Can't Access home page on Windows XP...how to re-install?
I installed Oracle XE on a windows XP machine and it's not working. I believe the issue is that I log into my machine on a Windows domain, but I installed XE while at home and not connected via it. I then saw the note on the Oracle site about making sure you are connected to the network before installing. So I uninstalled and re-installed to solve the problem, but still can't get to the home page. Noting is running on port 8080.
How do I uninstall and re-install or otherwise correct this problem once I've had a bad install?
Thanks,
Don
Sorry for the slow response. I finally solved my problem. I can't explain why this works, but maybe this will help others.
When I typically log into my machine I log into a "kerberos domain" (for me "stanford.edu"). Our IT folks have set this up so that doing this also logs you in to the WIN domain as well, but you get an extra kerberos certificate for logging into other applications we commonly use.
So while logged into the kerberos domain, I uninstalled the "failed" installation of Oracle XE. Then I logged out (and rebooted for the heck of it).
I logged back in using the WIN domain (e.g. WIN/myusername) and ran the Oracle XE Universal installer.
It worked and the Oracle XS home page came up.
I logged out of Windows (and rebooted again for the heck of it).
I logged back in under my normal kerberos domain and Oracle XE continues to work.
Hopefully someone with more knowledge of Windows domains and authentication can explain why this worked.
Fyi...if I go to Control Panel > User Accounts, I can see an entry there with my username and the domain WIN. This entry has the groups ORA_DBA and Administrator. There is no other entry for the "kerberos" domain I usually log into (since it supposedly logs me into the WIN domain behind the scenes).
Good luck if you run into this problem
Similar Messages
-
After installing oracle xe, I'm not able to access the home page.
I tried looking at other posts regarding this subject and can't find an answer to this problem. Here's lsnrctl status results. Also, netstat does not show port 8080 in use.
H:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-MAY-2006 11:0
:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
Start Date 22-MAY-2006 10:56:58
Uptime 0 days 0 hr. 4 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File c:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
Listener Log File c:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CEAR.corp.snocap.com)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Additionally, I'm seeing the following errors in sqlnet.log:
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 22-MAY-2006 10:57:16
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0Hi,
this brings the error:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\Programme\oraclexe\app\oracle\product\1
0.2.0\server\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: Datei kann nicht ge┐ffnet werden
O/S-Error: (OS 2) Das System kann die angegebene Datei nicht finden.(the last lines say: "unable to open file" and "System unable to find file")
Which makes perfectly sense, because there is no such file, and nowhere else, too.
Seems that no database scheme and instance where created while installation.
[s]Is there a chance to do this after installation, i tried the installer now the second time, so i don't see a chance in reinstallation for the third time?[s]
The third installation worked out and now the database is running.
I still don't now what i did wrong before (since i did the same), but who minds if it works now...
Thanks!
Message was edited by:
user511416 -
Can't access Home page on XP, with sqlplus connection is OK
Version: Oracle 10g Expression Edition
OS:XP
DB connect with sqlplus : OK
Home page access failed:
I tried
http://127.0.0.1:8080/apex
http://localhsot:8080/apex
http://<myIp>:8080/apex
I can use it before, but one day it doesn't work.
There is a Mcafee installed on my OS, I don't know if there is any relationship.
Pls helpRun a lsnrctl status there should be an endpoint for http, if not either the database is down or the parameters needed for the XEXDB service aren't correct:
$ lsnrctl status
Listener Endpoints ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW)) -
Can't access home page in itunes store
I've been looking and I haven't found anyone else with the exact same problem as me. I have a mac OS X 10.4.11 and the latest itunes (9.2). I can do anything in the itunes store I want besides access the itunes store home page. I can search, I can go to the music and movie subsections, etc. but when I click on the home button it displays the message "We could not complete you iTunes Store request. You do not have permission to access the requested resource." and then, underneath that, in smaller print, it says "There was an error in the iTunes Store. Please try again later." I've been having this problem for weeks. Please Help!!
Try without logon.faces in the url.
http://ct-c8-pc1:8080/CmcApp/
Also log into Tomcat manager and check whether all the war files are running. -
Can't access Home Page - Oracle Database 10g Express Edition...
Hi,
I have been running the Oracle Database 10g Express Edition on my Windows XP machine for years from this location:
C:\Applications\OracleDatabaseExpress\app\oracle\product\10.2.0\server\Database_homepage.url
In Properties of the Database_homepage.url file, the URL is:
http://127.0.0.1:8080/apex
However, when I double-click on the Database_homepage.url file, I get the message "The Page cannot be displayed" in IE. I do run the "net start OracleXETNSListener" utility first.
I only ran it last week. After that, I did run a couple of virus checks that deleted a couple of trojan viruses.
What could have gone wrong suddenly? Any help would be greatly appreciated. Thanks a lot!
