Can't acces lion server with Mountain Lion

I upgraded to to Mountain Lion and now its telling me I cannot access Lion Server on this Mac? I was able to access it before the upgrade.

Did you upgrade to the Server version of Mountain Lion? If you did not that explains why you cannot access it. However if you did please repost in the correct forum which is:
https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Similar Messages

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

How can i open my imac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

How can i open my iMac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

Thx for yr reply. maybe i don't express myself very well. i know ML is 64 bit system. and it does not open up my VPN connection (the VPN connection i am talking here is Cisco and it is only in 32 bits) . i was wondering is there a way my macbook air 11 inch first generation can turn back into its original operation system, so that i can use the VPN connection. THX

Can not connect to ftp with mountain lion

Hallo everybody,
i have a problem with my ftp-client, i use cyberduck, i can not connect to any ftp-server...
evertime i get this message:
USER user_xyz
331 User user_xyz OK. Password required
PASS **********
530 Login authentication failed
this will only happen when i try it with mountain lion 10.8.2
with snow leopard and lion everything works fine and i can connect to the ftp-server.
i try to take another ftp-client but its the same... i try filezilla and transmit.
can anybody help me with this problem?

In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
Also, have you contacted the Cyberduck people to ask if they know about a problem?
Have you tried connecting from Terminal?

How can I use apple remote with Mountain Lion? Any Front Row alternative?

Hi All,
I recently upgraded from Snow Leopard to Mountain Lion.
All great except for my Apple Remote control.
Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
Now, as I understand, Front Row is expired.
So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
Any of you Guys know how to restore Front Row?
Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
To restore was easy, but then, no way to launch it.
Any advice will help!
Thanks in advance/all the best.
Marco

Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
I also got the feeling that somehow they want to push Apple TV..
But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
I have choosen apple because I percive it's different.
At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
they do promote the following:
Apple Remote with Mac
The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
Cost for this is 15£ (19€).
Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
So I accomplished twice their wish of selling this product to me.
Why shall they deceive me (and many others, as I read) by killing a still promised service?
Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
Cheers
Marco

Using Oracle 8i client, can I access oracle server with version 10g ?

Hi ,
I am a developer working with C++ and Oracle. In Oracle particularly I am new.
I have some basic Question related to oracle.
1. With Oracle 8i client Can I connect to Oracle server with version 10g?
2. With Oracle 8i client Can I connect to Oracle server with version 9i?
3. With Oracle 9i client Can I connect to Oracle server with version 10g?
4. With Oracle 10g client Can I connect to Oracle server with version 8i?
5. With Oracle 10g client Can I connect to Oracle server with version 9i?
6. With Oracle 9i client Can I connect to Oracle server with version 8i?
These are basic yes/no type question.
Thanks & Reagards
Ravi Bhushan

All answers on Metalink Note:207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions

Safari can't connect to server with parental controls on

I have one user with admin rights and one user plus guest with parental controls turned on. Recently when parental controls are turned on, I get 'safari can't connect to server' error. When I turn parental controls off again I can connect to the internet again. Why is this?

Hi and welcome....
Unfortunately, Parental Controls can only be enabled on a non admin account.
See if there's a proxy set up for Safari. From the Safari menu bar click Safari / Preferences then select the Advanced tab. Click "Change Settings" next to: Proxies.
That will launch System Preferences / Network - Proxies.
If there are any boxes checked under: Select a protocol to configure, deselect the box then click Ok.
Quit Safari (Command + Q) then relaunch Safari.
See if Safari can connect in a parental controlled user account.
Carolyn

I can't acces the internet with (new!) iPhone 4s :(

I bought my iPhone 4s yesterday. I have Wi-Fi conection, but can't acces the internet at my house. My boyfriend can do it with his phone, works fine. I can also acces internet with my macbook. I already changed the wifi settings on my iphone, and reboot, but didn't work who can help me? Maybe it's the router?

That's a possibiliy.
If the router is set to just accept certain MAC-addresses, it might block your iPhone. But in that case, it should not prompt you for the password, it should just refuse connection. Might depend on the type of router, though...
If you log in to the routers admin settings, you can usually enable logging. That can help you to see if the router itself logs that the iPhone is connected or if any error messages pops up on the router side.

Can I use Wiki Server with a custom build of Apache?

Hi there. For various reasons, I may need to roll my own build of Apache, PHP, and some other web technologies. What I'm hoping to do is use Wiki Server for the collaborative part of our site, but I don't know if it can be set up to run with an Apache build other than the one that comes with Leopard.
Can this be done? If so, how?

That could work, I suppose. I take it it's not possible to configure the Wiki Server to work with a different build of Apache?
I'd just as soon not run two Apache instances on our new system; that's what we're doing now, on our Tiger server, and it's a bit inconvenient to have two sets of web configuration settings to worry about.
If possible, I'd like to use the Wiki server with a custom Apache build. (I need to rebuild PHP, you see...)

