Can't access a VM within oracle VM server

dear team,
This is the first time i use the OVM and we are planning to sell it to our customer but we are facing issues which prevent us to go further; here is a summary of the architecture as well as the issue:
1) the OVM 3.2.1 is installed on an Intel server (H/W based) with 2 network cards
2) the first network card is used for management purposes
3) the second network card is created using "bonds/ports only", with the network name "My Network", and dedicated for "Network Virtual Machine" in order to be used by the VMs to access the external network; the IP used is 192.168.17.117 (subnet 255.255.240.0)
4) 2 VMs created using OEL 6 with the IPs 192.168.19.33 and 192.168.19.34 with the same subnet 255.255.240.0
5) the 2 VMs are "pingable" between each other but couldn't be "pingable" from outside (neither from the VMs to outside) although the VNIC are attached to the network described in the point 3.
As stated in the point 5, the VMs are unreachable from outside the OVM.
could you please provide me your feedback in this regard.
Thanks in advance for your assistance.
Elie

user_Elie77 wrote:
thanks for your reply.
well in fact, No i'm not using any gateway neither for the VMs nor for the OVM server since all the IPs are on the same subnet.
Edited by: user_Elie77 on May 20, 2013 12:30 PMI was going over your ip scheme, you're using a 192.168.19 network for your vm and a 192.168.17 for your OVS. Are you using VLANSs?
If tagged they should going to a DG (default gateway if they want to access another subnet). Also unless you intend to use CIDR just use 255.255.255.0
Forgive me if I'm wrong.

Similar Messages

Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

Hi there,
We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
Anyone can help ?
Thanks a lot
-toni

Did you define Roles and Permissions to the shared folder from BIP Admin?
-Prakash

How can i access the stepname within a steps post-expression?

How can i access the stepname within a steps post-expression?
i only saw the step-id of the step: Step.TS.Id
is there a pssibility to get the stepname from the id?
thank you!

Hi Fischer,
use the expression NameOf(Step).
Regards
Ray Farmer
Regards
Ray Farmer

Can free online books be downloaded to memory of ipad2 so that book can be accessed when not within wi-fi range

can free online books be downloaded to memory of ipad2 so that book can be accessed when not within wi-fi range

It depends on what books you're referring to. All books from the iTunes Store are downloaded to your iPad and except for any special features the book may contain that requires an Internet connection will be readable without such a connection.
If you're talking about books from some other source, we'd need to know the source before we could offer opinions.
Regards.

Can any one help me sending Oracle application server Cloning document 9.0.4 version

Can any one help me sending Oracle application server Cloning document 9.0.4 version (Mail id removed by moderator)
Many Thanks in advance
Deepak

Hi Deepak,
In first place application server 9.0.2 is desupported since 30th June 2007.So oracle would always recommend its customer to be on the latest versions.
Please follow the below URL for cloning Appplciation Server 9.0,.4
Cloning Application Server Middle-Tier Instances
Regards,
Prakash.

Can't access tables in other Oracle database schemas

Hi. We got our Oracle database admin to install APEX in our Oracle database. She created a login and schema for my Oracle database user so that I could work with APEX a little. Here's the information on the version of APEX we have installed:
Database Version Information
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I've found that my user is only able to access Oracle tables within my own Oracle database schema. Most of our main tables are in 3 other schemas and I'd need access to all tables in all these schemas. Right now whenever I encounter a drop list of values for Schema, only by own schema is available in the list of values.
Is there something our Admin can do to make these tables in other schemas available to my user account?

Sharpe,
This documentation should point you in the right direction. It will show you how to add multiple schemas to a workspace.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21678/adm_mg_wrkspc.htm#CHDBDCCJ
Cheers,
Tyson Jouglet

Can't Access Public Folders Within Outlook, But Can Through Web Access

Hi all,
I have an Exchange 2010 Server (V14.02.0387.000) with clients using Outlook 2007-2013. Until recently all users could access all public folders without issue. However, since moving the location of the public and private mailboxes on the server (to new drives
with more space and defragging etc), a number of users are unable to access the public folders, getting error "Cannot expand the folder. the attempt to log on to Microsoft Exchange has failed". However, when they log in through Outlook Web Access,
they can view the public folders without issue.
I've tried restarting all the Exchange services, as well as multiple reboots of the server.
Many thanks in advance.
Bob

