Can't access apache webserver from external IPs with 10.5.5

I've just setup a new install of 10.5.5. I have one website configured on port 443 with SSL enabled. It all works fine internally.
My router forwards external requests on 443 on to the local machine (192.168.5.1) which I can see working as the server's firewall is logging the access as accepted:
Nov 24 19:37:10 server ipfw[4657]: 12308 Accept TCP 82.132.136.215:58095 192.168.5.1:443 in via en0
So neither the router nor the OS X server firewall is blocking the request, but the webserver is not responding. There is no mention of the access request in the apache access or error log.
As mentioned, the server is working perfectly from local IPs on the same subnet. netstat shows this setup for port 443:
tcp46 0 0 *.443 . LISTEN
Any one any ideas on what I can do to diagnose this? I had this working perfectly with OS X client's apache but since installing the server version I have no access from external IPs.
Cheers
Russell

Hi Harry, as expected, telnet server 22 works and responds with
Escape character is '^]'.
SSH-2.0-OpenSSH_5.1
But telnetting to 443 fails to connect after a minute or so and responds with
telnet: connect to address XX.XX.XX.XX: Operation timed out
telnet: Unable to connect to remote host
It may well be something to do with my IP setup. Internally, my network is on 192.168.5.X/255.255.255.0. My server is 192.168.5.1 and also provides internal DNS. Telnet works from internal IPs.
Externally I have a static IP and external DNS requests resolve to this static IP (as I can ssh to myserver.mydomain.com from external addresses and 'host myserver.mydomain.com' returns the correct info).
Perhaps Apache isn't responding because its seeing a request to the external IP address coming in, but I thought setting the site to respond to address 'any' should over come this. It worked fine with the client.
Cheers
Russell

Similar Messages

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

Can't access work IMAP from home

Hi
We're running mail service (IMAP) on OS X Server 10.3.9 at the office. Everything works fine when I'm on the network locally - I can send and receive external emails etc.
However, I can't access the server from home using either the domain name or IP address. I used to be able to but we've recently changed ISP & router and I'm not sure if this has affected it. I assume the MX records for the domain are fine since we can send and receive.
I'm not really an IT admin-type guy (it's just kinda become my responsibility) so I don't fully understand DNS, local domains etc.
If anybody has any pointers, I'd really appreciate it.
Thanks
Ian
Mac OS X (10.3.9)
PowerBook G4 1.5 Mac OS X (10.4.8)
Mac OS X (10.4.8)

Everything works fine when I'm on the network locally - I can send and receive external emails etc.
However, I can't access the server from home using either the domain name or IP address. I used to be able to but we've recently changed ISP & router and I'm not sure if this has affected it.
DNS Basics: the DNS server basically resolves a 'name' to an IP address. E.g. mail.mydomain.com to the IP address of the mailserver.
When you are inside the local network (LAN), your computers probably find the server using a local IP address. When you are outside the LAN, then your computer will find it EITHER by using the public IP address of your firewall OR using a name which will resolve to the same.
Since it worked before you changed ISPs, I'm guessing that you had it set explicitly to the WAN IP address. This will have changed with the change of ISP.
Easiest way to fix this is to use the same host name as you MX record is set to. So if your MX record is mail.mydomain.com then use this as it is obviously resolving to the IP address of your mail server (or more exactly, the IP address of your firewall).
NEXT, since your router has also changed (and I presume this is also your firewall) then you need to ensure that the imap port required (143) is open and port-forwarding to the internal IP address of the mail server.
-david
Server 10.4.8

JMS: can I access SAP messages from extenal Java

- Can I access SAP Messages from an external (non-SAP) java program?
- Do I use JNDI or can I call using a jar file from my java invocation?
- Do I have to define a queue (or does SAP JMS have queues)
- What port do I use?
Thanks

Hi John,
> - Can I access SAP Messages from an external
> (non-SAP) java program?
>
Yes, you can use the JMS provider on the Web AS from a standalone java program.
> - Do I use JNDI or can I call using a jar file from
> my java invocation?
You connect your remote java client to the server by getting an InitialContext. The you lookup the JMS resources (such as Topic- or Queue ConnectionFactory, etc.) from the JNDI. You can have a look at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/25/bf8f44540c469abc19fb6ac3ac7885/frameset.htm">this</a> page for more info.
>
> - Do I have to define a queue (or does SAP JMS have
> queues)
>
The JMS Provider on the Web AS provides default connection factories that you can use to create a topic ot queue. The lookup strings you have to use are
jmsfactory/default/TopicConnectionFactory
for topics and
jmsfactory/default/QueueConnectionFactory
for queues.
> - What port do I use?
>
You use the P4 port (50004 by default for instance number 00) when obtaining the InitialContext with this code:
java.util.Properties properties = new Properties();
// set the properties of the connection
properties.put("Context.INITIAL_CONTEXT_FACTORY", "com.sap.engine.services.jndi.InitialContextFactoryImpl");
properties.put(Context.PROVIDER_URL, "<Server_Host>:<p4_port>");
properties.put("Context.SECURITY_PRINCIPAL", "Administrator");
properties.put("Context SECURITY_CREDENTIALS", "admin_password");
// start initial context with the properties specified
InitialContext context = new InitialContext(properties);
Hope that helps!

Can't access recent Emails from mail tile in window 8.1

Can't access recent Emails from mail tile in window 8.1. Everything working fine until yesterday. I can get my Emails by going to google Chrome and accessing my gmail but I like just hitting the mail tile in 8.1. Also is the start
of something bad onmy computer?

