Can't access AirPort Snow from the utility... :-(

dear all, a couple of days ago I got a 2nd hand AirPort base “Snow”, with the idea of setting up a wifi network at home but still having the PowerMac G4 connected via ethernet, as it doesn’t have an AirPort card and I don’t really want to install one. The chap I got the base from told me it was ok, as the base has 2 ethernet plugs, one for the cable coming from the ADSL modem and the other for the cable to the G4, but that I should have set the base as “Bridge”.
When I first connected the base with AirPort Admin Utility (I also downloaded version 4.2.5 for Graphite & Snow) I could easily modify the base and network password, network & base names (I first had to “soft reset” the base as the previous owner couldn’t remember the password) then following the “advanced options” instructions in the Designing AirPort Networks2.pdf found in the cd coming with the base, I removed “the checkmark from the “Distribute IP addresses” checkbox” to set it as bridge... and since then the base can’t be seen anymore from the Admin Utility... I’ve tried both with ethernet or wireless with my iBook, and while this one gets signal, there’s no way to interact in any way with the base. I’ve also tried (more than once) to reset the base back to the factory parameters, but it hasn’t changed anything
Any idea what I should do next?!?
thanks a lot!!!

Did you follow the instructions in "Resetting an AirPort Base Station or Time Capsule FAQ" when you reset the snow AirPort base station (ABS)?

Similar Messages

Can't access my desktop from the sidebar. Keeps going to terminal

can't access my desktop from the sidebar. Keeps opening in terminal window. Also when trying to save from an email, I cannot save to desktop

If you haven't already restart and test, if no joy then Repair Disk Permissions in Disk Utility. Open Disk Utilties (Applications - Utilities - Disk Utility) select the internal HD, select the First Aid tab and then click Repair Disk Permissions. To be safe run Repair Disk Permissions 2x.

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

Since installing Photoshop CC I can't access Camera Raw from the program Bridge.

Since installing Photoshop CC I can't access Camera Raw from the program Bridge. When I try, I get a message that says, "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature." Is Photoshop CC a qualifying product? It has been opened a number of times, but it doesn't solve this problem.

I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

Hello. Since I bought my new MacBook Pro I am having issues with the home sharing with Apple TV. I can't access my computer from the Apple Tv, although both home sharing options are on. I can choose Apple Tv as an output from my MAC though.

Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.

The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
General Homesharing Help 3
(75) (10) (35) (-30) (140226)
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Can I access my account from the Skype for Android...

Is it possible to access my account (e.g. change details of Skype to Go numbers) from within the Skype app or do I need to open a browser session to do this ?

Yes.
You can sign into your account from any computer with itunes.
Your library will not be there, but you can use your account.

Can't Access my server from the Server App

Upgraded to Lion Server, everything seemed to go OK. Now, for some reason, I can't access the settings from the Server app. It asks for a passowrd, and it won't take it. I can reboot the server, log in just fine. But entering in my username and passowrd in the Server app, no dice.
Thoughts???

Got it. This thread helped!
Thanks!
https://discussions.apple.com/thread/3193444?tstart=60

I can't access my mail from the server!!!

I am having trouble retrieving mail....I click on "Get Mail" and nothing happens. When I select the inbox and Get Info, it shows that there are a number of new emails on the server, yet my Mail program does not want to retrieve them. I checked to see if my account was enabled (under Preferences) and it is....I don't understand what the problem is...this is happening in a networked office of 10 other macs, and only one other person is having this exact same problem. very weird. internet works fine.
any suggestions? I'm about to download a new mail program like entourage if this keeps up.
thanks,

POP account.
We own Entourage already, so that isn't a problem.
Right now we're using www.mail2web.com as a temporary solution, but that isn't really practical for a professional architecture firm where email records are essential to our business.
I would love to keep using Mail, I really have no idea how to fix this problem. I don't know why it is only happening to 2 of our 10 computers, there is no difference in the setup of any of them, and this started mid-morning, so I know that the users did nothing to the settings. It just stopped wanting to pick up mail from the server.
File size does not seem to matter, because one of the computer's mailboxes has about 10,000 emails saved, and the other has about 20, and they are showing the exact same behaviour. It is really strange!

How can I access onenote files from the iPhone?

Hi there,
I would like to explore the method of manually and regularly moving onenote files from my iphone to my PC so that I can view them on my PC.
Is this possible? If so, can anyone please tell me how?
I'm thinking this will require copying a file or something from my iPhone to my PC, but how?
Thanks

I wouldn't hold you breath. I understand what you say you want to do, but that is going in exactly the opposite direction that the industry is moving.
Using MS's cloud based sync is not an "extra step". It reduces the effort to keep things synchronized on your part to nearly zero.
If there is no 'trust issue' there, as you seem to imply, then it seems you are simply trying to complicate your life by refusing to use the application the way it was designed to be used.
One Note isn't anywhere near being 'one of a kind'. It's one among many, and not a very good one at. It's bloated, slow, and cumbersome.
Investigate other options, or use it the way it's meant to be used, but hoping that Microsoft will move in the direction you want to go is pretty much pointless.
Tools like File Explorer can often do more harm than good. you were never intended to have access to the file system on the phone. One wrong move can really screw things up.