I'm going to start with some general advice. Don't bother running ESEUTIL anymore to reduce database sizes. If you find you need to do that, simply create a new database, move all the mailboxes to it, and then delete the old database.
If you created a new public folder database, did you change the mailbox databases to point to it using Set-MailboxDatabase -PublicFolderDatabase?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Anyconnect can only access some IP within a block

I have strange behaviour on the when connecting over Anyconnect to the ASA. I can access some of the cisco equipment on the network like the core switch on 10.2.15.254.
I particularly can't see the 10.1.1.0 network...
any hints would be most welcome, bound to have done something silly.
ASA Version 8.6(1)2
hostname myasa01
domain-name company.internal
enable password encrypted
passwd encrypted
names
name 10.2.0.0 Data_Net
name 10.0.0.0 Voice_Net
name 10.1.1.58 jab.my-domain.com
interface GigabitEthernet0/0
no nameif
no security-level
no ip address
interface GigabitEthernet0/0.30
vlan 30
nameif server
security-level 100
ip address 10.1.1.1 255.255.255.128
interface GigabitEthernet0/0.40
vlan 40
nameif manageNet
security-level 100
ip address 10.1.4.1 255.255.255.0
interface GigabitEthernet0/0.50
description DMZ VLAN
vlan 50
nameif DMZ
security-level 90
ip address 10.1.1.254 255.255.255.128
interface GigabitEthernet0/0.100
vlan 100
nameif data
security-level 100
ip address 10.2.0.1 255.255.240.0
interface GigabitEthernet0/0.101
vlan 101
nameif voice
security-level 100
ip address 10.0.0.1 255.255.255.0
interface GigabitEthernet0/0.108
vlan 108
nameif guestwifi
security-level 80
ip address 172.31.0.1 255.255.255.0
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
no nameif
no security-level
no ip address
interface GigabitEthernet0/4.88
description Public VLAN 88 2.2.2.0/28 to HKBN Router
vlan 88
nameif outside1
security-level 0
ip address 2.2.2.2 255.255.255.240
interface GigabitEthernet0/5
description To HGC Broadband
nameif outside2
security-level 0
ip address 3.3.3.3 255.255.255.240
interface Management0/0
shutdown
nameif management
security-level 100
no ip address
management-only
boot system disk0:/asa861-2-smp-k8.bin
ftp mode passive
clock timezone HKST 8
dns domain-lookup server
dns server-group DefaultDNS
name-server 10.1.1.15
name-server 10.1.1.10
domain-name company.internal
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network DMZ
subnet 2.2.2.0 255.255.255.240
object network data
subnet 10.2.0.0 255.255.240.0
object network server
subnet 10.1.1.0 255.255.255.128
object network voice
subnet 10.0.0.0 255.255.255.0
object network VPN_user
subnet 10.68.1.0 255.255.255.0
object network web_server
host 10.1.1.19
object network web_server_outside
host 2.2.2.3
object service http
service tcp source eq www destination eq www
object network mail_server
host 10.1.1.129
object service ssh
service tcp source eq ssh destination eq ssh
object service smtp
service tcp source eq smtp destination eq smtp
object service pop
service tcp source eq pop3 destination eq pop3
object service https
service tcp source eq https destination eq https
object service port465
service tcp source eq 465 destination eq 465
object service port587
service tcp source eq 587 destination eq 587
object service port993
service tcp source eq 993 destination eq 993
object network jabber_server
host 10.1.1.58
object network jabber_server_outside
host 2.2.2.4
object network mail_server_outside
host 2.2.2.5
object network vcse_server
host 10.1.1.193
object network vcse_server_outside
host 2.2.2.6
object network external_ip
host 2.2.2.7
object network NETWORK_OBJ_10.2.16.0_24
subnet 10.2.16.0 255.255.255.0
object-group service jabber
access-list split-tunnel standard permit 10.1.1.0 255.255.255.128
access-list split-tunnel standard permit 10.2.0.0 255.255.240.0
access-list 100 extended permit tcp 10.0.0.0 255.255.255.0 host 10.1.1.58 eq 2000
access-list outside_access_in extended permit tcp any object web_server eq www
access-list outside_access_in extended permit tcp any object mail_server eq www
access-list outside_access_in extended permit tcp any object mail_server eq ssh
access-list outside_access_in extended permit tcp any object mail_server eq smtp
access-list outside_access_in extended permit tcp any object mail_server eq pop3
access-list outside_access_in extended permit tcp any object mail_server eq https
access-list outside_access_in extended permit tcp any object mail_server eq 465
access-list outside_access_in extended permit tcp any object mail_server eq 587
access-list outside_access_in extended permit tcp any object mail_server eq 993
access-list outside_access_in extended permit udp any object jabber_server range 16384 32766
access-list outside_access_in extended permit tcp any object mail_server eq imap4
access-list outside_access_in extended permit tcp any object jabber_server eq www
access-list outside_access_in extended permit icmp any object jabber_server echo-reply
access-list outside_access_in extended permit icmp any object jabber_server time-exceeded
access-list outside_access_in extended permit udp any object jabber_server eq tftp
access-list outside_access_in extended permit tcp any object jabber_server eq sip
access-list outside_access_in extended permit tcp any object jabber_server eq ctiqbe
access-list outside_access_in extended permit tcp any object jabber_server eq ldap
