Can't access replies to my posts?

It seems I am "unauthorized" to see replies to previous questions/comments I have posted. Why is this?

If it is your posts that are being removed, the Hosts will have sent you an email explaining which specific part of the Terms of Use were violated by your post.
Of course, you read the Terms of Use before agreeing to them when you signed up but, should you wish to refresh your memory, here's the link:
https://discussions.apple.com/static/apple/tutorial/tou.html
Best of luck.

Similar Messages

Can't access localhost - tried all posted solutions I could find!

Hello,
I'm running an Intel iMac that came installed with Leopard. I set up my localhost server a year or two ago when I was in a different location and then didn't use it for a while. Now I can't seem to access my localhost page!
To start, I've tried a lot of the solutions I've read online.
Here's some info about the setup:
1. PHP is enabled and running
2. Both the /etc/httpd/users/yourusername.conf and /etc/apache2/users/yourusername.conf files are configured to Allow all
3. The Sites directory is configured to Allow all in the etc/apache2/httpd.conf file
4. permissions for my sites folder are set to 777 (read & write for everyone)
5. apache's group is set to www
6. I have set up an alias which is the same as the name of my computer and the root directory is a folder located in the Sites folder
7. The /etc/hosts file is configured for this alias with the IP 127.0.0.1 (localhost)
8. To access the localhost page, I've tried http://computername.local - http://localhost/~user - http://IPaddress and http://IPaddress/~user
I've tried everything and still the localhost page returns a 403 Forbidden page. Anyone know how to fix this problem? Maybe it's something really simple that I'm overlooking? I have changed locations since I last used it and therefore I'm on a different wireless network, but provided by the same service provider and router (don't know if this is important). Please help!
Thanks so much,
-Neal
Message was edited by: Nealo

Hi!
My question was answered. It was a simple solution so I feel very silly. I just had to change permissions for my Users/username folder (since apache needs access to each directory leading up to the localhost root directory). Thanks so much for your help!

My iPad mini, can only access camera roll photos. When posting on facebook. I can not access shared photos from my apple devices.

problem with iPad mini and iPhone 5c and Facebook app. I can only access camera roll, when posting photos, I can not see shared photos. Which I could before the previous 3 updates. I did speak to Apple support but they said Facebook was behind. i think over 6 months later I still have the same problem!

Thank you. Do you have any idea about the 5c, which is only 2 weeks old. Before this I had an iPhone 4, and you could choose which collection you wanted to post from,
but my 5c is also only showing camera roll, pehich is rather annoying to say the least!

How can i access the stepname within a steps post-expression?

How can i access the stepname within a steps post-expression?
i only saw the step-id of the step: Step.TS.Id
is there a pssibility to get the stepname from the id?
thank you!

Hi Fischer,
use the expression NameOf(Step).
Regards
Ray Farmer
Regards
Ray Farmer

How can i access attribes in post-exit?

We can enhance a class by pre-exit and post-exit.
But How can I access attributes of class in post-exit code???

We can enhance a class by pre-exit and post-exit.
But How can I access attributes of class in post-exit code???
I am little confused , did u mean after the user actions , u want to acess ur attributes
use the WDDOAFTERACTION to access attributes thn using classname=>attrbute
regards,
amit

I can't access my old Apple ID, can you please delete the account or posts?

I can't access my old Apple ID. Before the big account switching, I naively posted my email in a post in a topic here a while back.
Now it comes up in search results and I don't want to attract any spam. I want to either remove this old account or at least wipe some of the posts I made under the name. Not sure where else I can possibly post this question, totally apologize if it appears rather rude.
Thanks,
Message was edited by: css1323

You're Welcome css!
"While you may not be able to delete the account."
As a user/member of  Discussions like your self I have no removal powers at all.
But in that Thread I notified the Hosts of your address removal request.
"Btw, is there a way to PM here?"
Only if a member posts an Email address in their Profile.
ali b

