Can't access BIOS Setup on my Satellite C660-24F

I cant access my laptop Bios Setup - when I pres F2 , F11 or F12
*Satellite C660-24F PSC1NE*
It only statup Windows I cant access BIOS startup menu. I searched for BIOS updat for my model Satalite C660-24F - PSC1NE - and I didnt find on this web.
Can anyone help me please?

Hi
The BIOS for this unit can be found on Toshiba EU driver page:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
Currently it looks like the BIOS 1.50-WIN is the newest one.
According to BIOS access:
Press F2 while powering on the unit. This is the right and only method to access the BIOS. Press F2 several times in the row

Similar Messages

Windows 8.1-No UEFI firmware setting in advance option. Can't access BIOS with F2-Lenovo B575

There was Windows 7 Home Premium on my machine before (Lenovo B575)and I could access the BIOS and Boot Menu pressing F2 and F12. I installed Windows 8 Enterprise version first and lost the ability to go into the BIOS. I upgraded this version to 8.1 with
same results. In advanced option I don't have UEFI firmware setting tile. So I can't choose to get to the BIOS with this method. I have tried to go into the BIOS at the boot pressing F2 and many other keys with no result. The OS in both cases 8 and 8.1 hung
several times during the installation process. I had to manually reboot machine during installation several times. After the windows were installed the system still can't shut down or restart normally and I have played with different settings in power / shutdown
option. Please help. I need to be able to access my BIOS at boot or Windows level. Any help will be greatly appreciated. Thanks.

Hi,
The method to enter into advanced boot option in Windows 8\8.1 is different from Windows 7, pressing F12 during boot may not work because the booting process in Windows 8\8.1 is too fast. Here's an document from Lenovo website:
http://support.lenovo.com/en/documents/ht081446
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Please Note the sentence at the end: Lenovo preloaded Windows 8/8.1 is set up with UEFI boot. If your computer is not fitted with UEFI boot, you can only enter BIOS setup or UEFI firmware via the traditional method.
that means If you installed Windows 8\8.1 the U/EFI way you should be able to access UEFI options,
To check if you boot UEFI way, run in admin command prompt:
bcdedit
for example:
If path ends in
.efi - you boot U/EFI way, and path ends in .exe - you boot normal BIOS way.
Yolanda Zhu
TechNet Community Support

HP Pavilion DV6-3029tx Cannot Access BIOS Setup

Hello there, I have used this laptop for nearly two years, if I remember correctly.
Basically, the problem is that I want to disable Function key, but I cannot access BIOS setup.
I have tried every combination of keys at start-up screen, from ESC to F10, none of them worked.
So I thought maybe an BIOS update can solve the problem (My current version is F.07), I downloaded firmware from HP support site and run it, know what, the screen flashed and system get restarted, but nothing had changed, I didn't get even an error message.
The problem is actually found by a HP supporter when I send my laptop for cleaning last year, he didn't manage to fix it at the time and problem became devastating for me lately because certain software I am using rely heavily on function keys. The only things "big" I have ever done to my laptop were updating windows 7 Home to Ultimate (32-bit) and partition, I am not sure if they were the reason.
The following is InsydeFlash log, I searched the error code and find somebody with similar problem here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Pavillion-DV6-3125er-BIOS-UPDATE-Error/t...
--- Log started: 2012/04/18 17:30:15
Initializing...
Log file       : I:\SwSetup\SP55299\InsydeFlash.Log
Settings file : I:\SwSetup\SP55299\platform.ini (found)
Executable     : I:\SwSetup\SP55299\InsydeFlash.exe
    Version    : 4.0.4.0    Build      : InsydeFlash
    Date       : Fri Oct 15 14:25:12 2010
Resource file : I:\SwSetup\SP55299\iscflash.dll (loaded)
App name       : InsydesFlash
OS Information : Microsoft Windows 7 Service Pack 1 - supported
Preparation stage
IHISI Version : 193
    Error code : 3010(0x00000BC2)
Cleanup Stage
    Stage Completed
--- Log Stopped: 2012/04/18 17:30:16
--- Log started: 2012/04/18 17:38:11
Initializing...
Log file       : I:\SWSetup\SP55299\InsydeFlash.Log
Settings file : I:\SWSetup\SP55299\platform.ini (found)
Executable     : I:\SWSetup\SP55299\InsydeFlash.exe
    Version    : 4.0.4.0    Build      : InsydeFlash
    Date       : Fri Oct 15 14:25:12 2010
Resource file : I:\SWSetup\SP55299\iscflash.dll (loaded)
App name       : InsydesFlash
OS Information : Microsoft Windows 7 Service Pack 1 - supported
Preparation stage
IHISI Version : 193
Device Name:\Device\HarddiskVolume1
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume3
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume4
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume5
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume7
SearchVolumeFileAndCreateDirectory
Sign File Name:\\?\Volume{5ab76131-9b4b-11df-90b9-c80aa990af36}\\Hewlett-Packard\BIOSUpdate\HpBiosUpdate.sig
Sign File Name:\\?\Volume{5ab76131-9b4b-11df-90b9-c80aa990af36}\\Hewlett-Packard\BIOSUpdate\HpBiosUpdate.EFI
Device Name:\Device\HarddiskVolume2
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume6
SearchVolumeFileAndCreateDirectory
Device Name:\Device\CdRom0
Device Name:\Device\CdRom1
Allow Version: B.0D, Dex: 2829
Current Version: F.07, Dex: 3847
Current BIOS version is bigger than the version setted in Ini.
Partition : 1 WMI 0x0D: 1
Check Package : 1
BIOS sign : 1
File sign : 1
    Processing parameters...
        Image file     : I:\SWSetup\SP55299\01448F29.bin
        Backup file    : No Backup file
          OEM ID       : 0x103C
    Loading new BIOS image file...
        Opening file I:\SWSetup\SP55299\01448F29.bin
Not sign file
g_dwEcSize : 0x00080000
Reading 4194304 bytes from file starting at      0 ...
        BIOS image size : 4194304 (0x00400000)
ECSize : 0x80000
    Error code : 3010(0x00000BC2)
Cleanup Stage
    Stage Completed
--- Log Stopped: 2012/04/18 17:38:20
Thanks for your help.