access-list outside_access_in extended permit tcp any object jabber_server eq ldaps
access-list outside_access_in extended permit tcp any object jabber_server eq 3268
access-list outside_access_in extended permit tcp any object jabber_server eq 3269
access-list outside_access_in extended permit tcp any object jabber_server eq imap4
access-list outside_access_in extended permit tcp any object jabber_server eq 7993
access-list outside_access_in extended permit tcp any object jabber_server eq 8080
access-list outside_access_in extended permit tcp any object web_server eq https
access-list outside_access_in extended permit tcp any object jabber_server range 2000 2050
access-list outside_access_in extended permit icmp any object jabber_server unreachable
access-list outside_access_in extended permit ip any object jabber_server
access-list outside_access_in extended permit tcp any object web_server eq imap4
access-list outside_access_in extended permit tcp any object web_server eq 144
access-list outside_access_in extended permit tcp any object web_server eq 5800
access-list internal_access_out extended permit ip any any
access-list internal_access_out extended permit udp any any
access-list internal_access_out extended permit tcp any any
access-list internal_access_out extended permit icmp any any
pager lines 24
logging enable
logging buffer-size 512000
logging buffered informational
logging asdm informational
mtu server 1500
mtu manageNet 1500
mtu DMZ 1500
mtu data 1500
mtu voice 1500
mtu guestwifi 1500
mtu outside1 1500
mtu outside2 1500
mtu management 1500
ip local pool vpn_ip 10.2.16.0-10.2.16.250 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-66114.bin
no asdm history enable
arp timeout 14400
nat (data,outside2) source dynamic any interface
nat (server,outside2) source dynamic any interface
nat (DMZ,outside2) source dynamic any interface
nat (server,outside1) source dynamic any interface
nat (DMZ,outside1) source dynamic any interface
nat (guestwifi,outside1) source dynamic any interface
nat (data,outside1) source dynamic any interface
nat (data,outside1) source static any any destination static NETWORK_OBJ_10.2.16.0_24 NETWORK_OBJ_10.2.16.0_24 no-proxy-arp route-lookup
object network web_server
nat (server,outside1) static web_server_outside
object network mail_server
nat (DMZ,outside1) static mail_server_outside
object network jabber_server
nat (server,outside1) static jabber_server_outside
object network vcse_server
nat (DMZ,outside1) static vcse_server_outside
access-group internal_access_out out interface server
access-group internal_access_out out interface DMZ
access-group internal_access_out out interface data
access-group outside_access_in in interface outside1
access-group outside_access_in in interface outside2
route outside1 0.0.0.0 0.0.0.0 2.2.2.9 1 track 1
route outside2 0.0.0.0 0.0.0.0 3.3.3.4 254
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http Data_Net 255.255.240.0 data
http 10.1.1.0 255.255.255.128 server
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=myasa01
proxy-ldc-issuer
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 1c514351
    : SNIP SNIP!
   6f420613 87069234 595bb589 4d6dc051 1042dea0 94c2
quit
track 1 rtr 123 reachability
telnet Data_Net 255.255.240.0 data
telnet timeout 60
ssh 10.1.1.0 255.255.255.128 server
ssh Data_Net 255.255.240.0 data
ssh timeout 5
console timeout 0
management-access data
threat-detection basic-threat
threat-detection statistics host number-of-rate 2
threat-detection statistics port number-of-rate 2
threat-detection statistics protocol number-of-rate 2
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server 10.2.15.254
ssl encryption 3des-sha1 aes256-sha1 rc4-md5 rc4-sha1
ssl trust-point ASDM_TrustPoint0 outside1
webvpn
enable outside1
anyconnect-essentials
anyconnect image disk0:/anyconnect-macosx-i386-3.1.02026-k9.pkg 1
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 2
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 10.1.1.15 10.1.1.13
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client ssl-clientless
default-domain value company.internal
group-policy "GroupPolicy_company HK" internal
group-policy "GroupPolicy_company HK" attributes
wins-server none
dns-server value 10.1.1.15 10.1.1.10
vpn-tunnel-protocol ssl-client
default-domain value company.internal
username frances attributes
vpn-group-policy GroupPolicy_MH2
service-type admin
username admin password boooooooooooooo encrypted privilege 1
all user acount names have been deleted from this post.
tunnel-group MH2 type remote-access
tunnel-group MH1 type remote-access
tunnel-group "company" type remote-access
tunnel-group "company" general-attributes
address-pool vpn_ip
default-group-policy "GroupPolicy_company"
tunnel-group "company" webvpn-attributes
group-alias "company" enable
class-map mgcp_port
match access-list 100
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map type inspect mgcp voip
parameters
call-agent 10.1.1.57 1
call-agent jab.my-domain.com 2
gateway 10.0.0.2 1
command-queue 150
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect mgcp
inspect icmp
class class-default
user-statistics accounting
policy-map inbound_policy
class mgcp_port
inspect mgcp voip
service-policy global_policy global
service-policy inbound_policy interface server
service-policy inbound_policy interface voice
prompt hostname context
no call-home reporting anonymous
: end

