Can't access my ipad
Can someone please help?
I can't access my ipad, every time i switch on the ipad i get the message "Not enough storage - This ipad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in Settings" but everytime i press settings it doesn't do anything.
I've tried to shut down the ipad by pressing and holding the sleep/wake buttom until the red "power off" slider a appears but when i try to slide it, it doesn't work.
Please help!
Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
I tunes store seems to be down in germany. can't access from ipad, apple tv and iphone
i tunes store seems to be down in germany. can't access from ipad, apple tv and iphone
me too in germany. all out of work
-
How can the 4 numeric pass word be recovered from my ipad mini, I didn't enter a code, it just showed and I can't access my ipad.
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
BTW, this is the iPod touch forum -
can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".
Try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons -
HT4113 i can't access my ipad what can i do?
i can't access my ipad what can i do?
Salim Alamri wrote:
i didn't get an answer for my requested question !
Yes you did. Everything you need to know is in the link I posted.
DId you read the whole article?
It answers your question.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
Just updated my iPad to iOS 7 and it doesn't accept my password so my iPad is disabled. Information on unlocking using iTunes asks me to turn off Find my iPad. This is impossible as I can't access my iPad. Any ideas?k
Try reboot ur ipad... press home and power buttons until apple logo com up and then release it.
-
HT201210 After update I can not access my ipad 2? Restore won't work get unknown error 3004
After update I can not access my ipad 2? Restore won't work get unknown error 3004
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things
Settings>General>Accessibilty and turn off white on black.
Matt -
hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!
I had the same problem but looking at what everyone else said, I simpley slowly started to click on all the tabs in the app store, let them load completely, and then clicked back to the updates afterwards. It worked after a little while
-
my children enters wrong password several times on problem my ipad ..., the was it is indicated that it was disabled ... how can i access my ipad thanks please help ... thank you
If it's reached the point where you can't try re-entering the code then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it - from http://support.apple.com/kb/HT1212
If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 -
Installed update now i can't access my ipad
installed update now i can't access my ipad
Howdy daffeone,
Welcome to Apple Support Communities.
It sounds like there may be an issue with iPad not responding or starting up normally since updating iOS, if that’s the case, try the troubleshooting suggestions in the article linked below.
iOS: Not responding or does not turn on - Apple Support
Take care,
-Jason -
I can't access my ipad password incorrect
Help! Everytime I open my ipad, a message comes up that says: Password Incorrect. Enter the password for the Hotmail account "Hotmail". I've tried my hotmail password - no luck. I've tried old passwords, new passwords, passwords for my itunes, passwords for my ipad... no luck. I can't access anything on my ipad until I enter the correct password. HELP!!!
Something sounds very wrong... I'd recommend restoring the device if you can't access ANYTHING at all. Or try and make a booking for an Apple Retail Store if there's one near you.
Restoring obviously isn't a prime option, but if you can't access anything, it may be the only one really, if you can access the settings you can delete and re-add the account, which would fix that 'Enter Password' message -
TS4036 can't access my ipad screen due to icloud backup notification stuck on
i can't access turn off , power on, i can't do anything is there a reset button on the outside???? this is because the icloud backup notice which sys this ipad hasn't been backed up in 2 weeks. backups happen when this ipad is plugged in, locked, and connected to wifi. then you have to press ok but it won't press do anything. please help
I got told to hold down the off button on the side and the button on front side screen together this will reset the ipad which I did and it worked. Just though I would let people know if they have a problem.
-
hi i have just got a ipad mini and have set the password and cant remember it how can i access my ipad
There are instructions on this page for how to reset your iPad : http://support.apple.com/kb/HT1212
-
Thisd morning I was not able to access my Ipad anymore. It says 'IPad not Backed up' and even when I click on OK, nothin g happens. I tried to turn off and on the Ipüad and even took out the SIM Card, but nothing.
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your iPad again
Maybe you are looking for
-
PI 7.1 in a cluster environment (multiple ip-adresses): P4 port
We want to install PI 7.1 on unix in a cluster environment.Therefore we installed also DEV+QA with virtual hostnames like the prodsystem, which will be later installed. At all sapinst installation screens we have used only the virtual hostname <vir
-
Drivers for HP LaserJet Pro 200 color MFP M276nw and MAC
My pc has recently been updated with Maverics 10.9, I've installed the drivers from this website and the CD, but eveytime I print the pages come out blank. Please help asap.
-
Issue with saving sales document.
Hi, I have an issue with saving the sales document. When I save any sales document ( Order, Quotation, Contract, Delivery) its successful and showing document no in the information bar. But when I try to view or change the document, it shows no
-
Problem in updating files in BPM
Hi , I have a question where I need to append two files and send them as one file at the receiver by using a coorelation. Lets Say we have two files -File A and File B both in delete mode .Both are required to be appended and sent as one file ,say A
-
Big file saving question.
Dear all, I am writing a foto ablum application in RIA.I want to save all the fotos in bytearray,and then save it as a file in user's computer,so that the user can open their file to retouch without downloading or uploading. Question is that I afraid