Result:
    And if possible, you could consider using this way which just copies the Text , Location or any other property and we don't need to create any usercontrol.
    TabPage newPage = new TabPage("NewTabPage");
    newPage.UseVisualStyleBackColor = tabControl1.TabPages[0].UseVisualStyleBackColor;
    foreach (Control c in tabControl1.TabPages[0].Controls)
    Control cNew = (Control)Activator.CreateInstance(c.GetType());
    PropertyDescriptorCollection pdc = TypeDescriptor.GetProperties(c);
    foreach (PropertyDescriptor entry in pdc)
    if (entry.DisplayName == "Text" || entry.DisplayName == "Location")
    object val = entry.GetValue(c);
    entry.SetValue(cNew, val);
    newPage.Controls.Add(cNew);
    tabControl1.TabPages.Add(newPage);
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can't able to edit the query in query designner

    Hello every one,
                           Please help me in below issue. It is really important.
    Actually i have create the query in the BI- Development and that i pass to the production.
    Now. I tried to again edit the same query in the development , and for that i have create a new request . after creating the requesting i again logged in to the BEx query designner , but still i can not able to edit the query..
    i have create the request in the correct manner. So, what will i do now? Please help me in this.

    HI Gaurav,
                   Again i create a request by below steps
    ->open the ADW by RSA1
    ->go to Transport connection
    ->go to query element - > select my query -> select all necessary query element -> and then click on the truck symbol (i have not create BEx request)
    and then i create the request
    then i open the query in the designer and again i can not able to edit the query
    error is same
    -> BEx transport request is not available or not suitable
    -> choose an existing request
    Now,tell me what can i do? this is really an issue for me and help me to solve..Please all other can also give there comments
    one more thing i want to add is , i have also check the object changabilty , there the query element and all related to query are  "not changable". Is this an issue.
    Edited by: james macwan on Oct 16, 2008 8:39 AM

  • Transaction to see the Open stock transfer order for the plant

    HI ,
    i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
    I need how to cretae the stock transfer order for the material , whci material master is required for this process.
    please give me step by step details for this .
    regards
    satish
    Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

    Hi Satish,
    You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
    Steps for Intra company stock transfer:
    This is only within the comp.code(w/o SD)
    (w/o SD) 351101 MvT. and (with SD) 641101
    1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
    (1 by1 )
    In Receiving plant (1100)
    Customer num. 123345 (for ex.)
    Sales org. yyy
    Dist. Channel yy
    Sales div. y
    In Supplying plant (1000)
    Customer num. -
    (don't fill)
    Sales org. yyy
    Dist. Channel yy
    Sales div. y
    5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
    6.Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries
    Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
    7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide "out bound delivery num".
    10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
    11. See the stock overview in the receiving & supplying plants.
    Steps for Inter company Transfer:
    1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
    2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
    3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
    4)then For your supplying Plant and receiving Plant assign Document type NB
    5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
    6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
    these are the configuration settings you have to do in background.
    Then Create STO from Receiving Plant in ME21N with document type NB.
    Based on that STO, Create Delivery in VL10B from supplying Plant
    Do PGI in VL02N from Supplying plant
    Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
    Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
    Regards,
    Prasath

  • How can i able to see the Task in CWB Administrator page

    Hi Everyone,
    Hope everybody is doing fine !
    Here i'm requesting for help in CWB administrator setup, i have done the CWB setup as required like;
    1. Defined Plan Years
    2. Defined Life Event Reasons.
    3. Defined Plan Type.
    4. Defined Plan. (4.1. Defined Task within Compensation Workbench Tab)
    5. Defined Plan Enrollment Requirements.
    6. Defined Standard Rates.
    7. Run Program "Participation Process: Compensation Workbench"
    8. Found require employees processed sucessfully from log.
    9. Loged in as Manager/Administrator > Open Compensation Workbench Administrator page
    10. Found message "There is no Task for Employee"
    So could anybody please help me, how can i able to see the task work sheet in CWB administrator page.
    Regards
    AshokP

    Hi Avinash,
    Thanks For Your Response,
    I have created task in Plan window (Navigate to Details > Compensation Workbench (Select Task Type) with Full Access.
    So could you please advise me, whether i'm skipping any step as you have been stated like Task needs to be define under 'Plan Enrollment Requirement Window'
    Thanks
    AshokP

  • I can't able to update my billing info with my current credit card number and country.

    I can't able to update my billing info with my current credit card number and country. Please help me out. Thanks!

    For iOS devices and your Mac, instructions here >  iTunes Store: Changing account information
    Make sure you have the correct country selected.
    On iOS tap Settings > Genearl > International > Region Format
    To change the country in the Mac App Store, click the round flag icon bottom right corner of the App Store window.

