Can't access OWA 2003 as well as no access via mobile devices

My Exchange server is able to send mail externally and receiving external mail but I can't access OWA as well as my mobile devices are not connecting to my exchange 2003 server running on server 2003 standard edition service pack
2. I keep getting "This page cannot be found. On my mobile devices its saying "No data received, unable to load the webpage because the server sent no data". Any help will be greatly appreciated.

Hi,
Please check whether ActiveSync is enabled.
Also check this KBs:
Troubleshooting Outlook Web Access logon failures in Exchange 2000 and in Exchange 2003
http://support.microsoft.com/kb/327843
Exchange ActiveSync and Outlook Mobile Access errors occur when SSL or forms-based authentication is required for Exchange Server 2003
http://support.microsoft.com/kb/817379
Thanks
Mavis Huang
TechNet Community Support

Similar Messages

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

See this support document http://support.apple.com/kb/HT5661

HT1926 I can't re install iTunes because I get a error saying mobile device could not start.

I can't re-install iTunes because i get an error saying Mobile Device could not start?

Same here TC, very annoying

Can iTunes show you which video content will play on your mobile device before you sync?

I believe a previous version on iTunes had this functionality. Now you have to go through the entire sync process before you know the video can not play on your device. Also, can you batch convert all your videos to play on a cross platform of devices, e.g. iPod, iPhone, Apple TV 2, iPad?
Message was edited by: sch6031

Don't know if this will help, but you might want to check your mp4 files against this :-
iPad Supported Video Formats & Movie Formats
    •    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    •    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    •    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How can I connect my touch to iTunes since it says "Apple Mobile Device has not started"?

My touch is not connecting to iTunes, i just bought mine yesterday too so it is brand new! I connected it to iTunes and it said apple mobile device has not started.. Help please!

See Here
AMDS for Mac
http://support.apple.com/kb/ht1747
AMDS for Windows
http://support.apple.com/kb/TS1567

Exchange 2013 Sp1 some users cant access owa

After I install new exchange 2013 with sp1 on windows 2012 R2 server one for mail boxes and the second Client Access, i move all mail boxes to it, then i uninstall the old server (exchange 213 with cu3).
All may exchange server’s virtual machines on hyper-v 2012R2
I install certificate and configure virtual directories
I notice some users can’t open there mail boxes from OWA they get a blank page after the enter username and password (from internal and external) (the same users can open outlook anywhere) at the same times many users can access owa.
After many restarts they can access OWA.
After some days some other users can’t access owa.
I remove ECP and OWA virtual directories, Then Recreate and configure it.
But the same problem some users cant access owa
I install a new client access server, configure it
But the same problem

HI
YOu can check below things to resolve the problem
Disable SSL from Default Web Site if you have enabled them
Check if you have set any redirection in the Default Website if so remove redirection and see the results
Ensure that you have a valid certificate for owa VD
check correctly the authentication type - windows authentication is enabled or if you have form based authentication enabled
Below is an example for enabling WA
set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
Set-EcpVirtualDirectory -Identity "servername\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Login prompt showing up on mobile devices on publishing anonymous access website

We have a website that is a publishing site using anonymous access. The website works fine except on a mobile device a login prompt pops up. if you press cancel the website works fine. It only happens if you go to the homepage. I
have ensured everything is checked in etc. Is there anyway to find out why this is happening?
Kristin

Hi,
For your issue, try to disable the mobile view:
Go to Site settings => Manage site feature => deactivate "Mobile Browser View"
Here are some similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/a25c4eac-5992-40c7-a3c1-3478c886b690/mobile-devices-prompt-for-creditials-while-accessing-publishing-site-with-anonymous-access-enabled?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/en-US/84e47f9a-8d4d-4ebc-87d2-aa4eefeb6c2e/mobile-devices-prompt-for-creditials-while-accessing-publishing-site-with-anonymous-access-enabled?forum=sharepointadminprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Can a user take part in video conference via mobiles e.g. smart phone, etc?