How can I access files saved from the browser on my tablet? Doesn't open files?

I tried to save a document on my tablet but in the downloads place in the browser it wouldn't open. I thought it was OK cause maybe the doc format, but I just tried to save a photo and when I tried to open it, it said "unable to find the default app."
How can I get the photo on my tablet under pictures or something? Do I need to download a special app?

WMA files from libraries usually if not always contain DRM, which makes it impossible.
(59943)

Can't access FIOS DVR from the web or moble phone

Whenever I try to access my multiroom DVR in my MyVerizon account, I get a "Bad Gateway" error.
I have tried rebooting DVR and router without any luck. I ran the DVR self diagnostic, then tried the disable then enable remote web DVR setting...still nothing.
Have no problem watching DVR recorded shows in any room. Please help.

Were you able to get this fixed since making this post? I have ran the connectivity test and am able to talk back and forth with the DVR over the web connectivity path. Please let me know if further assistance is needed.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Can't access internal network from VPN using PIX 506E

Hello,
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. My running configuration is as follows:
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password N/JZnmeC2l5j3YTN encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname SwantonFw2
domain-name *****.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list allow_ping permit icmp any any echo-reply
access-list allow_ping permit icmp any any unreachable
access-list allow_ping permit icmp any any time-exceeded
access-list INSIDE-IN permit tcp interface inside interface outside
access-list INSIDE-IN permit udp any any eq domain
access-list INSIDE-IN permit tcp any any eq www
access-list INSIDE-IN permit tcp any any eq ftp
access-list INSIDE-IN permit icmp any any echo
access-list INSIDE-IN permit tcp any any eq https
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
access-list swanton_splitTunnelAcl permit ip any any
access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
no pager
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.150 255.255.255.0
ip address inside 192.168.0.35 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN_Pool 192.168.240.1-192.168.240.254
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.1.26 255.255.255.255 outside
pdm location 192.168.240.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
access-group INSIDE-IN in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup swanton address-pool VPN_Pool
vpngroup swanton dns-server 192.168.1.1
vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton idle-time 1800
vpngroup swanton password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.36-192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username scott password hwDnqhIenLiwIr9B encrypted privilege 15
username norm password ET3skotcnISwb3MV encrypted privilege 2
username tarmbrecht password Zre8euXN6HxXaSdE encrypted privilege 2
username jlillevik password 9JMTvNZm3dLhQM/W encrypted privilege 2
username ruralogic password 49ikl05C8VE6k1jG encrypted privilege 15
username bzeiter password 1XjpdpkwnSENzfQ0 encrypted privilege 2
username mwalla password l5frk9obrNMGOiOD encrypted privilege 2
username heavyfab1 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab3 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab2 password 6.yy0ys7BifWsa9k encrypted privilege 2
username djet password wj13fSF4BPQzUzB8 encrypted privilege 2
username cmorgan password y/NeUfNKehh/Vzj6 encrypted privilege 2
username cmayfield password Pe/felGx7VQ3I7ls encrypted privilege 2
username jeffg password zQEQceRITRrO4wJa encrypted privilege 2
terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated

Bj,
Are you trying to access network resources behind the inside interface?
ip address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1- access-list SWANTON_VPN_SPLIT permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
2- no vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton split-tunnel SWANTON_VPN_SPLIT
3- no access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
4- isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please rate any helpful posts

Can't access my dvr from safari

Hi,
I have a problem with safari. I can't access my dvr from the browser.
After I sign in to my dvr webpage this message comes instead of loading java: The requested URL was not found on this server
I have this message when I try with Mozilla:
CacheEntry[http://xx.xxx.xx.xx/application.jar]: updateAvailable=false,lastModified=Thu Jan 01 01:00:00 CET 1970,length=40266
Missing Application-Name manifest attribute for: http://xx.xxx.xx.xx/application.jar
Missing Permissions manifest attribute in main jar: http://xx.xxx.xx.xx/application.jar
java.io.FileNotFoundException: abc (Permission denied)
Thanks in advance for any help you can provide!

Sorry... I didn't realize that this problem was common, not rare.
I remove the Discussion-related cookies and restarted. I did get to the sign-in page this time, but after clicking the sign-in button, I got "An Internal Server Error Has Occurred." (Nothing else on the page.)
I decided to check cookies again, and the same ones that I eliminated were back again. Needless to say, repeating the exercise didn't work.
Resetting Safari is out of the question. I have years worth of settings and cookies stored there for a good reason, and I'm not going to start over from scratch. I can't imagine why anyone would, unless they have a whole lot of time on their hands.
So... I've decided that this is Apple's problem. If I need Apple Discussions I'll use a browser that works.. which apparently is every browser except Safari. Now that's ironic!

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

Can't access AirPort Snow from the utility... :-(

Similar Messages

Maybe you are looking for