Can't access IBM mainframe 3270 session via SSL self-signed cert.

Can't access IBM mainframe 3270 session via SSL self-signed cert since sometime last week. Using Mochasoft tn3270 lite on android works fine but iPad ios7 says "IBM mainframe has closed the session". Any clues would be appreciated.

I'm thinking the problem may be the IBM cert is 1024 bit. Investigating choices to implement 2048 bit cert into IBM.

Similar Messages

HT4906 I have upgraded my OS to Mountain Lion and updated Iphoto to latest, however, I still can not access photos sent to me via photo stream. what else do I need to do? I'm $30 into this effort, and no results!

I have upgraded my OS to Mountain Lion and updated Iphoto to latest, however, I still can not access photos sent to me via photo stream. what else do I need to do? I'm $30 into this effort, and no results!

Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT

Can I access my time machine remotely via it's IP address?

I'm going away - I know that I might need some documents that I can anticipate. Can I access my time capsule via it's IP address?

On the other hand if you have a dynamic IP address from your ISP how are you going to find the IP address once you are away.
You call your wife and ask her to open up AirPort Utility on her computer and give you the IP address
I never used this connection very much when traveling because it was always incredibly S------L------O------W. I don't think users realize that they are at the mercy of of their uplink connection from a hotel or any other spot.

I can't access to my Time Capsule via internet.

Hey, guys,
I can't access to my TC back home after install Yosemite.
My TC is in Taiwan, and I am in China.With OS 10.9, it work fine.
However, it can't link back to my TC now.
Did anyone know to fix it?
Or anyone have the same problem?
My device are Macbook Air, late 2011, and iPhone 5S, mid 2014.

Here is another person with the same issue.. but it came good all of itself.
Time Capsule remote access disabled with Yosemite?
Are you also using BTMM and iCloud?? Then maybe just be patient.. Yosemite needs to reindex all the files on the TC to use them.. and over an internet connection that may take an Age, Two Ages plus half an age.
Your indexes are lost with the install of Yosemite and it will take ages to re-index.

Can I access my Mobile Me IDisk via I Cloud?

I have a Mobile Me Account and want to know if I will still be able to access the IDISK document storage if I move to ICloud? Also, Can I post PDF, Quicken or other non Apple documents to I Cloud and then access them from either my MAC or from a PC?
THANKS.

Well I can't access my iDisk since I migrated to iCloud. When I log on to me.com, the page just bounces me straight to iCloud
There are docs on there I really need right now, that I uploaded from a different location to where I am now
GRRRRRRRRR
I'm going to have to start using Google Docs instead. I need cloud backup for all sorts of important docs, not just iworks ones

Can't access my paid subscription to Cloud. After sign in says trial has expired.

I've paid 3 months of my subscription to Creative Cloud but can't access it because everytime we sign in, it says our trial subscription is over. How do I get it activated to recognize that I'm paying a subscription?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

My ipad4 went into restore mode,cause was software crash. Genius rebooted it erasing everything,now I can't access my email. When I try to sign in it says account is already added

Genuis had to reboot my ipad do to software Crashes unfortunetly deleting all my apps. Now I can't access my email,when I attempt to sign in it says account is already added to iPad. I cannot receive any mail,or even access my account. I have gone thru the troubleshooter, with no resolution .

I would go to managing your Apple ID at this website and see if your information is all correct, first ...
https://appleid.apple.com/
You'll see if you can sign in on managing your Apple ID, and then if you can, you can see if your information is all correct, and then ... you should be able to go back and do it, since you've verified your information.

How to access Flash Apps over https with a self signed certificate?

I have a Flex app that needs to access data from a SOAP web service over https with a self signed certificate. The app needs to ignore the https warnings, just as a browser would warn & allow the user to proceed. Buying a valid signed certificate is not an option for us.
It works fine over http.
How can I achieve this?
I read that URLRequest has a property: authenticate, that I can set to false. However, this property is available only for Adobe AIR applications from what I can see. This doesn't seem available for Flex apps.
I have tried this in both Flex 3 & the latest Flash Builder 4. Have the same issue in both cases.
Help appreciated.
Thanks

You'd really need to ask in the Flex or Flash Builder forums as this is a front end code modification and Flash Player can't do any of that.

