Can't access Adobe ID via PSE 8

When I try to sign in with my Adobe ID in PSE 8 I get the following error message: "Photoshop.com services are currently unavailable. Please try again or check your network connection. Error 400." But I can login via my browser. Need help accessing via PSE 8 so I can use all aspects of the product

start here, Unable to log in to Photoshop.com services
if that fails to help, clear your adobe.com cookies and retry.
if that fails, Sign in, activation, or connection errors | CS5.5 and later

Similar Messages

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

HT1222 Since downloading the IOS7 I can't access the internet via a wifi. I would like to remove it, is it possible? I have the ipad2

Since downloading the IOS7 I can't access the internet via a wifi. I would like to remove it, is it possible? I have the ipad2

Sorry, no. Apple does not support downgrading.
Have you tried to go into your settings, reset, reset network settings? It'll erase your current network from your iPad and let you start over.

TS1717 I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

I can't access Itunes Store via my Itunes. When Itunes start, CPU always 100%, I've tried uninstall and reinstall Itunes but it seems to be useless. Please help !!!

I can't access Itunes Store via my Itunes.
Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

The ! sign before the song means that the actual song is no longer on your computer and/or iTunes library.

HT1145 I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac.

I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac. How do I see them? I also can't see them on my iPad using FileBrowser.

You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
Here is a basic article on the first setup and what you should see:
http://support.apple.com/kb/HT1178
To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
http://support.apple.com/kb/HT1300?locale=en_US
Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
-Dan

Firefox opens up, but, this morning, I can't access any links via Firefox. I can via Explorer. I prefer Firefox. Help!

Firefox opens up, but, this morning, I can't access any links via Firefox. I can via Explorer.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Can not access home network via ipod touch, password entered not accepted

Can not access home network via ipod touch, password entered not accepted
Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
1. Which password is required? I entered the password I use for logging into my router
2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
I have not been able to find any information on this subject

jersey0904, Welcome to the discussion area!
You need to enter the wireless encryption password... not the administrative password for the router.

Can't access adobe website using safari 7

I can't access adobe.com on my late 2008 MacBook running Mavericks OS X. Every time I try to access the website it says that Safari "can't connect to the server adobe.com"
I've tried resetting Safari and restarting my computer. I have Adobe Lightroom 3 installed on my computer.
Any help would be appreciated!

You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Back up all data before proceeding.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you may see some other lines. The first 10 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

How we can disable access to BOM via the Display Master Recipe (C203)?

Hi Gurus,
How we can disable access to BOM via the Display Master Recipe (C203)?
Thanks!

Hi Mae Baraquio
Have you tried screen variant to make it as display mode.
please refer below document for your reference.
Learning SHD0 with Example
if you find any query kindly revert back.
Thanks & Regards
Sandeep Kumar Praharaj

Can't access Adobe Muse

I went from a 30 days trial membership to a 1 year Creative Cloud Student and Teacher Edition membership so I could acces Muse again. Trying to start up Muse (installing the program is succesfull) but it keeps on saying that it can't connect to the server. "A firewall is possibly blocking access to the server" is what the message reads. Tried everything, including turning off the firewall and antivirus software but still zero result. Removed Muse and followed the steps to remove various different affiliated files and folders, no positive result so far. Anyone familiar with this problem?

It's been a month now and I'm still unable to start-up Muse. I have deleted the old Adobe programs on my computer and installed Adobe's CC again. I'm still able to open and use every program in the creative cloud membership like before except for Adobe Muse. It still keeps on telling me it can't connect to the server.Can't access Adobe Muse

Hi All, Can I access Adobe reader internal variables in my pdf? for example location, file size, creator etc.

Hi All, Can I access Adobe reader internal variables in my pdf? for example location, file size, creator etc. I want to create a hyperlink in my pdf $Location/another.pdf?