Nevermind, I deleted the HP_TOOLS partition and problem solved, this may help those who have similar problem.

Can not access BIOS after update BIOS

Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS again

That is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

How can I access the Setup Assistant on a new HD?

How can I access the Setup Assistant on a new HD? We had a new HD installed but it didn't show the Setup Assistant.

Did you successfully install an OS on the new hd?

Thinkpad edge s230u twist can't access bios by F1,bios recovery

When I tried to update win8.1 updates KB3000850, it failed via auto-update or installation. Follow the Microsoft guide to restart laptop into safe mode, installation failed also. Then I chose safe mode with minimum way to restart laptop. Then laptop halted down at Lenovo logo.
At first, I thought bios is modified by windows8.1(x64) and it can't load any hard disk to boot. With a couple of days test, I found a way to flash BIOS at very beginning of laptop boot. BIOS can be updated. But there is still no startup option to set boot sequence. My laptop is still halted down at Lenovo logo, same as BIOS update. I can only access bios by keeping real clock error which I generated by clearing BIOS.
if no real clock error, i can't access bios. And f1 and f12 doesn't work. At the lonovo logo screen, Enter doesn't work also although it hints me to press Enter.
In my laptop bios, there is no startup option even I udate it.
can somebody help me on this? Lenovo service center just aksed me to change board.
Here I share the bios crisis recovery solution for s230u, may also for other models.
Laptop: ThinkPad edge s230u twist 3347-3QC
Bios: 1.67, UEFI.
OS:windows 8.1 x64
How to do BIOS crisi recovery:
1. Download bios(exe version) from Lenovo website
2. Run it, and release file. Uncheck the installation at last. Remember the release location. You can get the bios in .fl1 format, mine is in ..\gduj21us\GDETA9WW\
3. Rename it as BIOS.cap and copy it into a new formatted USB stick with FAT32 in root directory.
4. Shutdown Laptop and disconnect AC cord. Insert USB stick.
5. Hold Fn+R, plugging in AC power. And power-on.
6. USB stick is blinking, then you can release key. A short while, after a lenovo logo, flashing screen shows.
7. After flash, laptop will restart or shutdown.
In BIOS, it shows new version. If new bios is new one, flashing takes a longer time than a very short time for same version flashing.

I tried 1.02, it will try to read USB stick, then shutdown, restart, read again, laptop would be in this cycle. It's same when i changed one Bit by hex-editor of 1.69 version. I also try to use PhoenixTool 2.59 to rebuild BIOS after change one or two Bits of extracted roms. same status also, it took the changed bios as wrong input, enter the above cycle also.
I tried 1.53, it can show lenovo logo, and flashing screen, but it hints that BIOS should be qual or newer.
I still wait for some on guide. Thanks in advance.

HP pavillion m6 notebook, Can't access Bios on external screen.

