Can't Access Some Local IP Addresses on VPN

Running OS X.4.8 Server, and connecting to the VPN from OS X.6.4
I've had a problem for a while in which when I am connected to the VPN from "outside" the router, I cannot connect to or ping certain machines, although I have no problem with others. Pressed for time, I worked around this by just setting up port forwarding on the router and connecting to the machine directly.
Today I noticed that I cannot connect to some machines that I COULD connect to last week! I am not aware of any changes to any of the machines involved that would explain this.
What is the best way to diagnose and resolve this issue?
Turning off the firewall on the server does not alleviate this problem.
Thanks for any advice.
Fitzbew

MrHoffman wrote:
All IP addresses on the LAN served up by the VPN should be coming out of the 192.168.1.xxx pool.
That causes problems with the typical subnet use for most coffee shops and home networks on the planet; that's a very common subnet for folks to use, and having the same subnet in use on both ends of the VPN will cause IP routing problems.
It's common practice to use a subnet further up the 192.168.0.0/16 block, or a subnet somewhere within 10.0.0.0/8 or somewhere within 172.16.0.0/12; in the other private blocks. (If you should lack sufficient public static IP addresses for your needs, obviously.)
Curious -- I can't reconfigure the LAN in any kind've reasonable time period but what if I change my local (home) IP address range? Do you think that will clear up the problem?
Thanks,
Fitzbew

Similar Messages

  • Can't access some websites and speed problem

    Hi guys,
    I hope to find some help here please as I am desperate! 
    It has been a week now that I am having problems with my broadband, suddenly I can't access some italian's websites (which I was able to access before). The browser tries to load up the page but nothing happens (it doesn't even give me an error). I tried those website on both my laptops (one windows and one mac) and on 3 different browsers but I have the same problem. 
    I even tried to use Google DNS on my mac but that didn't solve the problem, I have already tried to reset my BT home hub but again that didn't help.
    Any ideas?
    The other thing is that my broadband speed is really strange, because before it used to be very fast during the day (500-600 kb/s download) and really slow during peak-hours (which I know is normal). But for the past month it has been really slow (70kb/s download) even during the day, it has some brief moments when it's slightly faster but not as fast as before. Any suggestions on what would be the problem or what I can try?
    I will really appreciate your help.
    Thank you all 
    Robbie

