Can't access my SPA2102 when connected to my BEFSR41 router

Hi All,
I have a Linksys EtherFast Cable/DSL router #BEFSR41 to which I have two computers, one printer, and one Linksys PAP2T-NA connected.  I purchased a SPA2102-NA because I need two additional phone lines, but I had no more router ports.  I was told that the SPA2102 could be connected to the router and my PAP2T could then connect to the LAN port of the SPA2102.  Well I tried connecting the SPA2102 to my router and then connecting my PAP2T to it, but I am not able to access the configuration/setup menu for the SPA2102.  How can I configure this SPA2102 when I can't even get to the setup menu?
Please help, I have spent the entire day searching the Linksys knowledgebase, etc. and I can't figure out what I need to do to access this unit.  By the way, when I go into the router configuration menu and list the DHCP Active IP Table, the first item is SipuraSPA with an IP address of 192.168.1.100 (my PAP2T is 192.168.1.104).  I have tried accessing the SPA2102 by typing 192.168.1.100 but I just get a browser error "Page not found".  So the SPA2102 is showing up as connected to my router, but I have no way to connect to it because it has been given a dynamic IP address by the router.  How can I solve this problem?
TIA

Thanks HW for your reply.  After further consideration, I've decided that my best solution is to add an 8-port switch to increase my network capacity and therefore I can replace the SPA2102 with a simpler PAP2T, giving me two PAP2T's.  I'm afraid I was looking at the SPA2102 as a stop-gap measure in providing an additional LAN port, but that would leave me without any spare LAN ports for the future.  In the end, the small cost of an 8-port switch will give me future capacity and allow me to use the less costly PAP2T while gaining what I needed in the first place.  Sorry for taking up your time.
Thanks.

Similar Messages

  • I have a lot on books on my Kindle account. I have downloaded the app onto my IPAD but can only access my books when connected to WIFI, i would like to read them offline. Have I missed a download step. Thanks for any help you can give.

    I have a lot of books on my Kindle/Amazon account. I have downloaded the Kindle app onto my IPAD mini by can only access my books when connected to WIFI, how can I read them off-line?

    Yes, you've missed the download step.
    Open the Kindle app and navigate to your Library. There is a tab at the bottom that says Cloud | Device. Tap the Cloud tab and tap the books you want to download to the device. You will see a progress indicator during the download. Once it's done, read away!

  • I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

  • How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?

    How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
    Tried connecting to itunes and hitting restore and get a error message 3194.
    Any help would be greatly appreciated.

    odds are entering password too many times

  • I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

    I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

    but in the home with wireless internet access , it is continued when off, sometimes can not working,
    What does "it is continued when off" mean?
    And the same for "somtimes can not working"?

  • I can not access the hard drive connected to my airport extreme!  Any thoughts?

    I can not access the hard drive connected to my ariport extreme.  When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
    Any thoughts.
    A

    Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
    If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
    If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
    Finder Preferences > General > Show These Items on the Desktop > Connected Servers
    Then with the Finder menus displayed at the top of the screen click the Go menu
    Click Network and the AirPort Extreme icon should be displayed
    Double click the icon to mount the drive on the desktop

  • TS1567 My apple iphone is not getting started and i can find only apple logo when connected to system\

    apple phone 3g is not getting started and i can find only apple logo when connected to system and my system is not recognizing the mobile device. kindly help me in this regard

    Put the device in DFU mode (google it) and restore as new.

  • Can not access email addresses when they are a link. F/F goes nuts and "untitleed " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down thwe computer.

    Can not access email addresses when they are a link. F/F goes nuts and "untitled " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down the computer

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • HT201365 my iphone has been stolen, but my iphone  have passcode and i put  airplane mode. my question is can someone access  my phone  when they bring to shop?

    my iphone has been stolen, but my iphone  have passcode and i put  airplane mode. my question is can someone access  my phone  when they bring to shop?

    Not without the passcode.

  • Please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

    please help. my address bar has vanished. i have no idea how to retrieve it, so can only access bookmarked sites when using firefox.

    Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
    * Press F11 to toggle full screen mode (Firefox/File > Full Screen)
    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
    * If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    * If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
    See also:
    * http://kb.mozillazine.org/Toolbar_customization

  • My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys., My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys.

    My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys., My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys.