Safari "Can't connect to server" with parental controls enabled

Safari says "Can't connect to server" when my childrens' accounts have parental controls enabled. Is there a way to enable parental controls on the administer's account??

Hi and welcome....
Unfortunately, Parental Controls can only be enabled on a non admin account.
See if there's a proxy set up for Safari. From the Safari menu bar click Safari / Preferences then select the Advanced tab. Click "Change Settings" next to: Proxies.
That will launch System Preferences / Network - Proxies.
If there are any boxes checked under: Select a protocol to configure, deselect the box then click Ok.
Quit Safari (Command + Q) then relaunch Safari.
See if Safari can connect in a parental controlled user account.
Carolyn

How can I print two-sided with Mountain Lion and an Epson WF-2540?

I just purchased an Epson WF-2540 printer with two-sided printing capabilities. The manual includes easy to follow instructions on doing this with a PC. However, it doesn't seem to be present in OSX Mountain Lion (10.8.4). I have looked all over for the answer, but nothing helps with this specific problem. It seems like, before Mountain Lion, there was a simple check-box within system preferences>print and fax>options and supplies>drivers that said "duplexer." Now, that option is not present. I would love to be able to use this function on my new printer. Thanks for all of your help!

I have the answer ...
The Epson WF-2540 does not appear to be a two-sided printer!
Reference this article:
http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=C11CC36 201
The following is extracted from that article:
There is no reference anywhere in what I've shown or the rest of the article to two-sided printing.
Compare that to my Epson Workforce 645, which is a two sided printer. Here's what it says in the Epson writeup:
... and indeed my options under the Layout dropdown menu look a lot different from yours, and from there I can choose two sided (whether I've attached as AirPrint or not, by the way).

Can't print from mini with mountain lion to To printer being shared on ppc with 10.5.8

Since installing mountain lion on my mini, I cannot print to my shared printer connected to my iMac running 10.5.8. Works fine from another iMac with 10.5.8.

OK, here's more info
The printer is a Canon MP160 that is connected via USB to 17" imac running OS 10.5.8. After installing Mountain Lion on the Mac Mini, I cannot print to that shared printer on my network. I can add the printer to the mini but when i try to print, i see the file in the print queue on the mini, and it processes and looks normal but there is no activity on the imac and nothing prints.
This worked perfectly with previous operating systems, ie snow leopard and then lion. I have done everything I could do to fix this including resetting the printing system on both computers.
I tested the shared printer from another imac that i have that is running 10.5.8 also and it works perfectly.

I have no recovery HD, tried installing Mavericks and now i can't acces lion either so I'm stuck with no OS.

Hello, im really mad and desperate.
Was in lion and needed xcode 5 so I downloaded mavericks installer
Double clicked mavericks and began installation
I wanted to install over lion with no backups, had no important files already left.
Installation failed for some reason.
Now everytime i boot my mac, the os x maverick installer shows up, but i cant select lion (i have 3 disks available for install none of which are candidates, since one is bootcamp , im here now, and the others are disk04 and disk06 iirc)
I don't have recovery HD, when holding down option in boot I ONLY SEE MAVERICK OS X INSTALLER AND BOOTCAMP OPTIONS , i have tried cmd R, holding alt, etc and I CAN'T IN ANY WAY ERASE, RESTORE OR WHATEVER lion hd.
I was able however to boot lion in safe boot mode, but that's no use since its really slow and buggy. I need answers, I don't want to buy another HD for something that Apple advertises as "Just download and install" which completley ruined my mac.

In that case you can do Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This will install Lion since that was the version pre-installed on your computer. From there you can upgrade to Mavericks.

Lion Server with mountain lion computers?

Hello,
So i am running a mac pro 1.1 with Lion server because it won't run mountain lion, I am thinking about upgrading my other computers to mountain lion are there any issues or features that aren't availible or will be problematic?
Thanks

The difference between case 1 and cases 2-4 are that in 1 the client is letting the server expand the group membership, and in 2-4 it's the client doing that expansion. The group members returned by the server when it expands the group are "guaranteed" to work because the server definitely knows about them (and providing them to the client). In the cases where it's the client adding the attendees, I suppose there must be some mismatch sometimes, although I don't know what that could be if the email addresses are the same between the users you've created via Contacts.app and the users you've created via Server.app.
I actually tried this setup and it was working fine. What caused you to want to duplicate the users and groups that you have in Server.app into Contacts.app?

HT6104 Can I use Safari 7 with Mountain Lion?

I have Mountain Lion OS on my MacBook Pro but Safari 6.0.5 is not working well with some websites. Can I use Safari 7 without upgrading to Mavericks?

No.
(123333)

Can't acces lion server with Mountain Lion

Similar Messages

Maybe you are looking for