Can't access NAS200 via browser

All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset.   The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene

gene7 wrote:
All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset.   The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene
I suggest, you try using another internet browser and another computer. You may also try turning on/off the NAS200.

Similar Messages

  • Can't access photos via windows, everything else works iTunes, external software etc.

    Hello,
    Since I installed Windows 8.1 I have quite big problem, can't access photos via windows explorer. iTunes and other software can see phone and works completely fine.
    There is error 28 in device manager.
    Tried uninstalling all services including iTunes itself and got latest iTunes today and still no luck.
    Anybody knows solution to this ?
    (iPhone 4S iOS 7.0.4)

    Is it just me, who got this issue ?

  • An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.

    I have 2 WFE behing F5 that handles ssl termination too. I have a site abc.xyz.com.
    At aam i have
    http://abc.xyz.com in default zone and https://abc.xyz.com in internal zone.
    AT sharepoint content source; I have both http and https of the above site version.
    DNS entry of abc.xyz.com is pointing at VIP in f5 which load balances this site at 2 different ips assigned to each web front end server.
    Now when i run search in this content source, searchable item populates but there is error for http request telling An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.
    Why is this happening?
    Is it because requests are coming to f5 as https but search is returning it as http? Will SSL termination removal from f5 solve this issue which i really don't want to do? Will pointing dns entry to two ips in wfe instead of f5 VIP will work?
    Adit

    Hi,
    I have seen a similar post from you, my understanding is that when you ran search in your content source, there was an error. You can take a look at the following thread:
    http://social.technet.microsoft.com/Forums/en-US/94e999e3-4128-4674-97dc-e46e71fe0f46/search-service-setup-behind-f5-an-unrecognized-http-response-was-received-when-attempting-to-crawl
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

    After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

    Settings > General > Reset > Reset Network Settings.

  • Can not access internet via wired connection, wireless working OK

    Background information,Came home from vacation turned on PC to access email.Emails started downloading then stoped,started getting messages that firefox stopped working and Thunderbird quit working and others.My desktop is attached to a verizon router.all my other devices are wireless and are working fine through the same router.I connected my laptop to the lan connection, turned off wifi and accessed the internet via lan connection.Using device manager, checked drivers, says up to date, also says that it is working properly.I have gone to the command line and can ping google.com.I can ping the loop around. ping127.0.0.1I have done the ipconfig/release,ipconfig/renew, and ipconfig/flushdnsipconfig/all indcates that it is there and enabledMy Lan connection is part of the mother board.can not access internet via wiredconnection.Not sure what to do next.Help Please   

    Reply: I spent about an hour last night doing all the things that you suggested including moving the lan cable from my desktop to my laptop which worked fine. When I hoover over the connection it says;  Network3                                                                                        Internet Access   no error messages.When I unplug the cable at the router a red x covers that connection icon.Plug it back in red x goes away.It is seeing the router, just does not appear to be providing selected web page info.Computer thinks it is working fine.

  • Can,t access wifi via airport after left my mbp idle for just 1 minute

    i can,t access wifi via airport after left my mbp idle for just 1 minute, i need to turn airport off & turn airport on if i left my mbp idle for just 1 minute or less...why this thing happen? anyone can help thanks in advance

    Something that came to mind after rereading you post relates to the particulars of a "hard" reset on the Snow.
    A “hard” reset removes current setting from the base station. You must then connect to the base station using the AirPort Admin Utility and upload AirPort 2.0 or later software to return the base station to its default settings. A base station in a hard reset is only accessible through the LAN port, not via wireless connections ... so attempting to access with the AAU, via a wireless client, will not work.
    The following is the process to reload the AirPort software: AirPort Base Station (Dual Ethernet) : How to reload software from Mac OS X

