Can't access 'As Selected On Screen in Print Preview'

I can't find in Print Preview the 'As Selected On Screen Option' that I had in Explorer. How do I access it in Firefox 29?

Hold the CONTROL key down, (MAC > 'Command') then the P key - if you have selected text with your cursor you should see a 'selection' choice below "Print Range"
unfortunately, you can't tell what you are going to end up with, so,in many ways it's UN-useful.
I always switch to Internet Explorer (which i otherwise would rather not do) which gives you a useful Print Preview where you can adjust the page 'zoom' and margins.
It works quite well, in fact !

Similar Messages

How can I access the selected element of a DropDownByIndex-box?

Hi,
I want to create a WebDynpro with two web services. I created the first request with the first web service and the results are displayed in a DropDownByIndex-Box. Now the user should choose one of the results and I would like to use this for the request with my second web service. How can I access the selected Element of a DropDownByIndexBox in the Code?
Thank you!!
Julia

Hi Julia,
when user select one element in drop down it automatically set lead selection of node binded to dropdown.
For example if you bind a dropdown to node myNode with value attribute myAttribute the lead selection of node myNode is set in the position of element choose from user.
So to take this chooised element use this code:
wdContext.currentMyNodeElement.getmyAttribute()
bye
Andrea

I can't access/find the "lock" screen orientation funtion since downloading iOS 7

Since I downloaded iOS 7, I can't access the "lock" orientation key that used to be on the control centre. I've flagged on "use side switch to: Lock Rotation", but to be honest I have no idea what this means. How do I "lock" orientation of my screen with this new operating system?

Hi Anna,
With iOS7 on an iPhone, you lock the rotation by bringing up the control center and selecting the "Lock Rotation" icon. To bring up the control center, swipe up from the bottom of your screen. You should see a translucent display with the control center options:
http://www.apple.com/ios/design/
See the "You know a good design" part in the article above.
Cheers,
GB

Iphone 4s in settings can't access Notes or Mail. Also can't access mail from home screen. Can't send email. All else is good.

I need help. I have reset my iphone. I have turned it off then on. Still can't launch my built in mail app from home screen. When I try it goes to blank page then right back to home screen view.
In settings for the iphone 4s I can not access Notes or Mail, Contacts,Calendars. When I tap either of the two they highlight in blue and then go right back to Home Screen view. I seem to be able to access everything else in settings with no trouble.
From home screen I have no trouble I can launch the built in utility Notes with no problem. I also can launch Calendars from Home Screen view. My Contacts are still reachable by tapping Phone from H/S view then clicking on contacts.
I can not launch mail. nor can I send email. Also the built in mail app is not showing it is recieving mail either. All else seems fine.
I can log in to my email from Safari on iphone and from my laptop with no problem.
Anyone have any suggestions? My iphone is out of warranty. Apples only suggestions are To pay for support.
Thanks in advance

Just had a thought....was trying to rememberif anything changed last night. I think I installed a mac OS X Security update. That's about the time the trouble started. Any ideas? Thanks.

HP pavillion m6 notebook, Can't access Bios on external screen.

Hello my laptop screen has been completely ruined due to my kid brother (4years old) but thats not the problem.
The problem is that i'm now using my TV as a external screen via a HDMI cable, my problem is i can't access Bios on it.
Is there a solution to this problem ?
I've read someting about a key combination could solve the problem, but i can't find that combination, and i dont know when i should use it.
Thanks

Hi Patrickkje, and welcome to the HP Support Forums!
I understand that you are looking for a key combination to get the external monitor to turn on while in the BIOS. I did some research and found a couple things. First is this document for Testing a Hard Disk from the BIOS where you need to press the F10 repeatedly to get to the BIOS menu.
I found another combination that follows pressing FN & F1 at powerup switches to the external monitor.
I hope this information helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

HP 2311x - Can't access menu at all & screen shows "Check video Cable" message.

I've got an HP 2311x hooked up to a Mac Mini running OSX 10.6
My monitor has a black screen and is displaying the "Check video Cable" message and I am completely unable to access the on screen menu. Pressing the menu button has no effect and does not bring up the on screen interface.
I have tried connecting the monitor using HDMI, HDMI->DVI, and mini-display-port->DVI. Same results on each.
My monitor had been working fine for the past two months. When I first hooked it up the auto detection screen would pop up every few minutes while my computer was asleep so I went into the menu and disabled the auto detection and set the monitor to DVI only.
I unhooked my monitor for a few days to rearrange my office and when I plugged it back in it no longer detected any signal on the DVI input and I can't access the on screen menu to change the setting back to auto detection. I have tried to perform a hardware reset by unplugging the power cable and holding down the power button for 60 seconds, but that also doesn't work.
Any ideas?

I have two of these monitors connected to a MacPro. Last night one of them started behaving this way after a power outage. I found I had to connect it to the computer via VGA and then do a factory reset from the monitor's menu.
HP led me to believe that I could do a factory reset by disconnecting the cable and holding the power button for 20 seconds. Apparently that doesn't work for this one.

Actual screen and Print preview are different.