    Blade79 wrote:
    Thanks for your reply.
    These are 2 websites I know I can't access:
    www.deejay.it
    www.gazzetta.it
    These are the adsl stats from my router and the speedtest:
    I hope this helps,
    Thanks a lot
    Robbie
    Hi there,
    Both sites load almost instanty for me on my Infinity connection.
    Below's a traceroute output
    Last login: Tue Nov 30 18:02:04 on ttys000
    ds9:~ Kev$ traceroute -I www.gazzetta.it
    traceroute: Warning: www.gazzetta.it has multiple addresses; using 194.20.158.242
    traceroute to www.gazzetta.it (194.20.158.242), 64 hops max, 72 byte packets
    1 api (192.168.1.254) 1.083 ms 0.672 ms 0.637 ms
    2 217.32.146.68 (217.32.146.68) 6.721 ms 6.462 ms 6.458 ms
    3 217.32.146.110 (217.32.146.110) 8.307 ms 8.792 ms 8.140 ms
    4 213.120.177.42 (213.120.177.42) 7.336 ms 7.540 ms 7.961 ms
    5 217.32.24.30 (217.32.24.30) 7.040 ms 7.009 ms 7.224 ms
    6 217.32.24.178 (217.32.24.178) 7.280 ms 7.126 ms 7.241 ms
    7 acc1-10gige-0-2-0-4.l-far.21cn-ipp.bt.net (109.159.249.97) 7.724 ms 7.619 ms 7.111 ms
    8 core1-te0-4-0-6.ealing.ukcore.bt.net (109.159.249.1) 8.806 ms 8.123 ms 8.569 ms
    9 core1-pos1-0-0.telehouse.ukcore.bt.net (62.6.201.82) 8.686 ms 8.687 ms 8.642 ms
    10 ge-0-0-1.londra32.lon.seabone.net (195.22.209.45) 8.965 ms 8.785 ms 8.998 ms
    11 te4-1.milano52.mil.seabone.net (195.22.205.255) 33.067 ms 33.454 ms 33.081 ms
    12 infracom.milano52.mil.seabone.net (195.22.205.62) 32.753 ms 33.112 ms 32.629 ms
    13 milano-1-tge-3-1.ita.tip.net (62.196.4.250) 34.502 ms 34.290 ms 33.722 ms
    14 * * *
    15 *^C
    ds9:~ Kev$ traceroute -I www.deejay.it
    traceroute to www.deejay.it (213.92.16.220), 64 hops max, 72 byte packets
    1 api (192.168.1.254) 1.066 ms 0.634 ms 0.673 ms
    2 217.32.146.68 (217.32.146.68) 6.687 ms 6.515 ms 6.647 ms
    3 217.32.146.94 (217.32.146.94) 7.512 ms 7.312 ms 7.501 ms
    4 213.120.177.34 (213.120.177.34) 7.361 ms 7.232 ms 7.339 ms
    5 217.32.24.30 (217.32.24.30) 6.593 ms 6.573 ms 6.927 ms
    6 217.32.24.178 (217.32.24.178) 7.148 ms 7.152 ms 6.948 ms
    7 acc1-10gige-0-2-0-7.l-far.21cn-ipp.bt.net (109.159.249.103) 7.578 ms 7.565 ms 7.629 ms
    8 core2-te0-4-0-6.ilford.ukcore.bt.net (109.159.249.5) 8.223 ms 8.114 ms 8.850 ms
    9 transit2-xe-0-1-0.ilford.ukcore.bt.net (194.72.20.250) 43.650 ms 7.958 ms 8.104 ms
    10 t2c2-ge8-0-0.uk-ilf.eu.bt.net (166.49.168.113) 8.729 ms 8.506 ms 8.561 ms
    11 t2c1-p3-1-1.uk-lon1.eu.bt.net (166.49.164.97) 8.668 ms 8.553 ms 8.333 ms
    12 t2a1-ge4-0-0.uk-lon1.eu.bt.net (166.49.135.102) 8.736 ms 8.937 ms 8.829 ms
    13 166-49-211-38.eu.bt.net (166.49.211.38) 8.638 ms 8.829 ms 9.038 ms
    14 so-5-0-0.mil19.ip4.tinet.net (213.200.82.30) 37.702 ms 37.824 ms 37.312 ms
    15 inet-gw.ip4.tinet.net (213.200.68.22) 47.007 ms 46.396 ms 46.148 ms
    16 ge3-0-28.wf1-kwcore.wf.inet.it (212.239.110.34) 49.292 ms 49.117 ms 51.695 ms
    17 www.deejay.it (213.92.16.220) 47.686 ms 47.109 ms 47.052 ms
    ds9:~ Kev$
    I hope this info helps.

  • Can't access some sites when using Aiport Express, why?

    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine.
    When using my network cable to connect to internet everything works fine and I can access these sites.
    Firmware is current and I've tried reseting the router to factory defaults.
    Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout.
    When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual.
    I've tried changing DNS servers to use opendns servers instead, but to no use.
    I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista- or-windows-7/), but still can't access them through ping...
    I don't know what to do anymore.... any suggestions???
    Thanks

    Hi Punice
    first try to disable JavaScript from : Firefox button (or Tools menu) > Options > Content panel > '''UNcheck''' Enable JavaScript.
    if the above does not help check with a few malware/virus scan programs for virus. You need to use all programs because each detects different malware. Make sure to update each program to get the latest version before doing a scan.
    http://housecall.trendmicro.com/ - Trendmicro online
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/antivirus-partners/windows-xp.aspx
    check also for a rootkit infection with TDSSKiller.
    http://support.kaspersky.com/viruses/solutions?qid=208280684
    thank you

  • Can't access some secure sites through proxy?

    can't access some secure sites through proxy server on osx it just keeps going local authority couldn't be contacted, i had the same problem with parental controls, but now that is off and its still doing it, is there a setting or something i need to enable?