Hello Community
Using Lync Server can a user start or take part in a Lync Server video conference
via mobile devices like their smart phones, etc just as if they were sitting at their desks
taking part in the Video Conference?
Thank you

Hi Shabeaut
You can use Lync 2013 mobile clients which provide enhanced presence, IM, Lync meetings, and voice
and video calls over the Internet .
Check under category "Conferencing Support in Lync Mobile clients" to get all capabilities and features available for
Lync client
https://technet.microsoft.com/en-us/library/hh691004.aspx
Please mark it as answer if it helps you solving your problem.
Amit Kotha

Can't move Exchange 2003 mailbox to Exchange 2010 Resource forest (Linked Mailbox)

Problem Description:
Can’t move Exchange 2003 mailbox to Exchange 2010 resource forest
Error message:
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials.
Source Environment Configuration:
Active Directory
FQDN: umfolozi.local
Domain name (pre-Windows 2000): UMFOLOZI
Domain Function Level: Windows Server 2003
Domain Controllers:
Hostname
OS
Operation Master
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Schema Master, Domain Naming, RID, PDC
SRVUMVMDC01.umfolozi.local
Windows Server 2008 R2 Standard SP1
Infrastructure
Exchange
Version: Microsoft Exchange 2003 Standard SP2 Build 7638.2
Server Information:
Hostname
OS
TUSKUMFMAIL.umfolozi.local
Windows Server 2003 R2 SP2
DNS Zones
Zone Name
Zone Type
Domain Controllers
umfolozi.local
Active Directory-Integrated (Primary)
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
peermont.com
Secondary
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
Trusts
Domain Name
Trust Type
Transitive
Validated
peermont.com
Forest
Yes
Yes
Target Environment Configuration:
Active Directory
FQDN: peermont.com
Domain name (pre-Windows 2000): PG
Domain Functional Level: Windows Server 2008 R2
Domain Controllers:
Hostname
OS
Operation Master
SRVPGVMDC01.peermont.com
Windows Server 2008 R2 Std SP1
SRVPGVMDC02.peermont.com
Windows Server 2008 R2 Std SP1
Domain naming, RID, PDC, Infrastructure, Schema Master
Exchange
Resource Exchange Forest
Server Information:
Hostname
OS
Role
Version
Client Access Array
SRVPGVMEXCH01.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
SRVPGVMEXCH02.peermont.com
Windows Server 2012 Std
HUB, CAS
Version 14.3 (Build 123.4)
exchange.peermont.com
Hostname
OS
Role
Version
Database Availibility Group
SRVPGVMEXCH03.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
SRVPGVMEXCH04.peermont.com
Windows Server 2012 Std
MBX
Version 14.3 (Build 123.4)
PeermontDAG
DNS Zones
Zone Name
Zone Type
Domain Controllers
peermont.com
Active Directory-Integrated (Primary)
SRVPGVMDC01.peermont.com
SRVPGVMDC02.peermont.com
umfolozi.local
Secondary
SRVUMVMDC01.umfolozi.local
SRVUMVMDC01.umfolozi.local
Trusts
Domain Name
Trust Type
Transitive
Validated
umfolozi.local
Forest
Yes
Yes
Migration Process
Task
Description
Successful/Error
1
SYNC AD Domain account from source forest (umfolozi.local) to target forest (peermont.com) using BinaryTree SMART Directory Sync (ADMT can be used as alternative)
Successful
2
Create mailed enabled user
Successful
3
Run Prepare-MoveRepuest with –OverWriteLocalObject
Command Example:
.\Prepare-MoveRequest.ps1 -Identity [email protected] -RemoteForestDomainController SRVUMVMDC01.umfolozi.local
-RemoteForestCredential $RemoteCredentials -UseLocalObject -LocalForestDomainController SRVPGVMDC01.peermont.com -LocalForestCredential $LocalCredentials -OverWriteLocalObject
Successful
4
Submit mailbox request
Command Example:
New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeliveryDomain
"internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Credential "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True
Error
All the standard migration task works as expected until the mailbox migration move request is submitted. See move request verbose detail below:
[PS] C:\Windows\system32>New-MoveRequest -Identity "0fa7d17e-3637-4708-a51b-f14eaae17968" -BadItemLimit "50" -TargetDeli
veryDomain "internal.peermont.com" -TargetDatabase "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" -RemoteCredential (Get-Crede
ntial "umfolozi\svcmigration") -RemoteGlobalCatalog "SRVUMVMDC02.umfolozi.local" -RemoteLegacy:$True -Verbose
VERBOSE: [11:34:27.346 GMT] New-MoveRequest : Active Directory session settings for 'New-MoveRequest' are: View Entire
Forest: 'False', Default Scope: 'peermont.com', Configuration Domain Controller: 'SRVPGVMDC02.peermont.com', Preferred
Global Catalog: 'SRVPGVMDC02.peermont.com', Preferred Domain Controllers: '{ SRVPGVMDC02.peermont.com }'
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Runspace context: Executing user: peermont.com/Admin/Users/Admin
Accounts/Information Technology/SoarSoft/Johann Van Schalkwyk, Executing user organization: , Current organization: ,
RBAC-enabled: Enabled.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Beginning processing &
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Instantiating handler with index 0 for cmdlet extension agent "Admin
Audit Log Agent".
WARNING: When an item can't be read from the source database or it can't be written to the destination database, it
will be considered corrupted. By specifying a non-zero BadItemLimit, you are requesting that Exchange not copy such
items to the destination mailbox. At move completion, these corrupted items won't be available in the destination
mailbox.
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Searching objects "{c5d6ea95-07b3-4a52-9868-e41e808a76fe}" of type
"MailboxDatabase" under the root "$null".
VERBOSE: [11:34:27.362 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Current ScopeSet is: { Recipient Read Scope: {{, }}, Recipient Write
Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive Recipient Scope(s):
{}, Exclusive Configuration Scope(s): {} }
VERBOSE: [11:34:27.393 GMT] New-MoveRequest : Searching objects "0fa7d17e-3637-4708-a51b-f14eaae17968" of type "ADUser"
under the root "$null".
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Previous operation run on domain controller 'SRVPGVMDC02.peermont.com'.
VERBOSE: [11:34:27.471 GMT] New-MoveRequest : Processing object "$null".
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] No RequestJob messages found.
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MDB c5d6ea95-07b3-4a52-9868-e41e808a76fe found to belong to Site:
peermont.com/Configuration/Sites/Peermont
VERBOSE: [11:34:27.487 GMT] New-MoveRequest : [DEBUG] MRSClient: attempting to connect to 'SRVPGVMEXCH02.peermont.com'
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] MRSClient: connected to 'SRVPGVMEXCH02.peermont.com', version
14.3.178.0 caps:07
VERBOSE: [11:34:27.627 GMT] New-MoveRequest : [DEBUG] Loading source mailbox info
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Failed to reconnect to Active Directory server
SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that you have used the correct credentials. --> A
local error occurred.
VERBOSE: [11:34:28.844 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
Failed to reconnect to Active Directory server SRVUMVMDC02.umfolozi.local. Make sure the server is available, and that
you have used the correct credentials.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : F48FD74B,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
+ PSComputerName : srvpgvmexch02.peermont.com
VERBOSE: [11:34:28.859 GMT] New-MoveRequest : Ending processing &
Troubleshooting Performed
1. When submitting mailbox move request tried the following credential inputs:
1.1. DOMAIN\Username
1.2. FQDN\Username
1.3. userPrincipalName
2. Confirmed domain trust between source and target domain is in place and validated.
3. Confirmed name resolution in source and target domain is functioning as expected.
4. Confirmed network connectivity between source and target domain controllers as well as source and target exchange servers.
5. Tried to create new Linked Mailbox to account in source forest, can’t select Global Catologue via the wizard;
Tried to specify the credentials for the account forest and got the following error when tried to select Global Catalog from wizard:

The error talk about the credential. Did you check the credential
Did you tried this command?
New-MoveRequest -Identity "Distinguished name of User in Target Forest" -RemoteLegacy -TargetDatabase "E2K10 Mailbox Database Name" -RemoteGlobalCatalog "FQDN of Source DC" -RemoteCredential $Remote -TargetDeliveryDomain "Target
domain name"
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

User Unable to RDP in Win 2008R2 Due to Multiple Group Membership But Can RDP in Win 2003 Server

We have built a new application server with Windows 2008R2 where set of users are local admin (application owners) and we have same kind of application server
in Windows 2003 SP2 with same users as local admin.
Now in Windows 2008R2 servers these local admins are unable
to RDP and get ACCESS
DENIED whenever user tries to login but can login successfully in 2003 server.
Now, strange case is, I found these admin users group membership with more than 600 groups and they are able to login win 2008 server as well if I remove their
group membership to a minimum level say around 300.
This is so confusing for me as user can login in WIn 2003 server with highest group membership but not in WIn 2008.
We have applied Maxtoken registry also through GPO.
Any idea what are we missing here.

This has nothing to do with Directory Services so I will move to the General forum.
One thing to look at is to make sure that you have RDP enabled on these new 2012 servers.
http://winplat.net/post/2012/07/16/How-to-enable-Remote-Desktop-on-Windows-%E2%80%988%E2%80%99.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

OWA 2003 to Mail

How to move all mails and folders from OWA 2003 to Mail in Mac Book Pro? I did all and I can not see any mail in the inbox!

