Can't access old external drives

I have past external Hard drives that I can no longer get to show up. I have upgraded my operating system since I used them. Would this be why I cant access them? If so is there a way I can access them. Please? and thank you!

The previous version of OSX was Lepord. I upgraged to Snow Lepord. Yes, I have shut all done, attached detached and changed cables. My computer will not recongnize the external hard drive as being attached. It is on and working but will not show up on the desk top or in finder or in disk utility. Not sure what SMC reset is so probaly haven't done that. Can not do disk repair as it doesn't show up for me to select an operation for.
Thanks Tom I will have a look at the link provided.
I am a photographer and have stored many images on these external harddrives and never thought of them when I upgraded the operating system.

Similar Messages

Can't Access My External Drive

My external drive was setup to allow access under my account name. I will be getting a new mac soon. I wanted to be able to use the external drive on the new mac. I accessed the external drive and set the permission to "system" to allow universal access. Somehow I managed to mess up permissions or something and I can no longer get access to the drive. I can see the drive using the disk utility but repairing the drive is grayed out. Not sure what to do? Help.

Hi Dansyacht, and a warm welcome to the forums!
Open Terminal & paste this in, spaces are important...
chmod 777 /Volumes/
then right after the last /, carefully type the name of that external volume, & if it has spaces in it enclose the name in quote marks.

Can not Access Backup external drive

Have a Lacie Mini HUB HD which I have been using for 3 years with little problem, suddenly the drive is not accesible, does not appear anywhere to be found and Time Machine can not be reset.
Symptoms: Blue power ON light is flashing, Power supply is hot. Is my External drive fried?
Help!

imacmanzano wrote:
Have a Lacie Mini HUB HD which I have been using for 3 years with little problem, suddenly the drive is not accesible, does not appear anywhere to be found and Time Machine can not be reset.
Symptoms: Blue power ON light is flashing, Power supply is hot. Is my External drive fried?
Hi, and welcome to the forums.
Sounds like it may be.
Disconnect and power it off and for several minutes, then Restart your Mac, reconnect and power it up.
See if you can repair it per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
If it doesn't show up in the Disk Utility sidebar, it's likely failed. LaCie might be able to tell you whether it's the drive itself or the power supply, but after 3 years, you're likely to need a new one.

Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

what format your iomega HD is it NTFS , if NTFS try download http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html

HT6012 Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud? When I try to open it, it says can't open because the file was iMovie 9.0.9. I just want to get it on Theater so I can watch on Apple TV and have in

Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud? When I try to open it, it says can't open because the file was iMovie 9.0.9. I just want to get it on Theater so I can watch on Apple TV and have in iCloud

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Old external drive; how to check for virus?

I`ve an old external drive from the time I was a Windows PC user. I just don`t want a virus on my macbook, so I want to make sure that the drive is clean, and wipe out all the deadly ****. So, what do I do? PS, I have really important stuff in there too, so I cant just reformat the drive.
S

Download and scan it with either Sophos or ClamXav. Not that Windows viruses can affect the Apple OS:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435
More useful information can also be found here:
www.thesafemac.com/mmg

Cannot access shared external drive on iMac from Windows 7

Used to be able to access this drive with no problem from any of my PC's. Sent iMac in for repair and system drive was wiped so I'm starting from clean install of Leopard. Did all the updates first including 10.6.4 which wasn't on before the system drive died.
Firewall is off
SMB is on
Everyone as well as main user has read write access to external drive
iMac is in the same workgroup as machine, although it wasn't before and it worked fine.
PC can ping the IP of the iMac and get a response, can see the iMac in list of networked computers
but cannot access anything on it.
Windows 7 network diagnostics says "file and print sharing resource (JMGIMAC) is online but isn't responding to connection attempts" "The remote computer isn't responding to connections on port 445
I've tried everything, any ideas
Josh

I am familiar with the instructions for sharing files and have followed them (several times I might add).
My problem is that the information that I place in the WINS tab ( in the Network Preference Pane) disappears when the iMac is re-started. This information (especially the Workgroup name) must appear when the computer re-boots. It doesn't and I have to re-enter the information in the iMac before I can access its files from a Windows PC.
I have searched the internet for days trying to find an answer to this question. Although the problem seems to be fairly common, no solutions have been found.

