CAN'T ACCESS NEWLY CREATED IRM 2007 DOCUMENT

I created 2 documents in 2007 and used IRM - what a mistake - now I can't access it because it says i don't have credentials.  I am the only one who created it and used my hotmail.com email.  HELP ME PLEASE :(((((

ahh so easy when you know how! thanks for your help appreciate it.
Regards
forhad

Similar Messages

  • How can i add newly create infotype in t.code po13

    Can any one pl tel me how can i view newly created infotype in t.code PO13
    Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

    See:
    Mac OS X Automation,
    Automated Workflow Tips,
    Introduction to Automator tutorial, and
    a four-parter on Automation in Snow Leopard by Sal Saghoian:
    Snow Leopard Services,
    Services for iPhoto,
    Safari and WebKit integration, and
    Installing and using services.
    Finally, 
    Developing AppleScript Applications and
    Apple's Automator Developer Documentation

  • Can't access the Create or Share Menus, using Window 7

    Using Windows 7, I can't access the Create or Share menus, please help

    Hi,
    Did they ever work and have just behaving like this or is this a new install?
    Does the user that you are running under have administrator rights?
    Sounds like it was a bad install, have you tried uninstalling/re-installing?
    Brian

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • Can we access tables created internally for Business objects in CAF

    Hi,
         When we create and Deploying Business objects in CAF then internally it creates tables in Oracle/Maxdb database. Can we access those tables through CAF.
              Or is it possible for Oracle to access the Business objects tables which are deployed on SAP Web Application server?
              We can configure the Oracle driver in the SAP Web App Server. But how can we use it?

    Hi Rohit!
    Can we access the tables created internally for BO's without the use of CRUD methods provided by them.?
    Or
    Can we fire queries on these tables through Oracle.? As the tables are created along with BO's in the database.
    Maybe, you can do that, but why do you want to do that?
    Based on the Entity Services (i.e., CRUD and find operations) that are generated for your BOs, you can implement Application Services which contain any business operation that you want to perform. Furthermore, you can expose your Application Services as Web Services. That's the designated way to do that.
    Manually manipulating the underlying database tables does not sound like a good idea.
    Best regards
    Alexander

  • How can i access and assign java xml Document variable in javascript block

    How can i access and assign org.w3c.dom.Document variable in javascript block
    I tried this xmlDoc = "<%=xmldoc%>";
    it is not working
    plz give me solution.
    thanx
    Vidya

    The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
    It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

  • I have a macbook pro and installed the latest version of numbers but can't open or create a new document

    i have a macbook pro and have installed the latest version of numbers but can't open or create a new document

    Melting,
    Can you share any information regarding what you have tried?  To create a new document select the menu item "File > New..."
    What documents have you tried to open and what happened when you tried?

  • HT1925 Trying to download, getting message "can't access, was created in earlier version of iTunes."

    I'm trying to download to my iPOD and my MP3 and I keep getting a message that says it cannot access my files because it was created in an earlier version of iTUNES.

    Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
    I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
    I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
    Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason.

  • Can I access an element in parent document from Edge Animate Function?

    Hi, Very, very new to Edge Animate.
    I want to know if I can access elements in the parent document from the Function I attach to the Stage or other element within my animation.
    i.e. the equivalent of window.parent.document.getElementById
    I notice that the function automatically passes 'sym' which I'm guessing is the animation document reference so can I get to sym.parent?
    Sorry if this is a bit basic but it is really new to me.  Thanks.

    Hi,
    I had a similar issue, the need to access a DOM element of the Dreamweaver index.html file from within the Actions panel of my Edge composition.
    In my example, I have a <div> in the index.html with id="footer".
    This is how I obtained a JQuery style reference to the element within the composition's Actions panel:
    $("#footer", window.parent.document)
    This allowed me to access attributes, like this:   $("#footer", window.parent.document).html()... or you could assign it to a variable, like this: var myFooter = $("#footer", window.parent.document);
    Hope that helps!

  • Newly created follow-up document is inactive

    Hi Forum,
    I have just  created  a follow-up document for my service order and created a target transaction as another serv order document  through copy control.
    The target Service order is showing in the create follow up documents in the main menu, but it is inactive, rest other follow up documents for the source service order transaction are active.
    Please help me by letting me know how to make this follow up document active.
    Another workaround that i have checked in SAP help is that we have made this in the same organisation unit.
    Regards,
    Amit

    Hi,
    Have you maintained all the copy control settings like
    1. copy control for transaction types
    2. copy control for item categories
    3. copy control for target transaction and item categories
    Also check whether the permitted channels is not maintained for the target transaction.
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Can't see/access newly created chat rooms

    We have an issue where users can create chat rooms but are unable to see/access them after they're created. Does anyone have any experience with this and knows why this happens and how to fix? Thanks.
    Mike

    MFischma,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • I can't access to a PHOTOSHOP CC document.. (ADMIN PERMISSION) then the document is erased. Is no longer on my computer!

