Can't access desktops with gestures in Maverick

I am gesture friendly, not menu friendly.  I have Mavericks and when I swipe up with four fingers I don't have all my desktops showing across the top, and not able to access a new one by tapping the upper right corner. 

I finally found a solution: I had to uninstall both Acrobat and Pagemaker and reinstall them both but Acrobat first.
But that has only solved one problem.
Will post another thread with the other problem.

Similar Messages

  • How can I access Pandora with Apple TV?

    How can I access Pandora with Apple TV?

    let me know if u found a way to do this... appreciated..

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • HT1338 Hi, I have accidently sent my iPhoto from the dock to the trash, can I get it back? I've searched the trash but can't find it, my photos are still in the computer, but I can't access them with the iPhoto icon in the dash.

    Hi, I have accidently sent my iPhoto from the dock to the trash, can I get it back? I've searched the trash but can't find it, my photos are still in the computer, but I can't access them with the iPhoto icon in the dash.

    See this,
    I lost my Safari /other on the Dock! "poof" "?"

  • How come I can't access Facebook with my gmail account?

    Along with a couple other sites, I can't access Facebook with my gmail account. I'm on a mac, and even if I use different browsers (safari and google chrome), the page never opens. It consistently says "the connection was interrupted." I've tried everything, including allowing all cookies, deleting cookies, changing firewall settings, etc. However, it's not a problem on my Parallels (on the same computer). The weird thing is my friends with hotmail or yahoo facebook accounts can access the site. Help!
    == URL of affected sites ==
    https://login.facebook.com/login.php?login_attempt=1
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
    1. Malwarebytes (Free version) - http://www.malwarebytes.org
    2. Spybot Search & Destroy - http://www.safer-networking.org
    3.Spyware Terminator - http://www.spywareterminator.com
    In addition, there are a number of forums you can use to help get rid of your infection. These include:
    *http://www.bleepingcomputer.com/forums/
    *http://forums.spybot.info/
    *http://www.spywarewarrior.com/index.php

  • I CAN NOT open Iphoto with the new Mavericks????

    I can not open Iphoto with the new Mavericks, I changed Dutch for English but stil nothing ....

    Hi Kevertjes,
    Thank you for the update.  I recommend verifying that you are signed in with the same Apple ID associated with or used to purchase iPhoto on the App Store under the Store menu. 
    If you are signed in with an alternate Apple ID, I recommend signing out of the App Store, signing back in with the correct Apple ID, and then trying the update again:
    Sign out
    Choose Store > Sign Out.
    Sign in using an Apple ID
    Choose Store > Sign In, or click Sign In in the Quick Links section. The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
    Enter your Apple ID and password, and then click Sign In.
    Mac App Store: Sign in and out
    http://support.apple.com/kb/PH11499
    All the best,
    Sheila M.

  • Can't access forums with my UserID.

    Can't access forums with my UserID.

    Hi triscele666,
    So you try to login with your preferred Apple ID (the one you are supposed to use) and it asks you for a username?   This sounds like there is no Apple Support Communities user linked to that Apple ID, so it asks you for a username to create one, but there is an existing user linked to that email.
    Do you have any other Apple IDs that may have been used to create an Apple Support Communities user?
    How to find your Apple ID
    Do you have any other Apple Support Communities usernames?
    ivan

  • Can't see desktop with blue screen after login

    Hi
    we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery.
    From application log, we  find some error: 
    Description (Event ID:  1000):
    Faulting application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, faulting module msshsq.dll, version 7.0.6002.18255, time stamp 0x4be071d5, exception code 0xc0000005, fault offset
    0x000063fd, process id 0x1300, application start time 0x01cf9a43236d46dd.
    Description(Event ID:  9009):
    The Desktop Window Manager has exited with code (0x40010004)
    Description(Event ID: 1530):
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.  
     DETAIL - 
     1 user registry handles leaked from \Registry\User\S-1-5-21-249263827-1212357926-315576832-391740:
    Process 3812 (\Device\HarddiskVolume1\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-249263827-1212357926-315576832-391740

    Hi,
    In general, event ID 1530 means there are some data in the user profile are still be accessed when the user log
    off from the Terminal Server. Please check if any of the data is still remained in the user profile supposed to be deleted. You can use Process Monitor or Process Explorer in order to find the software which is using the data and find the solution. If there
    is no such data remained, the Windows have possibly stopped the process and deleted the data when log off. In such a case, you can ignore the Event 1530.
    In addition, I recommend running SFC /Scannow from an elevated command prompt and check a dump file for Windows
    Explorer under C:\Localdumps.
    Besides, you can also download
    Autoruns to troubleshooting Explorer issues. Please run Autoruns as Administrator, go to Options menu, Filter, select Hide Microsoft Entries and Ok. After that, open the Explorer tab,
    and you will see all DLL that are running inside File Explorer, so start disabling and testing if Explorer crashed.
    Furthermore, the KB below may be helpful:
    http://support.microsoft.com/kb/961038/en-us
    Best regards,
    Susie

  • Can't access Mac over network since Mavericks update

    Help! Since the update to Mavericks I can't access my iMac over my home network using my Nexus 7 tablet. I used to do it flawlessly right before I updated from Mountain Lion.
    I was using ES File Explorer to browse my shared folders on my Mac from my Android Tablet right away and now I keep getting asked for a username and password to connect. I type it correctly but still not able to connect. I tried other file browing apps for my tablet (File Manger, AndSMB,...) but still unable to connect. The apps can scan my network and find the server address (iMac) but can't get access to it.
    I must say that the Tablet can access the internet so it's not Tablet network settings related.
    I tried the workaround found here http://cammodude.blogspot.ca/.  Still not working. Any suggestions?