  • Not able to see the open items in f-53

    Dear All,
    One user has posted some vendor invoices by using the fb60 in 2010 december month.when the user is trying to do the payment by using "f-53" transaction code, the open items are not appearing here. the items are not set blocked.
    We are able to see the open items with over due simble. but not appearing in f-53.
    please any body could help me in this.
    Thanks and regards,
    Mr.Rao
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Jan 6, 2011 4:21 PM

    Hi,
    Check in table REGUP in transaction SE16N, whether this invoice document number is there.
    If yes, you will get the payment run information there and then in F110 you need to process that completely.
    Regards,
    Gaurav

  • How to remove the open stock

    Dearl all,
    I have created PO with QTy 50000 KL and GR has been done for 3000 KL now in MMBE open stock parcular material is showing 2000 KL now i dont want to receive 2000 KL qty, i tried to delete the line item in PO its showing error Msg qty2000 smaller than qty delivered 3000 and i blocked the line item but showing in the open stock (inMMBE) gow to remove it
    please advice me
    points will be rewarded
    Regards
    venu gopal

    Hi
    If you donot want to receive the Further 2000 KL, In the PO item, change the PO order qty to 3000 KL & flag the delivery completed indicator in the PO item
    Thanks & Regards
    Kishore

  • How can I remove items from the open a recent file menue.

    How can I remove items from the "Open a Recent File" menue. Many other applications allow the clearing of that file . Is this possible in Adobe Reader 10.1.2 ? If so how?

    See this previous topic: http://forums.adobe.com/message/3759596
    It is for Acrobat, but the registry entries are similar for Reader.

  • Can we able to see the Work Items status in the BPM Workspace

    HI,
    Can we able to see the work item status in the BPM workspace.
    For exampls, I have create the request as requester then it will go for approval.
    After sometime i login into the workspace can i able to see my request status(it mean where it is like approval1, approval 2)?
    Pls let me know, its possible in the BPM workspace.
    Regards,
    Anandh P

    Hello Anandh,
    You can utilse the filter option of the BPM workspace.
    When you filter the instances you can view the status of all the instances even if they are currently not assigned to the particular user.
    All you need to do is click on the show filter link.
    Select the process from the Filter by: combo box.
    Check the status boxes and click on apply filter.
    You will be able to view the instance even if it is not assigned to you.(Though you will not be able to work on it.)
    If you wish to give custom messages like "pending with HR" or "Pending with Admin" then you need to add a column by creating a project variable and mapping it to the custom view. Then these messages can also be shown on the instances.
    Hope ths helps.
    Regards,
    Jaydev Doshi

  • Can iPhone able to read the external device like card reader or U DISK

    Can iPhone able to read the external device like card reader or U DISK?
    If not can we use SDK3.0 to make this function on iphone UI?

    No.

  • Can't able to access the Jar files which is kept inside the folder.

    Hi,
    I am using the eclipse IDE, my project folder contains the folders src, bin, .metadata, .settings
    if i place the jar file in the same location of the above mentioned folder means i can able to use the Jar file in eclipse(in my project).
    But i create one folder in the same location in the name of Jar or anything and all jar files are placed inside the folder,then i can't able to access the jar file in eclipse(in my project).
    How i can solve this problem?

    RajivGuna wrote:
    ..How i can solve this problem?Put Eclipse aside for the moment and learn how the SDK tools work at the level of the command line, then you will be much better placed to figure how to do it in the IDE. If you are still having problems, I suggest you ask on an [Eclipse forum|http://www.eclipse.org/forums/].

  • Can we able to delete the particular request

    HI,
    We have code for to deleting all request from Database.
    Can we able to delete the particular request from the Database.
    For example, I have request start from 100 to 150.
    If i want to delete the request : 125, is any way we can pull all requests in the dropdown and delete the particular request.
    Pls any one give a suggestion, how can we archive this?
    Regards,
    Anandh P

    Hi Anandh,
    Kevin is right you can use the workspace and use a grab (and then abort) to "delete" the instance.
    It will no longer be running and will be viewed as aborted.
    You can create a custom UI by using the PAPI or PAPI-WS depending on you preferences.
    However if I'm not mistaken there is a third option that is the deletion of instances from the database.
    I believe there is a PL/SQL procedure that can be run to delete all instances from the database. However this isn't limited to a single instances..
    ---( Can someone confirm this.. I'm not sure if this is for BPM or just for SOA Suite?) ---
    Hope this helps.
    Kind Regards,
    Nils

  • I want to click to open the message but it is opening when I select it, and I can't get rid of the open Pane below the messages.

    I want to click to open the message but it is opening when I select it, and I can't get rid of the open Pane below the messages.

    Excellent. Thank you very much...

Maybe you are looking for