Can't access my profile or my notifications

I can't access my profile of my notifications via the "Your Stuff" menu...
It says :
"Not Found
The item does not exist. It may have been deleted."
which doesn't make any sense since I'm using my profile right now to write this message...
It might be because of my username? (because of the 2 '/' ?)
In that case, is it possible for an administrator to change it ?
The same thing happens on Safari (5.0.5) or Firefox (4.0).

Hi -
It probably is because of the 'special' characters in your chosen username - when I just now tried to access your public profile by clicking on your icon, I got the 'not found' intercept. BTW, your icon is not showing, either - another symptom that the software is balking at finding your stuff because of a name conflict.
I'll notify your post - nothing bad, just an alert to one of the hosts to see if they can get it resolved.
Edit - - Done.
Had a thought... If you do not have a lot of effort invested in this account yet, i.e. not a lot of questions, answers, or points, you might consider the real simple solution - abandon this account and create a new one, one with a username acceptable to the system.

Similar Messages

Can't access any profiles

I can't access any profiles. The mouse moves but won't click on anything. Not a mouse issue.

Hello Tish1949,
After reviewing your post, I have located an article that can help with startup issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Here are a few tips from the article you may want to consider:
Try Safe Mode
If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, might allow you to start up your computer successfully. To do this, follow these steps:
Start up in Safe Mode.
After the system has fully started up, restart your computer again normally.
If your Mac successfully restarts, the issue should be resolved. If the issue continues, try using Disk Utility.
Try Disk Utility
Use these steps to use the Disk Utility app to verify or repair a disk.
If you're using OS X Lion or later, start the computer from Recovery System or Internet Recovery. If you're using an older version of OS X and your computer came with a Mac OS X Install disc, insert the installation disc and restart the computer while holding the C key instead.
When your computer finishes starting up, choose Disk Utility from the Utilities window, or from the Installer menu if you're started from an installation disc.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Startup Disk (usually named "Macintosh HD").
Click Repair. Disk Utility checks and repairs the disk.
Tip: With Mac OS X v10.6 and earlier, always start up your computer from an Install or Restore disc when using Disk Utility to verify or repair your startup volume. Otherwise, you might see some disk error messages.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can't Access Myspace Profiles via Safari/Firefox/Explorer/Opera... help?

Hi,
I can't access 95% of all the profile pages I try to view on Myspace. It starts loading and then I get the spinning beach ball. I did some experimenting, and I turned off Javascript on Safari and they started loading again, but I can't access a lot of features-- I couldn't even log into this discussion without Javascript!! I think my javascript is corrupted. Is there a way to replace my javascript thingy? I'm really upset about this. My software is all up to date, as are my permissions. Any advice would be helpful.
~Patrick

Same here. Permissions repaired, PlugIns removed and reinstalled one after another (InputManagers: Chax, Menu Extra Enabler, PicLens, SafariBlock, SafariPlus, SIMBL), reinstalled flash, DivX, Flip4Mac, Perian. All up to date. But whatever I do, I can't access (most of the sites of) MySpace, YouTube, etc.! No difference whether I use Safari, FireFox or Opera: The processor speeds up to 100% and the beach-ball goes spinning round and round and… The only (but radical) solution than is pressing the power-button! I had this problem with Safari 2, I have it with Safari 3, and I definitely don't know what to do! Hoped with every update, but…
I don't know if that's a problem with flash or JavaScript or something completely different, but I can't see why Apple does not get that fixed! I mean, I'm really not the only one being frustrated by surfing the web while more and more blogs integrate YouTube-Videos… That's no fun using a mac!

I have just downloaded firefox on windows 7 but when I try to open it says it can't access the profile

I have just downloaded firefox on windows 7 but when I try to open it says it can't access the profile

Have you tried to run firefox '''as an administrator''' ?

How can I access my profile backup if I have forgotten my password?

I inadvertently restored the factory profile settings. I have the backup file on my computer - but I can not remember the backup password. The MUST be a way I can access the backup file to restore my data. Help!

You cannot. That is the point of password protection.

Can't Access System Profiler Or Disc Utility

Hi! I have a iMac G5 With leopard software, 10.5.8 version. And I can't open the system profiler or disc utilities at all. I've tried everything basically, Should I reinstall my Leopard software?