Can't Access One of My Network Computers via Windows (File) Explorer

I've just installed a new router (Linksys EA3500 Dual Band) to replace my old (Linksys WRT100), but can't imagine how that could cause this trouble, except that prior to installing the new router, all worked properly. I have three Workgroup computers
on my network, one running Win 7 Ultimate 64bit (call it Tower-755, an older laptop upstairs running Win 7 Pro 32bit (call it MommaDell), and a super laptop running Win 7 Pro 64bit (Call it M6600). On Tower-755 I have a mirrored Raid1 drive - call
it Z: - that I share over the net (i.e. Everyone = Read/Write).
Since installing the new router, when I open File Explorer on M6600 or MommaDell, I can see - in the search pane (under Network) - all three computers, and when I click on MommaDell, its shared folder is accessible, but when I click on Tower-755
I get an error saying, "Windows cannot access
\\Tower-755, yet I can ping it successfully from a command prompt.
However, when I open File Explorer on Tower-755, although I can see all three computers in the search pane (under Network), I can't access any of the three (including Tower-755 itself); I get the same error message, although I CAN ping them from a command
prompt.
Also, and I'm not sure if this related, in the search pane under HomeGroup on all three computers, I can only see MommaDell.
I've checked and double checked all my router settings, including the IP Address range (192.168.1.2 - 51). I also have a Domain Controller server with two joined workstations on the net, so I have a static IP in order to be able to access the server
and/or workstations remotely when we travel.
That's my story and I'm stuck with it, but I'd sure be grateful for any help with this mess.
Capt. Dinosaur

Hi Capt,
In order to help you analyze your issue, we need confirm some situations.
1. Did these 3 computers all join the same HomeGroup or Workgroup?
Yes
2. Domain Controller server with two joined workstations you mentioned, did it mean two of these 3 computer joined the domain environment?
No. Those are separate computers in their own domain, just using the same network.
3. Did you ping via IP address or computer name?
Both, but this morning something is different.
a. MommaDell and M6600 can ping each other both by IP and Name, but can't ping Tower-755 either way.
b. Tower CAN ping both MommaDell and M6600 both ways.
According to your description,
Tower cannot ping MommaDell and M6600.
No, Tower CAN ping both MommaDell AND M6600 both by ip and name.
MommaDell can ping Tower.
M6600 can ping Tower.
Both of the above was true yesterday, but not this morning.
Please check if MommaDell and M6600 could ping each other.
Yes they can
And make sure all of them turn on the network discovery and turn off the firewall temporarily for test:
Network Discovery is ON in all three machines, and Windows firewall is always off because I have ZoneAlarm on all three machines.
Enable or disable network discovery
Which?
http://windows.microsoft.com/en-in/windows/enable-disable-network-discovery#1TC=windows-7
If it doesn't resolve, please post every computer's ipconfig /all output here for analysis.
it's 7:30 and I have to be out until 2:30. I'll do the posting then, and thanks for the help.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Capt. Dinosaur

Adobe put CS6 Extended on computer as trial now can't access regular cs6

Adobe messenger had an update. when I updated it turned out to be a trial version of PS CS6 Extended rather than my original Photoshop CS6. Now trial is over and I can not access my original photoshop CS6 program. Only option is to purchase the Extended version on line on the Cloud.

I have re-entered the serial number for my original CS6 and it is back working again. Thank you all for your quick responses. I was afraid I was up the creek with no water running.. (: All is good now.. Ed
From: gener7 <[email protected]>
To: Edward Leonard <[email protected]>
Sent: Sunday, April 26, 2015 6:38 PM
Subject: Adobe put CS6 Extended on computer as trial now can't access regular cs6
Adobe put CS6 Extended on computer as trial now can't access regular cs6
created by gener7 in Photoshop General Discussion - View the full discussionPermanent license reverts to Extended Trial: This happens often. Don't panic. Your serial number is still good, you simply need to re-enter it and you do not need to purchase anything. Follow these steps: On receiving Trial/Trial Expired screenMake sure that you are onlineClick on license this softwarePerpetual product owners: Log in with adobe ID and enter product serial numberProduct should be licensed successfully If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7482967#7482967 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7482967#7482967 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop General Discussion by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can not access BIOS after update BIOS

Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS again

That is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Can't access photos in camera roll - camera and photo app crashes

Have iphone 4 with iOS 5.0. Took pictures but now I can't access any photo in the Camera Roll. When I now try to take a picture, Camera app crashes. If I try to access the Camera Roll via Photo App, it too crashes. Can't see the photos from iTunes either. Shows it as unknown data. Is there anyway to rebuild the photo library or remove a corrupted photo since I think that is the problem. Any help would be appreciated.

Thanks to Steve Kehlet who posted the solution that helped me and saved my day, https://discussions.apple.com/message/16405821#16405821
Follow the link:
http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
You will need to download PhoneView, but the free 7 day demo does the job - and my camera and photo app are up and running again!

I get a 'prohibited symbol' when I try to startup my iMac, can't access computer. How to proceed?