  • Problem accessing em via browser

    Hi,
    Anyone know what the problem? I got the error message from the sysman/log folder. Anyone know where i can find the documentation of the setting up of oem?
    Beside starting the dbconsole service, what others services and things need to be started or done before i can use em via browser. (http server, any agents, set up repository)
    Currenlty I managed to load the http://<host>:5500/em page. Although the database instance is already started up, the web page still indicate that the db instance is down and need to be started up.
    Check the sysman/log folder and found the below error message from the trace files. Anyone know what the problem?
    2005-03-28 12:47:44 Thread-5 ERROR command: nmejcn:
    received no status header from epository at
    http://slasun11:5501/em/upload/ sponse header from repository
    Thread-810 ERROR pingManager: nmepm_pingReposURL:
    Did not receive a response header from repository

    According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

  • My new users can not upload files via browse

    Hi there;
    When my recent created users can not download files via the browse within the Internet interface.
    When I hit the via browse I face the following:
    500 Internal Server Error
    oracle.ifs.common.IfsException: IFS-10406: Invalid AttributeValue conversion (DIRECTORYOBJECT to Java DirectoryObject)
    oracle.ifs.common.IfsException: IFS-10200: Unable to access object (insufficient privileges)
    Any hint?
    Sasan Ebadian

    Hi Sasan,
    These are the ACL's of IFS:
    PRIVATE Grants no permissions to any other user. Other users cannot view, modify, or delete a user’s document in any way, unless changed by the owner.
    PROTECTED For folders only. Enables other users to see the files in the folder, add documents and folders to the folder, and remove documents and folders they have created from the folder, but are not allowed to delete the folder itself.
    PUBLIC Allows full access to the item. All users can make any changes that the owner can make.
    PUBLISHED Allows other users to view the contents, but they are not allowed to modify or delete the document.
    If you attach the ACL Public it must work!
    Bob

  • Can't access cluster via SQL Server Mng Studio unless node has ownership

    Hi:
    We have Windows and SQL 2008 R2 in a 2 node cluster. Failover and failback work like a dream. All the 'lights' are green. But we can only access the cluster when we're on the node that has ownership. I've deleted all DNS entries and successfully recreated
    them via ipconfig /registerDns from each node, shutting down, restarting the actual cluster and taking the application and service offline then back on line. All DNS records got recreated perfectly. Cluster error log doesn't show anything when we
    can't connect either. We can also ping all IPs, Hostnames and Clustername.

    Hi g_machuca,
    According to your description, you want to implement failover and failback in SQL Server cluster environment. We need to verify if The cluster group containing SQL Server can be configured for automatic failback to the primary node when it becomes available
    again. By default, this is set to off. First you set a preferred owner for the SQL Server service in a clustered environment; To ensure the service or application automatically moves to the correct node, select “Allow Failback” under the Failover tab. . 
    Auto failback saves you from having to make this change manually; however it will restart the SQL Services when it automatically fails back. Or if you don’t want to configure auto failback you’ll want to make sure that you manually fail the services
    back to the more powerful node after the system has come back online.
    There are details about failover cluster allows automatic failback, you can review the following articles.
    http://www.mssqltips.com/sqlservertip/2672/managing-a-windows-and-sql-server-cluster-using-the-failover-cluster-manager-tool/
    http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
    For more information about troubleshooting Windows Server 2008 R2 Failover Clusters, you can review the following article.
    http://windowsitpro.com/windows-server-2008/troubleshooting-windows-server-2008-r2-failover-clusters.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Can i access internet via apple tv

    Can I access the internet via Apple TV? I would like to watch BBC iPlayer and use last.fm, for example.

    http://www.apple.com/appletv/
    the internet services the atv support are listed on the site
    the only way for the atv to work with the items you mention is by using airplay from an iphone or ipad or ipod touch

  • Security photo - does not show any apps that have requested access. I can not access photos via apps. How to fix it?

    Apps can not access photos.
    Apps never asked if they could access photos.
    Security>Photos  - there are no apps on the list.
    I have restarted.
    Backed up, restored.
    No improvement.
    Thanks.
    ps my iphone allows access, so I know 'how' to do it usually.

    Found the answer:
    Go to settings/general/restrictions/photos and allow the apps to have access to photos

  • HT1657 I've rented my movies on my laptop.  How can I access them via my i pad?

