Can't access my camera color profiles in Photoshop CC 2014 latest update under Yosemite

I normally have profiles for each camera made by X Rite Color Checker and these are available when processing RAW files. Under Yosemite on a new 2013 Cylinder Mac Pro, Photoshop RAW developer cannot access the profiles.
I discovered that the Adobe Submenu "RAW" was missing so I copied it from my Mac book Pro. however, the profiles still cannot be accessed by Photoshop CC 2014 on this computer.
Any ideas?
As a secondary issue, Adobe DNG maker won't accept RAW files from my Sony A7R, but it did in the past on the Macbook pro running Mavericks.
Thanks for your insights,
Asher

OK, I am not entirely sure I have understood your post completely, but when you edit a colour range with a Hue/Sat layer, and click off and back on again, it will default to showing the RGB values, which you may not have made any adjustment to. If you pick the previous colour from the image, or a similar colour, it _will_ show you the adjustments. So long as your picked colour is contained within the range of the previous adjustment.
Ypu could also use the RGB drop down (actually they call it Master nowadays), and chose the colour that is closest to your previously picked colour. I expect you are away that you can edit the colour range being operated on by dragging the four sliders on the two colour bars at the bottom of the Properties panel.
Does that make sense, or am I going in the wrong direction?

Similar Messages

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

Can't get any camera calibration profiles to show up

I am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information. Can't think of anything else. Can anyone help??

I have since corrected this issue. I downloaded adobe DNG profile editor and loaded the camera profiles I had and then saved them. At this point all of them showed up in Photoshop and Lightroom. Don't know what the difference was but they are seen now by my programs.
Thanks for the reply

Why can't I find the color profile info in the library ?

Why can’t I find the color profile info in the library ?
It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…).
I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)?
Since I’m always working in Adobe profile for printing and so this is important to know !
But no trace of it anywhere….
Thx for any reply.

The disconnect here is many (including me) don't reimport rendered JPEGs
into our Lightroom Catalogs. Why you are doing that is beyond me. You
have the original and can recreate any rendered file at any time.
Storing the derivative JPEGs is redundant, creates additional confusion
and serves little real purpose. Exported versions are considered
discarable by many.
Yes, understand what you're meaning. but the fact is that I started rather recently with lightroom. So my images where classified in directory's and subdirectory's...already.
I think that this is the major problem. This is always a problem when you step in a new system.
Let's say I am going to submit to a photographic society, I have an Export
preset created that exports to proper size and color space for
projection. It creates a file. I send it to the club. Then I delete it.
Why save it? I can recreate it. Then I don't have to manage it, search
for it, or worse yet, risk confusion with my original file or othe
resultant derivatives.
The fact that I like to keep them is
indeed an inborn result of the "pré-lightroom period". A bad habitude
indeed. I'm thinking now of deleting them, will maybe better. On the other side
I still have them just for me in order to know which ones I used and when.
Another bad habitude.
But
since I'm not a professional photographer I'm mostly confronted with the time
issue and it is for me easier to take existing files ready for use...
( doesn't mean you’re not confronted
with this problem
Today place for jpeg's is rather easy since the Gb's are almost free...
Same is true of a client photo. They want an 8x10. I go to the retouched
original, create a JPEG from an 8x10 preset in the proper dimensions and color space. Send it to the lab. Then, I can delete it.
One of the strengths of Lightroom is that it creates many fewer
intermediate file versions along the way toward final creation. Another
strength is that you can save (via snapshots in Develop) your
derivatives, export, and discard them without having to create, import
and manage additional files on disk. In the old days of just Photoshop
you might end up with a dozen or more files on your disk for every
worked file. With Lightroom, you only need one or two.
Will look deeper in your proposed workflow...and yes I'm comming from the old days.
That said, if you want to keep the derivatives for purposes down the road,
that is up to you but I don't understand why they need to be inserted
into your catalog.
Since my catalog is made in the time
from before lightroom I’m still having all these directory's and
subdirectory's...
Easier
for me since even with back-ups of the catalogue still afraid for crashes. And
I keep liking these directory structure because for the moment it's lighrtroom
and tomorrow it can be another program, you never know. It's like a website, "on line versoin only", big problem when a firm at some moment stop to provide this possibility.
I think I will try to go deeper in "how to use lightroom better..."
thanks
Edward De Bruyn

Since iOS 7.0.4 I can't access my camera roll in Instagram

Since iOS 7.0.4 I can't access my camera roll in Instagram, anyone else have this problem? I have done the whole settings-privacy-photos-Instagram-on but that didn't solve the problem.

I was having the same problem. Found this solution in the Instagram Help Center, and it worked for me.
Users who upgrade to iOS 6 and choose to restrict access to the Camera Roll will receive the following message when attempting to import a photo into Instagram: "This app does not have access to your photos or videos. You can enable access in Privacy settings."
To adjust your privacy settings, follow these steps:
Exit Instagram
Open the "Settings" app
Select "Privacy"
Select "Photos"
Toggle the ON/OFF switch next to Instagram to the "On" position
I hope it works for you!