Something that came to mind after rereading you post relates to the particulars of a "hard" reset on the Snow.
A “hard” reset removes current setting from the base station. You must then connect to the base station using the AirPort Admin Utility and upload AirPort 2.0 or later software to return the base station to its default settings. A base station in a hard reset is only accessible through the LAN port, not via wireless connections ... so attempting to access with the AAU, via a wireless client, will not work.
The following is the process to reload the AirPort software: AirPort Base Station (Dual Ethernet) : How to reload software from Mac OS X

Can I access my iTunes account from a separate computer or profile?

I can't access my profile on my mac (separate issue). All I want to do is back up my iPhone/sync music using my iTunes account
Or
Access my iTunes account via her profile.
Is any of this possible?
Please help

Oops, I mean I'd like to use my wife's profile to access my or her iTunes account to sync my iPhone, hope this makes sense

Viber can't access Push Notifications

I deleted Viber from my Iphone 4, after it duplicated and scrambled the Viber address book. Reinstalled the App, and now get a error message saying "Viber can't access Push Notifications". Checked Settings/Notifications, and Viber is "On". Tried the solutions offered by other Iphone users a) Entered 8.8.8.8,8.8.4.4 into my wifi DNS. Does not work. b) Depressed the power button and home button at the same time to "force" the App. Does not work. c) Installed Ipush Test App. Does not work.
My phone is not jailbroken, Viber worked before, every App that uses Push Notifications work, reported the problem to Viber, no response!! Can somebody HELP me. This App is driving me CRAZY!!

Hi,
This is a member of the Viber R&D Team!
Please check the following link for further information regarding this issue: http://helpme.viber.com/index.php?/Knowledgebase/Article/View/38/0/push-notifica tions-for-iphone---how-to-enable
If anyone has any questions/suggestions for Viber, please feel free to let us know, and we will address them shortly.
Thanks,
Viber Team

How can I access an unsupported usb device that's seen by system profiler

is there a way to access an unsupported usb device? my parents bought my daughter a cheap and easy to use digital camera and I am looking for a way to access the photos. the camera's manual mentions that there is no mac driver and there are no plans to develop one. I plug it in anyways in the event the system / Iphoto recognizes this, But I get nothing on the desktop as in a generic disk image icon. I open system profiler and My G4 knows the camera is plugged in. If this interface between the two is recognized how can I access the camera?
does a driver have to be written to allow access? I saw a usb dev kit on version tracker but I have no clue as to how to write a driver. I could get a flash card reader but I was hoping that there may be some back door or an app somewhere to allow me to get the photos off the camera.
thanks!!!

Hi, Israel.
You wrote: " I plug it in anyways in the event the system / Iphoto recognizes this"See if Image Capture recognizes the camera. Launch Image Capture, which is in the Macintosh HD > Applications folder.
Otherwise, you're probably going to have to go the route of using a card reader. While the connection may be USB, they may be using some non-standard implementation that requires a driver.
Writing drivers is not something you'd want to even attempt since you didn't create the hardware!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How can I disable ALL public access to profile dat...

I don't know how you Micro-shunts manage to do it, but ever since the forced migration to the Micro-shunt version of the Skype client, it is getting prgressively worse with every iteration. I'd been a very happy Skyper until the enslavement -- sorry, forced migration. ALL of my profile information (what little there was) was 100% private, I only gave my contact details to people I wanted to have it. I was never plagued by spam, never bothered by block-avoiding boojums. Since allowing the current horror onto my Mac, I get over a dozen complete randoms -- all of them with dubious female names from far-away lands -- with contact requests per week, and in the space of the six hours I mistakenly had my mobile phone on my profile, I received four spam SMSes, all of which I was charged to receive. I soon put a block on those so-called premium SMS services. So far, Microsoft, you have taken away much of what makde Skype, and given nothing but frustration (and windows three times larger but holding a quarter of the information) since you took over. Now, please tell me, dear Micro-machines, how the BLEEDIN' 'ECK do I turn off ALL my private information that you are currently putting up on public display? I DO NOT want to be searchable. I DO NOT want to be pestered. Please restore the option for this. The paid offer of a VPN to the Chinese MSN network is looking more appealing by the day, and I'd rather spend money so I don't get hassled than put up with the torture of the past three months.

