Can't Acces VM neither via browser nor ssh

I have one instance of gitlab created via vm-depot and it was wornking very fine for some months. Then it suddenly stopped. I can't access it via browser and ssh neither and it has a lot of important projects saved that i don't wanna lose. I checked the
endpoins and they are ok. I also tried to reboot and set it to a smaller size but it did't work... I don't know what to do, please help me.

Hi,
You might want to recreate the VM by deleting the existing VM and retaining the attached disk. You can then attach the same to the new VM.
Recovery Steps can be Scripted or Manual. To perform the same, suggest you to have a look at the below article
http://blogs.msdn.com/b/mast/archive/2014/11/20/recovering-azure-vm-by-attaching-os-disk-to-another-azure-vm.aspx
Hope this helps !
Regards,
Sowmya

Similar Messages

My first generation iPad no longer recognized in iTunes, neither via usb nor wi-fi. Did all the steps recommended in Apple iPad support. Now what?

My first generation iPad is no longer recognized in iTunes. It just doesn't show up neither via USB nor via wi-fi.
I've checked the usb connection and cable and its OK.
I checked that iTunes is up to date on my Mac.
I reinstalled iTunes on my Mac.
I restarted my Mac,
I've restarted my iPad.
The iPad has IOS 4.3.1 (8G4) installed. And without the iPad being recognized in iTunes I can not update the IOS nor apps, nor remove unneeded photos. The iPad is completely filled up, no memory left to allow even updates via cellular or via wi-fi.
Trying to gain access to update the IOS and to update APPS and to remove the pics I already have backed up and do not need on this iPad locally.
PS: I even tried to connect the iPad to a different Mac and it was not seen in that iTunes either.
So, what can I do now?
Any suggestions besides using it as a paper weight?
Thanks

Hello there, Blueye3355.
The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
Apple - Support - iPad - iTunes Assistant
http://www.apple.com/support/ipad/assistant/itunes/
If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Can we launch Crystal Report via Browser?

Hi, Experts
I have created a Balance Sheet report (T-Style) with the help of BOBJ-Crystal Reorts.
But I wanna to consume this report via Browser, neither email with PDF/Excel attached, nor Crystal Report 2008 designer.
Is there any solution/tool to make this happen?
How can I implement it?
Thanks a lot.
Peter Zhou

You are able to view Crystal Reports via a browser in a few ways.
1. Report is published to Enterprise and you use Infoview to browse to the report and view.
2. Report is published to Enterprise and you use a custom application written in .NET/JAVA to view the report, loading it from your enterprise server.
3. Report is stored on disk and you use a custom application written in .NET/JAVA to view the report.
For viewing in a custom application please visit [diamond.businessobjects.com|http://diamond.businessobjects.com/]
The documentation for the SDK's can be found in the Developer Library, and sample code can be found under the Sample Code.

Is it possibil that user can create themselve in ABAP via browser ?

Is there a possibility to create users in sap automatically via browser or else?
Because I want that user can create themselve via browser.

Yes it is possible.
In addition to syncronizing users (for example with an Active Directory) there is also the possibility to use a self-registration scenario.
If you could explain the context (e.g. ESS, Internet facing Webshop, Portal, internal ITS) then we will be able to give you better advise. Your question is very vague.
Cheers,
Julius

Can't view shared images via browser

I use an old version of Skype, and I do not want to update. Whenever somebody sends an image via Skype, I see this message:
<user> sent a photo.
This device doesn't support Skype's new photo sharing features yet, but you can still view it in your browser here:
https://api.asm.skype.com/s/i?[...]
When I go to the link, it asks me to log into Skype, when I login, I see a page saying "Sorry, we were unable to open this photo. Try signing into Skype again.". No matter how many times I log in again, it still shows this message.
Please help.
Thank you.