    I rented several movies and downloaded them to my computer? Can I access these rentals somehow without renting again on my ipad?

    You will need to connect the iPad to your computer's iTunes and move them over to the iPad (similar to how you sync other content from your computer) - rentals are one-time only downloads, so you can't download a copy of them on your iPad. From the page that you posted from :
    If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.

  • Can't access menu via shortcuts

    How would I return a Control-S (Save current page as...) functionality? Currently does nothing when I press this key combination, nor can I access any menus using their underlined first letter.

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Can not access DTR via NetWeaver Developer Studio

    Hi all,
    I'm able to access DTR in the browser with this URL :  http://<servername>:50000/dtr
    That's good.
    Now ... I specified the same DTR server URL when creating a new DTR client in NWDS.
    When I tried to log on it says :
    Ping on server http://<servername>:50000/dtr/ returned: 401 Unauthorized
    User not authorized for server http://<servername>:50000/dtr/
    Howcome I can login via the browser but not via NetWeaver Developer Studio ?
    Can anyone help me with this issue plz ?
    Kind regards,
    Abjuh

    Hi Slava,
    Thx for your answer.
    Indeed my user & paswords where different on some systems.
    Now I made sure that all usernames & paswords are the same on every system.
    Issue solved !
    Thx & regards,
    Abjuh.

  • Can't access Internet via Ethernet port of 'n' Express in 'Extend' mode

    I just purchased the new Airport Express (AXp) n version for the purpose of extending my Airport Extreme (AXt) n version wireless network so that I can connect my old MacBook Pro (MBP) 17" core duo, running Mac OS X 10.5.2, to the AXp via an Ethernet cable when the MBP is stationary at my desk, in order to increase the maximum speed at which I am able to access the internet, from 54 Mbps for my MBP's internal wireless g card to 130 Mbps at which the AXp runs in the following configuration.
    On the AXt, I set the wireless mode to create a wireless network, checked off the option to allow this network to be extended, set the radio mode to n (b/g compatible), set the channel to 11 (works best for our house), and set the wireless security to WPA/WPA2 Personal. On the AXp, I set the wireless mode to extend a wireless network, unchecked the option to allow wireless clients (I have also tried this option checked, as well), and set the wireless security to WPA/WPA2 Personal. Both Airport bases are running firmware version 7.3.1.
    When I do this everything looks fine. My network preferences indicate that I have a valid IP address, and I am able to see and screen share with other computers on the local network; however, when I try to access the internet using Safari 3.1, I get a timeout error message indicating that the server I addressed is not responding. Then when I run the diagnostics from the network preferences, it indicates that my internet connection appears to be working correctly, and all the network status lights show green.
    Any ideas?

    Thanks so much for all your replies. I will try to address all the points in this reply.
    99, I think you are right, about Apple not supporting using the Ethernet WAN port as a LAN port when the AXp is in the "Extend" mode. However, I had read on the Apple website that it does support using the AXp WAN as a LAN in the WDS "Remote" mode, as you have verified with your older AXp, and which I had also verified with my new AXp. The only problem was, when using the AXp in the WDS "Remote" mode, the AXp ran ONLY at 54 Mbps, even when there were no additional wireless clients connected to it or to the AXt, which kind of defeated the purpose of using the AXp as an Ethernet bridge in the first place.
    The only way I could get an AXp bridge to run at 130 Mbps was to use it in the "Extend" mode or the "Join" mode. In the "Join" mode, using the WAN as a LAN works fine when connecting to the Internet, but I am not able to see or screen share with any of the computers on my local network. In the "Extend" mode, I am able to see and screen share with all the computers on my local network, but I am not able to get to the Internet, even though the Network Diagnostic tool reports that my Internet connection "appears" to be working properly, and it gives me all green lights (and as near as I can tell with my limited knowledge of DNS, all that information appears correct, as well).
    Bottom line, I don't think Apple has properly enabled the AXp's WAN as a LAN in the "Extend" mode, as they have in the "Join" mode and in the slower WDS "Remote" mode.

Maybe you are looking for