Good afternoon,
I am trying to make a spreadsheet, and have inserted numerous check boxes. On the screen itself, look great - but when I print preview it is like the text moves and the check boxes are in the middle of the words.
I am using Excel 2013 - I tried to insert pictures but it would but it would not let me.
Any assistance would be awesome - thanks.
Brian

Hi,
Do you have the long text in one cell and use the wrap feature? If it is, we can use Alt + enter to wrap in the cell in stand of using wrap feature.
The print preview should looks similar with original document.
Similar issue:
http://social.technet.microsoft.com/Forums/en-US/8864a60a-60b6-416a-80c0-2d7de24c2f59/print-preview-different-than-original-document?forum=excel
On the other hand, the issue also may be caused by the printer, we can export the Excel file to PDF/XPS file and then print it to test.
If the issue still exists, please try to upload the screenshot through OneDrive and share the link in the thread.
Regards,
George Zhao
TechNet Community Support

Trying to play my voicemail message in the phone app. None of the message options can be accessed when touching the screen. Any ideas?

When trying to access my voicemail message to hear it. None of the taps on the screen work.

Have you transferred photos from your computer to your iPhone which is selected under the Photos tab for your iPhone sync preferences with iTunes?
If so, you can place this video in the folder of photos on your computer that is selected to be transferred to your iPhone via the iTunes sync process. Under the Photos tab for your iPhone sync preferences with iTunes, select Include Videos.

Hi my husbands ipad mini is locked on a betting app he made a bet received a receipt and thats all that is on the screen. We have turned it off start agin and there it is took out card still there can't access any keys on screen ??

Hi my husbands ipad mini is locked on a betting app. he put a bet on got a receipt and its stuck on the screen. We cant access the ipad at all. Have turned off taken out sim card to no avail Can anyone help us. first time users!

A reset may help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.

Re iphoto: when I double click on a thumbnail i get e grey screen with exclamation mark..can't access my photos to edit, order prints etc

Was wondering if anyone can help...I am not very computer friendly but want to be able to edit my photos, use them as jpegs, order prints etc. When I double click on a thumbnail ( am presuming the thumbnails are the small photos ) I get a grey screen with an exclamation mark on it. I cannot drag the thumbnail onto the desk top it just pings back. This doesn't happen with all the thumbnails and has been a problem since we upgraded to snowleopard. I recently reinstalled photos from the memory card from my camera and they are alright. I am presuming that the old photos are stuck in there somewhere if only I knew the right buttons to press to get them out. Thanks, Jane Thomas

Easiest: Restore from your back up.
Otherwise:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Messages wont scroll? Can't access messages as the screen appears frozen

I cannot access my text messages as the screen seems to be frozen

AmishCake is correct, this should help. Just as a little bit of extension on their answer: The home button is the only physical button on the front of the phone (towards the bottom)
The sleep/wake button is the power button, located on the top of the phone on the right.

How to create pop up dialog which can be used as selection option screen

Hi,
    I want to pup up a dialog screen to let user to input some parameter to filter the current data. Currently, I created a subscreen and when I use button to call this screen, error message araised: the error message as bellow:
    "The attribute screen type with the values 'Normal Screen' and 'Subscreen' determines the use of the screen. If a normal screen is used as subscreen or vice versa, an error occurs.The screen "XXXX" 0051 has, in this respect, an inappropriate screen type. "
    Hence may I know the correct step to create this kind of subscreen?
    Many thanks!

Hi Prabhu,
    If you access into transaction SM30 and using some table view to display, then you will see at the bottom there is a button which name is Position. After you click this button, a dialog box will display.
   This is what I am looking for.
   Currently, I have created a subscreen and when I click some button to leave to this subscreen, the system raise the error message.
   In addition, could you give me the link to your material you have mentioned because I am not familiar the directory fo find it.
Many thanks!
Edited by: qinyusap on Apr 28, 2010 7:06 AM

I can't access icloud log in screen

When I try to go to icloud.com, I'm redirected to create an account. I already have an account, and want to sign in. Any suggestions would be much appreciated.

Use your computer to access www.icloud.com. Won't work on iPad.

Can you access scan function of a multifunction printer using Bonjour/expre

I'm using a Canon Pixma 830. It prints fine through airport express. I've hooked up the printer to the airport express using a usb cable.
The question is. Can I use the other functions of the scanner using the bonjour/Express set up? I doesn't seem to work. I'm using a macbook so not hooking up the usb directly to the computer would be helpful. Thanks.

Theoretically almost anything is possible...
(a) The first thing you have to have is the proper hardware support. Only Apple knows if the AEBS's USB port has capabilities to access a scanner. If the hardware doesn't support it, end of story.
(b) (1) You would need to create AEBS firmware that tapped into the AEBS hardware for scanning. (2) This firmware would need to provide a network interface for clients to use to access the scanning capability. (3) The Mac applications would need to be modified to know how to get a scan over a network connection instead of a local scanner.
I have a suspicion that a USB printer interface has been standardized to some degree while the USB scanner interface has very little standardization.

HT4623 How can the pass word ( 4 numeric pad ) on my ipad mini be recovered. I didn't set the pss word code. It just appeared and i can't access my ipad.

How can the 4 numeric pass word be recovered from my ipad mini, I didn't enter a code, it just showed and I can't access my ipad.

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
BTW, this is the iPod touch forum

Can't access 'As Selected On Screen in Print Preview'

Similar Messages

Maybe you are looking for