    Help me!
    I was working on PHOTOSHOP CC as usual, but when I saved it appears a message that says: Look at PROPERTIES in photoshop cc because it has special permissions.
    Then I close PHOTOSHOP as I knew I was saving in good short periods of time. But when I enter again to the ORIGINAL document it also says that I could not access.
    Finally after a long period of serching for a solution... the document was no longer in my computer!!
    WHY photoshop is that cruel with any of this ERROR circumstances!
    CAN I RECOVER MY DOCUMENT?
    P.D: Is not the first time I have the same problem! But it is the first time I loose all the information

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Can't access object created in the view from controller

    Hi
    In the view, I create a simple HTML control with a DIV tag.I need to access the DIV tag from the view.  The function this.getView().byId() returns nothing.
    view
    createContent : function(oController) {
                            var aControls = [];
                            var html = new sap.ui.core.HTML(
                                        content : "<div id='obj1' style='width: 300px; height: 200px;'></div>"
                            aControls.push(html);
                            return aControls;
    controller
    onInit: function() {
    this.getView().byId("obj1");
    Thanks.

    Hi Chen,
    The reason for this is the at
    this.getView().byId("obj1") would only work for XML views
    but for JS views
    sap.ui.getCore().byId('obj1') would work
    The difference between JS views and XML views is that the id's on DOM are different for JS view each control would get the same id as used in the definition but for XML views the id would get generated.
    Hope this helps.
    Thanks and Regards, Venkatesh

  • Can't select newly created css styles

    Help!
    After I have created a new css style, there is no way that I
    can apply it.
    The new style appears on the right-hand-side under Design -
    CSS Styles, but I can't select it in the Properties - Styles drop
    box neither if I select the text - right click - CSS Styles. It's
    not there......
    What am I doing wrong?

    What is your new style's selector, e.g,
    #foo, or .this, or what?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Slumpsum" <[email protected]> wrote in
    message
    news:ee6cfg$sg5$[email protected]..
    > Help!
    >
    > After I have created a new css style, there is no way
    that I can apply it.
    > The new style appears on the right-hand-side under
    Design - CSS Styles,
    > but I
    > can't select it in the Properties - Styles drop box
    neither if I select
    > the
    > text - right click - CSS Styles. It's not there......
    >
    > What am I doing wrong?
    >
    >
    >

  • SharePoint Workspace: How can I access synced files in Office Document Cache?

    I have the following Scenario and I'm struggling on the Office Document Cache, I hope someone can help.
    * Document Library / SharePoint Site on SharePoint Server 2010 holding PDFs, Office Documents, videos etc.
    * We use SharePoint Workspace to sync the document library to Windows 8.1 Enterprise Clients and keep it up to date
    * This works fine so far. All documents are synced to the Clients and are stored in the Office Document Cache.
    * Now the problem: we want to build a Windows 8.1 Modern UI app that lists all documents stored in the Office Document Cache. We already built a similar app that is able to list normal folders stored in the Windows file system... but we can't find a
    way to do that with documents stored in ODC.
    Is that even possible and if yes, how can we do that? Are there any APIs or methods that we can use?
    Many thanks for any answer!

    Hello jh-work,
    Maybe you can find something in the SharePoint Workspace 2010 SDK:
    http://msdn.microsoft.com/en-us/library/office/hh300578(v=office.14).aspx
    - Dennis | Netherlands | Blog |
    Twitter

Maybe you are looking for

  • Defining Purchase Order Number as a Required Entry

    Dear All, I've cut and pasted the contents of sap.help.com below, I'm trying to make the Purchase order Number in sales order document a required entry but I'm unable to locate the checkbox in VD02 as mentioned in help text. can some one help me out.

  • Error on Shared Services

    I'm sorry about my dumb questions, but i have one more: Any calls of my succesfully installed, configured according to install guide and launched shared services finishing by error "UnableToCreateExternalUser". SS use Native directory SOMEONE, PLEASE

  • Getting data from external system

    Hi, What other methods that are used to get data from external system to BW? I know that DB Connect is one of the methods. Also, falt files is one of them. Thanks, RT

  • Raise Exception In For Loop

    Currently my loop code is FOR i IN 2..vt_records.count         LOOP           EXIT WHEN INSTR(vt_records(i), v_delimiter,2) = 0;             csv_to_array(vt_records(i), vt_record, v_delimiter);           --| Workaround for the case when the last colu

  • Macbook os x 10.5.8 wipe

    hello! i just purchased a macbook from a friend and she has forgotten the admin account password. so i cannot update any software or work out how to wipe it. does someone know how i would do this, not knowing this info, or having the original install