    Try going back and checking the step 3 on the linked instructions for remote login where it mentions:
    Step 3: Now enable “Remote Login” in the Sharing menu of System Preferences.
    Read more: http://www.shoutpedia.com/transfer-files-mac-os-x-mavericks-android-phone-wifi-e asy-way/#ixzz30iEam8MC
    That's the part that will allow it.  I've got "Remote Login" checked there' and and then make sure you have whichever user(s)/groups added for the login you're using.  I have that set to Administrators and on then on my phone I have it set up with computer IP, port 22, my computer username which is a First Last type format with the space...whatever it normally says on your login screen on your computer or when you get prompted to allow software installs etc. and then the password.

  • Can't access iPhoto with new OS X.  Are all my pictures still there?

    Updated to OS X and now I can't access my iPhoto.  I have 9.1.5 and it says I can't use this with OS X.  Will all of my photos still be there is I update to a newer version of iPhoto?  I haven't backed up my iPhoto Library and unsure that I even can considering I can't open iPhoto at all. 

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
    OT

  • I want to take old emails from one user account to another. Can't access 'net with old user account.

    My computer was infected some time back, and the only way I could use most programs was to set up a new user account. Now I want to retrieve some old emails and move them to my new account, but can't seem to make it happen. F/fox opens under old a/c, but can't access 'net so I can't forward them. I tried putting them into a folder, putting it on a USB drive and dragging that into 'fox in my new a/c, but it won't open. I am using Win XP.

    two ipods wrote:
    I have my husband Iphone and an Ipad on one account.  I have my own phone on another account. I want to move the Ipad from my husbands account to my account so I can purchase him an Ipad2 and I can use the old one with all the settings and apps as they are now and then update with my contact information.
    How do I do this?
    He will run into a problem when he wants to use his own account.  Some apps will have been purchased on one Apple ID and other apps will have been purchased on a different Apple ID.  That's a nuisance situation when the apps need updating and, unfortunately, there is no resolution at the present time (IDs can not be combined).

  • I moved my iTunes content to an external drive a few months ago; now I can't access it with other iWork/iLife applications.  Help please :)

    Between my external drive and my internal drive I have 3 Library.xml and Library.itl files. (There was a situation where I had to rebuild for some reason)
    Should the "Library" files reside on my internal drive or external drive?  In my ~/users/username/Music/iTunes/ directory?  If so, can I delete all current versions of the Library files and just rebuild by holding down the shift key when starting iTunes and choosing an option?  Which one? Would they end up in the correct directory? Sorry if this seems confusing but everything works fine with my iTunes EXCEPT I can't access iTunes in other iLife/iWork programs.
    I should mention I have the same problem with iPhoto (on external drive; not populating in iLife/iWork, but works fine by itself) I know, not the right discussion, just thought I'd mention it.

    If the iTunes Library.itl file is also on the external drive, try launching iTunes while holding down the Shift key, and when the dialog window opens that allows you to create a new library or open an existing one, choose to open an existing one, navigate to the folder that contains that library file and select it.
    If that works, note for the future that if you launch iTunes when that external drive isn't mounted, iTunes will default back to the normal location on the internal drive and you'll have to repeat the Shift-launch process.
    Hope this helps.

  • Can't access gmail with safari

    When i try to access gmail, with safari, i get this error:
    Safari can’t open the page “http://www.gmail.com/”. The error is: “Operation could not be completed. (Cocoa error 404.)” (NSCocoaErrorDomain:404)
    Any help?
    Thanks

    Hi,
    Gmail users are having problems with Safari. Go here for help.
    http://mail.google.com/support/bin/static.py?page=known_issues.cs
    Carolyn

  • I can't access store with this I'd ??

    I can't access m account with my new I'd ??
    <Email Edited by Host>

    Start iPhoto and select on the menubar, iPhoto > File > Import to Library...
    Select your photo files directory.
    Regards,
    Captfred

  • Can't access websites with ios 7.0.6

    I just finally got around to downloading ios 7.0.6 on my iPad, and now I can't access certain websites in my iPad AND my Mac laptop.  I've tried restoring the iPad, and that didn't fix it.  Any suggestions?

    Possibly a 'duh' question but what is the exact app name for the podcast app? I have the same problem and when I search for free podcast app I get multiple options. Does it matter what app I choose?...
    Thanks!!

Maybe you are looking for

  • Can I use multiple values for a rollup key on the same Endeca record?

    We have a business need to to aggregate our records using different criteria, based on user navigation. We are thinking of using a rollup key with multiple values to help with the aggregation, but we are running into some issues. Here is a made-up xa

  • Problem with 160GB Classic

    So, I just recently installed the new 1.1 update for my 160Gb Classic. Everything worked fine. Then I started to apply some EQ's to songs (which I had not previously done) and iTunes froze up. I managed to end the task and quit iTunes and used the ej

  • Interpret footage default?

    whenever i bring in an image sequence the interpret footage dialog is always at 30fps which makes it necessary for me to change it to 23.976 or whatever i'm working at. how do i change the default for this? i searched help but didn't see it. also per

  • Display all G/L account codes

    Hi All, I would like to display all offset account codes of a certain transaction of a G/L account code. In G/L report, I only have one offset account code. I use this query but failed: SELECT T0.[RefDate], T0.[DueDate], T0.[BaseRef], T0.[TransId], T

  • I cannot figure out how to Download a Youtube video. HELP

    I do not want to try some third party BS (Perian, iskysoft, etc...) However, I am seeing others on this site explain how to download a video from Youtube using either Safari or Firefox, but I really can't figure it out and I am very frustrated. I am