Mateon1 wrote:
ruwim wrote:
Images sent from the latest Skype versions on Windows, Mac or smartphones, are transferred now using the new Cloud-based mode. This means that they are not send directly to the recipient, but saved on a Cloud server.
If the recipient is also using one of the latest Skype versions (on Windows it must be 6.21 or later), a preview of this image will be displayed in the chat window.
On older Skype versions, only a link (similar to the one as you are seeing) to this image saved on the Cloud server is displayed.
Theoretically, clicking on this link and signing in with your Skype account should display this image in your browser.
If this was not the case, then the image might have been corrupted or there is an issue with your browser. What browser have you used to open this link?
I use Google Chrome, the latest beta version (40.0.2214.85 beta-m). I find this unlikely that this particular image is corrupted, because I can view it with Skype on my phone, and this issue happens with all images shared via Skype, as far as I can tell.
I have not tried to open the image links in Chrome, but it works with both Firefox and Internet Explorer.
Make sure that you have the latest IE version installed on your computer and try to open this link in IE.

After Ver 4.2.1 - Can't sync bookmarks, neither by MobileMe nor iTunes

My Safari bookmarks are gone and I can't sync. When I sync with MobileMe, nothing happens and the rotating syncing symbol goes forever. When I sync with iTunes I get an error that it can't sync because "the bookmarks are in use by the iPad". But they are not.
I've powered off, changed the MobileMe sync on/off several times, removed the bookmarks on the iPad, etc. Calendars, eMail, and Address book sync with no problem.
Any suggestions?

I started having this same problem a few days ago, intermittently, but now it seems to have gotten worse. My 6-year-old Powerbook is still running 10.4, so I can't update to iTunes 10, and therefore can't update to iOS 4.2 (thanks, Apple). I also tried restoring my phone but got the "This device isn't eligible for the requested build" error. Finally, I tried switching my phone to 2G mode after searching around a bit and that worked-- I can at least make calls, but that doesn't solve my 3G problem...anyone have any ideas? Irritating...

Why I can't connect to Oracle Enterprise Manager via browser after install?

I've installed Oracle9iAS Release2(9.0.2) with Windows 2000 server (servicepack3) and Oracle9i database on the same host.After installation, I can use Oracle enterprise manager(via browser) by connect as "ias_admin" and "12345" for password (It's a password that I input at installing). But 2 days later, I cannot connect it!, what's happen to my 9iAS. I try to change my password in command line by "emctl set password <old_pwd> <new_pwd>, But I've got a message that is incorrect password. By the way, I use command line to start OC4J and HTTP Server instead. Please help me for this problem. Thank you very much.
Ps. I've got this problem for 2 time, but the first time I delete all of oracle products and install it again .

If you have installed the Oracle AS 10.1.3 using an Apache in front the default port is 7777 as far as I know.
You wrote that the main page is accessible, that's why I would suspect that you might have a problem with your hostname. Are you accessing the mainpage via the full qualified hostname or via ip?
Please ensure that you can reach the server using the full qualified hostname!
If you are not sure about it, add an entry to your local hosts-file.
Please tell us if this was your problem!
Regards,
Eric

HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
And then try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
And ... Are you using the mobile YouTube website?
http://m.youtube.com/home

I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new passw

I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new password does not match. What to do?

If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information. Note: this only deletes the account and any synced data from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