Can't Access Hotmail of Xbox Live via Verizon DSL

Someone please help as this situation is now in its third day and no one has been able to help me. The Verizon customer service phone line keeps blaming Microsoft, and vice versa. The whole blame game is getting tedious.
Since Friday, Feb 3rd at approx 9pm I have not been able to sign into either my Hotmail of Xbox Live Accounts. Now let me be very clear, the password and logins are correct, but the browser continually times out and won't connect. I have been able to access my email via my work computer (10 miles away) so I know that the Hotmail servers aren't down. I can access the entire internet at home, just not hotmail. I can log into the Xbox website at home, but the console (which is plugged directly into the modem) times out when it tries to login.
I really just want to know that someone is looking into it. This problem seems to be affecting only Verizon DSL/FIOs customers in CA, who use hotmail of the Xbox live services. I'm just really tired of getting the run around.
To help here's what I've tried:
-Reloading and Resetting my internet browser
-Cleared cache and deleted cookies and temporary files
-Reset modem
-release/renew IP address
-contact Microsoft and Verizon (both have failed to address the issue properly)
-Accessed affected email through a different computer on a different network.
Please help.

I also thought it might be hepful to post a link to the Windows Live Solution Center forum where you can clearly see that it isn't just me. This is a systemic problem for Verizon DSL users in CA trying to access Hotmail and related Microsoft sites.
Connect the dots. This is not just an individual incident, this is a much larger outage that needs attention.
Windows Live Forum - Hotmail Timing Out
http://windowslivehelp.com/thread.aspx?threadid=1e84529b-1198-4be2-9353-8dd0f056b876

How can I access the Server file system without using any signed applet?

Is it possible for me to run an applet on the client machine such that the client can view my server file system and perform uploading and downloading of files through the applet without signing the applet?

Add the following in your java.policy file, your plug in accesses.
grant {
permission java.permission.AllPermission;