Hi, Hyram, and welcome to the Community,
I am a PC, so this is how I would accomplish your goal (I recommend performing these procedures via a computer rather than a mobile device):
Access your profile from your account (where the Contact list is), and you should be able to remove all information which defaults to public view, leaving the choices as "blank" or "not specified."
Check your privacy settings to ensure they indicate you receive audio calls, video calls, and private messages from people on your contact list only. Remember to Save your changes.
You must contact Skype Customer Service to request your account name be removed from the search directory. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service As you know you wish to contact Customer Service, skip past Step 2 of the instruction where you will see various FAQ articles and other information to review and proceed to Step 3, Continue Support Request. I find it easier to sign on to the Skype website and then go through the contacting Customer Service routine.
I still receive random, occasional, unsolicited contact invitation requests, however far fewer than previously.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I have an old user name tht is no longer accessible. I access fierfox through a new user name. I have copied the profile from the old user name. Can I have 2 profiles from which to choose when using firefox in the under the new username?

I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
Thank you

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Can't access my camera color profiles in Photoshop CC 2014 latest update under Yosemite

I normally have profiles for each camera made by X Rite Color Checker and these are available when processing RAW files. Under Yosemite on a new 2013 Cylinder Mac Pro, Photoshop RAW developer cannot access the profiles.
I discovered that the Adobe Submenu "RAW" was missing so I copied it from my Mac book Pro. however, the profiles still cannot be accessed by Photoshop CC 2014 on this computer.
Any ideas?
As a secondary issue, Adobe DNG maker won't accept RAW files from my Sony A7R, but it did in the past on the Macbook pro running Mavericks.
Thanks for your insights,
Asher

OK, I am not entirely sure I have understood your post completely, but when you edit a colour range with a Hue/Sat layer, and click off and back on again, it will default to showing the RGB values, which you may not have made any adjustment to. If you pick the previous colour from the image, or a similar colour, it _will_ show you the adjustments. So long as your picked colour is contained within the range of the previous adjustment.
Ypu could also use the RGB drop down (actually they call it Master nowadays), and chose the colour that is closest to your previously picked colour. I expect you are away that you can edit the colour range being operated on by dragging the four sliders on the two colour bars at the bottom of the Properties panel.
Does that make sense, or am I going in the wrong direction?

Can't access my PING Profile ( error 5002)

Please help. I have created a Ping profile. For some reason, I can access all the Ping pages but My Profile page. When I clicked on My Profile page, I am getting a 5002 error message. I thought it might be my iTune 10 on my iMac must be corrupted, I decided to login my iTune account using my Macbook Pro and I still get a 5002 error message when I tried accessing my Ping Profile page.

Hmmmm...interesting. I get a message saying:
+We could not complete your iTunes Store request. The iTunes Store is tempoarily unavailable. (5555)+
I only get that when I click on 'Edit Profile' in Ping. I can still access and purchase from the iTunes Store.
Seems to me Apple haven't quite thought this thing through....

Can't access my Game Center profile

After upgrading to iOS 7.1.1 I can't access my gamer profile. It states it's already in use. I've tried my email addresses. Any suggestions?

okay. I figured out that I created my Game Center profile under an account on it's own. How can I merge it into my apple id?

Can't access emails in notification.

Hi,
I can't access the emails in notification.
I get the following error
E:YMTI:299 ADDR_PERS_COMP_COMM_GET 0

Hi,
This is the Functional Module which is getting called while executing Email trigger functionality. Please check in User Master Data whether EMail ID has been maintained or not.
ADDR_PERS_COMP_COMM_GET => Get additional user address details not retrived by SUSR_USER_ADDRESS_READ (i.e. email address)
[Configuration for Mail Service|Sending SAP Script Output to Mail & Fax;
Re: Database error for <ADDR_PERS_COMP_COMM_GET> <0>
Regards,
Maheswaran.

Can't access my profile or my notifications

Similar Messages

Maybe you are looking for