Problems moving library from old external drive to new one

I keep all my music on an external hard drive connected to my laptop at home. I am now spending several months away from home, and couldn't take my external drive with me.
I planned to handle this by using iTunes backup feature to put my whole library on DVD, then buy a new external hard drive to take with me, and sse iTunes backup feature to rebuild the library on the new external HDD.
However, I can't get the library to restore/re-load/re-import from the backup DVDs. The iTunes backup/restore instructions tell you to open iTunes then insert the backup DVD. When I do that, I get the following error message:
"The Disc "Backup2007-07-09" cannot be read. An unknown error occurred (-69)."
However, I can read the DVD using just going through My Computer, so I really don't believe it's a problem with the disc.
So, if this backup method isn't working, how can I re-create my library on the new hard drive? I have dozens and dozens of playlists, a lot of them smart playlists that depend on such things as play count, rating, and date added, so i really need to keep all my tags.
I thought of two possible work-arounds.
Plan A: Copy all the music myself (ie, not using iTunes) onto the new external hard drive, using the same filename and path as they had on the old external hard drive, then import the Library.itl file that's on the backup DVD (manually copying over the default one created by iTunes).
Would that work? The big annoyance of this plan, I should add, is that, looking at the files on the backup DVD, i can see that iTunes added a number behind each folder name (ie, "01 Al Green") and behind each album title (ie, "01 Al Green - Greatest Hits"). It seems to me I would have to go through and manually delete all the numerals in both artist and album names in order for the .itl file to point to the right place. That would take hours...
Plan B: (Really not a great plan, but I'm grasping here...)
Give up on the backup altogether. Keep adding music and podcasts to my library as is. All my music that is sitting on my far, far away home HDD will get the exclamation point next to it in iTunes. Then, when i try to sync the ipod, if i'm thinking this through right, iTunes will go ahead and add the new stuff to my ipod, but all the old stuff will just not copy over, and then at the end of syncing i'll get the error message to the effect of "itunes didn't copy song x because the file could not be found." This option is far from ideal, as my playlists won't update, but at least i'll still have the playlists.
Do either of these sound like they would work?
Any other suggestions?
Any help would be very much appreciated.

If you can you connect both external drives to the computer at the same time, it would be easier to use the "Consolidate Library" utility in iTunes to move (actually copy) your media to the new drive.
1- Open iTunes preferences and select the Advanced tab. Change the location of your iTunes music folder to a location on your new drive. Also select the options "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
2- On the iTunes menu, select Advanced/Consolidate Library. This will gather all your media and copy it to the new location (the folder you designated in step 1).
3- After the consolidation is complete, verify that your music still plays, and check "Get Info" on some items to verify that iTunes is looking at the new location.
4- Optional. Delete the original files on your external drive. Do this only if you are certain that everything copied over to the new drive.
5- Optional. Close iTunes and locate your "iTunes Library.itl" file. This is typically in your iTunes folder, which may be on your computer's drive and not the external drive. Move this file to somewhere on your new external drive. Next, hold the Shift key as you launch iTunes and you'll be prompted to "Create Library" or "Choose Library". Select "Choose Library" and navigate to where you put the "iTunes Library.itl" file. This is a one-time step that tells iTunes where to boot the library from.

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine.

How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.

This is not a supported feature of iPhone or Time Capsule.

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

I have an old external drive with a firewall connection-How do I use this on my Mac with it's USB3 ports?

Does your Mac have ThunderBolt ports?
There are ThunderBolt to FireWire adapters.
As far as I know there are no FireWire to USB 3 adapters.
Allan

How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)

How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)? Whenever I try it always wants to send things to my email address to confirm. I have a new apple ID and a new email address, I want to use this now for my iphone and my macbook air but I can't and I'v

Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

Started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility?

started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility. what to do?

Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

How can I access old Entourage emails to import them into Mac Mail after upgrading to OS Lion?il

How can I access old Entourage emails to import them into Mac Mail after upgrading to OS Lion? I don't really want to go back to Snow Leopard in order to access the old Microsoft Applications, but they simply aren't supported in Lion.

In Mail you can select Import Mailboxes... from the File menu. There is an import from Entourage feature.

How can I access a thumb drive plugged into an airport with my iPad?

how can I access a thumb drive plugged into an airport with my iPad? I am trying to set up an information point to serve weekly info over a NOT connected to the internet airport.

You can't. There are a couple of devices such as AirStash and the GoFlex drive that you can access over WiFi. They are limited, as I understand it, though.

Can't access old external drives

Similar Messages

Maybe you are looking for