Hi,
You have configured majority of your NAT rules in Section 1 of the NAT
nat (data,outside2) source dynamic any interface
nat (server,outside2) source dynamic any interface
nat (DMZ,outside2) source dynamic any interface
nat (server,outside1) source dynamic any interface (This command was previously probably causing problems)
nat (DMZ,outside1) source dynamic any interface
nat (guestwifi,outside1) source dynamic any interface
nat (data,outside1) source dynamic any interface
What Javier suggested was to create the NAT rule at the very top of the NAT rules. Notice the number "1" which defines the order number for the NAT rule. This makes sure that the NAT for the VPN is always checked first instead of the long list of Dynamic NATs.
- Jouni

How Can I access a file within that is part of my jpx

The file is part of my JPX but I don't know how to access it.
I use the following code for images
ImageIcon backImage = new ImageIcon(OpeningUI.class.getResource("myImage.gif"));This doesn't work.with BufferReader because the constructor doesn't accept a URL
if I use this
BufferedReader input = new BufferedReader(new InputStreamReader(
            new FileInputStream("Agreement.txt")));I get this FileNotFoundException:
Agreement.txt (The system cannot find the file specified)
Please Help
thanks.

I'm getting a NullPointerException now.
Agreement.txt is definatly part of my JPX.
Here's the Code if it will help
private void readFile() throws FileNotFoundException, StreamCorruptedException, IOException    {
        BufferedReader input = new BufferedReader(new InputStreamReader(
            new FileInputStream(getClass().getResource("Agreement.txt").getFile())));
            //new FileInputStream("Agreement.txt")));
        //DataInputStream input = new DataInputStream(new FileInputStream("Agreement.txt"));
        boolean bEof = false;
        String sDisplay = "";
        do {
            try {
                sDisplay += input.readLine();
                System.out.println(sDisplay);
            catch(EOFException eofe) {
                bEof = true;
                System.out.println(eofe.getMessage());
            catch(IOException ioe) {
                bEof = true;
                System.out.println(ioe.getMessage());
        }while(!bEof);
        txtAgreement.setText(sDisplay);
        input.close();
        System.out.println(sDisplay);
    }

Can't access UIViewRoot from within constructor

the subject actually says it all: When trying to get the locale over getViewRoot().getLocale the first method returns null. in any other method everything is working. how can i get the viewRoot or load the current locale respectively in the constructor?
thanks!