Not able to access Internet or Internal network via SSL AnyConnect

After connecting succesfully with Cisco AnyConnect version 3.0.05152 I am unable to access internal resources. Below is the configuration of the ASA.
Any input on the below would be appreciated
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.02.04 16:15:58 =~=~=~=~=~=~=~=~=~=~=~=
sh run
: Saved
ASA Version 9.1(4)
hostname ASA
domain-name hb.local
enable password pEuUQweb2zEldXkE encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd pEuUQweb2zEldXkE encrypted
names
ip local pool Remote_VPN_DHCP_Pool 172.16.253.100-172.16.253.150 mask 255.255.255.0
interface Ethernet0/0
description *** Internet ***
nameif publicWAN
security-level 0
ip address X.X.X.X X.X.X.X.
interface Ethernet0/1
description *** Guest Wireless Network ***
nameif guest
security-level 50
ip address 10.0.254.1 255.255.255.0
interface Ethernet0/2
description *** Uplink to Branches ***
nameif Branches
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/3
description *** Uplink to JHA ***
nameif JHA
security-level 0
ip address 10.0.8.1 255.255.255.0
interface Management0/0
description *** Managemnet Interface - NOT USED ***
management-only
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns domain-lookup publicWAN
dns domain-lookup guest
dns domain-lookup Branches
dns domain-lookup JHA
dns server-group DefaultDNS
name-server 172.16.1.2
domain-name hb.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-10.0.0.0
subnet 10.0.0.0 255.255.255.0
object network obj_guest
subnet 10.0.254.0 255.255.255.0
object network obj-172.16.1.0
subnet 172.16.1.0 255.255.255.0
object network obj-172.16.1.5
host 172.16.1.5
object network obj-172.16.1.5-01
host 172.16.1.5
access-list Branches extended permit icmp any4 any4
access-list Branches extended permit ip any4 any4
access-list JHA extended permit ip any4 any4
access-list JHA extended permit icmp any4 any4
access-list guest extended deny ip any4 10.0.1.0 255.255.255.0
access-list guest extended deny ip any4 10.0.2.0 255.255.255.0
access-list guest extended deny ip any4 10.0.3.0 255.255.255.0
access-list guest extended deny ip any4 10.0.4.0 255.255.255.0
access-list guest extended deny ip any4 10.0.5.0 255.255.255.0
access-list guest extended deny ip any4 10.0.6.0 255.255.255.0
access-list guest extended deny ip any4 10.0.7.0 255.255.255.0
access-list guest extended deny ip any4 10.0.8.0 255.255.255.0
access-list guest extended deny ip any4 10.0.9.0 255.255.255.0
access-list guest extended deny ip any4 10.0.10.0 255.255.255.0
access-list guest extended deny ip any4 172.16.0.0 255.255.0.0
access-list guest extended permit ip any4 any4
access-list guest extended permit icmp any4 any4
access-list traffic_send_ips_module extended permit ip any4 any4
access-list outside extended permit tcp any4 host 172.16.1.5 eq https
access-list outside extended permit tcp X.X.X.X 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended permit tcp X.X.X.X. 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended deny ip any4 any4 log interval 30
pager lines 50
logging enable
logging timestamp
logging monitor warnings
logging buffered informational
logging trap warnings
logging asdm informational
logging queue 2048
logging device-id hostname
logging host Branches 172.16.1.80
flow-export destination Branches 172.16.1.80 2055
flow-export template timeout-rate 15
mtu publicWAN 1500
mtu guest 1500
mtu Branches 1500
mtu JHA 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp deny any publicWAN
asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (any,publicWAN) dynamic interface
object network obj-10.0.0.0
nat (Branches,JHA) static 10.0.0.0
object network obj_guest
nat (guest,publicWAN) dynamic interface
object network obj-172.16.1.0
nat (Branches,JHA) static 172.16.1.0
object network obj-172.16.1.5
nat (Branches,publicWAN) static interface service tcp smtp smtp
object network obj-172.16.1.5-01
nat (Branches,publicWAN) static interface service tcp https https
access-group outside in interface publicWAN
access-group guest in interface guest
access-group Branches in interface Branches
access-group JHA in interface JHA
route publicWAN 0.0.0.0 0.0.0.0 X.X.X.X. 1
route Branches 10.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 10.0.5.0 255.255.255.0 192.168.254.2 1
route Branches 10.28.11.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.6.0 255.255.255.0 192.168.254.2 1
route JHA 10.150.0.0 255.255.0.0 10.0.8.254 1
route JHA 10.251.4.0 255.255.255.0 10.0.8.254 1
route Branches 172.16.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.250.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.200.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.201.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.220.0 255.255.255.0 192.168.254.2 1
route Branches 200.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 200.0.11.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
always-on-vpn profile-setting
aaa-server HB_LDAP_Group protocol ldap
aaa-server HB_LDAP_Group (Branches) host 172.16.1.2
server-port 636
ldap-base-dn CN=VPN LDAP,OU=HB Users,DC=hb,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn VPN LDAP
ldap-over-ssl enable
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.255.0.0 Branches
http 172.16.0.0 255.255.0.0 Branches
snmp-server host Branches 172.16.1.80 community *****
snmp-server location Seagoville
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection timewait
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 publicWAN
ssh 10.0.0.0 255.255.0.0 Branches
ssh 172.16.0.0 255.255.0.0 Branches
ssh 192.168.1.0 255.255.255.0 management
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain hb.local
dhcpd address 10.0.254.100-10.0.254.200 guest
dhcpd dns 12.127.17.72 12.127.17.73 interface guest
dhcpd enable guest
threat-detection rate acl-drop rate-interval 600 average-rate 5 burst-rate 10
threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 129.6.15.28 source publicWAN
webvpn
port 4443
enable publicWAN
enable Branches
anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.05152-k9.pkg 2
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
wins-server none
dns-server value 172.16.1.2
vpn-tunnel-protocol ikev2 ssl-client
default-domain value hb.local
split-tunnel-all-dns enable
username HBAdmin password azFWMwV/tQh/YjoW encrypted
tunnel-group Remote_VPN_Users type remote-access
tunnel-group Remote_VPN_Users general-attributes
address-pool Remote_VPN_DHCP_Pool
authentication-server-group HB_LDAP_Group LOCAL
default-group-policy GroupPolicy1
dhcp-server 172.16.1.2
tunnel-group Remote_VPN_Users webvpn-attributes
group-alias RemoteVPNUsers enable
class-map inspection_default
match default-inspection-traffic
class-map ips_module_class_map
match access-list traffic_send_ips_module
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect http
inspect icmp
inspect ip-options
class ips_module_class_map
ips inline fail-open
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:1c38a95ce10dab97ac6ad2e99823f5a2
: end
ASA# exit
Logoff

Looks like you are missing the nonat statement. Try adding the following and test (adjust the source subnet to match your needs)
object network VPN_range
range 172.16.253.100 172.16.253
nat (Branches,publicWAN) source static obj-10.0.0.0 obj-10.0.0.0 destination static VPN_range VPN_range
Please remember to rate and select a correct answer

Can I access the master key negotiated during ssl handshake?