    In my original post, not today's, I had said I was having the issues on the Mini, running OSX 10.6.8 and Safari v.5.1.5 for my bank's pill pay. I should have been more specific as to which machine and OSX Safari browser I'm having the T-Mobile problem with. My mistake.
    It is on both the MacMini and now the Air too. A moment ago, I was able to log in to my.t-mobile.com on the Air, but after putting into my Bookmarks folder, I can't do it anymore. The Log in button comes up greyed out instead of green.
    I'm also still having trouble with my bank's bill pay section on both computers too.
    I wonder if it's related to the saving of the log in info or putting in the Bookmark Folder?

  • I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

    I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

    it may be your browser.  CHeck the folloinwg
    1) Turn on Compatibilty mode
    2) Security Options / Make it a local trusted site
    3) Turn of Protected Mode in the browser under Security
    and have you tried it from Chrome
    CHeers!
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • Can't access some websites using time capsule

    Everything has been working just fine with my time capsule and my imac and just today I couldn't access some websites for some reason. I tried many other sites including this one and can get to them no problem. I have been through all of the airport settings and trouble shooting and can't find any problems, also the other 2 computers and my blackberry can't access some of the same sites either, I am stumped. Does anyone out there have any idea whats going on? Thanks for your help!

    Welcome to the discussions!
    Suggest that you contact your ISP. It sounds like their DNS server is overloaded at the moment, but also unlikely that they will ever admit it.
    It wouldn't hurt to power cycle your complete network as well. Just power everything down, order is not important.
    Start the modem first and let it run a few minutes by itself.
    Then start the next device connected to the modem, probably your Time Capsule, and let it run a few minutes.
    Then start your computers and devices one by one the same way.
    Message was edited by: Bob Timmons

  • Can't access some shared files

    I have a computer here where the user can't access some shared files.  From the machine she normally uses, the folders are greyed out.  I've checked all the permissions, and everything is in order.  She was even able to access the folder from a different Mac.  The mac is fully patched, running OS 10.6.8.

    More Info:
    After trying multiple things, I have more info to solve the problem. 2 other computers (one is another iBook and the other is a PC) in the house, access the hard drive as advertised with no problems. The only thing that has changed on my computer recently is the replacement of a 1G iPhone with an iPhone 3Gs. This phone did some weird things when syncing, specifically with our photo programs. It locked up Nikon transfer and iPhoto was working strangely. I felt the best way to alleviate those 2 problems was to shut down my computer, and restart. This is when I encountered the problem with accessing the TC. Things are also a little bit more complicated because I use the TC as the storage medium for both iTunes Library and iPhoto Library, both of which I can't access given the current problem.

  • I can't access some websites

    I have a brand new macbook air and for some reason out of the blue I can't access some websites everything worked fine up till now.

    Down For Everyone Or Just Me -> Check if your website is down or up

  • I can't access some of my songs on iTunes with my Sonos wireless player.

    I can't access some of my songs on iTunes with my Sonos wireless player.  Sonos help says this is due to propriatary rules from iTunes that were eliminated after 2009 and there may be some upgrade possible, but iTunes is singularly unhelpful finding anything related to this issue.

    Hello ZaranessaZ
    If an app becomes unresponsive, then the next step would be to close out the app by following the steps in the article below.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Regards,
    -Norm G.

  • I can only access some webpages

    I have a wireless windows laptop that can connect to the internet fine, but my iMac, that is connected by ethernet cable through the wireless router can only access some. It can, for example, connect to this site, and yahoo, but can't connect to youtube, or mysace.

    1.the computer is connected via an ethernet cable to a netgear ADSL modem wireless router (DG834PN) which is then connected to the phone line.
    2. mozilla firefox
    3. yeah, i used safari, and i have the same problem
    4. ?
    5. Firefox can't establish a connection to the server at www.dharmasecrets.com.

  • I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc.