Hello my laptop screen has been completely ruined due to my kid brother (4years old) but thats not the problem.
The problem is that i'm now using my TV as a external screen via a HDMI cable, my problem is i can't access Bios on it.
Is there a solution to this problem ?
I've read someting about a key combination could solve the problem, but i can't find that combination, and i dont know when i should use it.
Thanks

Hi Patrickkje, and welcome to the HP Support Forums!
I understand that you are looking for a key combination to get the external monitor to turn on while in the BIOS. I did some research and found a couple things. First is this document for Testing a Hard Disk from the BIOS where you need to press the F10 repeatedly to get to the BIOS menu.
I found another combination that follows pressing FN & F1 at powerup switches to the external monitor.
I hope this information helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

Can I access BIOS using JNI?

Hi,
Can I access BIOS using JNI on Windows and Linux platforms?
Mathew

I guess that the old BIOS functions (INT 15 for instance) are "emulated" by Windows when you are running old 16-bit DOS programs. They're mapped into equivalent Windows calls. Even if the BIOS implement different features you can't run the exact BIOS code. (Please correct me if I'm wrong)
I don't know about Linux handling of BIOS calls.
If you simply want to read (not execute) the BIOS code in Linux you can use a special device (/dev/kmem? I can't remember the exact name) and seek to the BIOS address.

Can not instal Win7 WLAN Driver for Satellite C660-168

I can't install WLAN driver on my Satellite C660-168 after Windows 7 installing.
What's the problem?

Hi Admiral,
And why you cant install it? Do you get an error message or what happens exactly?
As PauPau wrote you have Broadcom WLAN card so you have to download Broadcom WLAN driver that can be downloaded on Toshiba WLAN portal.
Before installing the driver make sure you are logged in as Administrator or with Administrator rights. ;)

Satellite L55-B5357 Can't access BIOS

How can i access/open BIOS on my satellite L55-B5357 laptop?? I've never had an issue opening bios on any conputer i've owned. I like this laptop, but i need to access bios and just can't figure it out. I've held F2 while powering up, held FN key plus F2 while powering up, tried ESC and most other F keys to no avail. I get the Tishiba Black screen first then it goes to the windows screen where i have to log in, no bios option. Please help???? This is driving me nuts, i've searched all over the internet and you guys are my last hope, what can i possibly be doing wrong, this should not be a problem, it should be as easy as pressing a key during boot. Thanks.

Since Win 8 and 8.1 came along, things have changed a bit. Hold DOWN the shift key while clicking Shutdown. Hold DOWN F2 while pressing the Power button. Voila! The BIOS/UEFI will appear.

Laptop will not boot, stops at Toshiba screen then an error message. Can't access BIOS

I receive the following error message:
For Atheros PCIE Ethernet Controller v2.2.7(11/02/10)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Before it first shut down, there was some blue screen with a message I was unable to read in time. I turned it back on and got the above message. I have done some research and it sounds like some kind of hard drive problem. I've checked the hard drive connection and it's fine, the same message appears. I also saw that you can access BIOS(not sure what this is exactly, I've never used it) and then somehow recover, reset or change a boot setting that may have changed by itself. I can't access it though. I have tried F8, I have tried pressing escape as soon as the red Toshiba screen comes on, and also tried holding it and releasing when the tone sounds, then pressing F1 but all I get is a tone and no screen.
It's about to be finals week and I really need some help getting this fixed...preferrebly without having to by a new hard drive because all kinds of homework, papers and study info is on this computer. I haven't even had it for two years yet. I can attach a picture of the screen if needed but it's just a black screen with the above message.
Thanks for any help!
EDIT: Satellite L655-S5150 and Windows 7
Solved!
Go to Solution.

It does sound like a hard drive related issue, be it a virus, or physical failure. If you have fast boot enabled, you will need to hold down F8 while you power up, as just tapping F8 at the BIOS splash screen will not work. If you are unable to recover that way, hopefully you created recovery media when you first got the laptop(it would have prompted you in the action center).
If that was not done, you could always swap in a new hdd to get the system up and running, and get a eSATA to USB cable to get all of your info off your old drive.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Statellite C850-F0055 F12 key doesnt access Bios setup

Statellite C850-F0055 was failing to boot.it was saying check media (fail).
i then change the boot from normal to fast boot.Since then, its saying
"NO bootable device---- please restart system"
When i press F12 key at booting it doesnt bring the bios setup.
how do i change it back to normal from fast boot so it can bring bios setup. please help.

>When i press F12 key at booting it doesnt bring the bios setup.
This is wrong key. You have to press F2 in order to access the BIOS.
By the way: even if the fast boot would be enabled, the unit should find the HDD and should be able to boot up the Windows system. So I guess its not a problem with the fast boot switch but probably the HDD isnt OK.
I recommend you to access the BIOS (F2) and to check if HDD is visible on the first BIOS page.