Thanks Gilad.
let me rephrase my requirement. I have a group of pdf files where one pdf has hyperlinks to the other pdfs
parent.pdf
-- child1.pdf
-- child2.pdf
when I click on the child hyperlink I want the child.pdf to be displayed in another window/reader
If I have the hyperlink as file:./child1.pdf it does not work. It needs a complete path.
So when I create this file in MSWord first, Can I artificially create a placeholder for the directory and append the child.pdf?
suppose the properties say Location = /tmp/pdfs/
can I have in the hyperlink something like file:/$Location/child.pdf and when reader is used it substitutes the url
so I get file:/tmp/pdfs/child.pdf
Hope I explained this.
thanks
-Francis
OK, let me have a very simple requirement. Can I create a pdf and when I open it
there is one line that says - This File is in xxx directory.
where xxx is the directory name where the file is. If I have the file in /tmp then it should say This file is in /tmp directory
and if I copy it to /other then open it, it should say This file is in /other directory.

How can i access dmz server via public ip from inside?

hi all !
As shown in Figure，how can i access the server in dmz zone via public？
i can access it via private ip 192.168.1.1 now,but i can't access it via 101.100.1.2.
who can help me ?
thank you !

Hi,
You would have to configure Static NAT from DMZ to INSIDE for the server in the same way you have done for DMZ to OUTSIDE.
Basically in the following way for example
object network DMZ-WEB
host 192.168.1.1
nat (dmz,inside) static 101.100.1.2
This would enable your users on the "inside" to access the "dmz" server with the public IP address. And naturally only with the public IP address after this NAT.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Can't Access Router Settings via 192.168.2.1

I have recently changed modem/routers as my connection speed was increased recently and the old modem wasn't up to the task... The previous modem/router was preconfigured and I did nothing to it, however the new one requires settings be fixed by accessing it via a browser at 192.168.2.1
When the technician came to check my line and set up the new modem, we encountered a strange situation. Despite being connected by Ethernet cable, my machine could not access the IP address reserved for the router.
The reply is: "Safari can’t connect to the server.
Safari can’t open the page “http://192.168.2.1/” because Safari can’t connect to the server “192.168.2.1”."
We tried Firefox and the same happened.
I have deactivated my firewall, rebooted, changed cables, restarted the router, got Safari to pretend to be Explorer, got the neighbor's dog to bark at it, everything except make a blood pact with the devil, and the two browsers on my machine think that 192.168.2.1 is an external address- which it isn't, and of course fails to connect.
The technician used his laptop to configure the thing, so I can access the internet (obviously) but I must find out why I can't access the router/modem's settings, if only to find some logical reason for this illogical behavior.
I've tried looking this issue up, and I get lots of bad wiring, wireless connection, windows proprietary shenanigans, but none that explain my situation.
I'd appreciate it if someone could help me make sense of this.
My setup:
Computer Model Name: Power Mac G4 (AGP graphics)
Model Identifier: PowerMac3,1
Processor Name: PowerPC G4 (3.3)
Processor Speed: 1.35 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 832 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Sales Order Number: M7827LL/A
Router: "2-Wire Gateway"

Your advice did the job quite nicely and it seems this is the "natural way of things," but I was totally unaware of it since my previous modems were preconfigured and I never had to muck about with subnets and such things.
What irks me is that this is basic, bare bones information that the Tech support people should have given me right off the bat. Why do they assume I have all the right numbers input into the Ethernet or PPPoE settings? They seemed totally perplexed that I couldn't connect, and frankly so was I- since my old Mac, as decrepit as it is, is still able to kick it with the modern way of things better than most computers I work with.
If they had asked me if I had set the right IP's in the right slots, it could have been fixed in 2 minutes.
Thank you very much for solving my problem, it saves me a lot of stress and confusion.

I can't access Adobe Color Themes in Illustrator

Hi,
I've dowloaded the latest Illustrator from CC and when I click on Windows on the menu bar I don't see Extensions like I see in Photoshop. I can't access the Adobe Color Themes like I can in Photoshop. This same issue applies with InDesign. Do I need to reinstall Illustrator and InDesign?
Thank you,
Robert

Kuler was the extension. It is now renamed to Color and not an extension anymore. You can access the Color themes from the Window menu or from the Swatches panel (click the little icon at the bottom of the panel).

Can't access Adobe ID via PSE 8

Similar Messages

Maybe you are looking for