Can't access FTP server OR the SITE!

I installed dreamweaver and succesfully mapped it to my FTP server. I was in the middle of a sync between my remote and local folders when the connection was dropped! It would not reconnect, I found out a few minutes later that I could not even access the web page itself, or the hosting server, of the ftp directory. NOTHING! However, my roommate can access all of the fine from his PC. I am a new MAC user and was wondering if there was some bandwidth limit I have exceeded or something. I turned the firewall off and everything! AHHH. I'm losing my mind here. Someone pleasse tell how to fix this.

Problem solved. The issue was the FTP Client I was using *****. It opened over 50 simultaneous connections with the server and the server firewall blocked my IP.

Similar Messages

  • Can't access FTP server to download tftp.exe file

    I am trying to update the firmware on my WRT54GS v5 router.  I had no problem downloading the firmware, but can't access the FTP site for the TFTP.EXE file.  It won't work in IE or Firefox.  I can't get it through my router, or wireless thorugh my neighbor's router.
    What should I try? 

    To download the TFTP.exe file on your computer click Here.
    Once you download the TFTP file on your computer, now connect your computer to the Linksys router and Follow the instruction below. 
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Can't Access my server from the Server App

    Upgraded to Lion Server, everything seemed to go OK.  Now, for some reason, I can't access the settings from the Server app.  It asks for a passowrd, and it won't take it.  I can reboot the server, log in just fine.  But entering in my username and passowrd in the Server app, no dice.
    Thoughts???

    Got it.  This thread helped!
    Thanks!
    https://discussions.apple.com/thread/3193444?tstart=60

  • How can you change the banner of the FTP-server on the Linksys WRT610N ?

    Dear readers,
    My question is this : How can you change the banner of the FTP-server on the Linksys WRT610N ?
    At present it says : "Welcome to WRT610 Router's FTP service" which gives away the type of the device.
    Which is a clue I would rather hide. Besides that I would like to change it to something more personal.
    But how do you do that ?
    The UG is silent about this.
    Regards
    John

    Try this to change FTP banner?
    * Login as admin
    * Open Internet Information Services (IIS) Manager
    * Expand FTP sites (from tree view)
    * Right-click on the particular FTP site, select Properties
    * Click on the Messages tab
    * Setup new message
    * Save the changes

  • I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

    I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

    Hi jeffbeal,
    First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    Hopefully this helps!

  • I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail  The connection to the server failed.  I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying.

    I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail  The connection to the server failed.  I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this?  -Stu

    Hi StuNYC,
    Welcome to Apple Support Communities.
    It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that  cause an alert like that to appear in when starting the Mail app.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    I hope this helps.
    -Jason

  • Can't access mail - getting message the connection to the server has timed out

    can't access mail - getting message the connection to the server has timed out

    Hi mtc,
    Has it worked before?
    Are you running any anti virus apps?
    If using a browser to login via WebMail, does that work?

  • SSRS 2005 why some users can't access report server.

    There is one user who can't access report server by clicking a link to a report. A window will pop up asking for login. Even he enters login, the window will keep coming back. I have set the user for that report and assigned the 'Browser' role to the user.
    Other users don't have this problem. E.g. for another user I also set him up for the report and assigned 'Browser' role but he can access the same report no problem.

    Hi thotwielder,
    As per my understanding, I think this issue can be caused by the following two reasons:
    The report server can be blocked by Firewall. If Windows Firewall is turned on, the port that the report server is configured to use is most likely closed. Indications that a port might be closed are the appearance of a blank Web page after requesting a
    report, or a blank page when you attempt to open Report Manager from a remote client computer. In this scenario, we can try to open port 80 in Windows Firewall on both report server and client computers.
    The report server can be blocked by browser. We should ass the report server URL to trusted site in the browser.
    We can also grant the user access to site-wide operations with system-level row in report manager to check the issue again.
    Please double-check we have been grand the user the browser role on the report. We can navigate to Security property of the report to check the issue.
    Reference:
    Configure a Firewall for Report Server Access
    Configure a Native Mode Report Server for Local Administration (SSRS)
    Grant User Access to a Report Server (Report Manager)
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

    Hi,
    I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.  I can access CRM with same user id and password from our office inside the network.  I can get
    the page to give login details once I have login details I got below error. Please help me to solve this issue.  It was working before.
    Access denied You do not have sufficient access rights or privileges to perform this action. 
    Regards,
    Noushad
    [email protected]

    On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
    Refer
    this on how to update host file.
    Regards, Saad