After disk recovery, restoration incomplete error - error during PININST_BBV - and can't access BIOS

Hi I haad got :Ultrabook HP ENVY 6-1103el
I performed a disk recovery (with disks made myself) to wipe the hard drive. Got to disk 4 of 4 when HP Recovery Manager window appeared with following error message when I click the Details button:
ctoerror.flg file
[21:12:12.07] ChkErrBB.CMD : Detect some error during PININST_BBV.
[21:12:12.07] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[21:12:12.07] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
[21:12:12.08] ----------------------------------------
[21:12:12.08] Critical error condition was detected at BBV1...
[21:12:12.08]
[21:12:12.08] Refer the following file if exists.
[21:12:12.08] - c:\system.sav\Logs\BurnBootWarn.log
[21:12:12.08] - c:\system.sav\Logs\BurnBoot.log
[21:12:12.08]
[21:12:12.08] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
[21:12:12.08] because RM's dialog can't appear on [Start] screen on Win8 environment.
[21:12:12.08] customer may not notice RM already shows Error dialog.
[21:12:12.08]
[21:12:12.08] ----------------------------------------
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
There are 3 options, Save Log, Details, Retry. When I try 'Retry' it asks for recovery media. I've put my recovery disk 6 and disk 1 in, but nothing happens. Oddly enough, the command prompt (cmd.exe) is open at this point. Now whenever I restart the laptop it goes to the same restoration error screen with the command prompt open and minimized in the lower left hand corner.
Pressing F10 (BIOS Setup) or F11 (System Recovery) after starting doesn't do anything, it just goes straight the the Restoration Incomplete message. Pressing Esc during start goes to the Startup menu, but pressing F10 or F11 there just does the same thing. F2 System Diagnostics works. I ran quick memory check, everything passed. I ran the long hard drive check. Overall it passed, and each one passed except for optimized dst it said 'not available'. When I choose BIOS Management from Diagnostics UEFI, and try either a BIOS Update or BIOS Rollback, I get 'The selected BIOS image was not available.' My system's BIOS ID is F.23. When I try to select a BIOS Image to apply, I've clicked through the file trees and there's nothing there to choose.
I tried recovering the BIOS pressing Windows and b key when starting. The screen stayed blank and the caps lock light kept flashing but nothing happened. The screen just stayed blank and no bios update screen appeared.
Did my BIOS become corrupted during the system restoration from disk?
Any suggestions or options?
Thanks.

Hi larag,
Thank you for your reply.
As I stated in my original post, I suggest you contact HP support and explain in detail the events that happened, when you tried to do the recovery. The contact information is in my original post.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How can I access BIOS/EFI in MBP Retina

How can I access EFI (or BIOS equivalent) in Macbook Pro Retina?
I tried to access with Option + Command + O and F. But, it doesn't work.
Is there anyone who saw the bios settings of MBP Retina?

Apple disables the standard mechanism for entry into the EFI shell in its computers, but not the EFI shell itself. If you want to launch the EFI shell, you can download third-party software that changes the interface EFI shows you at start-up. This will void your warranty & support, so you'll have to use Google for instructions.

P67A-GD55 can't access bios.

Had problem earlier to access bios using an msi p67a gd43, today i changed in to a p67a gd55 and i have the same problem. When i start it counts "98","99","A3" and then i press ALT and it just locks saying "starting setup".
I'm able to boot in to windows 7 64bit without any problem.
My setup is:
CPU: i5 2500k
GFX: Palit Geforce GTX460 768mb
RAM: 2x UMAX DDR3 1600 oc 2gb
PSU: Zumax 630W
I've unplugged all HDD and DVD.
So far I've tried to Clear Cmos with button and also jumper/battery method. Bios was 1.8 stock but flashed it anyway to 1.8.
Switch slots for RAM.
Removed the moderboard from chassi so it had no metal contact.
Changed PSU.
Only things i havent been able to change is ram and gfx so i suppose one of them is causing this problem, as for the memory im not able to get any information from it in sisoft sandra, in cpu-z it cant identify the brand.
Anyone had this or similare problem, and what did you do?

Quote
I hearby would like to inform all people that cetus UMAX DDR3-1600 OC is NOT suitable with MSI's P67 chipset.
It would be beneficial if you could advise the forum what memory you are using now that does work. Makes it easier for others that are considering memory for their boards.

Can't access BIOS Setup on my Satellite C660-24F

Similar Messages

Maybe you are looking for