Hi,
Could you please explain a bit for the " mail tile " mentioned here?
If you mean to access e-mail with the Mail APP, and have issues when using it, we may first take a try with the
Apps troubleshooter.
More information regarding mail APP troubleshooting, please check the below TechNet Wiki:
Troubleshooting the Modern Mail App on Windows 8
Troubleshoot problems with an app
If any further help needed, please feel free to update here.
Best regards
Michael Shao
TechNet Community Support

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

How can I access xml document from javascript whithin a JSP page

how can I access xml document from javascript whithin a JSP page?
I have a JSP that receives an XML document from a JavaBean, so I can access it within the entire JSP, but I need to access it from the javascript inside the JSP... and I have no idea how i can do this.
Thanks in advance!

The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

Can't read iPhoto library from external drive

I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

Network Drive? a NAS?
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
Basically, you need to move the library to a correctly formatted disk.

Can't access internal network from VPN using PIX 506E

Hello,
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. My running configuration is as follows:
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password N/JZnmeC2l5j3YTN encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname SwantonFw2
domain-name *****.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list allow_ping permit icmp any any echo-reply
access-list allow_ping permit icmp any any unreachable
access-list allow_ping permit icmp any any time-exceeded
access-list INSIDE-IN permit tcp interface inside interface outside
access-list INSIDE-IN permit udp any any eq domain
access-list INSIDE-IN permit tcp any any eq www
access-list INSIDE-IN permit tcp any any eq ftp
access-list INSIDE-IN permit icmp any any echo
access-list INSIDE-IN permit tcp any any eq https
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
access-list swanton_splitTunnelAcl permit ip any any
access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
no pager
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.150 255.255.255.0
ip address inside 192.168.0.35 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN_Pool 192.168.240.1-192.168.240.254
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.1.26 255.255.255.255 outside
pdm location 192.168.240.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
access-group INSIDE-IN in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup swanton address-pool VPN_Pool
vpngroup swanton dns-server 192.168.1.1
vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton idle-time 1800
vpngroup swanton password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.36-192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username scott password hwDnqhIenLiwIr9B encrypted privilege 15
username norm password ET3skotcnISwb3MV encrypted privilege 2
username tarmbrecht password Zre8euXN6HxXaSdE encrypted privilege 2
username jlillevik password 9JMTvNZm3dLhQM/W encrypted privilege 2
username ruralogic password 49ikl05C8VE6k1jG encrypted privilege 15
username bzeiter password 1XjpdpkwnSENzfQ0 encrypted privilege 2
username mwalla password l5frk9obrNMGOiOD encrypted privilege 2
username heavyfab1 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab3 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab2 password 6.yy0ys7BifWsa9k encrypted privilege 2
username djet password wj13fSF4BPQzUzB8 encrypted privilege 2
username cmorgan password y/NeUfNKehh/Vzj6 encrypted privilege 2
username cmayfield password Pe/felGx7VQ3I7ls encrypted privilege 2
username jeffg password zQEQceRITRrO4wJa encrypted privilege 2
terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated

Bj,
Are you trying to access network resources behind the inside interface?
ip address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1- access-list SWANTON_VPN_SPLIT permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
2- no vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton split-tunnel SWANTON_VPN_SPLIT
3- no access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
4- isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please rate any helpful posts

Since installing Photoshop CC I can't access Camera Raw from the program Bridge.

Since installing Photoshop CC I can't access Camera Raw from the program Bridge. When I try, I get a message that says, "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature." Is Photoshop CC a qualifying product? It has been opened a number of times, but it doesn't solve this problem.

I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Can't access my desktop from the sidebar. Keeps going to terminal

can't access my desktop from the sidebar. Keeps opening in terminal window. Also when trying to save from an email, I cannot save to desktop

If you haven't already restart and test, if no joy then Repair Disk Permissions in Disk Utility. Open Disk Utilties (Applications - Utilities - Disk Utility) select the internal HD, select the First Aid tab and then click Repair Disk Permissions. To be safe run Repair Disk Permissions 2x.

Can't access my dvr from safari

Hi,
I have a problem with safari. I can't access my dvr from the browser.
After I sign in to my dvr webpage this message comes instead of loading java: The requested URL was not found on this server
I have this message when I try with Mozilla:
CacheEntry[http://xx.xxx.xx.xx/application.jar]: updateAvailable=false,lastModified=Thu Jan 01 01:00:00 CET 1970,length=40266
Missing Application-Name manifest attribute for: http://xx.xxx.xx.xx/application.jar
Missing Permissions manifest attribute in main jar: http://xx.xxx.xx.xx/application.jar
java.io.FileNotFoundException: abc (Permission denied)
Thanks in advance for any help you can provide!

Sorry... I didn't realize that this problem was common, not rare.
I remove the Discussion-related cookies and restarted. I did get to the sign-in page this time, but after clicking the sign-in button, I got "An Internal Server Error Has Occurred." (Nothing else on the page.)
I decided to check cookies again, and the same ones that I eliminated were back again. Needless to say, repeating the exercise didn't work.
Resetting Safari is out of the question. I have years worth of settings and cookies stored there for a good reason, and I'm not going to start over from scratch. I can't imagine why anyone would, unless they have a whole lot of time on their hands.
So... I've decided that this is Apple's problem. If I need Apple Discussions I'll use a browser that works.. which apparently is every browser except Safari. Now that's ironic!

Can't access apache webserver from external IPs with 10.5.5

Similar Messages

Maybe you are looking for