  • Can't access Portal Server

    Hi,
    After installation of JSE(Windows Version),
    I can access the identity admin console with url
    http://host:port/amconsole
    But I can't use the url
    http://host:port/portal or
    http://host:port/portal/dt
    to access Portal Server Desktop, the browser
    receive an 500 Internal Error Message.
    The summary report after installation is
    Installation Summary Report
    Install Summary
    Sun Java System Message Queue 3.0.1 Service Pack 2 : Installed, Configured
    Sun Java System Application Server 7 Update 1 : Installed, Configured
    Sun Java Studio Enterprise 6 2004Q1 : Installed, Configured
    Sun Java System Web Server 6.1 Service Pack 1 : Installed, Configured
    Sun Java System Directory Server 5.2 : Installed, Configured
    Sun Java System Identity Server 6.1 : Installed, Configured
    Sun Java System Portal Server 6.2 : Installed, Configured
    PolicyAgent: Installed, Configured
    It seems nothing wrong, and how can I solve
    this problem?
    Many thanks,

    So, you got Java SE installed. Great. (I've been following your other thread re: installing IS and PS properly).It's not exactly right. I try to use Windows 2000 to install JES and with the same DNS configuration.
    It works. But I still can't install IS/PS correctly in the original machine(Win XP).
    Check the troubleshooting info in the Java SE Install Guide, I believethis error is covered in there. Be sure you use a new instance of your browser to access the PS desktop. And, be sure to check the supported browser list in the Release Notes.
    I go through the overall Install Guide, it's really that I can't find and answer to solve my problem :'(
    Regards,

  • InetFTPLogin() always report "can not connect FTP server"

    I have setting up the FTP server in the Windows 7 system, it not use any password and  account. I can use the browser to view the result. But if use InetFTPLogin("ftp://127.0.0.1", " ", "") to login the server, it always return -9, means cannot connect the FTP server. what is wrong?
    David

    Hi David,
    I'm not sure about it but maybe you should try it :
    InetFTPLogin("127.0.0.1" , " ", " ");
    (without "ftp://")
    J.

  • I can not accessed J2EE Server because i dont know username and password

    I set username and password as tutorials but not successful.
    and after that i can't access J2EE server with localhost:4848.
    please tell me the way access J2EE server.Or Default username and password of it.
    Thanks your help!

    Hi,
    Can you please send more infomation on exactly what is failing? Are you trying to execute asadmin commands?
    Also, which platform are you running the appserver on? Does the appserver show up in the list of currently running processes?
    I believe that the default username is "admin" and the password is "adminadmin".
    Thanks,
    Kyle

  • Accessing a server via the Server app from outside a router firewall

    So I'm trying to access my server using the Server app on a MacBook Pro outside my server network.  I can access it just fine when my client is inside the server network, but I cannot connect when outside the server network.
    I've done the following troubleshooting:
    - I've turned off the server Firewall option available in the server's Server Admin tool
    - I've set up port forwarding on my router
    - I've opened up port 311 on the router
    - I've placed the server outside the router DMZ zone and the Server app connects just fine
    - I've checked the box "Allow remote administration using Server" in the server's Server app Settings tab
    - With the router configured correctly, the Server app cannot access the server
    There's something in the router that is blocking access by the Server app.  Apple Enterprise support says they are sure there is no other port to open up.  Is there something else I should be doing to access the server from outside the router using a client Server app?
    TIA
    ps - this worked fine when I just had the server hanging directly off a cable modem.

    I and I suspect a lot of other admins would argue you should not be making your server accessible via Server.app remotely due to security concerns. Saying that, I and again I suspect a lot of other admins also want/need to be able to remotely administer servers. There is a better way however to achieve this.
    You should be running a VPN server, perhaps using your same Mac server. You should leave the firewall blocking access directly for Server.app but if your remote Mac first connects via the VPN it will then be connected securely to your internal network and then be able to use Server.app

  • EA6500 - unable to setup Folder Access / FTP Server / Media Server functions

    I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server.  I click them and nothing happens.
    Also, the Cisco light on the router keeps blinking.  I'm googling to find out how to troubleshoot these situations but I'm having no luck.
    I appreciate any help with these situations.

    DoublePromo wrote:
    I contacted customer service, and they helped me troubleshoot.  The description of the router and it's capabilites appears misleading to me - "Folder Access" - I thought it gave one the capability to file share between different computers that are on the same network.  It's only for files that are on a USB stick that's connected to the router.  Oh well.  Good thing I still have Network Magic Pro.
    In addition to this, storage functionality on the router doesn't need any software for it to work. The router should be able to detect the external drive when connected and get it configured on the router's interface unlike network magic which you've mentioned where the program must be installed to all computers in the network for it to be able to see all devices present in the network and share files and folders through it.

  • On iTunes 11, how can I access home sharing if the music is from a CD? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

    On iTunes 11, how can I access home sharing if the music is from a CD on a different computer using Home Sharing? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

    Yes, you can copy songs that you ripped from a CD to your Home Sharing computer.
    Turn on Home Sharing first on both computers.  To do that, go to File > Home Sharing > Turn on Home Sharing.  Enter your Apple ID and password.
    Now go to your computer that you want to copy the songs to and connect to your Home Share.  You can do that by clicking on the popover button located at the left top corner right below the play control buttons.  Click on it and scroll to the bottom until you see your Home Share and select it.
    Go to Music in your Home Share.  Select the songs that you want to copy in your Home Share and click Import at the bottom right corner.

Maybe you are looking for