Can't access my Directory Server using the Console installed on a machine

can't access my Directory Server using the Console installed on a remote server, lookied into knowledge base article 4693, but still same any idea ?

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Similar Messages

[SOLVED] Can't access my home server from the outside

Hi all,
I have installed Arch on a Raspberry Pi and am trying to set up a home server. Right now, I am running a simple HTTP server (using node.js, if that matters) on port 8080. From my LAN, I can access the server all right.
From the outside, it seems that the traffic does actually reach the computer (I conclude this from the blinking diode indicating network traffic). However, all requests time out. Interestingly, if I kill the server while a request is pending, the timeout occurs right away.
I have no idea what is causing this. I have checked for iptables rules, but there seem to be none. What is blocking the traffic and how can I find out?
EDIT: Nevermind, I was testing incorrectly -- the traffic did reach the Raspberry Pi, but the return traffic did not reach my test computer because it was blocked by the router's firewall. Testing from TOR works just fine.
Last edited by MrAllan (2013-12-24 12:01:42)

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

Can i access my account and use the programs on another computer?

can i access my account and use the programs on another computer? i would like to be able to use both my laptop and my desktop

yes, you are allowed concurrent installations and activations on, up to, two computers.
by signing out of one, you can activate on a third etc.

Can i access a mac server from the internet?

I am lookin to set up a mac os server usinng a mac mini because I am a mechanical engineering student and I want to be sure I can be able to get the files I need when I need them, because I own 2 macbook pros already and I am afraid of grabbing the wrong one on accident or something that might keep me from making a presentation, or working on a project, so I was wondering if there was a way I could access the server via the internet or something? I have been trying to do research into it before I put out all the money for it, and have not came out with any clear answers on this.

The answer is obviously yes. You just need to determine the method of connection and the persistence of access. First, if you are hosting on a residential line, you will like have a dynamically assigned IP address. So to make sure you can connect to it, look into DynamicDNS service.
Next, on a residential ISP, you may not be able to use HTTP/HTTPS as the ISP will deny this traffic. That leaves out WebDAV.
Your best and safest method (although with the MSCHAP-v2 crack this is up for debate) is to probably configure VPN and then connect via that method. However, some environments may deny this type of outgoing traffic.
But regardless of the protocol you use, you simply need to allow port forwarding on your firewall to allow that traffic inbound.

Why can I access Internet, and get my email through yahoo, but can't access email when I use the mail icon on the front of my tablet. It just started doing this today.

Why can I access the Internet, even get my email by going through yahoo, but as of this morning I can not access my email from the mail icon on my tablet screen. It just started doing this today. When I try to get my email by going through the icon, I am asked to enter yahoo password. I do this, then the box just pops up again, and again and again never letting me get signed in. Don't know what I am doing wrong. Need help!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How to track changes on the directory server using the ChangeLog facility?

The ldap search filter should read "cn=changelog"
So the query should be something like
ldapsearch -b "yourbase" -D "yourbind" -w passwd -s sub
"cn=changelog"
To make the output readabel, you may need the option -o if you use the iDS ldapsearch. If you use the Sun ldapsearch, the -o is not needed.

ApplicationLifeCycleListener can't access Runtime MBean Server

Hi all,
I have encountered quite a strange behaviour in Weblogic 9.0. I am actually trying to deploy an application originally developed on Weblogic 9.2 to Weblogic 9.0. Everything works fine, except the ApplicationLifeCycleListener. The Post Start method tries to register MBeans to the Runtime MBean Server and deregisteres them when the application stops in Pre Stop. In Weblogic 9.2, it works fine. I can access the MBean Server with a local connection as described here: [url http://e-docs.bea.com/wls/docs90/jmx/accessWLS.html#1119237]
The documentations on this for WL 9 and WL 9.2 do not differ significantly. Anyway, WL 9 quits any attempt to make local connections to the Runtime MBean Server with an Exception:
javax.naming.NameNotFoundException: While trying to look up comp/env/jmx/runtime in .; remaining name 'comp/env/jmx/runtime'
It works when I move the establishment of a connection into an EJB. I suppose that the ApplicationLifeCycleListener just can't see the Runtime MBean Server in Weblogic 9.0.
What do I do wrong? :-)
Thanks,
S?ren

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Can't start NT service for Directory Server using other acc. than LocalSys.

Hi!
I'm using Directory Server 5.1 on a Windows 2000 machine.
I wrote a Plug-In for DS that needs Administrator Access to the NT Domain. So I tried to run the DS-Service as Administrator but the service can not start. I just keeps in status "starting...".
I don't get any error message and the errorlog doesn't contain anything.
Has anyone an idea?
Thanks!
Florian

I forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7?

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7? I would like to display a simple web page, and I would like to pass to that web page the answers to all the quiz questions, quiz score, etc. In other words, instead of passing quiz results to a SCORM-compliant LMS like Moodle, I'd like to pass that data to a Drupal Webform using a URL like:
https://www.example.com/my-drupal-webform?param1=value1&param2=value2...&paramn=valuen
Is this possible?
Thanks,
John

You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
OS X: Using and troubleshooting Back to My Mac with your iCloud account

Disabling anynomous access in directory server 5.2_Patch_3

Dear All,
Would anyone help me out on how to disable anonymous access in directory server 5.2?
Thanks,
Lewis

Try removing following line from dse.ldif [of that instance of directory server]
aci: (targetattr != "aci")(version 3.0; aci "rootdse anon read access"; allow(
read,search,compare) userdn="ldap:///anyone";)
If there is no exact match you will find a similar entry.. its at the begining of dse.ldif.
You can read more about aci in Directory Server Developer's Guide.
I hope this fixes you problem

TS3899 I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

I have a similar problem. I was receiving email on my iPhone for months, and then it quit working. When it quit working, I continued to receive emails on my iPad even though the server and port settings were exactly the same between the two devices. I tried deleting and re-adding my email account on the iPhone and restarting my iPhone, but I still couldn't receive email on the device. The only way I could get email to work on my iPhone was to switch to using a POP3 email server (this is the server that my phone auto detected when I re-added my email account) -- the server that was working previously and that is still working on my iPad is an IMAP email server. Since the IMAP server settings continue to work on my iPad, it seems that the problem is with my iPhone and not my email server.
iPhone 5s Version 8.1.3 (12B466)
iPad 2 Version 8.1.3 (12B466)

Can't access my Directory Server using the Console installed on a machine

Similar Messages

Maybe you are looking for