Can't reproduce this problem. It works fine here with latest JSF 1.2.
Backing bean (request scoped):
package mypackage;
import javax.faces.context.FacesContext;
public class MyBean {
    private String value;
    public MyBean() {
        value = FacesContext.getCurrentInstance().getViewRoot().getLocale().toString();
    public String getValue() {
        return value;
}JSF page:
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<!doctype html>
<f:view>
<html>
    <head>
        <title>Test</title>
    </head>
    <body>
        <h:outputText value="#{myBean.value}" />
    </body>
</html>
</f:view>Output:
nl_NL

Can't access the content on my website server

I recently installed an Airport Extreme router in place of a Linksys wired router. I access two outside servers connecting with FTP Transmit - one server is my local ISP on which I have 5 mg personal space and I can access this still with no problem. I also have space for my club website on another server (which I am told is probably more secure than my ISPs) and since installing Airport Extreme I am no longer able to access the files in order to update the content.
I was able to access this server from my local library's Wi Fi so feel it must be the new router which is causing the problem.
Does anyone know what settings I could change to remedy this problem?

Problem resolved. AE was disabled and Airport Utility said resolution was to install update 7.5.2 which I had not done because of all the negative postings here. Didn't have much choice so installed update. Was immediately able to access my club website server!!

Can't access internet-unable to contact DHCP server?

Help! i'm a total computer flunkie so please not too much computer jargon-my husband accidentally cut our phone line which cut out our DSL and when he respliced it the internet started working on our builtin wireless laptop but not on our desktop that is using the WRT54G wireless router and compact Wireless G USB adapter. None of our computers are near our phone line. I tried to renew IPconfig through CMD screen but it gives me this error: uable to contact your DHCP server. Request has timed out. I tried reinstalling the adapter but that didn't work. Do I need to change something on the router by connecting our laptop to it? Please help!! This is driving me crazy Thanks!

Go to your device manager (Right click My Computer, then click Properties, then device manager should be under hardware tab), check and make sure your wireless adapter driver is installed well.
Then access to your router's web management page, ensure that the DHCP setting is set correctly. Might try to reboot your router after that. Finally try to acquire the IP address from your desktop computer again.
You can also try to assign the IP, netmask, gateway, DNS manually on the desktop computer if still failing to get the IP from DHCP server.
Hope helps..
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

I can't access a shared file on remote server

I can connect to a windows 2003 server through the VPN but I can't find the shared folder any where? I can see the Printers and fax machine through the web browser. I've only had my mac for a week but I really need to get to my work files!

I find it astonishing that you can see remote printers and fax machines through your web browser, but that's a different issue.
Even though you're on the VPN and connected to the office network, there is no support for auto-discovery over the VPN connection. In other words, the OS won't go out and look for available servers/shares in the VPN network.
In order to connect to remote shares you'll need to know the server and share name which you can then enter into the Finder's Go -> Connect to Server dialog in the form smb://server/sharename (assuming you're using SMB servers in the central office).

Can we deploy struts project in Oracle Apps server

Hi Alle,
We have set of jsps using in OAF custom application. But they are very complex and not readable,reusable,maintainable . We wanted to move to a framework for only those jsps. That means we want struts interoperate with OAF.
Can we achieve this?
Thanks
Soujanya

just give me light .. whether we can do or not .. or any suggestions ?

Can't access to sharing on Windows Storage Server 2012 R2 Standard

Problem laptop 64bit Win7 running Home and Business 2010 - 14.0.7149.5000 (32 bit).
When you hit new email - the signature displays like this. However, when you actually send the email, it arrives correctly.
Weird duplication error on preview that only affects our 2 2010 outlook users, haven't been able to find any info on this issue.
http://osua-o365.exclaimer.com/ 365 version of exclaimer.
Already tried removing Outlook/update agent, deleting any trace and reinstalling.
Any ideas?

http://solutions.webtitan.com/blog/bid/187865/The-shortfalls-of-exchange-for-archiving-are-many-Why-a-true-email-archiving-solution-is-requiredThe term archive has a technical meaning. Its a collection of information that is permanently stored and unalterable. Archives are necessary for all businesses (to varying degrees) to comply with regulations and in the case of litigation.The terms backup and archive are often confused. A backup is intended to restore the system to a state in time when there is data corruption or loss. As such, backups are overwritten with more recent information as time progresses. Archives, on the other hand, preserve data for longer periods of time and are easily searchable.Why do you need archiving?Moving email to archives helps limit the amount of data storage needed for mailboxes. A good archiving solution...

Can't access a VM within oracle VM server

Similar Messages

Maybe you are looking for