    I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc.  Who have ever found this problem,
    pls. help.
    The pop up error msg. is "Sorry, you don't have access to this page"

    Hi,
    According to your description, after you cleared job queue about force check-in then you can't access some pages in PWA.
    Maybe you need to check in the pages which has been checked out.
    If you have administrative rights, it is possible to override the check-out via the View All Site Content page:
    Site Actions->View All Site Content->Pages->Hover the item you want to check in, and from the context-menu (arrow-down next to the filename), choose "Discard Check Out"
    Besides, to troubleshooting the error “Sorry, you don't have access to this page”, refer to the following articles:
    http://sharepoint.rackspace.com/sharepoint-2013-troubleshooting-an-access-issue-with-a-custom-master-page
    http://technet.microsoft.com/en-us/library/ff758656(v=office.15).aspx
    In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
    https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • I installed Mac OS X v10.7 Lion and i can't access some of my application being disabled.  Can someone please help me what to do to get my applications back

    i installed Mac OS X v10.7 Lion and i can't access some of my application (disabled).  Can someone please help me what to do to get my applications back

    This will tell you if your apps are compatible:
    http://roaringapps.com/apps:table
    Thanks ... Ken

  • I can't access to the email address to reset password

    i can't access to the email address to reset my password due to the email address already deleted.
    why i cant just log in to my Apple ID to reset it? i don't know how to do now...

    orangecps
    I can't really tell exactly what is happening for you... just too little information.
    let me suggest:
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    From ChitlinsCC: "Keep It Short and Simple" - Take your time...
    There are many (maybe too many) paths to AppleID management, so more info about where you go and how you get there will help us help you.
    CCC

  • I enrolled in weight watchers online only to find out I can't access some of the options because I need adobe flash player is there anything I can do?

    I enrolled in weight watchers online only to find out that I can't access some of the tools I need because I need adobe flash player is there anything I can do. I've already paid for the service!!!!

    Send a stiff email to Weight Watchers to suggest they need to remove their software videos from the FAT and BLOATED Flash container and trim down to  HTML5 in the future if they want to stay on program.
    In the mean time you are going to have to employ work arrounds with your iPad.
    Try the Skyfire browser app, This can convert some flash content remotely into a viewable format playable by Quicktime on your iPad.
    Its not however guaranteed to work on DRM protected material and its very likely these Weight Watchers videos are so protected I am afraid to say.
    Other apps such as iSwiffer attempt streaming of flash but are slowed due to band width.
    You could also use a VNC type app such a Splashtop to stream direct from your PC to your IPad however sound is not guarranted to work with these apps.
    Finally the most satisfactory solution at the moment plunk yourself down in front of a PC/Mac or Linux box and watch the flash their.

  • TS3274 I can't access some web pages with safari like, forever 21, express. Even though I used to access them previously. Why?

    I can't access some web pages with safari like forever 21, express .com. Even though I used to access them previously

    Ashlee...
    Since the apps you mentioned require an internet connection try running the connectivity tests >  iTunes for Windows: Network Connectivity Tests

Maybe you are looking for

  • Help! Painfully slow broadband!

    Hi All! I'm in need of some help discovering why my internet has gone so slow it'd be faster back on dial up! I generally until Monday (29th) had speeds around 3Mbps but since then after doing speed tests I only appear to be getting around 0.5Mbps. C

  • Create/extend materials for new plant with new profit centers

    Hi. We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17? Regards, Kjettern

  • Errrors while buliding"\Desktop\Flash Player\Source" of AdobeAccess

    Hi, I am trying to rebuild the "AdobeAccessPro4-setup\Reference Implementation\Sample Video Players\Desktop\Flash Player\Source" by using "Flash® Builder™® 4.7" and Flex4.6 SDK, But I couldn't able to rebulid it because of following errors, Can anybo

  • Help!! Can not increase max_heap_size to 2048m

    Hi, I need to increase the max-heap-size parameter of my jnlp file to 2048m. The users absolutely need this as they get out of memory error with the current setup (1024m). But very strange thing happens. When I change the heap size, and try to launch

  • Price control "V" for Finished Material

    Hi, In implementation project i have created ZFIN for finished material type.And given Price control "S". But as per client reqirement i have to change that " S" into "V". Is there any effect for those material which already have been valuated with p