Can't access secure Wi-Fi after updating to Safari 4

Anyone else having a problem accessing their wireless internet connection through airport after upgrading to Safari 4? I'm having severe trouble. This is the only thing I can think of - I installed the update last night, and this morning I can't access my own wireless network - my husband's computer and our Xbox and Wii still have access to the internet. Any ideas? It keeps saying "there was an error while trying to connect to the network."

Anyone else having a problem accessing their wireless internet connection through airport after upgrading to Safari 4? I'm having severe trouble. This is the only thing I can think of - I installed the update last night, and this morning I can't access my own wireless network - my husband's computer and our Xbox and Wii still have access to the internet. Any ideas? It keeps saying "there was an error while trying to connect to the network."

Similar Messages

  • I can not access my webmail now after updating to 2.0

    I used to be able to access webmail from "eastlink.ca" , but after updating to 2.0 everytime I try either via the bookmark or by direct Entry the PB brower closes and returns me to the home screen?  Why?

    Interesting... I just tried going to webmail.eastlink.ca and my PlayBook browser shut down altogether...
    But have you tried simply adding the Eastlink email account to your PlayBook? This doesn't address the issue, but is a way to access your email on your PlayBook.
    I'm not sure what the specific issue may be... But it's likely that the browser has not been optimized for the PlayBook which is causing it to shut down the browser.
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • I can not access my iphone(3Gs) after update my software from 4.1 to 6.1.3

    this message appered after update
    your iphone could not be activated.........................

    That's because your phone is jailbroken, right?

  • Can't Access Windows 7 Partition after updating OSX to 10.8.2 - Will I be able to get my data back?

    Itys does not appear in the boot list after holding down alt.  I can still see it in disk utilities as a 66GB partition but it can't be veriefied or repaired from there.  Any assistance in this matter would be greatly appreciated.

    You'll still be able to access it unless a problem occurs. Back everything up first.
    (114769)

  • I can't access my Aperture Library after updating to 10.6.8

    After OSX 10.6.8 update Aperture is unable to open one of my current libraries because of 'incorrect permissions'.
    I can't change the permissions as they're greyed out.
    Help?

    Are you logged in using an Administrators account?
    When you write that the permissions are grayed out what are you referring to? If you could attach a screenshot of what you are seeing it might help.

  • How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

  • Can't Access Secure (HTTPS) Sites On One Account, FF or Safari???

    Hello Mac Fans
    First let me say I'm new to Mac. On one account I can't access secures sites like I can in the admin account. This may be a function of rights but am not sure? All updates have been done.
    I can't login to this forum, my MobileMe account or my bank for example. I had to change to my other account or gasp, use a PC to post this message.
    I installed FireFox trying to isolate the problem to Safari but that didn't pan out, I can't get to HTTPS pages in FF either.
    I turned off Little Snitch thinking I might have denied something by mistake but that didn't help. I checked the rules and found nothing that wasn't allowed.
    Nothing was changed in the router. I just turned on Mac and it worked. The iMac is connected to the router via ethernet cable.
    I've used the search function and tried a few things that have been recommended for others but they didn't help me. I went to the keychain and did a repair, although it didn't find any problem. I over rode a couple keys to always allow them (Apple site stuff) and I ran the disk utility to no avail.
    For reference I will post the information for both Safari and FF.
    Safari:
    Safari can’t open the page “https://support.apple.com/cgi-bin/WebObjects/ACAuthWeb.woa/wa/login?
    appIdKey=2ddbca23a85d20e5bf7478812379ae23&path=/login.jspa%3FsuccessURL%3D/index .jspa” because Safari can’t
    establish a secure connection to the server “support.apple.com”.
    Safari can’t open the page “https://www.mln'sbank.com/” because Safari can’t establish a secure connection to the server
    “www.mln'sbank.com”.
    Safari can’t open the page “https://auth.apple.com/authenticate?service=DockStatus&realm=primary-
    me&returnURL=aHR0cDovL3d3dy5tZS5jb20vd28vV2ViT2JqZWN0cy9Eb2NrU3RhdHVzLndvYS93YS9 0cmFtcG9saW5l&destinationU
    rl=” because Safari can’t establish a secure connection to the server “auth.apple.com”.
    FireFox:
    The connection was interrupted
    The connection to support.apple.com was interrupted while the page was loading.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    I've done a lot of snooping around on this forum and have ran out of ideas so now I must ask for help.
    Thanks
    Message was edited by: MLN1963

    I think I may have found the problem. It's embarrassing to find it minutes after posting the message yet I tried to solve it off and on for three days! My brother who is a 20 year Mac user has been trying to help me too. I guess it's true what they say... sometimes it's better to be lucky than good. LOL
    I turned off the parental controls. What I don't understand is that the no website restrictions box was checked. To me this means I should be able to go to any site I wanted. Can anyone explain why I couldn't got to a HTTPS page on a parental controlled account even though there were no restrictions placed on it?
    It's late and I need sleep. I'll leave this open for now until I have more time to test it.