    Who is your ISP?
    Power-Cycle the modem... and then ower-cycle the router...then finally power-cycle your computer.

  • Can airport express boost signal without connecting to 3wire bigpond router?

    Can airport express boost signal without connecting to 3wire bigpond router? just via wi-fi?

    The Express would not sit with the bigpond router......it would need to be located in the area where you need more wireless signal coverage.
    Assuming that you have an open available Ethernet port on the bigpond router, you can use that to connect the Ethernet cable to the Express and locate the Express where it is needed in a remote location.

  • IPAD 2 WiFi only. Can I access the Internet when I plug into my computer that is connected to a LAN?

    I just purchased an IPAD2 and I love it. It's WIFI only, and I want to access the Internet when I plug in to my computer since I don't have 3G capability. But when I try and connect it won't allow. Is this standard? Am I preventing from high speed internet access on my IPAD 2 even when my computer is connected to the Internet? Any help would be much appreciated

    You cannot access the internet through the connection to a computer hooked up to the internet.
    It may be possible to configure your PC as a WiFi access point. Check your PC documentation for its capabilities.
    Or, purchase a WiFi router and hook it up to your ISP modem. You can hardwire your PC to the modem.
    Good WiFi routers can be purchased for $30-$40 dollars if you shop around.

  • I can't access my music when i have my ipod connected... this *****...

    ok, i have a 20GB ipod with the click wheel. i heard a lot of good things about the newest version of ITunes so I decided to download it. After installing it, half of my playlists were gone... AGGHHHH!!!!
    I would be able to deal with that, but now I can not access my music. What's the deal here? I can see the songs, but iTunes is not allowing me to click on any of the songs. But when I unplug the iPod, I can click on any songs in my library.
    Can anyone help me out here? Thanks so much!!!

    Uncheck the "automatically sync" button (or it might be checking the manually manage the ipod). If you have it set to automatically sync the music, it will automatically transfer your music and playlists from your comptuer to the iPod, which means any changes on the computer get put on the iPod. If you uncheck that button, you'll have to manually manage the music, but you'll be able to access the music on the iPod. Took me a while to figure this one out.

  • Can't access some sites when using Aiport Express, why?

    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine.
    When using my network cable to connect to internet everything works fine and I can access these sites.
    Firmware is current and I've tried reseting the router to factory defaults.
    Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout.
    When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual.
    I've tried changing DNS servers to use opendns servers instead, but to no use.
    I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista- or-windows-7/), but still can't access them through ping...
    I don't know what to do anymore.... any suggestions???
    Thanks

    Hi Punice
    first try to disable JavaScript from : Firefox button (or Tools menu) > Options > Content panel > '''UNcheck''' Enable JavaScript.
    if the above does not help check with a few malware/virus scan programs for virus. You need to use all programs because each detects different malware. Make sure to update each program to get the latest version before doing a scan.
    http://housecall.trendmicro.com/ - Trendmicro online
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/antivirus-partners/windows-xp.aspx
    check also for a rootkit infection with TDSSKiller.
    http://support.kaspersky.com/viruses/solutions?qid=208280684
    thank you

Maybe you are looking for

  • Help with Library link lists ..

    Hi , I am working with Scott Mazur on a incorporating 8.1.7 in our code bace for our next product release. I am having problems with defining the library link list needed for builds. In the documentation it makes referance to $ORACLE_HOME/precomp/dem

  • "You can only read" when Read & Write assigned

    The "Backups.backupdb" automatically created on my external hard drive for Time Machine is the folder in question. I am changing the icons on my EHD folders and it has worked fine for every other folder, because I created them myself of course. There

  • Homehub 4 slower than Homehub 2

    Hi, I have just had my new hub4 and i am having trouble with the speeds being very slow, its registering speeds of less than 1mps! via wireless and ethernet on several pc's and tablets, my hub2 is registering speeds around 12mps as it always has. Sam

  • DDE performance degradation is down in Office 2013 as compare to previous versions.

    I am running my C++ application on windows 8.1 with office 2013. My application basically communicate with Excel 2013 using windows DDE protocol and populating data in Excel workbook. The problem is that DDE communication between application and Exce

  • PrPro vs AE cs5

    So I have been looking at exPanding to some 3rd party plug-ins, and some of them are only available for after effects, where as others are available for both AE and PrPro. To tell you the truth, AE really intimidates me. So I basically try to do ever