[solved] pacman can't acces repositories, but my web browser does

Hi,
there is a strange problem. Today I tried a pacman -Syu to update, but pacman can't acces my repositories. Gives me errors of
error: failed retrieving file 'core.db' from mirror.archlinux.ro : No address record
I tried different mirrors, change the protocol from ftp to http, but without result. The strange think is that I can access those repositories with my web browser, so I think that it is pacman or python problem.
My last entries in pacman's log are
[2011-04-09 15:51] Running 'pacman -Syu'
[2011-04-09 15:51] synchronizing package lists
[2011-04-09 15:51] starting full system upgrade
[2011-04-09 15:52] upgraded audacious-plugins (2.4.4-2 -> 2.4.4-3)
[2011-04-09 15:52] upgraded libgpg-error (1.9-2 -> 1.9-3)
[2011-04-09 15:52] upgraded libgcrypt (1.4.6-1 -> 1.4.6-2)
[2011-04-09 15:52] upgraded gnutls (2.10.5-1 -> 2.12.2-1)
[2011-04-09 15:52] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-04-09 15:52] upgraded kdebase-workspace (4.6.2-1 -> 4.6.2-2)
[2011-04-09 15:52] upgraded xproto (7.0.20-1 -> 7.0.21-1)
[2011-04-09 15:52] upgraded libx11 (1.4.3-1 -> 1.4.3-2)
[2011-04-09 15:52] upgraded pycups (1.9.54-1 -> 1.9.55-1)
[2011-04-09 15:52] upgraded taglib (1.6.3-1 -> 1.7-1)
[2011-04-09 15:52] upgraded xdg-utils (1.1.0rc1-1 -> 1.1.0rc1-2)
[2011-04-09 15:52] upgraded xextproto (7.1.2-1 -> 7.2.0-1)
[2011-04-09 16:16] Running 'pacman -S k3b'
[2011-04-09 16:17] installed libdiscid (0.2.2-1)
[2011-04-09 16:17] installed libmusicbrainz3 (3.0.3-1)
[2011-04-09 16:17] installed kdemultimedia-kioslave (4.6.2-1)
[2011-04-09 16:17] installed openjpeg (1.3-3)
[2011-04-09 16:17] installed ffmpeg (20110330-1)
[2011-04-09 16:17] installed libao (1.1.0-1)
[2011-04-09 16:17] installed cdrdao (1.2.3-5)
[2011-04-09 16:17] installed cdrkit (1.1.11-1)
[2011-04-09 16:17] installed k3b (2.0.2-1)
[2011-04-09 16:17] Running 'pacman -S dvd+rw-tools'
[2011-04-09 16:20] installed dvd+rw-tools (7.1-2)
After this, it stopped working - I mean I can't download a thing with pacman, no updates, no packages.
Last edited by inp3dance (2011-05-04 22:37:00)

pacman -Syu --debug output:
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: Architecture: i686
debug: config: new section 'core'
debug: registering sync database 'core'
debug: config file /etc/pacman.conf, line 65: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'core': http://mirror.archlinux.ro/archlinux/core/os/i686
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: config file /etc/pacman.conf, line 68: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'extra': http://mirror.archlinux.ro/archlinux/extra/os/i686
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: config file /etc/pacman.conf, line 74: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'community': http://mirror.archlinux.ro/archlinux/community/os/i686
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: adding new server URL to database 'archlinuxfr': http://repo.archlinux.fr/i686
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: database path for tree local set to /var/lib/pacman/local/
debug: local database version 2
debug: destfile found, using mtime only
debug: using 'core.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'core.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update core (No address record)
debug: destfile found, using mtime only
debug: using 'extra.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'extra.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update extra (No address record)
debug: destfile found, using mtime only
debug: using 'community.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'community.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update community (No address record)
debug: destfile found, using mtime only
debug: using 'archlinuxfr.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'archlinuxfr.db' from repo.archlinux.fr : No address record
debug: failed to sync db: No address record
error: failed to update archlinuxfr (No address record)
error: failed to synchronize any databases
debug: unregistering database 'local'
debug: unregistering database 'core'
debug: unregistering database 'extra'
debug: unregistering database 'community'
debug: unregistering database 'archlinuxfr'
pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
My mirrorlist is the default one, I have enabled only one mirror at a time, be it the Hungarian one or one of the Romanian mirrors, depending in which country I am.

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
https://discussions.apple.com/docs/DOC-2491
MtD

My new ipod touch doesn't appear neither in Itunes nor in browser

my new ipod touch doesn't appear neither in Itunes nor in browser
I have done everything explained on ipod website in vain...
Could you please help me ?

Here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Neither AP Utility nor Set-up can locate my AP Extreme

I have done a hard reset on two AP Extremes - neither Admin Utility nor Set-up Assistant can locate the base stations. They find the network, but no base station. It's tough to configure the airport if you cannot access it.
I brought the stations into the Genius Bar and the computer there had no problem locating these stations. When I tried at home I was able to bring them up once, but only once. I continually get the" unable to locate message."

If you simply cable your Mac directly to the ethernet LAN port (the port labelled with the double headed arrow icon) of one of the Base Stations, your Mac running the Airport Admin Utility should have no trouble "seeing" the Base Station. If it still doesn't - make sure you have disabled (or better still, uninstalled) any non-Apple firewall software running on the Mac. Turn off the MacOS firewall as well in System Preferences->Sharing->Firewall. If you still have trouble, do a hard reset of the Base Station and try the above again.

Can't Acces VM neither via browser nor ssh

Similar Messages

Maybe you are looking for