I'm implementing EAP/TLS and need acces to the master key negotiated during handshake. Is there a way to access in Java, I know I can do it in C++ using openssl.

True, but precisely like bjornS, I'm developing a EAP-TLS authentication over RADIUS, and the MS-MPPE-Send- and Recv-Keys are both generated from the Master Key, Client and Server Random values (with the PRF() function defined for TLS handshaking). So it seems like I've to check another JSSE implementation, or maybe implement that handshaking myself. I looked into Sun's implementation and found the PRF and Handshaker classes, but no way to access it in the way I need (all private, and in the "internal" package). But that is probably the way it should be. When running in debug mode, (debug=ssl;keygen) the keys/random values are displayed.

How can I access WEB-INF/lib

Hello all,
I deployed JClient application using Java Web Start.
I have the following lines in jnlp file
<resource>
<jar href="WEB-INF/lib/share.jar" />
</resource>
There's actually share.jar under WEB-INF/lib directory,
but I got error message when execute the application.
It seems that I can't access files under WEB-INF via http.
Does anybody know why?
Thanks in advance.

Sorry for being picky on this. Oracle is not doing it, it is the software you're using, ie JDeveloper in your case.
AFAIK, the Servlet spec states that every library that is needed by the Servlet application should be put under WEB-INF/lib. These libraries are not accessible for any other usage.
JDev is doing this because your web application needs it.
If your JNLP application needs it too, JDev should be smart enough to include it twice in your WAR file, once for your web application and once for your JNLP application.
On the other hand I really hate software that is too smart and causes more problem by being smart than everything else.
Having said that, please file an enhancement request on Metalink for JDev for better library management for JNLP applications.
--olaf

Can't access Facebook after IOS 7.1.1. Update

I can't access Facebook on my Ipad via Safari after the 7.1.1. IOS update. I only get a blank page. I can access Facebook via a FB app, so it's not Facebook. I have restarted the Ipad ,cleared cookies and the history to no avail. What is wrong? This has never happened before.

Google has gotten more security conscience. Do you want others to read your email? VPN is a good thing.
When you try to access google without the vpn on, do you get an email from google saying that they have rejected your connection attempt from a client. There is a google parameter to allow email from an unsecure client. Google will send you an email telling you how to make the change, when they reject your email client. It's a hidden parameter.
A lot of folks have gotten hacked recently in the US, so companies are implementing more security.
Robert

Access Dev Studio J2EE engine via SapRouter?

I have a group of Developers in another country who wish to use the j2ee engine on our local EP6 machine. They can presently access the R3 Dev system via SapRouter, but the question is: can we configure the j2ee engine in the Developer Workplace see the message server on the EP6 machine?
The path to setting is <i>Preferences > SAP J2EE Engine</i>
For example can we enter something like:
H/<localsaprouter>/H/<our saprouter>/H/<EP6 ip address>
Message was edited by: Graham Slater

Hi,
As for as I know ,
We need SAPlogon (higher vertion preferable but not necesary) for such knid of connection. for the saplogon connection you need application server name, system ID and username and password as described below
You also need some sort of VPN conection.
Following are the inputs required for creating Connection from SAP Logon Pad.
1. Application Server = IP Address or Host Name of SAP Server you want to connect.
2. SAP Router String = If you are connecting via Firewall accross VPN.
3. System ID = <SID> ex., DEV, PRD...
4. System Number = <00> ex., 00, 01 ..99
5. Select radio Button R/3
6. Give some description under that field.
Before doing the above please try to PING the Server at Location A from your machine(should be replying).
I don't think NWDS have this facility of using sap router remote r/3.
let me know whther this helps. also reward if so.

Can't access IBM mainframe 3270 session via SSL self-signed cert.

Similar Messages

Maybe you are looking for