  • Can't access i tunes store after downloading ios7 on i phone 5

    can't access i tunes store after downloading ios 7.0.1

    I think that you will find your answer amongst the other "problem reports" for Safari 5.1 and iTunes 10.4. If you can use your Time Machine to revert to the day before you installed iTunes 10.4 (and Safari 5.1 - if you updated Safari too) you should wait for answers to other's complaints. There is a little known maxim at Mac; don't update an app or the operating system until you find no further problems reported at MacFixit, finetunedmac and Apple's own Support forums.

  • Can only access emails through OWA after migration from exchange 2007 to 2013

    can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
    needed RCA ... plz help..

    Hi,
    From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
    In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Hi, may i know how can i get all data back after update ios 6

    Hi,
    May i know how can i get all data back after update ios 6 and all my data lost ?

    You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
    apl

  • Strange WLAN issue - can't access secure sites

    Hi!
    I've just bought a Toshiba L100-120. Everything is fine except the following.
    I can't access secure sites with the built-in Intel 3945abg device. Other sites are OK.
    If i connect LAN, everything is fine. If I insert my PCMCIA-wireless card, also everything works. The only problem is: to access secure sites with the Intel wireless device.
    I already changed the drivers, I tried everything. It's very strange :(
    Many thanks if anybody has an idea!!!!

    Hi
    Im a little bit confused. Do you mean the secured WLan or secured internet websites????
    If you cannot enter the secured, encrypted WLan you need to enter the right key.
    In other case if some websites are not displayed you could try to change the IE privacy settings for the Internet zone.

  • Can't access my video meetings after Lion install Flashplayer will not let me accept or deny

    I can't access my online meetings after installing lion.  Flashplayer will not let me accept or deny.

    Yes I have tried everything.  Talked with support on the phone and all they could say was it is adobe Flash players fault.  They had no idea how to fix it.

  • How can i access security settings to stop PDF being copied?

    How can i access security settings to stop PDF being copied?
    I'm trying to secure my documents so others can not convert file to word or copy and paste information to edit

    Keep in mind (and Acrobat will alert you to this fact) that protections that you set in Acrobat are enforced by all Adobe products but the 3rd-party PDF Viewers may ignore them. There are even Web sites that will strip protections that you set in Acrobat. This is not a reliable technology these days. Acrobat keeps it mostly for backward compatibility for those users who use only Adobe Acrobat/Reader.

  • I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    There is this offer of a trial version FC Pro X with 30 day runtime:
    http://www.apple.com/final-cut-pro/trial/
    Too bad you didn't have a complete backup that could run the previous OS X
    and then you could resume using an earlier Final Cut Pro (10) or (7) since a
    clone would have been a means toward that position.
    http://www.apple.com/support/finalcutpro/
    http://www.apple.com/support/pro-apps/
    This appears to be another good reason to check out all the reasons why one
    would want or need to upgrade a working OS X version, since these kinds of
    events are known to happen as a direct result.
    Sorry to not have an answer to this, other than try & use the Trial version...
    Or see if someone at Apple sales/support can field your issue w/ an answer.
    Good luck & happy computing!

  • Can't open mail after updating to Safari 7.0.6.

    I can't open my Mail after updating to Safari 7.0.6.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • What is the advantage of using DataSourceUpdateMode.OnPropertyChanged for databinding winform c#

    first see my code public class Car : INotifyPropertyChanged private string _make; private string _model; private int _year; public event PropertyChangedEventHandler PropertyChanged; public Car(string make, string model, int year) _make = make; _model

  • Error while deploying ADF application

    Hi All, We are getting another error in SOA application Whenever tried to deploy the ADF application file (.EAR) into soa_server1, it given me invalid soa archive error. Please help.

  • How to give Serial numbers

    Hi Seth,     My problem is..I do not want to activate "Batch management" but i would like to allocate number for my material during GR.. To be more specific  I am getting in 10 coils in my company,now during GR i want to give 1 to  10 numbers to each

  • How do I get 9ias to recognize my servlets?

    Hi, How do I get my 9ias to recognize my servlets? I have modifed my jserv.properties to define the location of my properties file : # Configuration file for each servlet zone (one per servlet zone) # Syntax: [servlet zone name as on the zones list].

  • How to set  Date in input field by hard coding in application

    Hi all, 1.I have to make a date(its my choice to set the date) to appear in input field which is date type. 2.How to compare two numbers of type decimal. for example greatest of two numbers urgent requirement