Can't access FIOS DVR from the web or moble phone

Whenever I try to access my multiroom DVR in my MyVerizon account, I get a "Bad Gateway" error. 
I have tried rebooting DVR and router without any luck.   I ran the DVR self diagnostic, then tried the disable then enable remote web DVR setting...still nothing. 
Have no problem watching DVR recorded shows in any room.  Please help.

Were you able to get this fixed since making this post? I have ran the connectivity test and am able to talk back and forth with the DVR over the web connectivity path. Please let me know if further assistance is needed.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

  • Can't access my dvr from safari

    Hi,
    I have a problem with safari.  I can't access my dvr from the browser.
    After I sign in to my dvr webpage this message comes instead of loading java: The requested URL was not found on this server
    I have this message when I try with Mozilla:
    CacheEntry[http://xx.xxx.xx.xx/application.jar]: updateAvailable=false,lastModified=Thu Jan 01 01:00:00 CET 1970,length=40266
    Missing Application-Name manifest attribute for: http://xx.xxx.xx.xx/application.jar
    Missing Permissions manifest attribute in main jar: http://xx.xxx.xx.xx/application.jar
    java.io.FileNotFoundException: abc (Permission denied)
    Thanks in advance for any help you can provide!

    Sorry... I didn't realize that this problem was common, not rare.
    I remove the Discussion-related cookies and restarted. I did get to the sign-in page this time, but after clicking the sign-in button, I got "An Internal Server Error Has Occurred." (Nothing else on the page.)
    I decided to check cookies again, and the same ones that I eliminated were back again. Needless to say, repeating the exercise didn't work.
    Resetting Safari is out of the question. I have years worth of settings and cookies stored there for a good reason, and I'm not going to start over from scratch. I can't imagine why anyone would, unless they have a whole lot of time on their hands.
    So... I've decided that this is Apple's problem. If I need Apple Discussions I'll use a browser that works.. which apparently is every browser except Safari. Now that's ironic!

  • I can't install Flash Builder from the Web Premium suite, what should I do?

    I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
    Please advise as to what can be done to be able to download this specific program.
    Thanks,
         Sarah-Kay

    ok,
    so for the memory:      it's 4 GB 1067 MHz DDR3 and when I click to 
    install the programs it says (Macintosh HD: 10,0 Go (459,5 Go 
    disponible).
    As for the processor:  it's 2.66 GHz Intel Core 2 Duo
    Monitor resolution:    1920 x 1200
    Le 12-02-28 à 17:35, Jeff A Wright a écrit :
    Re: I can't install Flash Builder from the Web Premium suite, what 
    should I do?
    created by Jeff A Wright in Downloading, Installing, Setting Up - 
    View the full discussion
    We do still need more information such as how much memory you have, 
    resolution of your monitor, how much disk space you have free, which 
    processor are you using.  I good guide is to look at the system 
    requirements and try to post for each of the items within the 
    requirements.  The system requirements for Web Premium can be found 
    at http://www.adobe.com/products/creativesuite/web/tech-
    specs.edu.html.
    >
    Also you can find this information within your System Profiler.  The 
    easiest way to access the system profiler is to go to the Apple Menu 
    and select About this Mac.  Once selected clicking on the more info 
    button will launch the System Profiler.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by 
    email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still  access all songs and playlists on the old computer

    I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still  access all songs and playlists on the old computer

    If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
    Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
    You can request a new password here http://www.apple.com/support/appleid/

  • Since installing Photoshop CC I can't access Camera Raw from the program Bridge.

    Since installing Photoshop CC I can't access Camera Raw from the program Bridge.  When I try, I get a message that says, "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature."  Is Photoshop CC a qualifying product?  It has been opened a number of times, but it doesn't solve this problem.

    I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

  • I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

  • Can't access my desktop from the sidebar. Keeps going to terminal

    can't access my desktop from the sidebar. Keeps opening in terminal window. Also when trying to save from an email, I cannot save to desktop

    If you haven't already restart and test, if no joy then Repair Disk Permissions in Disk Utility. Open Disk Utilties (Applications - Utilities - Disk Utility) select the internal HD, select the First Aid tab and then click Repair Disk Permissions. To be safe run Repair Disk Permissions 2x.

  • Can't access AirPort Snow from the utility... :-(

    dear all, a couple of days ago I got a 2nd hand AirPort base “Snow”, with the idea of setting up a wifi network at home but still having the PowerMac G4 connected via ethernet, as it doesn’t have an AirPort card and I don’t really want to install one. The chap I got the base from told me it was ok, as the base has 2 ethernet plugs, one for the cable coming from the ADSL modem and the other for the cable to the G4, but that I should have set the base as “Bridge”.
    When I first connected the base with AirPort Admin Utility (I also downloaded version 4.2.5 for Graphite & Snow) I could easily modify the base and network password, network & base names (I first had to “soft reset” the base as the previous owner couldn’t remember the password) then following the “advanced options” instructions in the Designing AirPort Networks2.pdf found in the cd coming with the base, I removed “the checkmark from the “Distribute IP addresses” checkbox” to set it as bridge... and since then the base can’t be seen anymore from the Admin Utility... I’ve tried both with ethernet or wireless with my iBook, and while this one gets signal, there’s no way to interact in any way with the base. I’ve also tried (more than once) to reset the base back to the factory parameters, but it hasn’t changed anything
    Any idea what I should do next?!?
    thanks a lot!!!