Hey guys,
So my iMac has had its first real problem since I bought it in 2010.
Yesterday I was browsing the internet on my iMac via tethering from my smart phone (Samsung galaxy ace, on vodafone, if that means anything) when suddenly it froze and I got the colourful spinning loading wheel and couldn't click on anything. This went on for long enough that I lost patience and turned off the Mac (by holding the power button) with the intention to start fresh. Nope, now I can't access my desktop anymore. Now, whenever I turn my Mac on it I see the grey screen with apple logo with the spinning loading thing under it, this lasts about 30 seconds and then it shows me a 'prohibited symbol' (i.e. A circle with a stroke in it). I then have to turn the computer off, and this repeats when I try startup again.
Now, after some googling a found that this is probably a "kernel panic". But the problem is that none of the solutions I've read seem to work.
- I tried booting in safe mode by holding shift but it didn't seem to activate it..? (and I know its not a problem with the keyboard because I tried starting up and holding alt and that worked)
- I also tried booting from my installs disc but that didn't work either, it just loads for a while then it gives me the prohibited symbol again.
- I also know its probably not a problem with my hardware because everything is unplugged except my USB mouse.
Some other facts:
- I'm running Mac osx 10.6.2 (its all I've ever run, never updated)
- strangely, the windows partition of my hard drive works fine. I just hold alt and then can still access windows. But then as soon as I try to tether the internet from my phone again, it works for about 2 minutes and then I get a quick bleu screen and the comp restarts, which makes me think this kernel panic was induced by furthering my internet.
- On one of my startups yesterday I got a flashing folder icon with a question mark on it, all the other times its been the prohibited symbol.
I have a time machine hard drive that I can resort to if worse comes to worse, but the last time I backed up was about 2 months ago, which means id lose my creative work from the past 2 months (im a musician and ive been working on an album), which is obviously not preferable.
Any help would be GREATLY appreciated! Please let me know id you need anymore info.
Cheers,
Nic

@sanjampet: I have already read the link you provided and none of the solutions work, which is why I posted here.
Safe mode just doesn't activate. I hold shift for as long as possible until eventually I get the prohibited symbol. When I hold shift I see the apple logo and loading icon and then eventually prohibited symbol, its as if I wasn't holding shift at all, which makes me wonder if the shortcut is even correct? And I know its not a problem with my keyboard or my timing of pushing shift because holding alt/option works as usual.
Holding C to load from the installs disc doesn't work either, which eliminates all the solutions based on that. Its the same as safe mode - I hold the button until I eventually get prohibited symbol.
I also tried selecting my Mac hd via holding alt key - same result: prohibited symbol.
I also tried selecting my installs disc via holding alt key and a strange thing happens: I see the apple logo and loading wheel but this time it is stuck on the apple logo and loading spin thing for about 20 minutes while there is lots of noise and activity coming from the CD drive..
I also tried resetting the NVRAM/PRAM, which DID seem to have an affect (screen was brighter + startup sound was louder) but I still see the prohibited symbol like all the other times.
I'm yet to be able to get past the prohibited symbol, the only way around it so far is to load the windows partition if my HD.

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Restrict Access in OB52 by Posting Period Variant

Hello,
In our company there are many posting period variants. We want to restrict the access for opening and closing posting periods in OB52 by Posting period variant. i.e. User can open/close for a specific posting period variant and not all.
On searching on this forum, i found some solutions saying that one can create Screen variants according to Posting period Variant but i am not very clear on it.
It would be very helpful, if someone can provide detailed solution for this scenario; or share one's experience on this.
Thanks and regards,
Ankur

Inside OB52, the last column on the right is titled AuGr. Expanded, that stands for Authorization Group. Hit <F1> after keeping the cursor in that field and read what SAP has to say about that field.
That is the answer to what you need - a posting period can be made available to only a limited set of users using the Authorization Group. You'll need to enlist the help of your resident BASIS team members for putting this into use.
Remember to assign points if found useful.
Regards,
Gulshan

Can we access report date wise?

hi all
can we access report date wise if yes then plz guide me?
i made two text items,one for start date and second one for end date in form.if i issue date in these two text items like this
start date: 01/08/2009 End date: 08/08/2009 and after pressing the when_button_pressed and it give me the report up to giving date,is it possible?
plz help me and guide me more
thanks in advance
sarah

hi sir
sir i got an error in the following code
SET_REPORT_OBJECT_PROPERTY(rep, REPORT_OTHER , 'P_START="' || TO_CHAR(:BLOCK.START_DATE, 'DD.MM.YYYY') || '" P_END="'|| TO_CHAR(:BLOCK.END_DATE, 'DD.MM.YYYY') || '"');
here is the error:" to many declaration of 'To_char' match this call"
my table name is date1
and table structure is
name
address
start_date
end_date
and i used this where query WHERE COLUMN BETWEEN TO_DATE(:P_START, 'DD.MM.YYYY') AND TO_DATE(:P_END, 'DD.MM.YYYY') in the form where caluse
i am using u r codes for displaying report which one you posted yesterday
sarah

Can't access replies to my posts?

Similar Messages

Maybe you are looking for