I found this article, it seems to mean the Mac must have a Certificate installed, issued by the person who runs the exchange server.
SJ promised full exchange support in OSX 10.6 next year, maybe this is a symptom of the failure of OSX to truly integrate into an Exchange environment.
http://www.msexchange.org/articles_tutorials/exchange-server-2007/mobility-clien t-access/accessing-exchange-2007-apple-macintosh-part-1.html
Maybe the big idea is to make Macs fit into a WinTel environment and a big push into the corporate environment next year.
FYI Address Book can retrieve addresses from an Exchange server, but leaves wide open the 'scope' of the searches it performs, so the Admin people won't allow it to connect to our hosted Exchange server otherwise I could search all their other customers address books.
Bill.

User unable to access OWA

User is unable to access OWA any pointers.. getting the below error pls Thanks
The item can't be opened because it's become corrupted.
Request
Url: https://ukexchange.abc.com:443/owa/lang.owa
User: Wes, Aurélia
EX Address: /O=abc/OU=London/cn=Recipients/cn=AWes
SMTP Address: [email protected]
OWA version: 14.3.123.3
Exception
Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
Exception message: Can't save invalid object Wes, Aurélia.
Call stack
Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostLocally(OwaContext owaContext, OwaIdentity logonIdentity, CultureInfo culture, String timeZoneKeyName, Boolean isOptimized, String destination)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostRequestFromProxy(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.PrepareRequestWithoutSession(OwaContext owaContext, UserContextCookie userContextCookie)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.AcquireAndPreprocessUserContext(OwaContext owaContext, HttpRequest request)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext owaContext)
Microsoft.Exchange.Clients.Owa.Core.OwaRequestEventInspector.OnPostAuthorizeRequest(Object sender, EventArgs e)
System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Inner Exception
Exception type: Microsoft.Exchange.Data.DataValidationException
Exception message: The property value Aurélia Wes is invalid. The value can contain only 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '"', ''', '(', ')', '+', ',', '-', '.', '/', ':', '?', ' '.
Call stack
Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()

Hi,
We can use the New-MailboxRepairRequest cmdlet to detect and repair mailbox corruptions. For more information about it, please refer to:
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Had to uninstall mobile device helper because a window kept coming up every 45 sec. saying it had stopped working. It wouldn't stop and online support said uninstall it.Well I did,now if I want to access iTunes store it pops up the iTunes has stop working

Was advised to uninstall mobile device helper because a window kept popping up about every 45 seconds saying it had stopped working.Uninstalled it that took care of that problem,but now I have a new one.I can't access the iTunes store.Every time I click the store icon a window pops up saying iTunes has stopped working.Any suggestions anyone.

anyone?
*i've managed to download quicktime, but am still unable to download itunes. after reaching a certain point in downloading itunes, (about 1/3 of the way?) it stops at "copying files", and my computer freezes and i have to hold the power button in order to shut it off and do anything, or i get a popup asking me if i want to change something so itunes can finish downloading. i click "yes", but then the download stops completely and i get a message saying "itunes has finished downloading, but with errors" and it tells me to download it again.
a popup from MobileServiceDevice keeps appearing as well, but it won't go away. the details are:
Problem Event Name:    APPCRASH
Application Name:    AppleMobileDeviceService.exe
Application Version:    17.88.0.7
Application Timestamp:    4e66ceff
Fault Module Name:    kernel32.dll
Fault Module Version:    6.0.6002.18005
Fault Module Timestamp:    49e038c0
Exception Code:    c06d007f
Exception Offset:    0001e124
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Information 1:    fd00
Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
Additional Information 3:    fd00
Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
but the fault module name changes on me. sometimes it's kernel32.dll, and sometimes it's something else, and i've already tried using task manager /find str but it doesn't help.

Restriction user to access owa outside the organization

I need a policy that a specific group of user, they can access owa in inside the organizational network but when they go outside they cannot access owa outside network.
if possible please suggest

Hi,
Based on my research, we can block selected Users external OWA access by change the files
startpage.aspx and basicmessageview.aspx
For more information, you can refer to the following article:
http://blog.leederbyshire.com/2012/11/27/block-or-allow-selected-users-depending-on-location-in-microsoft-exchange-2010-outlook-web-app/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support

Can't view OWA email size

We have Exchange 2010. Our OWA users are not able to see the size of emails easily. We can sort by size...but in OWA 2003 the size of the email was listed by default.
Any ideas?
Thanks

Hi,
To see e-mail’s size please switch OWA to light version.
Logon OWA.
Select options > all options > settings > general
Check use the blind and low vision experience.
Logout and logon gain.
Best Regards.

Can't access OWA 2003 as well as no access via mobile devices

Similar Messages

Maybe you are looking for