    Did you follow the instructions in "Resetting an AirPort Base Station or Time Capsule FAQ" when you reset the snow AirPort base station (ABS)?

  • Hello.  Since I bought my new MacBook Pro I am having issues with the home sharing with Apple TV.  I can't access my computer from the Apple Tv, although both home sharing options are on.  I can choose Apple Tv as an output from my MAC though.

    Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.

    The following article(s) may help you.
    Understanding Home Sharing
    Setting Up Home Sharing On A Computer
    General Homesharing Help 3
    (75) (10) (35) (-30) (140226)
    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Home Sharing
    Security Software Issues
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Can't read pdf-files from the web

    Some pdf-files from the web (using Safari 6) is not readable on my iMac, OSX 10.7.4.
    I get a lot of
    instaed of text.
    Why?
    /Karin

    It happens even to me (iMac late 2006, OS X 10.6.8, Safari 5.1.7(6534.57.2)), but instead of ??? I get black screens. Here some links to several PDF files:
    http://www.heathrowairport.com/static/Heathrow/Languages/Downloads/italian-secur ity-guide.pdf
    http://www.crs.lombardia.it/ds/ccurl/487/15/2008_10_15_Manuale_di_installazione_ e_configurazione_del_CRS_Kit_per_Mac_V1.0.pdf
    http://tda.panasonic-europe-service.com/docs/2z508fef28z3z36c0fz6974z706466z23zc 6217222fafecd42377558ba5cd29331bfd3c26a/tsn2/data/EU/TXP42ST50E/OI/890961/TQB0E2 271C.pdf
    http://www.trenitalia.com/cms-file/allegati/trenitalia/treni/Frecciargento_sched atecnica.pdf
    Luciano

  • [HELP!] Can't access shared folder from Azure Web Role on same Azure Virtual Network

    I have an Azure Virtual Network that has a virtual machine acting like an app server running some legacy applications that is writing some files to a folder that is shared.
    This shared folder is accessible from other virtual machines within that virtual network without issue.
    The problem I am having is that I have an Azure Web Role that is also attached to the above
    Azure Virtual Network that is unable to access the shared folder. I know the web role can see the app server as it is able to ping the IP of the machine.
    There is some code that needs access to the shared folder to process some of the files that is stored there, but the code won't run because it can not access these files. I used Remote Desktop to see if I could ping the machine, and I can, but I cannot navigate
    to the path in file explorer due to access being denied.
    Can anyone offer any advice or tips to point me in the right direction to gain access to this shared folder from my Azure Web Role?

    Hi Robert,
    Thanks for your posting!
    Form your descirpiton, I suggest you can refer to Tom Zhang's solution via this
    link:
    1. Enable Remote Desktop. (You have done this step)
        2. RDP to one instance of your service. Open up IIS Manager and set the application pool identity to use the account that we used for RDP.
        3. On on-premise local machine, right click "My Computer' and select "Manage". Add a new account with the same account name and password as we specified for Remote Desktop.
        4. Give the new account necessary permissions to write file to the shared folder. (I think you have done this step too)
        5. Try running the code again and see if it works.
        6. If it still says "access to path <folder path located on local machine> is denied". Please check the permission of the shared folder again.
        7. If it works, then the next step is to configure the application pool identity using Startup Task instead of using Remote Desktop (See the suggestion inhttp://social.technet.microsoft.com/Forums/en-US/windowsazuresecurity/thread/247ba75e-87d9-497c-9ec6-1fd4e2c7ff90).
    But I still recommend you enable Remote Desktop for your web role to check if the Startup Task has successfully configured the application pool identity or not.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I access my account from the Skype for Android...

    Is it possible to access my account (e.g. change details of Skype to Go numbers) from within the Skype app or do I need to open a browser session to do this ?

    Yes.
    You can sign into your account from any computer with itunes.
    Your library will not be there, but you can use your account.

  • Can't Access my server from the Server App

    Upgraded to Lion Server, everything seemed to go OK.  Now, for some reason, I can't access the settings from the Server app.  It asks for a passowrd, and it won't take it.  I can reboot the server, log in just fine.  But entering in my username and passowrd in the Server app, no dice.
    Thoughts???

    Got it.  This thread helped!
    Thanks!
    https://discussions.apple.com/thread/3193444?tstart=60

  • I can't hear any sound from the web

    I can't hear any sound from any flash website, or music players on myspace, and youtube.com etc... I think its a flash problem. It worked a few days ago. Is it a problem with my browser? With Flash? A virus?
    I tried the web browser's preferences and system preferences. I got the latest version of flash player. Is there anything else?

    That's great kar3b3ar.
    When you get good answers to your questions you have two options. You can give the person a solved or a helpful.
    They get points towards their status level. The more people answer questions and help others the higher level they have.
    So if you would like you could give the one who answered your question a shout-out by giving him a helpful of solved.
    Enjoy the forums. I use it frequently for my problems.

  • How do I access iCloud remotely from the web?

    With MobileMe, I could type the URL MobileMe.com and be presented with a login screen to my account.
    How do I get to my account via the web now that I've left MobileMe for iCloud?

    http://www.icloud.com

Maybe you are looking for