Edited by: markk2 on Mar 1, 2011 9:18 PMHi Mark;
Nice to hear issue solved ;) Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Can't Access Home page in another system
Hi All,
I had recently installed BO 3.1 and when i tried to access the CMC IP link (http://ct-c8-pc1:8080/CmcApp/logon.faces) from another system it throws an error "Cannot find page:CmcApp/logon.faces". I had open the ports for tomcat 8080 and CMS (6400) , it works for tomcat when i tried to access from other system 'http:
10.9.60.45:8080/'. Any help would be appreciated.
Thanks,
KalyanTry without logon.faces in the url.
http://ct-c8-pc1:8080/CmcApp/
Also log into Tomcat manager and check whether all the war files are running. -
How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
== This happened ==
Every time Firefox openedFirefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
To have new tabs open a specific web site, add one of the following extensions:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777 -
OBIEE 11g - Insufficient Privileges. "Access Home Page"
Hi All,
We just upgraded 11.1.1.6.0 to 11.1.1.6.5 and also did trhe Active Directory setup.
we are getting below error when we login. Please help us to resolve this.
Error in login page:
Insufficient Privileges. "Access Home Page"
Error Details
Error Codes: C64RS3Z2
nqserver.log
[2013-01-06T11:04:25.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [43143] Blacklisted connection pool: '"Oracle Data Warehouse"."Oracle Data Warehouse Connection Pool"'
[2013-01-06T11:04:25.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [43144] Skipping execution of Initialization Block: 'HR_WRKFC_SNAPSHOT_DT' due to blacklisted Connection Pool: '"Oracle Data Warehouse"."Oracle Data Warehouse Connection Pool"'
[2013-01-06T11:04:28.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [58002] Query Cache loaded with 0 entries from saved cache files.
[2013-01-06T11:04:28.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [85003] MDX Member Name Cache subsystem started successfully.
[2013-01-06T11:04:28.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2013-01-06T11:04:29.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: oracle.bi.security.service.SecurityServiceException: SecurityService::<init>Error during initialization'
[2013-01-06T11:04:29.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 1] nqsserver: Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.6.5.
[2013-01-06T11:05:15.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004ASU5lCa9tXkpWwCCyb0002IM000000] [tid: 83] [43071] A connection with Cluster Controller s49d4z0.federated.fds:9706 was established.
[2013-01-06T11:07:38.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 1842f5af0aae243b:7453fe0a:13c0d143310:-8000-0000000000005fa7] [tid: 7a] User 'weblogic' logged in as an init block user.
Thanks,
PrasadThanks for prompt update.
I am not able to login catalog manager and showing error "Access denied. Check "Access SOAP" privilege."
Please help.
also currently I see below error in nqserver.log file
[2013-01-06T12:10:07.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004AW8sPdr9tXkpWwCCyb0002dM000000] [tid: 1] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: oracle.bi.security.service.SecurityServiceException: SecurityService::<init>Error during initialization'
[2013-01-06T12:10:07.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004AW8sPdr9tXkpWwCCyb0002dM000000] [tid: 1] nqsserver: Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.6.5.
[2013-01-06T12:10:09.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004AW8sPdr9tXkpWwCCyb0002dM000000] [tid: 81] [43071] A connection with Cluster Controller s49d4z0.federated.fds:9706 was established.
[2013-01-06T12:11:20.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 1842f5af0aae243b:7453fe0a:13c0d143310:-8000-000000000000659d] [tid: 7a] User 'weblogic' logged in as an init block user.
[2013-01-06T12:11:41.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 1842f5af0aae243b:7453fe0a:13c0d143310:-8000-00000000000065df] [tid: 7a] User 'weblogic' logged in as an init block user.
[2013-01-06T12:12:16.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 1842f5af0aae243b:7453fe0a:13c0d143310:-8000-00000000000065e6] [tid: 7a] User 'weblogic' logged in as an init block user.
[2013-01-06T12:12:49.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 1842f5af0aae243b:7453fe0a:13c0d143310:-8000-00000000000065f1] [tid: 7a] User 'weblogic' logged in as an init block user.
[2013-01-06T12:16:06.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 0004AW8Tq1g9tXkpWwCCyb0002dO000000] [tid: 79] User 'BISystemUser' logged in as an init block user.
[2013-01-06T12:16:06.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004AW8Tq1g9tXkpWwCCyb0002dO000000] [tid: 79] [nQSError: 13049] User 'XXXBISYSTEMUSER' with 'empty' permission can not query user population.
[2013-01-06T12:16:06.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 0004AW8Tq1g9tXkpWwCCyb0002dO000000] [tid: 79] [nQSError: 13049] User 'XXXBISYSTEMUSER' with 'empty' permission can not query user population. [[
[nQSError: 43113] Message returned from OBIS. -
I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc. Who have ever found this problem,
pls. help.
The pop up error msg. is "Sorry, you don't have access to this page"Hi,
According to your description, after you cleared job queue about force check-in then you can't access some pages in PWA.
Maybe you need to check in the pages which has been checked out.