I can't access my camera with the camera button. Only able to make videos.

I can't access my camera with the camera button. Only able to make videos.

Could you have accidentally toggled the photo to video? In the lower right (usually) corner there's a little icon that has both film and video camera and a tiny slider between them. That's how you switch from one to the other.

I can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

i can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

i have the same problem with my iphone 4.and when synching with itunes it says "can't synch contacts with iphone because iphone is using contacts. close contacts on iphone and synch again."

Can't use the camera function in my ipod touch 4s while updated to iOS 6.0

I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
There is all black screen when I turn on my camera.
I open the restriction setting already.
thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I can not access i unes in my PC. i tunes will not update

I can not access i unes in my PC. i tunes will not update. So I can not sync my i pod. my I pod will not update.

I can not access i unes in my PC. i tunes will not update.
Could you walk us through what happens in some more detail, please?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

Choose Photoshop Manages Color in the CS6 print dialogue. At the top, click the Print Settings button and disable any color management settings for the printer.
Edit: Correction, that's CS6 in Snow Leopard. In Mountain Lion, if you check the print settings, color management for the printer should automatically be disabled when using Photoshop Manages Color.

Where can I find 3D materials add-ons for Photoshop CC 2014?

Where can I find 3D materials add-ons for Photoshop CC 2014? When I pull down the 3D menu to Get More Content, it takes me here: Downloadable 3D content | Photoshop.com. When I download and install the "Versatile materials", Adobe Extension Manger tells me I am installing "Material sets for Adobe Photoshop CS5 Extended", which turns out to be the same exact set that I originally had in PS CC 2014. I also search here: https://creative.adobe.com/addons to no avail.
Anybody know where I can find 3D materials that are more current, or at least different from what I have already?

Where can I find 3D materials add-ons for Photoshop CC 2014? When I pull down the 3D menu to Get More Content, it takes me here: Downloadable 3D content | Photoshop.com. When I download and install the "Versatile materials", Adobe Extension Manger tells me I am installing "Material sets for Adobe Photoshop CS5 Extended", which turns out to be the same exact set that I originally had in PS CC 2014. I also search here: https://creative.adobe.com/addons to no avail.
Anybody know where I can find 3D materials that are more current, or at least different from what I have already?

Can't Open ACR files from Bridge in Photoshop CC 2014

I Can't Open ACR files from Bridge in Photoshop CC 2014. I have uninstalled the programs, and all other versions of PS several times, but no matter what I do, I can't open a raw file I have opened in Bridge, in PS CC 2014. I have to click Open in Photoshop CC 2014 in Bridge.
Also, on my workstation PC (Win 7 64bit), if I don't open PS prior to opening Bridge, then when I try to open a file from bridge it says it can't run PS on an earlier Operating system than Win 7!
I have done exactly the same instalation on my notebook, same OS, and everything works perfectly - I just don't understand.

Guys! This question was asked almost two months ago, and still no-one has replied? I'm still stuck, no matter what I have tried, I cannot find a solution. And please don't ask me to re-install AGAIN, I've done this several times and it simply does not work.

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out.

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out. How do I make it active?

Please go to Help, System Info and Copy then paste here.
Benjamin

Can not access Adobe camera raw in PS CS5. Have a mac OS 10.9

How do i access adobe camera raw for images fro Nikon D 7100.

Since photoshop cs5 can only use up to camera raw 6.7 and the Nikon D7100 requires at least camera raw 7.4, photoshop cs5 won't open those files directly.
Camera Raw plug-in | Supported cameras
You can though, use the 8.6 DNG Converter to convert the D7100 nefs to dng copies, which then photoshop cs5 should open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
How to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

Why can't I include a color profile when exporting to PDF?

I've a basic RGB illustrator file - no embedded or linked images, just flat colors and gradients.
I'm working in sRGB space and this is reported correctly in the info field at the lower left of the editing window.
Some issues:
1. When I look at this file in Bridge it's listed as 'untagged'. However if I re-open it in illustrator it's reported to be sRGB as expected.
What's broken here?
...and of more immediate concern:
2. Despite requesting 'Include All Profiles' on the output page of the PDF save dialog I cannot get a PDF exported that includes the sRGB profile.
Same issues in both CS6 and CC - Windows 7, 64.
Thoughts, comments or suggestions welcomed....
Thanks

Your .pdf is fine, if you open the .pdf in illustrator, adn hten do edit >> assign profile, this radio biutton will bo on what the profile. Also in the bottom left of illustrator you can see what color profile your document is saved with, btuy turning that on.
Hold down option adn you will get other fun easter egg options
Bridge only seems to show profiles for certain bitmapped formats, except .psb format.

Can't access my camera color profiles in Photoshop CC 2014 latest update under Yosemite

Similar Messages

Maybe you are looking for