If you have administrative rights, it is possible to override the check-out via the View All Site Content page:
Site Actions->View All Site Content->Pages->Hover the item you want to check in, and from the context-menu (arrow-down next to the filename), choose "Discard Check Out"
Besides, to troubleshooting the error “Sorry, you don't have access to this page”, refer to the following articles:
http://sharepoint.rackspace.com/sharepoint-2013-troubleshooting-an-access-issue-with-a-custom-master-page
http://technet.microsoft.com/en-us/library/ff758656(v=office.15).aspx
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Insufficient Privilegies. "Access Home Page"
Hi,
We have currently an issue with BI. Users can logon using the Single Sign On page to Oracle E-Business Suite.
Then they logon using a responsibility link to BI. After 30min to 1H, the user is timing out and can't logon again.
The user is receiving the error:
Insufficient Privilegies. "Access Home Page"
If we restart the server, all the users can logon again normally without any issue and it could stay like that for hours.
This is really an inconsistent issue as it's happening randomly. In EM, I can see some message like:
User XXXXX logged in
User XXXXX logged out
The GUID for user XXXXX has changed. This could result in a catalog access issues. Please Update GUIDs and try again.
Insufficient Privilegies. "Access Home Page"
We already refreshed the GUID. Restarted the server. Not sure how to solve this random issue.>E-Business Suite Expire is set to 30 minutes
If it is related to idle time! I guess you are good.
Btw: how about ConnectionExpireMinutes?
Message was edited by: SriniVEERAVALLI -
On iTunes 11, how can I access home sharing if the music is from a CD on a different computer using Home Sharing? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?
Yes, you can copy songs that you ripped from a CD to your Home Sharing computer.
Turn on Home Sharing first on both computers. To do that, go to File > Home Sharing > Turn on Home Sharing. Enter your Apple ID and password.
Now go to your computer that you want to copy the songs to and connect to your Home Share. You can do that by clicking on the popover button located at the left top corner right below the play control buttons. Click on it and scroll to the bottom until you see your Home Share and select it.
Go to Music in your Home Share. Select the songs that you want to copy in your Home Share and click Import at the bottom right corner. -
I can't access folder share in WIndows Server 2012 R2 from windows 8.1
i have a strange case:
I have a Windows Server 2012 R2 machine with a shared folder. Accessing this folder using a Win7, Win8,
Win 2008 R2 machine using \\servername works fine but form windows 8.1 or windows
2012 r2 i can't so any one can help me.Hi,
Would you please let me know the complete error message that you can find, when can’t access to the share folder
that host in the Windows Server 2012 R2?
If you logon the Windows 8.1 (or server 2012 r2) with administrator account, will encounter the same issue?
Meanwhile, please access the share folder via \\server’s IP address\share folder. Then please check if this issue still persists.
In addition, there is a similar thread. Please refer to and check if can help you.
Can't
access UNC share on Windows Server 2012 R2
Hope this helps.
Best regards,
Justin Gu -
Setting internet home page on Windows Phone 7.5 No...
How do you set internet home page on Windows Phone 7.5 Nokia Lumia 900?
Baseline information:
Phone Manufacturer: Nokia
Phone Model: Nokia Lumia 900
Mobile Operator: AT&T
Software: Windows Phone 7.5
Phone Operating System version: 7.10.8112.7
Zune software version: 4.8.2345.0
Computer Operating System version: Windows 7 Home Premium (x64) Service Pack 1 (build 7601)@RFNAPLES
If you leave a webpage up there without closing it from the tabs it should always return, otherwise tap the "three dots" bottom right of screen and scroll down to"pin to start" and you will then have a new tile upon homescreen.
Happy to have helped forum with a Support Ratio = 42.5 -
I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting
it may be your browser. CHeck the folloinwg
1) Turn on Compatibilty mode
2) Security Options / Make it a local trusted site
3) Turn of Protected Mode in the browser under Security
and have you tried it from Chrome
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Can not access home network via ipod touch, password entered not accepted
Can not access home network via ipod touch, password entered not accepted
Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
1. Which password is required? I entered the password I use for logging into my router
2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
I have not been able to find any information on this subjectjersey0904, Welcome to the discussion area!
You need to enter the wireless encryption password... not the administrative password for the router.
Maybe you are looking for
-
Is there any option to recover a file we saved with the same name that other by mistake in a MAC PC
is there any option to recover a file we saved with the same name that other by mistake in a MAC PC
-
Hi All, Is Java 1.4.2.17 stable or are there any issues ? Regards Shaji
-
Problem in FEBA due to FINSTA idoc
Hi All, We are implementing IHC. Our house bank configuration is as follows: Bank account number = 0123 & alternative account number = 123. Earlier, (Before implementing IHC) when we used to see in FEBA, we could see one line representing statements
-
Process chain overall status red - single processes green
Hi, I'm monitoring a process chain in RSPCM. Some of the steps within the chain went red during the run but went green after repeating those steps. But now my overall status of the chain is still red. How can I set the overall status of a process cha
-
Publishing RoboHelp 9 files into SharePoint 2010
Does anyone know why I continually get an invalid SharePoint path when trying to publish from "Robo into SharePoint? Do I need to choose a particular workspace template when I am in SharePoint? Any help would be appreciated.